Rust Removal - Top 5 Tips & Tricks for Removing Rust With Evapo-Rust

Подписаться 27 тыс.

Просмотров 63 тыс.

50% 1

Click for more: dsportmag.com/social/
Buy Evaporust on Amazon: amzn.to/3rRehAF
We tested some home-made remedies along with rust removing products aimed at automotive enthusiasts a while back, and one of the products that had great results is "Evapo-Rust" (Evapo-rust.com)
dsportmag.com/the-tech/surfac...
We wanted to take it a step further and see if we can make it remove rust even better and quicker, so we tested a few methods and came up with a few tips and tricks anyone who uses Evapo-Rust or have rust issues can utilize.
Here are the Top 5 Tips and Tricks when using Evapo-Rust
0:52 Tip 1: Bring On The Heat
1:15 Tip 2: Turn Up The Sound
3:57 Tip 3: Rustblock
5:31 Tip 4: Time To Gel
6:29 Tip 5: Don't Frown If It's Brown
We want to hear from you.
What do you want to see next?
Comment below or on social media
dsport
dsportmagazine
dsport

Авто/Мото

Опубликовано:

15 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 90

@Sandman2879 Год назад

Pour it through coffee or paint filters to get the crud out of it after you use it. It'll last longer and won't have all that in it. You'll be surprised how much stuff piles up in the filter. Go slow because it'll clog the filter and come through slow.

@davidfuller764 Год назад

Thanks, that makes good sense to get the crud out. otherwise evaporust will continue breaking down the big chunks of crud, maybe?

@balisticsquirel 2 года назад

Amongst so many junk videos out there, it's refreshing to find good solid knowledge like this. Thank you.

@davidjennings8758 2 года назад

Realy great analysis. Nobody else mentioned the gel. The gel is exactily what I need for my project. Thank you so very much.

@JohnMiller-oz7gv 2 года назад

This is the best video I seen on this product. Nice work.

@sglenn6 2 года назад

Outstanding Video! Need to use this on my BMX bikes. Thanks for this professional video.

@readchp 2 года назад

Really well done. Thank you.

@KingGJT 3 года назад

Super nice video! I just ordered it and your tips really help! Thnx for sharing :)

@olaf3613 2 месяца назад

Thanks for the heads up on the paper towels and plastic wrap! I have a old motor cycle with a lot of rusty chrome. This trick should work great! Thanks again, keep up the good work

@league6767 2 года назад

Very informative video! Thank you so much!!

@curtpratt2203 Год назад

Thanks for an informed comparison of ways to use Vapo Rust

@charlesgillette2925 Год назад

Excellent review.

@rubennavegante3491 2 года назад

Thanks for the video

@ashleyharvey14 4 года назад

Great video!

@dsport 4 года назад

Thank you.

@jt9498 Год назад

I'm a big fan of Evapo-Rust. Use it all the time, even though it's pretty expensive up here in Canada. $100 for a 5 gal. pail! I buy it by the 4 L jug ($35).

@james66872 Год назад

Good looking out

@stevegreen1711 3 месяца назад

Great video.

@SpentzosDino 2 года назад

Thankyou for this video. I had good luck using vinegar in an old crockpot but it took awhile. I will now be replacing the vinegar with Evapo-Rust, Thanks.

@reallyoldsubdude387 5 месяцев назад

Now that is a good idea for an old crockpot!!

@fflife6730 3 месяца назад

Pour Evaporust through a coffee filter after use to remove excess sediments. Always always always expect to brush item with a wire brush or wheel after treatment.

@bobclark9080 Месяц назад

DSPORT, Have you tried spraying it onto a rusty body panel or inside a frame rail by using a sump pump, garden hose, kiddie pool, and spray nozzle? Heating it could be done with a engine block heater pump from Tractor Supply that heats it up to 135 degrees. That's how they restored the 1957 Plymouth time capsule from Tulsa Oklahoma, but I don't think Ultra One Rust Remover company used a heat pad or engine block heater to heat it up.

@R2_D3 2 года назад

@6:10 Better to use some old sheets or dishtowel instead of paper towels, it is sturdier and ''traps'' the rust and dirt better. (used that trick a lot with cleaning vinegar, I'd just put it in an old plant sprayer and keep it moist, works like a charm! Or if it's not too big, wrap it with cling film)

@xianzhang5089 Год назад

Great video!!....the evapo rust gel was the tiip that will really help me!!😂

@tautahihati5476 Год назад

Chur mean bro like it... best demo

@rickswanberg4995 Год назад

You could use Ophospho as a second treatment to convert the rust to an inert surface following the Evapo-Rust.

@TheCuriousOrbs 3 года назад

Wow, heat definitely looks like the way to go. Maybe using a small vented lid so it doesn't build up pressure, but does slow evaporation.

@jasonboudreaux5003 2 года назад

I was wondering if the pressure would Help

@davidfuller764 Год назад

“Use distilled water to replace evaporation“ if I heard correctly at end of video.

@EricPement 2 года назад

What do you recommend to put on hand tools after using Evapo-Rust, or other objects that will not be painted?

@joedoe4642 3 года назад

Great video, very informative. Learned something new

@eukaliptal 3 года назад

great video, thanks for sharing Have you tried using a filter to clean the used solution? Don't frown when it goes brown do filter before you dismiss-to?? I'm a maker, not a rapper... give me a break lol

@minirallygt4071 9 месяцев назад

thats impressive what do you recommend for cleaning alloy like carbs in a ultra sonic cleaner?

@GusMahn 2 года назад

Good video. Any thoughts on using a pump, a spray nozzle, and a plastic sheet to de-rust the bottom of a car?

@ct71rr20 Год назад

I did it with Rust911, except I used a plastic bin, sump pump and sprinkler head. Tented the whole thing in plastic and let it run for about 16 hours. Worked great!

@bryancunningham1095 8 месяцев назад

I was wondering if you use heat to speed up the reaction does this reduce its rust removal capacity which is around 1/2 pound of rust per gallon, also does this effect the shelf life or cause it to have shorter useful life, or cause it to polymerize quicker indicating the end of its usefulness.

@jevansingh3706 3 года назад

Firstly, great video! if you use the evapo-rust gel and decide to keep it on the metal for a day or two would I need to wrap/ cover the item? would you say the gel works more effective than the liquid form ?

@404SRT 2 года назад

Could you use this for electrolysis ?

@tonyversus9787 Год назад

Stupid question, would evaporust be a good product for a parts washer tub? Hard clean the parts in my slop sink then transport to the parts cleaner to let them soak and final scrub off the existing rust? I have the 20g harbor freight parts washer

@jludtxs 3 года назад

does the gel come in any size bigger than 8oz? doesn't seem like that would go very far

@richgendron9999 3 года назад

Can I use it on my car as a iron remover

@bryonbaker5349 2 года назад

I have a blazer 4.3 that I borrowed to somebody and they wrecked a few things and didnt replace them. I almost died and the state is currently working on getting me disability so money is an issue. The vehicle has some rust in the cylinders now and I was wondering if I could poor this in the cylinders and rinse them out and spray wd 40 or oil in there and crank it over. Or maybe vinegar but I heard it will destroy the aluminum pistons. This is my only vehicle as I my other vehicle I borrowed to someone and they put a whole in the oil pan and kept driving it until they blew the motor up and also didn't give me any money for doing it. Any help on this would be greatly appreciated as I'm in a bit of a tight spot because of all of this. Thanks

@justinnorton4308 5 месяцев назад

Also looks like the room temp fluid got dirty faster than the one that was heated!

@trevoradams8675 6 месяцев назад

I found that evaporust which works great will darken high carbon steels.

@Mekchanoid 3 года назад

Really useful video. Could you recommend a degreaser to use before Evapo-Rust?

@billygoatracer 2 года назад

I like simple green cleaner, it's safe and works good

@Mekchanoid 2 года назад

@@billygoatracerThanks for the answer. I used a kerosene-heavy degreaser before and it stank out my workspace!

@VincentComet 4 месяца назад

Can you use rust block inside a motorcycle petrol tank

@odu2k Год назад

A+++ 🍺🍺

@dgmenace73 2 года назад

Question: can this be used in cylinders to break rusted rings? If so, what do you recommend to mix this with to prevent it from slipping on by too fast in the cylinder? Thanks for the video! I have tried this and it works great on tools!

@jackmacdonald4867 6 месяцев назад

What can be done if you are not able to soak the part

@elizabethhenderson3747 Год назад

Why is there no link for Rust-Block Spray of which you are promoting??

@rosshemming1347 2 года назад

How about tow chains

@johnhall8455 22 дня назад

The problem I have found with it is that it leaves a black coating, which is easily removed with a wire brush, but that kind of defeats the object… Has anyone found a way of removing the coating without brushing?

@rgruenhaus Год назад

I have the gel so I can't heat it and putting it on the front of my fridge certainly can't be done anything like what you talk about here!

@bobwhelk2117 2 года назад

Wondering if heating evaporust puts off dangerous fumes?

@davidfuller764 Год назад

Good Question. Curious

@David-hm9ic 10 месяцев назад

There's nothing toxic in Evapo-Rust.

@bobwhelk2117 10 месяцев назад

@@David-hm9ic so you must put it in your smoothies?

@4dirt2racer0 2 года назад

"box stock"?? thats square tube brother :p

@John-gm8ty 2 года назад

a little hard with big parts heh

@AerialLensVideo 2 года назад

Thanks for the video - but I cannot find the Rust-Block product you show here. Is there a paintable alternative inexpensive spray? By that, I mean is there a quick spray coating to prevent flash rust (after using water to clean off the evapo-rust and then drying of course) that can be painted when dry?

@dalelarson7005 Год назад

You might try using Penetrol to prevent the flash rust. I used it on an antique blacksmith vise I restored and it worked great to prevent rust. And supposedly you can paint right over the cured Penetrol.

@-Gunnarsson- 3 года назад

I hate that all products seems need to be rinsed with water. Thats flashrust always.

@davidfuller764 Год назад

Dang! Good point

@reallyoldsubdude387 5 месяцев назад

He said to get off your ass and use something to stop that, say . . . Rust Block for example . . . from happening. That means that you need to use the 7 Ps before you start. Oh darn, that means that you would have to use your brain and think ahead.

@UKcomedyfan28 3 года назад

For the half an hour heated test: how could it look "better than when it was new" if it shouldn't have had any rust when it is new?

@zappolo85 4 года назад

Its 140 °C or °F?

@JML1987 3 года назад

It's boiling point is close to water, so 140 F or ~60 C.

@bradleypease2492 Год назад

@@JML1987 that’s no where near boiling Temp

@David-hm9ic 10 месяцев назад

@@bradleypease2492 JML1987 is saying that the boiling point of Evapo-Rust is close to the boiling point of water; i.e. 212° F. The 140° reference is definitely Fahrenheit.

@bradleypease2492 10 месяцев назад

@@David-hm9ic Even if he is saying that you just proved his temp was no where near to the boiling temp of water - what’s ur point

@4dirt2racer0 2 года назад

thats cool its so inert with most things, shit my municipality would probably love for me to pour my drums down the drain n get rid of a little rust this shit really is amazing i cant believe its not twice the price it is.. i could see california requiring u to hire some cleanup company to come out n dispose of it, if ur even allowed to have it there.. they make it seem like such a pretentious egotistical place

@paulbillings1791 2 года назад

In the state of Cancer,Evapo-rust is known to cause California.

@dandare1001 2 месяца назад

Don't frown if it's brown! That's what I kept telling my girlfriend.

@rgruenhaus Год назад

Little to nothing with your coverage of the gel!

@rajanjhaveri3995 Год назад

Please use gloves while handling chemicals and materials heated or dipped in any chemicals.

@v52gc 3 года назад

Got to the gel bit, “Tip 4”, wait, what, I got the tip to heat it up, but not much else... gel isn’t a tip, it’s basically saying to use another product...

@MrSprocket2u 3 года назад

yeah ...lol , looks at your rust parts ..... parts rust a different rates ... as metal compounds are not all the same

@greggminkoff6733 7 месяцев назад

There is no such thing as box stock. It is called square tubing. Nobody wants to quicken the time. I'm sure what you mean is to lessen the time or reduce the time. If you can't speak correctly you have no business making a video using the English language to explain what you are doing. Take the time to think about what you're saying. Make up cue cards and read off of them when making a video. That's what people on television and formal speakers do.

@reallyoldsubdude387 5 месяцев назад

Sure, everyone in the country uses the same vernacular as everyone else don't they? Ya trolling pervert.

@lorrainewilliams7896 3 года назад

1:46 calling your audience "guys" is lazy and disrespectful to women. Not a good way to get new subscribers.

@paulbillings1791 2 года назад

Pretty common for women to address a mixed group of people as,Guys. It isn't really gender specific,unless you force yourself to be that narrow minded.

@dsmasynergy 2 года назад

Dont feed the troll

@Sandro_Southpaw Год назад

Because Women never ever use the term “Guys”🤷‍♂️🤷‍♂️

@David-hm9ic 10 месяцев назад

I'm not always particularly politically correct on such subjects but if a server in a restaurant wants to kill their tip, including my very obviously female wife as "guys" will tank the tip.

@reallyoldsubdude387 5 месяцев назад

Yeah, he can see your wife out there watching the video all right. @@David-hm9ic

@David-hm9ic 10 месяцев назад

Thanks! I use Evapo-Rust and I have an ultrasonic cleaner. Why haven't I used them together before? Faceslap. TIp: Fill the US cleaner with water, put the parts to be cleaned in a zipper freezer bag with a little of the cleaning solution. Last year I did just that when rebuilding a bunch of valuable model airplane engines and it worked great. No worry for loss of irreplaceable parts, either.

@bobwiley6221 7 дней назад

You can you can also Place Parts in a glass jar filled with whatever solution you want and put that in the water bath of the Sonic cleaner. I like using glass because I think the glass transmits more of the vibrations