Replacing a Ford 3000 Injection Pump 

You're doing it all wrong. You're suppose to have a case of beer and girls in bikinis while working. Thanks for the great video. I can now change my pump and have the tractor run right. You are a smart guy.

This was a great video but, you should have provided the torque spec for 20 - 25 ft. lbs. for the Injection pump to gear bolts and 10 - 23 ft. lbs. for the fuel pump mounting bolts for those of us that don't have that experienced touch.

I ready to start the same project on my 4600 Ford. Dealer told me the boogie man story’s and advised me not to proceed. Thanks to your video I see it isn’t such a big deal at all Thanks! Great video

GREAT video, very well explained and performed. Time for me do do my replacement now.

I have a 1982 -2000. You video told me something I did not know and saved me some trouble thanks

Thanks for this video I have two of those tractors they very very good

Thanks for the video Andy!!! Ya, most things aren't that hard, especially if you have a good book!! But then, now days we have American Tradesman on RU-vid!!!😎👍

I made it!!! Was busy catching up on this mornings videos.. yours popped up just a few minutes ago.. popular morning for videos!

Good job

Awesome video 👍👍👍

Hang on to the original cav pump so you can have it rebuild at a shop that uses oem parts, because that Amazon pump ( probably made in Romania) won't last anywhere close to as long as the original.

Just to let u know. you just resurrected my ford 3000 diesel! Had plenty people tell me the pump and labor cost more than the tractor is worth then right after asked me how much i want for it lol 😆trying to talk me outta my tractor. Im glad i found your video brother

Very nice dan people's power good

Hey great video. Me and my dad bought a 135 with a bad injection pump. Same CAV style. Was nervous but the video helps tremendously. Same process other than massey pump is on the left side. Also have a 4000 ford diesel so this video assures I can change a CAV pump lol thanks again for the good informational video

Great video with valuable info. I need to replace the injector pump on 3600 model. Where are some some web sources to purchase new or rebuilt injector pump? I have been searching without much luck. Thanks for showing me how to do this.

The battery plate swings out!? Thank you!!! Lol. Sometimes it's the little things.

we have a ford 3600 tractor and trying to change the glow plug. There is a welded bar at the top preventing enough access to the glow plug. and wondering if you know the best way to replace the glow plug? and thanks for this video as it was very helpful in replacing the injector pump! THANKS!!!

Hooking up the shut-off cable to this injection pump on the Ford

Thanks i will use this as help if sometime i need to replace the injecktor pump on my 1974 ford 3000 diesel

What were the symptoms of the bad injection pump?

Was it smoking are running bad? That you changed it out? Thanks for the video.

Can you just note we’re the gear is under the cover ? The pump looks to have a keyway it can only go on one way correct ?

When it starts doing this when you idle down it starts to idle lower. If you cut it off for a few minutes and fire it back up it will run good for a few more minutes..

I’ve got a ford 3000 73 model and when we first got it we went to bush hog some and it runs great for about 45 minutes to an hour or so without issue. Then all of a sudden when it gets warm the exhaust sound will change and you’ll start to see some white/grey smoke.. the fuel tank was rusted very bad so we changed the fuel tank and fuel filter etc ran it again with the same issue.. idk what it would be injection pump issue or injector issue or what.

Great job...will you pull the injectors next..

Hey Buddy,What size are the bolts heads that bolt the injectionn pump to the tractor? Thank You Very Much!

When you have your injection pump rebuilt (by a reputable fuel shop), you know exactly what you're getting. I do a lot of business with repair shops that have gone the Amazon rout for injection pumps. It's hit and miss. If I made my money as a tractor mechanic, I wouldn't put my reputation an aftermarket Amazon pump.

Great video..I would have liked to see you bleed the pump. Anyway I bought a 65 4500 backhoe with the same engine for a thousand dollars. It's in good shape still pretty tight because it sat half it's life. The guy i bought it from could not figure out what was wrong with the motor. I purchased all the manuals on the tractor i could find.. It had water in the oil and oil in the water. Took off the head and the gasket was total garbage. I took the head to the machine shop and had it redone and they shaved the head also. I brought up the fact that shaving the head too much might cause problems because it said so in the manual. They said they only took off 001 of an inch. I found a gasket set (there are about 3 or so different head gaskets) When the head was off i filled the block all the way to the top with water to see if any ran out the oil drain hole. nothing came out for a month long so i put the head on and torqued in down properly and had the same problems. during this time i was talking to every mechanic i could find and asking what the problem might be. most of the ford EXPERTS told me pinhole in the block. But the 65's were cast in the U.S.A. and not prone to bad castings like the 70's models.Now all my cylinders were filling with water. I took the head back to the machine shop and had it pressure tested, And i noticed the tips of the head bolts were a little flat " Oh no it can't be that" and again I said the book says you can't shave too much off the head without retapping the head holes.By the way the hole in the head stops at the threads so you have to drill it out also So i put some washers on the headbolts And the problem is fixed! No telling how many people messed with this tractor before I got my chance. Please pass it on.

What are the systems of a pump going bad?My1972 ford 3000 has a miss from half throttle to wide open any information is appreciated.

Don’t know if you give free advice but here we go… I have a ‘ 74ish Ford 3000 diesel that won’t start after sitting up 5-6 months. Got fuel to all 3 injectors but haven’t pulled them out. Should I pull them and see if they are clogged? Also could it be the regulator that is attached to the back of the instrument panel? Thanks for any suggestions. PS. Can’t find a “tractor” mechanic within 100 miles☹️

stupid question. was it running when you had the injectors cracked prior to it revving up? or were you running the starter? if so, how? I can't start it while I'm cracking the injectors over. Great video!!

Thanks for the video. I just followed it and replaced mine, however I'm not getting fuel to the injectors now. Not sure what's the problem? Thanks bud

If the triangular gasket is not installed will pump not pressurize? My

We broke one of the two bleeder bolts that hold down top . Uggh

I gotta do the same on my 4000. I’m sure it’s the same exact process. Where did you get your new pump from?

My Massey Ferguson 231 needs the pump resealed on it. It’s got a bad diesel leak. I’m too nervous about doing it myself. Looks like the tractor is fixing to be parked. Pissed at myself because of it.

What year is this 3000?

Hi, thanks for the clip! I did as you showed, I mounted the pump to the tractor (Ford 3610, year 1982), but the tractor does not move :( If I put some carburetor spray in the air filter, the tractor starts and everything is fine, that is, the pump works, but to start, the tractor fails to start. What did I do wrong?

im suprised that you didnt need to open the timing cover? I have a ford 2715e and need to remove my pump.. and i wonder if all the pumps are this easy to remove?

Andy sir i like this pamp and injector nozzle assembly with nozzle pipes for my ford 3600 Tractor, model 1985, So please help me. How I can purchase this in India. and what are the prices of that.

Similar to the masseys those older tractors will run forever and are easy to repair

Nice video where did you get your pump from?

Where is #1 cylinder is it in front or back my intake says 123 left to right so I didn't know if one starts in back or not.

Are you selling your old pump?

Do you just pull pump. No need to turn to tdc

What if engine gets turned over with pump off?

What was the reason you changed the pump? I have a 1978 555 Ford backhoe and it was missing all winter and when I reeved it up it straightened out and now it won’t start and I am not sure if it is the pump or the injectors would you be able to steer me in the right direction?

What the part number for that new pump having a hard time find one.

We have a 1970 Ford 4400 Diesel 3 cylinder and need to find an injection pump! Any help on finding a remanufactured or new or where to rebuild our existing one? We are in Northern California. Any help is appreciated :)

What oil does this pump take sir??

is there a gasket on that front cover?

How big of a job is it to rebuild the pump instead of replacing?

Mine misses on high rpm ?

Who's best pump rotary Or diafram

We installed a rebuilt fuel pump on the Ford340A but it’s not pumping fuel to the top injectors. It’s getting fuel to the pump from the fuel filter. What can be the problem?

Link to the pump you bought. Why not reseal the original one?

How did you know that it needed a new injection pump

I'm wanting to do this on my tractor, how good has the aftermarket pump held up? What brand should I buy

Sir please send me 1 link more.so i am price looking for new Engine from Ford 3000 Tractor.

Someone tried to replace the one I'm working on and got it out of time? How can I put it back in time? Thank you

We're is the best place to buy a pump

Andy sir please search in RU-vid (Ford 3600 1985) This is my ford tractor .

🤔

I need a prize plz