Restoration Of Use Old Tyre || Restore Old tyre Making New | 

These tires make you closer to God

Got to admit he is very good at his job. I would rather not use these but I admire his skills.

Ну для тачки чо-то возить или для детского квадрика пойдёт... а вот на авто я бы не поставил... я бы даже качать до 2.2 не рискнул!!! Да и проколы будут всё время! А вот посмотреть прикольно!

Правильно. Аналогично, когда на пятке протрется носок, надо его не выбрасывать, а покрасить пятку в чёрный цвет 🙈

You do understand this is incredibly dangerous. Your not "restoring" anything, your weakening the rubber which I'm guessing the lucky owner will find out about as soon as they hit about 50mph and their tires all explode. EDIT: Guys I'm not picking on anyone or trying to belittle people dealing with poverty but this is criminal. I worked at America's tire co and have had LOTS of experience racing and rock crawling and have gone through hundreds of tires myself. There's isn't a single tire company that states removing tread BELOW the wear line is safe. You create weak points that pressure and heat will exploit. And these guys aren't selling these tires as used they're selling them as new tires! That's a dirty trick! If one of you can give me an example of ONE company that states this is ok for highway use and safe without voiding the warranty I'll give you a set of 35" toyos off my bronco!

Навыки этих людей уникальны! Но говорить хоть о какой то безопасности при использовании этих шин было бы глупо!

I can’t even begin to describe how unbelievably dangerous running those “sure pops” are.

а потом на авито: "резина - еще на пару сезонов хватит"...)))

Вот оно как. А я дурак клумбы под цветы из них делаю, а можно еще на пару сезонов восстановить 😂

This is not restoration These idiots are simply making arrangement for some big accident

Bridgestone India🤣

As a tire shop owner that’s scary I don’t even like doing that to my commercial tires. I saw those wires he went too deep 😳

Таким образом борятся с перенаселением ,и уменьшением выбросов выхлопных газов Это гениально!

А ещё пупырышки надо приклеить и ваще новьё будет!!!

Таких надо на автоваз может и машины станут чуточку лучше 👍

Глазомер работает на все 100%

естественный отбор по-пакистански ))

Was very common with truck tyres, but only after carefully measuring the tyre. We had an electric grooving knife, and not all tyres were suitable for regrooving. Michelin actually has a manual for this procedure...

Все пля, как новая! Муха не сидела))))

When you go to discount tire and say “just give me the cheapest one you got”

While the added threads is good for a little extra tire life, the thickness of the tire wall has decreased below what the engineers determined is the safe operating limit for the tire. What I don't quite agree with is, it seems as though the tire is repackaged and sold as new. This is not good for the consumer.

Этого категорически нельзя делать.

Talented Pakistani labor for sale at a very cheap price. It's very sad to see how well trained and talented Pakistani skilled workers don't get paid their hard work. From Canada 🇨🇦.

estos hombres hacen mucho con nada .... mis respetos a estos excelentes trabajadores y que dios me los cuide mucho .... saludos

Для тачки запряженной осликом подойдет)))

Демонстрация изготовления опасной шины. Потом будет как в том приколе "родился и умер от дырки в резине".

Я удивояюсь этим парням и этой работе,с голыми пятками и простым инструментом делают такие вещи!!!👍👍✋

They're then re-packaged as 'Badyear , Dunflop and sold back to us.....classic

Great video thanks! Dangerous tires, top speed 50 km/h ;-) Greetings from Germany (German: Tolles Video Danke! Gefährliche Reifen, Höchstgeschwindikeit 50 km/h ;-) Grüße aus Germany)

These are definitely not recap tires which are dangerous enough, but re-treaded old tires, not good. In county like their's where money is scarce, this becomes an option. Thanks for sharing this story. 👎🤒☹🇨🇱🇺🇸

Very good craftsmen! The middle easterns wether they are Pakistani, or indians or Iraqi , Irani, they are very good craftsmen. I saw a lot of videos on RU-vid how they produce things, repair, refurbished almost always with minimum tools. A lot of these people are very good. Respect to them

Nice skill and make people straight to meet god

Поражаюсь точности, ловкости.. Все на глаз. Вот где профи!!!!

Wow...cutting grooves into a maypop, and cleaning and wrapping it up like a new tire. They're definitely skilled in doing so.

This isn't restoration. Rather, this should be a crime because they then sell the tires as new tires to African countries.

admirable gente supertalentosa su Dios los Bendiga... saludos dsd venezuela

На бумажке это он гарантийный талон выписал????)))) не дай так жить конечно, не от хорошей жизни все это

He is giving someone a death sentence.

And that’s why it’s high time such skills were put to better use!!!

Наклейку наклеили что это первая нарезка протектора и ещё можно 2 раза нарезать 😂

Regardless of the skills and 'creativeness' in this technique, it is still a very dangerous act. Deepening old tread pattern, will ONLY WEAKEN the structure of the tire carcass.

Было бы интересно устроить таким шинам тест наряду с такими же новыми)

Bien chingona quedó la llanta. Lista para ir a dar la vuelta al mundo.

Straight to Heaven !😇

Единственное полезное действие - помыть. Чисто как дань уважения бедной покрышке за годы службы. Помыть и сжечь. Лучше с мастерской вместе.

I suppose a transmission rebuild involves saw dust, a funnel and 10 minutes! 😂

Ни чего даром не пропадает , проедет еще долго а в конец на обувь пойдет !!

You could probably invent a tool to cut the three vertical grooves around the tire at once, maybe even attach it to some kind of spinning took to speed it up even more.

As someone who has seen these tyres and how unbelievably loaded those vehicles get, I bear witness that this is a suicide lottery. You will get it one way or the other, but you will get it.

1:53 до корда дорезал, видимо уже один раз эту шину "реставрировали"😂 пора ребятам учится "варить" новый протектор😜

Safety is not for clever people. MAke this on all tyres in the world to save carbon and petrol. Very good job jo

Valeu amigo pelo ensinamentos.Brasil 22

Технический слой изношен,вы бы ещё маркером рисовки рисовали)

Being an international traveler, and having seen how different various economies are I understand it. Look at things from a greater perspective. New tires are expensive and hard to come by in some of these places. If the shoe was on the other foot, you would be right there trying to get tires just to get by. Not every country or individual is wealthy or has access to the standards of living us westerners are use to.

this tyres helps to reach heaven🤣🤣🤣🤣🤣

That's one way of decreasing the population!

This looks like a very tyre-ing job! I mean, I totally understand why these guys are doing this but fuck me, there is restored and then there is even more dangerous than when the tyre had its last rotation. If you have a beam of wood.. you can place 1 tonne max load, then it snaps.. it gets a bit old looking, you cut one 1/4 off top and bottom which equals one 1/2 .. this means it's only 50% of what you had doesn't mean it's restored.. it means it's only half as strong as it was. So, if these shiny (way below minimum depth) are then carved to (restoration) look like new. The integrity strength is about 80% gone. So will be the life of the person who drives their family around in the death trap vehicle.

Называется ролик : Цех по производству шин убийц или шины камикадзе... 😂😂😂

Well i never will use a tire like these... but there is a nicelly work... the tire designe was perfeclty...

Thousand times better. Good hustle. This is where Walmart gets there tires from.

Have a safe trip🤩

EN EL MINUTO 02:06 CREO SE LE VE EL ALAMBRE QUE VA POR DENTRO , QUE REVIVIR CUBIERTAS ESO ES SER KAMIKAZE QUE TE REVIENTE A 120 Y LA TENGAS ADELANTE BIEN QUE TE VA A IR JAJA, ABRAZO DESDE EL FIN DEL MUNDO ARGENTINA 🇦🇷🇦🇷🇦🇷

BEST TYRE IN THE WORLD! PERFECT WAY TO FLY

Didn't think you could do this with regular vehicle tires as they're already really thin walled to begin with. I know for the bigger trucks/tractors offroad machines some tires you actually can because they're made for it but no way id ever drive on these...

Молодцы рукастый народ , все делают !!!!👍👏Опа ! А у нас ещё протектор 30% ,и возраст шине лет 10 и типа негодная ,ой ой нельзя ! Можно оказывается просто рисунок углубить и ездить ещё лет 7 ;)))черный юмор !

Думаю эти резины отправляются в страны СНГ, и продаются как б/у

this restoration make tyre blow at 50 mph and send you straight to God

Radial tires were never designed to be regroovable. Evidently you didn't get the memo.

This is the best way to have blown tires and accidents....RIP BRO

The most basic safety of driving a car is to have proper tires. This repair made the worn-out tires weaker and will have safety issues.

There's no denying that what this guy has done is a work of re-groving art but the safety of the practice is something to be desired.

Lo chacha ... "Bana diya Maut ka saaman "😮😮😮

El medio ambiente y los servicios de sepelios se lo agradecen

Si hacen eso con los neumáticos, no me imagino recicle con LOS PRESEVATIVOS USADOS !!! Una lavadora y empaque nuevo y listo 😂👍🏻🇦🇷

The tyres they craft are the tyres that wish you a Happy journey to HEAVEN

thanks for the making it new again, but I rather give the money for what you doing, I buy brandnew tires else where.

1:52 OMG, the steel belts is out of the rubber. You can see it in the middle cut. If the steel belts layer gets water, it is going to rust, the strings is going to tear, and the tyre explodes. :O

manufacturer: change the tires when the grooves disappear. him: "hey, I know how to cheat the system"

God is watching you my friend....

Might be safer to drive on it slick. Don't put any air in that thing if you value having a face. Bet this guys good at his job, knows how to cut within 0.5mm of the belts.

This is extremely dangerous and could cause lives!! I hope these people understand what they are doing and such activities should be banned immediately

На такой резине опасно ездить не зря заводом рассчитано. Влюбой момент может рвануть.и ты вкувете.

Very impressive to do that much detail by hand

Разрыв колеса !

Imagine if dunlop ceo found that their name are used in used rethreading tires🤣😂

Thats really nice he just exposing them by saying that they gonna be viral Thanks channel

Very dangerous but damn he did that nice

This can't be right, the integrity and load rating on that tire is heavily compromised

Я только что смотрел как ихние соседи литые диски восстанавливали.

Двойной ресурс. Ручная работа 😁👍

"The latest Computer simulated tread pattern to remove the most water from the road surface"...In all honesty unless the tyre is built to allow this...Yikes. RUN. The material thickness between air and the steel bands must be minuscule. At operating pressure (2.2bar, 34psi) hit a pothole and bang.

Где то был ролик с восстановлением дисков. Эти шины как раз созданы для них!

I have a tire with 2 months of use at the target price, take it easy, you did a good deal.

Making thinner And thinner tyres 200km rides tyre💥 boom game over

Утилизировать старые шины слишком дорого, вот и нарезают новый протектор чтобы продать кому-нибудь.

Nunca pondría unos neumáticos como esos a mi auto expondría mi vida y la de mi familia esto es delicado

افضل اشتري اطار جديد حتى لوكان ماركت صيني ولا اشتري اطار مستخدم لو كان ماركتة معروفة في سوق .. انتبة لي حياتك وحيات اللي تحبهم

I m doing my tires this way now,say goodbye to tireshops 😢😊

La banda de rodamiento queda demasiada débil ,y causa accidentes...no es recomendable.

И так у них по закону можно много раз, только изнутри сырую резину подклеивать (лайфхак), утолщать рабочую стенку, колесо конечно будет уменьшаться в диаметре, зато хватит на несколько поколений, пока не сотрется до диска😆