Replacing My Aussie Locker With A Spartan Locker in My 1999 Jeep Cherokee XJ Dana 30

Подписаться 7 тыс.

Просмотров 32 тыс.

50% 1

*Products I use and show in my videos can be found in my Amazon store link below.:
www.amazon.com/shop/idgaxj-si...
Individually linked items are further down in the description.
*Link to Amazon 30 Day Free Trial of Prime: amzn.to/2sGPQfO
If you like the videso and want to help support the content you can contribute below:
paypal.me/IDGAXJIntoTheUnknown
Venmo: vtnabuyer2@gmail.com
Contact me at vtnabuyer2@gmail.com
*Below are links to items that I actually use and recommend. Some have been tested. Others I use, but have not had to test yet:
"Theres More to Life Than Gas Mileage" - Sticker Decal:
amzn.to/353aQLK
EXTERIOR ITEMS:
Truck Lite Headlights/Lamps:
Single: amzn.to/2pmygwm
Pair: amzn.to/377d7qK
Auxbeam 12" Waterproof Lightbar - 7200lm:
amzn.to/2LDKtVb
Curt Roof Rack:
Rack: amzn.to/377bWrk
Extension: amzn.to/2qQb5uE
Smittybilt XRC Rear bumper with tire carrier and swing arm:
amzn.to/2XfNPlY
Smittybilt XRC front bumper (with winch mount):
amzn.to/32SqSqk
BFGoodrich Terrain T/A KO2 Tires - 33x12.50 R15:
amzn.to/357xJh7
RECOVERY ITEMS:
Smittybilt 9500 lb Winch
With SYNTHETIC Line (This is what I use): amzn.to/2rvN8JH
With STEEL Line: amzn.to/2phNR02
Swag Off Road Bottle Jack Axle Cradle
amzn.to/34n37qQ
LITEWAY Recovery Traction Tracks - 2 Pcs (Small snow/mud/sand tracks). Can be used for vehicle leveling too:
amzn.to/352Luxu
X-BULL Recovery Traction Tracks for Sand, Mud, Snow (I have not used these but carry them based on testing I saw on YT):
amzn.to/2qVyhrC
Go Treads:
gotreads.com/product-category...
Tire Repair Kit for large tires:
amzn.to/32IekS1
Viair Portable Air Compressor:
amzn.to/355DdsH
ELECTRONICS:
DJI Mavic AIR Drone:
amzn.to/2KnC1Zw
Garmin InReach Mini Sat Phone:
amzn.to/2KlNgBE
Rove Dash Cam:
amzn.to/2Kk7DiE
Samsung 128GB SD Card for Dash Cam and Drone:
amzn.to/379azc2
USB String Lights:
amzn.to/2sv9WcB
BESTEK 400W Car Power Inverter DC 12V to AC 110V with 4 USB Charging Ports:
amzn.to/2DIXOr6
Beatit 1200A Peak 16500mAh 12V Portable Car Lithium Jump Starter (Used this to jump my completely drained battery many times)
amzn.to/2OdAy9f
Beatit 800A Peak 18000mAh 12V Portable Car Jump Starter (I used these to power and charge my USB devices - fans,phones, lights ):
amzn.to/2q3JpTf
AC Infinity MULTIFAN, Quiet Dual USB Fan (I strung these together and used them to cool me down or to put in the windows for ventilation):
120mm version: amzn.to/2QeR3ES
80mm version: amzn.to/2qTJcBM
OBD Bluetooth Scan Tool - BlueDriver:
amzn.to/2NMaLGb
CAMPING ITEMS:
Ridge Outdoor Gear Adjustable Telescoping Tarp Tent Poles:
amzn.to/2QgevBs
Coleman Portable Bottletop Propane Camp Stove with Adjustable Burner:
amzn.to/35jImhi
48-Ounce Multi-Use Hand Sprayer:
amzn.to/2ObEKX5
Teton -25degree (f) XL Sleeping bag (Very Nice & Warm Sleeping bag):
amzn.to/2OfMkQH
K2 - 2 Person inflatable Kayak:
amzn.to/2QeJzBM
Mr. Heater Buddy 4,000-9,000-BTU Indoor-Safe Portable Propane Radiant Heater:
amzn.to/2Obhyse
Udap Bear Spray Safety Orange with Color Griz Guard Holster (Have not had to test it yet but I do carry these):
amzn.to/2COOSzH
Silky Saws PocketBoy Curve Professional Folding Saw (Great small saw):
amzn.to/2q3IuCh
Reflectix Insulation:
amzn.to/2PPwBsa
OTHER MISC. ITEMS I USE:
Compact Grease Gun for 3oz cartridges:
amzn.to/2O7wl7a
Plano 68qt Storage Box:
Without wheels: amzn.to/2DY3mxW
With wheels: amzn.to/2rl0Uz0
Ziplock Storage Boxes with Seal and Locking Lid:
amzn.to/36myTWj
"Jeep" Steering Wheel Cover:
amzn.to/2CFsAAu
*As an Amazon Associate I earn from qualifying purchases

Авто/Мото

Опубликовано:

22 июл 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 72

@anotherstateofmind_xjsteve9174 4 года назад

Glad to see you got it done!

@simpleoverlander 4 года назад

After 3 years of running my Aussie Locker it started to act up. It would sometimes not ratchet when I was in 2WD and making turns. This caused my front wheels to chirp and skip. In 4WD it would also bang a lot louder than normal when I would turn the front wheels (when it would give way under tension). The 4WD would still lock but it sounded different than it had up till that time. Upon inspection the stud/spring holes did seem to be ovaled (is that a word?) and I think there was too much play from wear. I would have put in another Aussie Locker, since this one did treat me well for 3 years, but decided to try something different. That is why I went with a Spartan.

@ThePredsmaniac 4 года назад

O-valed is surely a word in the shade tree lexicon! Along with O S..T!

@axleshouse7318 3 года назад

Do you think that adding manual hubs would give you less noise and more longevity out of the locker. Seems to make sense to me, but very few on line are talking about it.

@stevenharden803 3 года назад

How do you like the spartan locker?

@scoutdogfsr 3 года назад

The lack of lock out hubs really ups the duty cycle on front lockers as they not only track like the rear in low angle turns but increases with more steering angle. I experience the same in a k5 blazer. The front didn't make it two summers of Colorado wheeling but the rear is 12yrs old now with no issues. Nice vid and keep up the fine work!

@wyattoneable 4 года назад

I like your magnet idea to hold the caps. Now that your on the road I'm thinking this was a good choice to get this done. Great tutorial.

@keithlea6804 3 года назад

A good magnet stuck to each bearing will keep the shims a locker assembly pull tight to the carrier. Never was a fan of using grease. Glad to see you on the road again

@colt45d 3 года назад

i love the use of a framing hammer

@garretmonnet9397 2 года назад

Just did this yesterday in the rear. Wasn’t very fun to install, but worth the effort for sure.

@jeffcodog 3 года назад

Love the map..... it gives me a good idea how far you traveled..... may have to hit up when I decide to do this trail...... White Sands is amazing...... been there many times when traveling to Alamogordo

@philliphaessig 3 года назад

Never ever use a regular hammer on the center pin.It can put fractures in it and you won't know till out on the trail. Get a deadblow or brass hammer.

@_Srt-616 3 года назад

Great video! Did you end up having to use the shims on the spartan locker ?

@jeepinbanditrider 3 года назад

Is there a reason for not.going with Power Trax Lock Right (all the others are copies of this) or the quieter power trax no slip other than cost?

@saidsmailgmail9498 3 года назад

Job is done, everybody is happy.

@james6jewel 3 года назад

Is there a video for the axle removal or is it like most axle

@trevorwilson6609 3 года назад

Also, the Dana 30 comes with the caps marked from the factory. The letters stamped on the housing and cap in your case it'sthe letter H. Right side up on one side and 90 degrees on the other.

@kylemcgeever 3 года назад

Why did you replace the first locker? I missed it

@garysmith643 3 года назад

Great question ! I was wondering the same

@NCMTNBOY Год назад

It is in the bottom of his description. The aussie locker started to pop loudly. He determined it was wear on the 4 pins making the holes oval shaped. He really liked the Aussie, but thought he would try something different.

@ejokine1 Год назад

Try something different? The spartan is a copy of the Aussie Locker 😀

@rb30athorn 5 месяцев назад

AKA Detroit locker?

@Austin-ry2gs 3 года назад

What fender flares do you have

@danhambrick6331 4 года назад

Nice job.Is that a factory 3.55 ring and pinion and do you have a locker in the rear?

@simpleoverlander 4 года назад

They are factory gears and don’t plan on changing them any time soon. They work for my purpose. I won’t put a lunchbox locker in the rear but would add a selectable locker if I ever decided to spend that kind of money on one, but would need to put in a different axle. I won’t lock my D35. Would be nice to have all 4 wheels lock but don’t trust the rear to be locked all the time, with any axle.

@markchatman9583 6 месяцев назад

Your caps are already marked from factory. There’s a vertical H and a horizontal H on the diff on each side. There’s the same markings as the caps.

@StephenAGravattEsqMiddletown 2 года назад

Does Spartan make one of these for a 2005 Nissan Pathfinder LE? I cannot find one online. How is this unit different from the LOKKA front diff locker. I did find one of tnhose online but there seems to be a potential problem with that company's customer service. Can you point me in the right direction please? Thank you.

@tbcarleton Год назад

With those springs on the inside, how would you even take it back apart?

@rsbrehm Год назад

Did it last? A friend of mine said they shattered around 3 Spartan lockers over the years. How is the durability for you?

@unclequack5445 2 года назад

Did it wear out or did you just swap it out?

@Olive-oilien 5 месяцев назад

How’s the spartan treating you now? Were you pretty hard on the Aussie locker? What size tires were you running?

@ejokine1 Год назад

You said in the video that you would explain in the comments why you swapped out the Aussie Locker, but I don't see that info. If you had an issue with the Aussie, did you contact the manufacturer, TORQ-MASTERS Industries?

@stevefellers9349 2 года назад

So did you sell the Aussie locker?

@buildingusa9604 3 года назад

You sound like Matt from Bleeping Jeep

@SL-hp8ou 4 года назад

I re-geared my Toyota myself a few years ago. Toyota uses threaded adjusters on the side bearing races to set the backlash. I’ve also seen others struggle with Dana 60’s side bearing shims. Just wondering if XJ’s Dana 30s needed side bearing shimming or not? Love your video, keep up the great work!

@simpleoverlander 4 года назад

Thanks! I can’t remember if I needed to remove side shims when I put in the first locker. Maybe someone else can comment if they know.

@SL-hp8ou 4 года назад

If I understand it correctly, the backlash, together with the pinion depth, is a measure of how tightly coupled were the ring gear and the pinion gear by setting the ring gear closer to or farther away from the pinion gear; too tight will result in too much heat and excessive wear; too loose will result in lost of strength and breaking of gear tooth. Given that you ran those gears for thousands of miles without a problem, plus the fact that it is in the front axle, I think you are good. Have a nice trip. Looking forward to your new videos.

@nathanbumgarner2318 2 года назад

@@simpleoverlander In my dana 30 the shims were under the carrier bearings. Not going to see them unless you changes those.

@trevorwilson6609 3 года назад

It's a lot easier to install if one pulls the wire pins prior to putting in the crosspin...

@robertb880 Год назад

Does anybody make a video for a rear Dana 44 Spartan locker jku?? I can't find any.. Help?

@mikecarr1484 Год назад

Why does everyone waste the time removing the ring gear. It is not necessary or the carrier. Just do it inside.

@dansharp8042 7 месяцев назад

Mine has a bolt in it ???? Do I have a carrier that shouldn't be in my housing ?????

@axleshouse7318 3 года назад

Do you think that adding manual hubs would give you less noise and more longevity out of the locker. Seems to make sense to me, but very few on line are talking about it.

@KJsProjects 3 года назад

That would make sense in a front diff because when you unlock the hubs, the diff and driveshaft shouldn't rotate.

@wayneC7 2 года назад

Are the diffs the same for a 2000TJ? Thinking about doing something this

@brbadventurer Год назад

A 2000 TJ should have a DANA 30 in the front, but it could have been changed by someone before you bought it. As noted in the above comment by Trust Me this style of locker is not recommended for the front. There seems to be confusion with in the 4x4 community that these lunch box lockers only lock when you have no traction on one wheel, the fact of the matter is they are locked all the time but if you are on pavement they will slip to prevent tire scrubbing those plates ratchet over each other to let the locker slip. Save your money and get an e-locker or an air locker for the front.

@alexeimagher9083 3 года назад

Looks pretty similar to AUSSIEs. What was the reason to replace AUSSIES with SPARTANS? Have an idea to replace my stock D30 gears with AUSSIE. But unsure whether I can drive jeep on highways afterwards. If you could help with this information I would be really happy.

@simpleoverlander 3 года назад

The Aussie Locker had worn out over time it appeared and was not functioning as it should. I had it for about 3 years. I would have bought another but decided to try Spartan. The Spartan seems to be more quiet on turns when not engaged in 4x4. You also don’t need shims for the Spartan. I think both have done well so would use either again. My Jeep is often a daily driver and am on the highway often. No issues at all with a locker like this. I would not put it in the rear though since then it is locked all the time. By having it in the front it is only locked when engaged in 4x4

@alexeimagher9083 3 года назад

@@simpleoverlander Thanks alot for responding. The most important was the info about the rear axle. Thanks. My main mileage is Hwy mileage. Anyway, more info I read about Spartans, more I like it.

@jeffshorts6052 3 года назад

I want to put one in my xj should I do front or rear. And reason why. I’m thinking rear because of growing up old school as in posi rear

@simpleoverlander 3 года назад

If it is a selectable then I would go rear. I personally won’t put a lunchbox locker on the rear and be locked all the time. Everyone has their thoughts on that, but I don’t want to be locked while driving hi-way speeds in rain, snow or ice. That is why my locker is in the front. It is only locked when I engage 4x4. I don’t need to be locked any other time really.

@jeffshorts6052 3 года назад

Ok thanks a bunch I wasn’t really sure how all that worked. I guess I was thinking it would be like a positive traction in the rear. I have a 2wd pickup with a posi rear end that works great on roads for winter driving. Thanks for the clarification on that.

@ninjascout468 3 года назад

I'm putting one in my rear 1st daily driver and weekend trail rig posi rear doesn't hurt nothing and you will be very happy on the trail , you just have to learn how to drive with posi rear end , as my 93 xj won't break loose on road unless I want to give it all she's got captain ..lol

@StephenAGravattEsqMiddletown 2 года назад

P.S. I meant for the front diff.. I have an OX for the rear.

@40Spec Год назад

I saw in the comments you said you put the locker in the front only and that by doing so the locker will only engage when the Jeep is in 4x4. Can you please explain how it only engages when in 4x4? I thought Jeeps’ front ends spine regardless of it being in 4x4? Or does the locker not engage because no power is getting to the locker in the front when 4x4 is disengaged?

@simpleoverlander Год назад

When in 4x2 the main gear in the housing is not engaged, so there is no torque on the axles. There are components that still spin, but they are not fully connected. When you go into 4x4, then it does engage and provides the torque for the front axles. Probably not the best explanation and someone else could answer it better, but that is the gist of it.

@rnr5445 3 года назад

Is the spartan locker the best choice for the front locker? I have Lokka’s in front and rear in my 85 4runner it works fabulous in the rear. But no so in the front. Not only does it turn into a tank. its hard on everything else in the front end. So anybody’s have a better choice let me know. Electric’s is my last option because of the $$$ it cost.

@Agent.K. 3 года назад

Air is the best I think but $$$$$

@brentfellers9632 2 года назад

Put manual hubs on, problem solved.

@CavemanOutdoorsMissouri 4 года назад

I was going to do this to my 09 jk but since I traded it for a Rubicon I no longer need too. Have fun on your trip.

@simpleoverlander 4 года назад

That Rubicam looks good. You should have a lot of fun going places in that 👍

@trustme7731 2 года назад

I suspect your Aussie had a problem because you installed it on the front and it has no manual hubs. I think their instructions say not to do this. The thing is constantly working and working overtime being on a steer axle. I would say either install manual hubs or get a locker you can turn on and off. You didn't mention how many miles you put on the Aussie or what oil you used.

@mikecarr1484 Год назад

Not if you can run 2wd .. think before you speak .

@trustme7731 Год назад

@@mikecarr1484 His Jeep doesn't have selectable hubs which means the front axles are always turning, similar to the full time 4wd of the '70's and '80's. He didn't say, but the specs say it's a all wheel drive which means it's always driving the front axles. There is no 2wd. So obviously the locker is always working as shown by his driving it afterwards. You could hear the clicking. To me, it is not a good idea to have lunchbox lockers on the road which is why I've decided against them for my truck. So you see, I did think before speaking and you didn't.

@fudgewaterson895 10 месяцев назад

@@trustme7731 it looks like he installed them on the front of an xj, which only comes in part time 4wd. they did not make a full time 4wd xj. on the road, in 2wd, only the rear axle is powered. therefore, the locker is always able to unlock and ratchet in the front (lunchbox lockers only lock up under torque from the engine, but there is none in the front when he’s in 2wd). therefore, it makes no difference wether or not he has locking hubs because there is no way for the front locker to get locked.

@MrTurbo64 3 года назад

There's a H stamped in upright and sideways position on the housing and the bearing caps to orient them.. look closely.

@DirtRoadTherapy Год назад

Replace the Aussie with an inferior copy, why? If the Aussie was worn out, this fixed it every bit as much as a replacement Aussie would have 🤷🏽‍♂️

@Oldcoinsandstuff1 3 года назад

This type of locker should not be used as a daily driver, in my opinion.

@chadharrison5681 3 года назад

Can you provide a reason.

@Oldcoinsandstuff1 3 года назад

It’s rough in corners and if you don’t accelerate out of every corner just right it will try to lock up and it WILL eventually brake the “ cups” that fit over the axle ends sending metal throughout your diff.

@frankdehne1949 3 года назад

@@Oldcoinsandstuff1 he's putting it in the front all it does is ratchet and two wheel drive. and if you have lockout hubs then it doesn't do anything at all to you lock the hubs and pull the lever

@ejokine1 Год назад

You apparently don't have enough experience with this type of Locker. When they are installed properly and the differential is in good condition they work fantastic.