Saab J-29 Bare Metal Finish 1/48 | The Inner Nerd

Подписаться 87 тыс.

Просмотров 56 тыс.

50% 1

Hobby Boss J-29 Tunnan in 1/48 scale by The Inner Nerd
Time lapse video of the full build, painting and weathering of the Swedish Air Force Hobby Boss J-29 Tunnan in 1/48 scale model kit as shown by The Inner Nerd
Airfix 1/48 Scale Gloster Meteor F.8 - Paint
• Airfix 1/48 Scale Glos...
Airfix 1/48 Scale Gloster Meteor F.8 2016 NEW MOULD (A09182) - Assembly • Airfix 1/48 Scale Glos...
Saab J-29 Tunnan References
images.app.goo.gl/1CbqiHXc9hZ...
images.app.goo.gl/RofvZSeDe6F...
images.app.goo.gl/xyP6NksisLT...
images.app.goo.gl/KGG8gWway8i...
images.app.goo.gl/9DdcbH7NHhD...
images.app.goo.gl/wgnFR8YG57c...
images.app.goo.gl/b33nX5tAY9D...
images.app.goo.gl/X2jHRhXzYX5...
images.app.goo.gl/bihrULuqQeu...
images.app.goo.gl/9nxXpj85pQk...
images.app.goo.gl/eiqX9cTkyFH...
images.app.goo.gl/Cxd5Y2eqAJk...
images.app.goo.gl/XTr5jrYVH4a...
images.app.goo.gl/pZKfaYpoQvU...
images.app.goo.gl/mxoxLxjvmD4...
www.primeportal.net/hangar/fre...
www.ipms.nl/walkarounds/walka...
www.cybermodeler.com/aircraft...
The first part of this video shows the use of Photo Etched parts and scratch building techniques on the Swedish Air Force Hobby Boss J-29 Tunnan in 1/48 scale model kit to detail hydraulic pipes and electrical cables professionally and cheaply around both the cockpit and wheel bays. Locitite 406 CA superglue is used in this process combined with CA superglue accelerator/activator to join the two dissimilar materials. Also used are details from Eduard Brassin which are additional parts to the Swedish Air Force Hobby Boss J-29 Tunnan in 1/48 scale model kit box
The second part shows the Swedish Air Force Hobby Boss J-29 Tunnan in 1/48 scale model kit surface preparation techniques such as filling panel gaps and seams with Deluxe Materials Perfect Plastic Putty modelling filler/putty and sanding them smooth to get a seamless join between parts using a range of sand papers from 800, 1200, 2000, and 3000p dpi grit papers. Also Black Basing techniques are included in this section using Mr Hobby "Mr Surfacer 1000, 1200 & 1500 Finishing Surfacer" thinned with Mr Hobby Self Levelling Thinner 400 to prime the surface ready for painting, sprayed through an airbrush using Harder & Steenbeck Evolution Silverline Solo Needle/Nozzle: 0.15mm with Badger 1100 with Anti-Pulsation Tank Working Pressure 22psi (1.51bar).
The third part of the video demonstrates the Swedish Air Force Hobby Boss J-29 Tunnan in 1/48 scale model kit using the BLACK-BASING technique to achieve a pre-weathered look and surface texture replicating that of an aged and worn aircraft. Harder & Steenbeck Evolution Silverline is used with Badger 1100 with Anti-Pulsation Tank Working Pressure 22psi (1.51bar). Also included in this section on the Swedish Air Force Hobby Boss J-29 Tunnan in 1/48 scale model kit is the Engine Exhaust painting using Alclad 2 Lacquers (Airframe Aluminium, Aluminium, Steel, Jet Exhaust, Copper & Pale Burnt Metal) and Tamiya clear paints to create a burnt metal effect. 3 layers of Mr Color GX100 Superclear III thinned with Mr Hobby Self Levelling Thinner 400 seal the decals in. This can be decanted and sprayed through an airbrush such as the Harder & Steenbeck Evolution Silverline Solo.
Next is the weathering of the Swedish Air Force Hobby Boss J-29 Tunnan in 1/48 scale model kit. This is started using Abteilung 502 & Winsor & Newton oil paints thinned with white spirit to a wash consistency. Then used as a panel line wash the oil is applied across the Swedish Air Force Hobby Boss J-29 Tunnan in 1/48 scale model kit to achieve a dirty, grimey & worn look. Further weathering including Unthinned Abteilung 502 Oil Paints to create streaking and water marks, along with AK Interactive weathering Pigments (Gun Metal, Russian Earth, Europe Earth, Medium Rust and Pigment Fixer, Worn Effects, Dark Streaking Grime Rainmark Effects) concludes weathering.
Items Used
Airbrush: Harder & Steenbeck Evolution Silverline Solo Needle/Nozzle: 0.15mm Compressor: Badger 1100 with Anti-Pulsation Tank Paint: Tamiya Acrylics thinned with Tamiya X-20A Thinner Mr Hobby Aqueous Abteilung 502 Oils - Black / Industrial Earth / Olive Green Winsor & Newton Oils - Yellow Ochre / Raw Umber / Burnt Sienna / White AK Interactive Pigments - Gun Metal, Europe Earth, Russian Earth, Medium Rust, Pigment Fixer Vallejo Masking Fluid Winsor & Newton UV Cut Matte Enamel Varnish Brushes: Pure Sable Brush - Various Sizes Glue: Tamiya Extra Thin Cement Tamiya Poly Cement Revell Contacta Professional Loctite 406 CA Superglue Sanding: 3M 600p / 800p / 1200p / 2000p / 3000p sheets & sponges Tamiya Polishing Compounds (Course, Fine & Finish)

Хобби

Опубликовано:

1 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 164

@TheInnerNerd 4 года назад

Hey everyone, I hope you enjoyed the video :) Thought I’d try something a little different to all the MIG-15’s and P-51’s with this one to show a bare metal aircraft. The process is roughly the same however and how dirty you make it is also up to you. Links to all my references are in the description below as usual. Happy modelling and stay safe!

@ScottKenny1978 3 года назад

This was definitely an unusual bird!

@MegaGronis 3 года назад

Were below? I can't see any references.

@iannicholls7476 4 года назад

“The Tunnan, SAAB’s least intimidating fighter”. I. Nerd you are a funny fellow! Great build by the way.

@stevenblack7928 4 года назад

True, tough I think it's looks badass, but that's my opinion

@xjrthirteen 4 года назад

Another fantastic video mate. Your Lightning build made me return to this hobby after a 35 year absence and, whilst I'll never be in your league, your videos have helped me become a more accomplished model maker, and I thank you for that 👍 Keep up the amazing work, it really is appreciated by so many in this community.

@TheInnerNerd 4 года назад

Thank you so much! That's one of the best comments I've ever had and it's great to hear that the videos inspire and help you guys out. When I started the channel I just wanted to show my journey, learning something new on each model, so the fact I can now help others is unbelievable. Thank you for following me and the kind words. The Inner Nerd

@cropstar 4 года назад

Great video, and a good build. Interesting subject too I love Swedish jets. Lockdown has inspired me to get back into the hobby after 30+ years off!

@TheInnerNerd 4 года назад

Thank you and thank you for watching. I hope the video can help along with the inspiration. If you have any questions jus let me know and I’ll help if I can. Good luck!

@Juan_Doooh 4 года назад

Nice work, its very realistic.

@Grayfox988 4 года назад

I'm mostly an armor builder, but the techniques you shared makes me want to build my own silver stovepipe like a Mig-21 to try them out.

@alec_f1 4 года назад

Your spray discipline with an airbrush is so much better than most anyone I see on RU-vid. It's sure better than mine.

@fredtedstedman 3 года назад

Wing shape reminds me of Grumman Intruder / Prowler , I love the look of this plane !😍😍😍 Wales UK

@TheInnerNerd 3 года назад

Thank you and thanks for watching :)

@fredtedstedman 3 года назад

@@TheInnerNerd I am about half way through my Hobby Boss Mig 17-PF , and enjoying the build !

@ThePereubu1710 Год назад

Back in the late 60's-early 70's, my dad used a technique for bare metal. He would use aluminium foil painted with an enamel gloss varnish. Place the varnished side on the model and then carefully rub down the surface with cocktail sticks, cotton buds etc. For complex shapes he'd cut the foil to match the panels. He'd then weather and detail using enamel paints. To my young eyes the result was very effective!

@driverlance 4 года назад

What a cool looking plane - I haven’t seen one of these before. It makes me think of a jet powered Fairey Gannet ha ha. Nice build.

@foreverplastickits138 4 года назад

Good work, the plane is so realistic! 👍👍

@jasonlee6744 4 года назад

Bloody loved it, and nice to see something unusual, really makes a nice change. Weathering is Brilliant. I’ve got loads of tips from you, thanks for sharing your work, it’s really appreciated. Jason 🇬🇧

@c8136132 2 месяца назад

Absolutely stinking build that, youve just made me order this kit!

@BennyCFD 3 года назад

Another terrific build.........I notice he uses a sharpened stick to apply the CA glue to small parts. Nobody can be a serious modeler without a stick. I've been using a stick for years.

@joakimkarlsson9255 4 года назад

Very nice weathering! Also, good call to drop the ailerons. On the SAAB 29 the ailerons are connected to the flaps and drop one third the way the flaps do (you did put the drop tanks on backwards though ;) )

@TheInnerNerd 4 года назад

Thank you and thanks for watching. Ahh damn it! 😂 I thought the fit was crap compared to when I dry fit them before painting 🤦‍♂️ thanks for pointing that out - I always do something stupid and thought I'd got away clean on this one 🙄😂

@travis_thompson 4 года назад

A really great job on a kit you never see built up, many thanks for this one :)

@arrrgee 4 года назад

Nice work, I like the idea of putting different shades down under the metal cote for the variation of tone, I think I'll try that for myself.

@Snoozie09 3 года назад

"the high psi dries the (metallic) colors before they hit the model" This makes sense, so good to know. Thank you!!

@jpht1964 4 года назад

Superb end result mate...

@allanjohnson3731 4 года назад

awesome build mate loved it .thank you :)

@2WheelsLiving 4 года назад

Fantastic work, really well done. It’s cool to see something that no one else has made a video on before, one very unique and interesting airplane as well, intimidating or not lol.

@evanandgemma1 4 года назад

Nicely done 👍👍

@johannmckraken9399 3 года назад

One of my favorite jet fighters and you did an outstanding job of bringing it to life. Thank you for sharing!

@TheInnerNerd 3 года назад

Thank you and thanks for watching :)

@panzer-meister 4 года назад

The SAAB Tunnan, I like it very much, Thank you !!!

@mariojulien001 4 года назад

Very good work. Thanks for the video

@user-Clint315 4 года назад

Really well done👍

@normangruss4426 4 года назад

Awesome NMF

@robbo1068 4 года назад

Beaut little aircraft.....done well. I particularly enjoyed the variety of weathering techniques and effects. Thanks!

@alvaro2338 4 года назад

Congratulations, good job !

@MegaGronis Год назад

I enjoy it. I have a 1:32 in balsa scratch build by my father . not completed . He build Lansen A 32 in Wood and a hood melted in the oven Superb.

@the-primered-thumb 4 года назад

Nicely done mate 😉👌

@theadventuresofjavier8698 4 года назад

Love the subject. I need to build this kit.

@nestoroster8868 4 года назад

beautiful model!! im going to use some materials that I didn't haver on the radar until saw this video

@bugler75 3 года назад

Great result with great tips👍🏼 Thanks very much. Ian

@TheInnerNerd 3 года назад

Thank you, Ian. And thanks for watching :)

@keithsmodelsandrcs6593 4 года назад

Looks awsome my freind very nice

@alandavis5950 Год назад

Good skills! I learned a lot from this. Especially the dulling of bare metal with a dark wash. Top tip! Thank you for sharing.

@TheInnerNerd 11 месяцев назад

Thank you and thanks for watching! :)

@SprueFascinationChannel 4 года назад

Magnificent build 👌

@theadventuresofjavier8698 4 года назад

Fancy finding you here my friend 😀

@richardbreisch8049 2 года назад

Nice work! Looks great, I really like the silver shades you've done to bring out the detail.

@TheInnerNerd 2 года назад

Thank you and thanks for watching :)

@mikeglenn1000 4 года назад

Fantastic job! Incredible skills and devotion to an "close-to perfection" performance to our hobby! You have been blessed with amazing talent. I always enjoy watching your videos...Mike G

@jzghostrider66 3 года назад

Very nicely done. NMF is never easy. I've never given it a go. But I will be sooner rather than later. Thanks for sharing this one.

@TheInnerNerd 3 года назад

Thank you and thanks for watching :)

@nicolebadham8511 2 года назад

Great J29. I showed a couple of girls in my class what I do for a living and they thought that this my yt channel lol.

@TheInnerNerd 2 года назад

Thank you. Our hands and voice must look and sound similar? lol Thanks for watchig and sharing :)

@jlrr5421 4 года назад

Guaauuu excelente trabajo

@christianrudolph1959 4 года назад

Good evening Modelcomrade...A realy nice Jet.. Greets from Christian

@girolamolorusso 4 года назад

nice job

@stevenanderson236 4 года назад

Very nice

@atencia5906 4 года назад

Congratulation 😉

@luislealsantos 2 года назад

Great build, great Iesson. love this plane. They only had sidewinder on latest versions, that's why no pylons were available on this kit. The F had them. Thanks for sharing,

@TheInnerNerd 2 года назад

Thank you and thanks for watching :)

@MegaGronis 2 года назад

I build Tunnan in 1:72 scale when i was 15 i think. i was satisfied with the model. Can't compare it with your model of course

@TheInnerNerd 2 года назад

As long as you had fun and learned something that's what matters. Modelling is being lost in the moment, making something with the skills you have and learning new ones. Thanks for watching :)

@patrickrobinson-mh5jw 4 года назад

I had this kit but got rid as told very under scale very good job well done

@Nambabwian 2 года назад

Hi Inner Nerd, thanks for your excellent video and build. I did the AZ Model kit in Austrian markings. The windscreen part you shaped at 2:03 is actually the rear view mirror on the aircraft if I am not mistaken.

@TheInnerNerd 2 года назад

Thank you for the info and thanks for watching :)

@themajesticmagnificent386 Год назад

As ever,beautiful build and so,so many great tips for bare metal finishes and effects..! Thanks for the wonderful video again and hope that F-16 didn’t scare you off You-Tube.(But then I couldn’t blame you on that.!)..Hope alls ok and we see more of your excellent work..All the best.!👍

@TheInnerNerd Год назад

Thank you. The F-16 put me off a little but nothing that mojo can't build back up. I'm working on a Bf109 in 1/32 scale and will become part of my first bigger diorama. I'll have it done by the end if summer ready for a video. Thanks for being patient :)

@Johnny-tt8zc Месяц назад

I have two of the hobby boss 1/48 J-29 ‘s. Saw the UN scheme and liked it, but the silver standard version is nice also. Hence two kits. Not sure if I should follow the instructions and use the #11 humbrol silver, do it in dull aluminum.. yours turned out lovely.

@TheInnerNerd 28 дней назад

Thank you. This was a nice aircraft to model and is still one of my favourites. I prefer the AK Xtreme metals over Humbrol, but that's my choice to recommend. Best of luck and thanks for watching :)

@user-sc6pk6ef2l 4 года назад

Привет 🖐️хорошая работа 👍, мне нравится, у меня вопрос ты собирал су 35 от xasegawa, что можешь сказать о модели, по сборке, копийности 🤔

@demo9192 4 года назад

Nice work! It might not be intimidating, but it's the only SAAB fighter that has actually been used in combat, so at least it has that going for it.

@wasrio1403 2 года назад

Nice work. The warning you should have mentioned is to be careful with masking on metallics I noticed this when you did the chrome section. You did fix it with a respray. Thanks for your video.

@TheInnerNerd 2 года назад

Thank you and thanks for watching :)

@BennyCFD 4 года назад

Once again incredible.............I was wondering, The ailerons both wouldn't be down. Each would be in the opposite direction.

@TheInnerNerd 4 года назад

Thank you and thanks for watching Benny! You'd have thought so but the pictures 299 & 2920 here show otherwise. walkarounds.scalemodels.ru/v/walkarounds/avia/after_1950/S29C_goshagk/

@ScottKenny1978 3 года назад

The Tunnan has drooping ailerons, so when the flaps are down the ailerons both go down part way. Gives better short-field takeoff performance.

@cygnusx10 4 года назад

Not a plane you see everyday. Nice finish, shame about those decals though. Great vid, thanks for sharing.

@109Eken 4 года назад

The problem here is that the model actually isn't in 1:48. It's to small and more equal to like a 1:52 scale. That's why the aftermarket decals are to big.

@TheInnerNerd 4 года назад

Ahh well that would answer it yes. Even still theres not much you can do about it and a waste of decals if you go and buy aftermarket ones! 🙄

@109Eken 4 года назад

@@TheInnerNerd you can always get the excellent pilot replicas J29

@NCTarheel55 3 года назад

Excellent build. What saw do you use to cut the resin ?

@TheInnerNerd 3 года назад

Thank you. I use a Trumpeter Hobby saw (the larger one) and a JLC Razor Saw as the finer of the two I used

@MegaGronis 9 месяцев назад

I like the j29. Only swedish aircraft in battle. UN service 1960.

@benemmerson2420 4 года назад

just wondering what sort of dremel/ engraver / rotary tool did you use in the video?

@TheInnerNerd 4 года назад

Its a Proxxon Micromot 50/e (it says at the bottom left of the screen when I am using it). You'll also need the power adapter too if you're going to buy one since its a shaving style plug and not a 3 pin if you're in the UK

@pouletbidule9831 4 года назад

I have a question : when you polish the decals, do you polish only around the decals or you need to polish the whole model ?

@xjrthirteen 4 года назад

I think he polishes the whole model after adding 3x coats of varnish. This flattens the whole surface and gives the decals a 'painted on' appearance.

@TheInnerNerd 4 года назад

Plastic Fantastic is right. 3 coats of clear and then a complete rub down of the model. This makes it smoother and flattens the witness from the decals underneath

@nkartakis 4 года назад

What dril bit you use with the dremel when making the cocpit addons?

@TheInnerNerd 4 года назад

It was a 0.5mm. That's the smallest I have but it was a good size to work with it turned out

@davidp7414 2 года назад

When you do the wash at 21 minutes in, do you let the was completely dry? How do you remove it? Thanks, I will be doing my first metal paint job soon.

@TheInnerNerd 2 года назад

Hello. The wash is never completely dry but touch dry. If there are ay pools of wash still wet then these will streak when you come to remove the wash and make more of a mess. I tend to use a dry cotton bud/pad to remove the wash since it won't stick fully to a gloss or satin clear coat. Matte you may need some white spirit or some other enamel thinner to remove the more stubborn stains. Hope this helps and good luck with your NMF. Thanks for watching :)

@juliocalvo1940 4 года назад

👏👏👏👏👏👏👏👏👏👏👏👏👏👏 excelent

@seanfoster3052 3 года назад

Did the application of the gloss varnish over the metallic colors make them lose their shine? I am new to NMF and thought that a gloss coat as a no go. You achieved a great finish on this one anyhow!

@TheInnerNerd 3 года назад

A clear coat does affect the overall finish of metal coloured paints so I wouldn't advise clear coating an exhaust for example which is made up aof a lot of different textures. The metal paints have different finishes, some are high shine, some less so to replicate a texture as well as colour. A clear coat will cover this and make them all appear uniform even thought the colours will be different. Depending on what your subject is, it may be affected by a clear coat more. For this one it was more about showing different colours of the same metal so the clear didn't really hinder the outcome. But for something with a high shine metal finish like chrome, a clear coat will take that effect away. I hope I've explained that well enough and thanks for watching :)

@seanfoster3052 3 года назад

@@TheInnerNerd thank you very much for taking the time to reply. Very helpful information

@lloydboyette4815 2 года назад

Might I suggest the Antonov AN-2 ? That should be a challenging build :)

@TheInnerNerd 2 года назад

Haha okay! Will have to find a kit if available. Thanks for watching :)

@lloydboyette4815 2 года назад

@@TheInnerNerd Hobby Boss 1/48 maybe ?

@shutterfish 2 года назад

Swedish Barell👍🤠

@TheInnerNerd 2 года назад

Thank you and thanks for watching :)

@nas4js 4 года назад

Alclad metal color aluminium is better or Vallejo metal colors?

@TheInnerNerd 4 года назад

I've never used Vallejo so can't say for sure. I really like the Alclad ones and all the AK Xtreme metal too. I find them easy to clean and apply as well as being excellent colour pigments that appear smooth and metal like

@ScottKenny1978 3 года назад

I haven't worked with the Alclad metals, but the Vallejo Model Air metallic colors are my go-to for figure painting. The Model Air range covers very well, which is unusual for metallic paints.

@MegaGronis 2 года назад

Yes I like it but what is the black stripes at 25:54?

@TheInnerNerd 2 года назад

Thank you. The black stripes are streaks and are a type of weathering commonly seen on this aircraft. I make them using oil paints which I drag to create a faint line, replicating the effect. Thanks for watching :)

@davidp7414 2 года назад

How soon after painting do you remove the masking tape?

@TheInnerNerd 2 года назад

Hello. I wait until it's gone dry enough to handle. Tamiya tape won't ever stick too hard so you can leave it several hours before removing it and it still won't lift the paint providing you've got a good base down.

@pulsar1-1 Год назад

BTW Those outboard "flaps" were actually ailerons, having both of them down is physically impossible on the real aircraft.

@TheInnerNerd Год назад

It's been mentioned further down in the comments and I realised this after I had built it also

@michalorszulik1018 2 года назад

grainy finish from black layer, why not wetsand clear varnish?

@TheInnerNerd 2 года назад

Hello and thanks for watching. I wet sand the clear layer here 20:15 before the weathering. That gets rid of the grainy texture you're referring to, so in the final photos you don't see any grainy texture you're referring to. Try watching the whole video before judging the job :)

@michalorszulik1018 2 года назад

@@TheInnerNerd Not meant to disrespect, 30.05 at wingroot, bet there is more on different angles.and looks sparkly under clear coat , not uniform- guess that just paint choice

@hertzair1186 4 года назад

Tunnen is Swedish for Barrel...The Flying Barrel

@TheInnerNerd 4 года назад

That’s correct. It’s spelled Tunnan to be correct and pronounced Tun-nan also

@fredericklidman1976 3 года назад

@@TheInnerNerd As a native of Sweden I concur. 😉

@ja37d-34 2 года назад

A weird kit, out of shape and scale.. But yours turned out nicely still. :) Aren´t the outer "flaps" ailerons and if one is up, the other should be pointing dowwards?

@ja37d-34 2 года назад

The model itself is not 1/48, it is smaller.. That might be the problem with the AM decals. I trust Printscale more than HB but I can´t say for sure. I do know the model is in the wrong scale however.

@TheInnerNerd 2 года назад

Thank you and yes it wasn't the best of kits although the fit was good. I think I did make a mistake with the wing area as it was difficult to see which side fitted correctly. Thanks for watching :)

@ja37d-34 2 года назад

@@TheInnerNerd It was an enjoyable watch and I got some good ideas1 The primer for the metallic for one thing..

@uniformmike05 3 года назад

Nice model! The decals on the after-market set are probably 1/48th scale but unfortunately the model is more in 1/52nd scale. BTW, did you finish the B-25?

@TheInnerNerd 3 года назад

Thank you. And yes that could be it. Strangley the cockpit must be 1/48 since the ejector seat from Aires fits okay! Anyway the main insignia match that of the kit so it's just the stencils it seems. And I have never built a B-25, you may be confusing me with someone else hahah

@uniformmike05 3 года назад

@@TheInnerNerd Then it might be an odd mix of scales. Still, it looks very nice and it looks like a Tunnan. I want to build one, but an earlier version without the saw-tooth wing that the Swedish Air Force used in the Congo. Aaaah!! Well, now you have to build a B-25! Yes, sorry, I confused you with someone else.

@soundwavs1961c 3 года назад

How much do you want for it I WANT IT!

@TheInnerNerd 3 года назад

I'm sorry but this model is not for sale. However if you'd like a commission build please contact The.Inner.NerdYT@gmail.com we can discuss a build of your own if you're interested :) Thanks for watching The Inner Nerd

@kazer298 4 года назад

very good but if i were you i would like to make it austrian

@BennyCFD 9 месяцев назад

Great build....................But one mistake. If one aileron is ups the other has to be down.

@TheInnerNerd 9 месяцев назад

Thank you and yes, i messed up the positioning of a few parts on this. Instructions weren't all that clear. Thanks for watching :)

@slayaishere125 4 года назад

i like your voice

@zackscrafts4819 4 года назад

Wait...your voice sounds similar... do you know a RU-vidr named wizartar

@TheInnerNerd 4 года назад

Hahaha this guy is Irish right? I know people get my accent wrong but I definately don't sound Irish! 😂😂😂

@zackscrafts4819 4 года назад

The Inner Nerd I’m not sure but your accent reminded me of him

@MegaGronis Год назад

Rain mark effekts?

@neilhaas Год назад

The Swedish Air Force mostly.

@TheInnerNerd Год назад

This was a fun build and a decent kit in many parts. Something different to the MiG-15. If you want the kit yourself you can see it's availability here www.scalemates.com/search.php?fkSECTION%5B%5D=All&q=1%3A48+j-29+tunnan* Thanks for watching :)

@nas4js 4 года назад

Seat belts are always matt finish, as the real one

@TheInnerNerd 4 года назад

They are matte? The whole cockpit is coated in matte varnish prior to fitting it into the fuselage. The highlights and shadows are painted on to give it some depth as they look flat painted in just the green colour

@neilhaas Год назад

👍🤗😊🤩⭐🌟🌠🇸🇪🇸🇪🇦🇹🇦🇹🇩🇰🇩🇰❤️💘. That's the jet I really want for myself. I like this jet very unique. For my collection. Where could I get this model jet for myself?

@Forestowo 3 года назад

Sorry to point out, but you often call enamel products (Ak, Mig wash) oils. This can be a little confusing. The project is usually very successful :)

@TheInnerNerd 3 года назад

Enamels and oils are based on the same medium so technically, to my understanding are the same. I use the same thinner for both so for the purposes of the video they are easier to classify as the same. You can also make a wash from the oils paints if you don't use the products from AMMO, AK etc. So would make more sense for people that do that method also. Thank you and thanks for watching :)

@MegaGronis 2 года назад

Nice job . But i prefer scratch build .

@TheInnerNerd 2 года назад

Thank you and thanks for watching :)

@pacomacaw2456 3 года назад

Ugly little jet beautifully replicated.

@TheInnerNerd 3 года назад

Thank you and thanks for watching :)

@TheModelorian 4 года назад

A beautiful build of an not that beautiful aircraft. Your modelling skills make it definitely less ugly. Please build the X-32. Maybe YOU can make a nice swan out of that ugly duckling.

@fasold2164 3 года назад

Maybe you are proud on your skills and your achievement, but I think the occasional modeler will not take these time-consuming and expensive efforts to build such a model. Buying all these bottled little remedies, primers, colors, thinners and so on is quite costly and what do you do with these items when you finished the model? Unless you commence yet another model with bare metal surface, these things are useless and stand around until they dry out. Unfortunately you didn't mention some faults of the kit. The mainwheels for instance are too large.

@TheInnerNerd 3 года назад

Yes I am quite proud of this model since getting a good surface finish using the metallic paints is quite difficult. If you are an occasional modeller you can take away what you like from this video, it’s your build. I however am not an occasional modeller so have many more uses for these time consuming and expensive remedies. Of course you don’t need to buy them all, but you will if you want to complete any model to this level of finish, you will. Bare metal paints can also be applied on jet exhausts, because they too are metal finish, so will not go to waste and dry out. I would also like to see a list of aircraft that don’t or could’ve feature some sort of metallic surface on them. Even chips are a metal finish... I didn’t mention the problems with the kit because that’s not what this channel focuses on. I don’t review, I show the art of modelling. Other channels and forums can count rivets and measure inaccuracies if they like, but they don’t cover what I do. I’m sorry if this video didn’t meet your expectations and thanks for watching :)

@PeteCourtier 2 года назад

If you spend peanuts on paints etc then you have to lower your expectations. I have a good selection which I’ve collected over the years. If you store them probably they really last.

@neilhaas6024 4 года назад

The Israeli air Force is my kind of air Force.

@TheInnerNerd 4 года назад

Is that really 😆😆

@neilhaas6024 4 года назад

I love the Israeli air Force, the Israel defence forces.

@TheInnerNerd 4 года назад

Would you like to see me make an F-16I SUFA in the future then?

@MegaGronis 2 года назад

This is overkill. but nice done!

@MegaGronis Год назад

yuo missed some fly scat on the left wing.

@MegaGronis Год назад

I have 0,3 mm drills.

@MegaGronis Год назад

Nice but this is overkill.

@MegaGronis Год назад

Nice work. I know some persons friends in Kumla and will visit the flygvapenmseet in Linköping and see a J29.

@TheInnerNerd Год назад

Thank you. I have been to the Flygvapenmuseum in Angelholm to see the Tunnan there. Came home with Tarangus' Viggen in 1/48 too, can't wait to build that one. Thanks for watching :)

@MegaGronis Год назад

Nice Video!

@MVeminor7 3 года назад

Hi Mr. Inner Nerd, I've notice that you place decals in two different positions. One way is to set them perpendicular to the fuselage and the other way is to set them parallel with the cant of the wing. I'd like to think you are accurate however, I've rarely seen them parallel to the wing. I've seen them more often as perpendicular to the fuselage. I'm sure you are accurate to the replica but, I was just wondering. Signed, An astute subscriber. Thanks for sharing with us.