No video :(

RAM Promaster DIY - Easy on the road oil change - Extracting Oil, Reset Warning light - Part 2

Подписаться 4,7 тыс.

Просмотров 4 тыс.

50% 1

The full van build parts list is at thefrugalfacto...
Plans - www.etsy.com/s...
In this video I show what I believe is the easiest and best method to change your oil on the road. Extracting the oil and how to reset the oil change required warning.
Video link showing that extraction is better than draining: • Ram Promaster Oil Chan...
Products seen in video (affiliate links):
Oil Extraction Pump amzn.to/436hwHj
Stubby Rachet Set amzn.to/3IFGVzl
15/16 inch socket amzn.to/3Wxl9U0
24mm socket amzn.to/3ozjuRi
Oil Filter Cap amzn.to/3IFEzR2
Oil Filter amzn.to/3qbLgE7
Pennzoil Ultra Platinum Full Synthetic 5W-20 Motor Oil amzn.to/3q0dDF1
🔔 BE SURE TO HIT THE BELL TO BE NOTIFIED OF NEW VIDEOS!
__________________________________________________________________
➳ Social Networks
RU-vid: Frugal Factor
Instagram: / frugalfactor
Twitter: / frugalfactor
Website: www.thefrugalfa...
Email/Contact: www.thefrugalfa...
Postal Contact: Frugal Factor PO Box 2407 Minneola FL 34755
__________________________________________________________________
▼ ▽
Music: www.purple-pla..., Feelin Good, A Night Alone-TrackTribe
Music: Merry Go Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons...
Images: pixabay.com/
Disclaimer: These videos are for entertainment only. Frugal factor assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Frugal Factor is not a licensed professional of any type. Frugal Factor recommends safe practices when working on machines, tools and materials seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user. Always seek out licensed professionals for your particular use or application.
This description contains affiliate links that allow you to find the items mentioned in this video and support the channel at no cost to you. Frugal Factor is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.com. Thank you for your support!
#frugalfactor
#oilchange
#promastermaintenance
#vanlife
#vanbuild
#Frugalfactor
© The Frugal Factor 2023. All Rights Reserved.

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@davidbaer4381 Месяц назад

Great video. makes an oil change super easy and nearly mess free. All done from the top, no crawling underneath or spilling oil which is inevitable when pulling the drain plug. couple of updates for a 2022 promaster... 1. Recommended oil has changed to 0-20 2. insertion depth for the suction hose is longer... not really an issue, you can just insert and fiddle with it until the pump runs dry. 3. Stubby ratchet helps but I was able to put a standard 3/8 inch driver on the 24mm socket and get a click or two per turn. the extra length helped in breaking it loose. a flexhead (craftsman 3/8 in flexhead long handle... my favorite tool) was also helpful. Again, thanks for a great how-to video

@stuartstuart866 4 месяца назад

I learned a trick a few years ago; because the dipstick and oil are both shiny, it’s difficult to determine oil level after an oil change. I sandblasted the end of my dip stick and it solved that issue, to a large extent. Thank you for taking the time to do this video, we have a ProMaster on order so after warranty, this will save me $$$$.

@FrugalFactor 4 месяца назад

Yes, sandblasting works, or even hand sanding. When you start your build all my videos are by category at ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AJGZh6iW5CE.html

@johnmerdler6526 5 месяцев назад

Thank you! Going to try this today because my oil pan drain plug is on way too tight to get off due to an oil change place tightening too much. Without jacking the van up, I cannot get enough leverage to get the plug loosened but I like this method better. The measurement is a nice detail, too.

@FrugalFactor 4 месяца назад

Yes, once you do it this way you will never go back to crawling under the van again. All the videos can be seen by category at thefrugalfactor.com/

@samchan6035 11 месяцев назад

Thanks for sharing the good idea for changing oil.

@FrugalFactor 11 месяцев назад

Thanks - It works really well. It has taken the stress out of changing the oil on the road. I can to it on a parking lot and no one realizes what I am doing. Since I don't need to go under the van!

@brucedianehall2086 5 месяцев назад

Excellent video. Thanks for posting.

@FrugalFactor 5 месяцев назад

Thank You - All the videos by category can be see at thefrugalfactor.com/

@logicalground 6 месяцев назад

thanks

@Bellasafari 2 месяца назад

I have all the ingredients, a bit timid to make a go at it… Do you recommend removing old filter, leave the cap off, suck old oil out, insert new filter and cap, THEN add the new oil? Your vid shows replacing old with new before extracting old oil… and then loosing the cap again.

@FrugalFactor 2 месяца назад

You can do it. For the RAM promaster I recommend this order 1. Remove the oil oil filter. 2. Pump out the old oil. 3. Put in the new oil 4. Put in a new oil filter. By removing the oil filter first and leaving it out, makes it easier for the pump to remove the old oil. After your done run then engine a few moments, the turn it off an check the oil level. That's it. Easy to do, and with the pump you never need to crawl under the van! It can easily be done while traveling in a parking lot.

@Bellasafari 2 месяца назад

@@FrugalFactor ok ! Thank you for the sequence ! I will be doing this while camping hence my hesitation incase something? Goes South!:)

@Bellasafari 4 месяца назад

Why didn’t you change the filter at the same time. I ‘heard’ it is better to change the filter more often as this will decrease the need to change the oil as frequently. I agree, change the oil 4-5K mi. Also your 28 and 3/4” mark, is that the tube length all the way up to the pump or to the top of the oil lid? Thank you~

@FrugalFactor 4 месяца назад

The tube length is up to the edge of the metal oil dipstick. The first time you do this - after you remove the oil go under and remove the oil drain bolt. If no oil comes out you know you have the correct length of tube. From then on no need to remove the drain plug when changing the oil. Also as you mention in your other comment - the oil filter change is shown in the Part 1 video.

@Bellasafari 4 месяца назад

@@FrugalFactor yes! Watched that video on the filter change. Lots of good advice there too!

@alexanderkasyanov4946 8 месяцев назад

Thank you for the video Good info I personally do use vacuum as well as it allows to drain 99% of oil. But be advised that most modern engines that designed to run on regular gas, in small amounts, do consume oil. Especially when they get older. For optimum performance Pentastar v6 engines take 5.9 quarts of oil, so my 2 cents to this video would be to put what’s required and not how much was taken out.

@FrugalFactor 8 месяцев назад

I always check the level of the oil with the dipstick. Its the transmission fluid that I carefully measure what is taken out, then put that amount back in. Then with the transmission get to operating temperature and check the level against the manufacturers level chart. Thank You for the comment. All the videos can be searched by category at thefrugalfactor.com/

@reallytho99 9 месяцев назад

Hose insertion/mark: 28.75" I drove a few hours before, but not right before pumping. Over 20 minutes to pump it all out. Near the end, you can slowly raise and lower the tube to check for remaining oil and get more flow. Way better than going to a shop! What year is your promaster, didn't see it on your site or in description. Do you think it is worth having a magnetic drain pan bolt? Thanks!

@FrugalFactor 9 месяцев назад

A magnetic drain pan bolt would not hurt. There is already a magnet in the drain pan - I would keep that one even if you added a magnetic drain bolt. I think Promasters from 2014 to 2022 are the same. Mine is a 2018. Thank for mentioning the typo I will fix that!

@logicalground 6 месяцев назад

What year is your van? thanks

@junkname9983 9 месяцев назад

can't get to the oil filter though.

@FrugalFactor 9 месяцев назад

Yes you can. The oil filter on the RAM Promaster is accessed through the hood. It is a cartridge filter. It is not under the van.

@craigsmithx 7 месяцев назад

Helpful! I've been meaning to get around t this for a while. & you provided a link to the pump too!

@FrugalFactor 7 месяцев назад

Once you have the materials this is easy and mess free to do! For reference the videos are divided by category at thefrugalfactor.com/

@JesusIsGod222 Месяц назад

This vans are pieces of crap . wait til you have problems with the Oil cooler that is under the plastic manifold . That's not going to be fun trust me .

@FrugalFactor Месяц назад

@@JesusIsGod222 no problems in more than 3 years thankfully. Like most things, as long as you treat them properly they will also treat you well!