RX4R ACCESS with Frsky X-Lite Pro. 

Thank you for this video i watched it a few times. I was wondering how many telemetry options you were able to see?. i can only see 4. i am using the same radio and receiver.

Thanks for the info. I really want this radio but I don’t want to be a beta tester.

THANK YOU THANK YOU

I'm honestly not convinced by this new process of register and then binding, for me binding should be able to allow to register at the same time and saved you some time. But i like the idea of being able to rename the receiver :) Inverted/uninverted smartport is not a big deal, just remap and use softserial on your FC and you will be able to inverted/uninverted using the CLI command tlm_inverted Have a great week and keep it up the great job!

Could you mention where you got all the sd card content you have for your xlite pro?? The firmware isn’t even out yet so I’m not sure how you got the sound pack and all that loaded already or I’m just missing something???? Any help would be amazing.

Hi TweetFPV, you really need to do a new analyse on this controller. I have it too & flying it with a XM+ receiver. As for the moduls, you could fit different types ; ). But what I haven't managed to do is run it on D8. There is supposed to be a way to do it & actually hoped you would've/could've done it. So I could learn from you to so it myself. Great review & take care.

The R-XSR ist now also available

Fantastic, man. Thanks a lot! 😊 But now I'm thinking... Do H7s support software inversion? 🤔

Great video, looking forward to more X-Lite Pro updates on your channel :) I'm currently waiting on mine to arrive, just hoping FrSky will offer some updates soon. Do you know if with the current firmware multiprotocol modules like Vantac MPM Lite will work?

Rx4r is my favorite 2.4ghz. Even better than the r9mm imo

Which receiver to use for "FrSky Taranis Q X7 ACCESS"?

can xlite pro be installed with a multiprotocol module? so that it can be used for the bayang protocol

Is there support for installing the TBS Crossfire module?

FR sky pissed me off with what they did with ACCESS. Does anyone actually notice an improvement with the obsolescence protocol?

The important info to me is how the new protocol works in comparison to the old in terms of latency, range, and consistency, any thoughts after flying with it?

Hi, I have a Taranis X9 Lite, there is no "ISRM" mode to select, only Access and ACCST D16. Is it even possible to use this transmitter with the RX4R? Thanks!

They have access firmware for rxsr on their website. Does it not work?

I was hoping to see you acually use ACCESS and fly with it to give impressions - is it any good? To be honest I quickly scrolled to see because I do not care how it gets installed or what to hook up in betaflight if it is not any better than my old gear. It's not your faults - I am waiting for that video to explain why we need this. The marketing from Taranis is horrible.

Excellent video. I have the same receiver I bought to use with my lite pro. I’m still having trouble with my SD card data and getting it installed. Don’t really know what I’m doing there and there’s literally NO info out on this thing other then your videos. It’s very frustrating.

Can you register without pressing the bind button or does the ACCESS auto bind only work once the receiver has been registered to the radio?

What. Never even heard of new firmware. Hopefully it will be good, seems to change really fast . Makes me like crossfire more and more.

The size of the RX4R is not as bad as it looks in this video...The version of the RX4R you show here has a lot of unnecessary x/tra stuff on it as it is the "with pins" version. I sell the bare-bones/un-pinned version of the RX4R here at Boulder MultiRotor LLC / bouldermultirotor.com which you can find for sale here: bouldermultirotor.com/product/frsky-rx4r-recei…els-without-pins/ and it's actually much smaller than you might think!...the reason for this is that you don't need the pins, the smartport harness/connector, the foam pad, or the cardboard/paper input/output labels cover. All you need is the RX4R directly soldered and maybe a little thin piece of clear heatshrink. Anyway, I thought this might be important to mention since for most FPV pilots, size does matter :) Also, one other thing...the video mentions that the R9M-Lite module will eventually work with the X-Lite Pro but I don't believe this is correct. Especially since Frsky just released a new version of external module for the X-Lite Pro called the "R9M Lite Pro" with the following description: "The R9M Lite Pro is the upgraded 900MHz Lite module. It has a high-speed digital interface, supports up to 1W RF power, and is fully encased in a CNC aluminum protective shell which also aids in heat dissipation when using high RF power. Designed with the new ACCESS firmware, it also supports spectrum analyzer functions. The module is perfectly compatible with FrSky new ACCESS radios like Taranis X-Lite PRO and X9 Lite." Here is a link to their website for this new product: www.frsky-rc.com/product/r9m-lite-pro/?.com&EMAIL_CAMPAIGN_2018_02_12_COPY_01&mc_cid=c00c2dffc0&mc_eid=ac2057c26e Frsky does currently have new ACCESS firmware for the RX4R, RX6R, G-RX6, and G-RX8 and they will eventually release new ACCESS compatible firmware for the following older receivers: RXSR, XM, XM Plus, RX8R Pro, plus I imagine a whole new line of ACCESS compatible receivers will be created since this is the direction they are headed. I'm glad they are finally jumping onboard with great features (that the TBS Crossfire already has) like OTA (Over The Air updates/firmware) and digital interface! Anyway, great video! Thanks for providing mostly accurate information (I do realize that some of the updated info I mentioned came out after the release of your video) and great step-by-step instructions for updating the RX4R to be compatible with the new X-Lite Pro!

www.frsky-rc.com/wp-content/uploads/Downloads/Firmware/R-XSR/FW-RXSR_ACCESS_v1.1.1.zip Have you tried Fport? If so how does access compare?

you need to make some "clickbait" type of title about this i bet it would get plenty of views!!!! Idk soimething like FRSKY XLITE PRO NOT READY FOR PRIMETIME??