Setting Up the Height of Presser Foot (Singer 241-12)-TUTORIAL 4-Car upholstery 

Thank God I found this video, I have singer 201p machine and I wanted to use industrial presser foot , I almost gonna sell my singer machine for that reason and you just saved me. Thanks heaps

I used my husband big screen. Looked for hours about industrial 261-22 and wore myself out watching videos to remember how to oil it. He then got an email from Mr Cechaflo and couldn’t refind it. I have refound it. I am so grateful for the information he has given and this is from my email. I printed page 7-8-9 and am going to oil which I did years ago remembering I had to lift the machine , knew not to do from the top!! But have to figure how to remove the belt. Thank you so much.

Thank God I found this video wanted to change foots then something when wrong I watch your video step by step and fixed my own machine industrial brother thank u so so much it's the 1st time I fix my own machine

Extra extra video koristan nemam riječi svaki vas video me iznenadi sve bolje

You are always great sewer forever!!

Thank you so much Bhai apki video ki madad se mari machine me ne khod hi thik kr li

Thank you! You teach a lot with no words! Excellent videos.

Thank you for the instructional videos, they are great.

Thank you! Excellent!

Thank you for this !! Just got one and this helped out a lot

HI Cechaflo i have been looking at your videos and o been learning a lot i thakyou for helping with your time and patient to record videos for us God bless you.thanks

Gracias profesor es muy importante su repuesta para mi

thanks for the good information...God bless...doug (canada)

muy buenas las enseñanzas

Informative video.thanks

I learned important repair tricks about my seeing machine from your video thank you so much🌷🌹🌻

Thanks for making these videos, they are so helpful! I needed to raise the presser foot higher on my 111w; I think this will do it....will try it later! Thanks again!

very very thanks

Good

thanks to this video I was able to adjust the presser foot, Because even if he pressed the button above, the foot presser foot was loose. Was correctly adjusted. The other problem I have is that when I put the controls to sew straight, sew crooked as if it had a little zig zag, could you give me some advice? It's a kenmore 158,923 thanks

Muchas gracias por su información

Hi Sir`Great vid again ,now I know what these presser foots are used for,cheers.

Nice

Does that presser foot height adjustment effectively make your 241-12 a -13 model? There really are differences between these the two models - but not huge differences. Singer describes the 241-13 to be "For sewing Heavy an Extra Heavy Fabrics" and a presser bar lift of 3/8" (5/16" on the -12).

Hi Cechaflo, thank you for all of the videos you make and share; they have helped me out immensely. I was able to follow this video perfectly to alter my Yamata FY8700. Because you are so knowledgeable I am hoping that you maybe can answer a question for me. I own two Singer 111W155, one I use all the time while the other has been sitting as a backup. My problem and or question is regarding the height/lift clearance of the presser feet, specifically I have been trying to find out if there is anyway that I can increase the clearance so the machine can take thicker material. I’m sewing industrial automotive upholstery (vinyl and leather materials) backed with ½” thick foam. I have a very hard time trying to squish the 1” of foam and material under the walking feet to begin sewing. As of now I have not figured out a way to increase the clearance, so I am hoping you may know how, or if its even possible. I mention that I have two identical walking foot machines, because I figured if I could use one for normal thickness sewing and alter my second machine to accommodate the thicker material, so I would not have to purchase another machine. So is its possible to increase the clearance/height of the presser feet on a walking foot machine to accommodate thicker material, or do I simply need to purchasing another machine?

Nice annyya

subtitulos en español por favor. gracias

thanks for the awesome videos. they all have been a great help to me. I have a question, I have a singer 111g156 that I bought at a real good price. I managed to bring it back to life. changed the timing belt, timed the hook and needle, adjusted the feed dogs, changed the take-up lever (because it was broken) & added a servo motor. everything works now & it sews fine. the only trouble I'm having is my (SPI) stitch per inch. I have it at to the biggest stitch which is 5 SPI. when I sew a single piece of auto upolstery material or even a piece of paper I get 6 SPI. When double that to 2 layers I get 7 SPI & when I double that to 4 layers I get 8 SPI. Any idea on how I can fix this. I've looked through the manual and online and can't find anything on this. Thank you very much for any help you can provide.

Hola señor cechaflo"quiero preguntarle, mi máquina es una singer recta y, hace vastas y saca Piojo que puedo hacer gracias.

Que buena esa máquina che..anda un lujo... parece re práctica...

Hi, can you say where you can purchase those type of pressure foot in your video? Thanks

Hola están muy bien tus videos y me han ayudado en mucho.. Tengo una máquina Singer y el prensatela no baja, cuando bajó la palanca.. Se queda arriba como la arreglo..necesito de su ayuda.. Gracias

Again great video. I want to change my sewing machines to sow facemasks but having problems with tension and timing. The pressure foot can it be a feeding problem?

I need help! do you know how to adjusting the height of the foot lifter for Juki 8700? could you tell me please, I pay someone to come fix my machine, but he can't fix it. thank you very much

Wow. Your end stitches are perfection. I have a quick question. Hahaha...one of many... ok, so on "the pfaff 463" the thread is wrapping and tangeling around the point you describe in this vid as the little finger that fits into the little notch of the inside part of the shuttle. And I mean really gets wrapped up. I stepped away from that machine for a little while. So discouraging and a bit frustrating. So when are you guys moving next door here? Lol. In my dreams.❣Hope you guys are well. Xoxo

Can this be done on a domestic machine???

Please help me my problem is that when I remove the foot with my knee that decreases the thread tension which does not reach its position and causes a problem in the sewing after .

Did you make the needle plate bigger or can I buy a bigger needle plate because my thread keeps tearing. I’m using a needle 22 with thread t135 with exactly the Same sewer. But your needle holder is different

Ayuda la palanquirta para rematar hilo esta muy suave no se que le paso y la sierra nose regresa ni jala la tela

Hola don cechaflo como ha estado, Me podría decir cómo Alargar más la puntada de la máquina Singer Model 241-13 Por favor

Hola César espero estés bien, una pregunta el mismo procedimiento aplica para una maquina walking foot o triple transporte como decimos acá en nuestro país? gracias de antemano

Helw ,,any ov ur vidx using with thread in needle ?

Hola disculpe queria mover el prensatela y nose que paso que el prensatela ya no levanta ni la rodillera ni el gancho de atras ninguno de los dos levanta el prensatela ..Por favor ayudeme

Bhaiya aap yah bataiye umbrella machine ke pressure foot ka dabav kaise kam Karen

I have a JUKI DDL-8700, my tension disc won't release. I did check and dismantle the thread tension assembly and found out that the problem is the cam that is supposed to push the pin does not move when I pull the the pressure foot lever up.

I want you to ask .. I have an industrial sewing machine and it became a budget imbalance and tried to correct it in various ways, but increased complexity and I have no other and to pick up my life ... And I know that I sew the skin only .. What is the solution, teacher ... I hope you Video to modify the budget of the machine .. Your goal, as well as you do not honor ... Thank you and God increase your diligence and diligence in your work

Muchas gracias por los vídeos, acabo de comprar una maquina de doble arrastre marca Kensaw, he notado que cuanto pongo velocidad sale humo, note que el pie pequeño rosa con la aguja, eso es lo que ocasiona fricción como puedo centrar a la punta de la aguja... le estaré muy agradecido si me ayuda (he visto sus vídeos, teniendo la esperanza de ver eso pero no he encontrado alguno que pueda ayudarme).

buenos días profesor tengo una máquina recta industrial y mi problema es que al coser vibra mucho el rematador y tengo que bajar la puntada para que no vibre el rematador.me gustaría que me ayudara con eso.gracias un saludo

Mi máquina es marca singer 3323 esta cosiendo flojo pero revise la tención y ya quedó bien pero mi problema es que tengo que dejarle la tención en nueve

profesor para el prensatelas semi pesado o liviado que altura debe tener cada uno .gracias

Hola profesor tengo un una máquina recta siruba al subir el hilo del cangrejo toma lasada y se corta le suelto el tornillo del porta carrete igual se corta como que no puede salir ayudeme por favor

Padhem pelt paena unde Penske ravatam ledu peleg Anna chepp

Me puede ayudar gracias

How to adjust it in singer 298 model

Puedo husar ese método para una consequences 206 ?

para agrandar la puntada después de su límite como se le ase para que de la puntada más grande

Saludos cual es la altura del pie

How i long stitch my juki ddl 555 single needle ?

flate machine ko repair kaise kren

te olvidaste del hilo

Hindi

поучительно, но очень нудно.