Тёмный
No video :(

Shark vacuum HOSE repair-Works like NEW! 

Clint Moar
Подписаться 398
Просмотров 232 тыс.
50% 1

Here I replace the vacuum cleaner hose that split on my Shark Navigator. Use TIME STAMPS below (for faster viewing)!
Please note, repair at you own risk as their are possible fire and electrical hazards.
Before you go buy a new vaccuum or a hose replacement, maybe your Shark Vacuum can be repaired?
Here's my Shark Navigator hose repair.
Hope this helps.
I'm not sure if this relates to a Dyson hose repair?
Please Note, repair at you own risk as their are possible fire and electrical hazards. Be Safe!
0:44 Short hose intro.
1:43 Short hose threads.
2:50 Long hose intro.
3:06 Tools that I used.
3:30 Long hose threads
4:25 Removing plastic handle (tricky part!).
5:19 Removing plastic end piece (most important!).
6:40 Separating 2 plastic handle pieces.
6:50 Grounding wire? (also important).
7:28 Only broken part.

Опубликовано:

 

26 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 118   
@j.michaelknighten7039
@j.michaelknighten7039 4 года назад
Thanks for taking one for the team. The plastic was still tore up a little, but at least I know that it can come apart and how. Thanks again.
@ClintMoar
@ClintMoar 4 года назад
Your welcome.
@jpettymd
@jpettymd 5 лет назад
The little gray and red button... push the button down and use a screw driver to pry the gray part forward and that will slide off. Watch out or the spring will come flying. Once you get that off the collar just slides off and the rest is cake. Thanks for posting.
@ClintMoar
@ClintMoar 5 лет назад
Awesome! Your welcome and thank you for the tip Joe.
@TinaICXCNIKA
@TinaICXCNIKA 4 года назад
Hey Joe and Clint! I am SO CLOSE to getting that gray ring and last purple part with the red button off (thanks Joe for letting us know how to get the red button off!). Not sure how this is all going to turn out, yet.😉
@btothemay
@btothemay Год назад
THANK YOU
@nonelost1
@nonelost1 2 года назад
That lavender vacuum of yours looks like an NV 22L. I got one of those that I trash picked last year. No problem with the hose on that one, but I just trash picked a shark navigator model UV410 today, that does have a hose problem. It also needs the bottom of the dust cup, as well as a good cleaning.
@ClintMoar
@ClintMoar 2 года назад
Hopefully you can get them all working.
@scotsabo2716
@scotsabo2716 Год назад
I looked at several shark hose repair videos before I found this one with the secret sauce. I had the same problem, took screws out but could not figure out how to get the clam shell completely apart. I was depressing the red button and trying to slide the end piece off but wouldn't budge so I figure i'd better do some you tube research before I end up breaking it. Now I see how it comes off I have confidence I can complete this. My only concern is the red button so I will need to figure out if I can get the tube off without removing the button or I will have to figure out how to remove it with out breaking it. Thank you for providing this critical part of getting this hose assembly apart.
@ClintMoar
@ClintMoar Год назад
You're Welcome Scot. Glad this helped and best of luck on your repair.
@teatatuemery24
@teatatuemery24 5 лет назад
YAY Thank you my poor hose was held together with tape on tape up on tape shocking. The amount of money I've wasted having to wait 20 mins for a vacuum shop to fit it and all I needed to do was twist both ends lol thank you so much 😀😄
@ClintMoar
@ClintMoar 5 лет назад
Your welcome. Glad it worked and thanks for the comment.
@FirstLast-zo4qy
@FirstLast-zo4qy 4 года назад
Very helpful. Especially loved the index so we could go straight to the part of video we needed to see. Thanks
@ClintMoar
@ClintMoar 4 года назад
Good to hear and thanks for the feedback Brittany!
@macoeur1122
@macoeur1122 Год назад
Well this officially settles it! I can now say I can find just about anything I need to on RU-vid! I have already bought a replacement hose/handle once...(the come as one piece) and now it has split as well. if I keep buying new hoses every time it splits, pretty soon I will have spent enough to buy a whole new vacuum. And I hate to throw an otherwise perfectly good vacuum into the landfill over such a small problem. I've ordered the proper bit set (mine are tamper proof) and hopefully I can continue to solve this recurring problem until the rest of the vacuum needs to be trashed. Thanks a million for the video! I really did want to see if my idea is even possible before spending the money on the new bit set!
@ClintMoar
@ClintMoar Год назад
I know, RU-vid so great for how to videos! Good luck.
@kitkelley1908
@kitkelley1908 6 лет назад
Thank you for this tutorial. Very well done. I can now finish repairing my vac! FYI--I replaced those little cheap-ass-rubber-tearing-apart tiny front roller wheels on the bottom with wheels I removed from a Matchbox car sold at Dollar Tree stores!
@ClintMoar
@ClintMoar 6 лет назад
Thanks for the compliment Kit. I'm not sure which wheels you're referring to? I don't think I've had a problem with them...
@Wahinies
@Wahinies 6 лет назад
Thank you so much for taking the time to make abd post this! It seemed like the tubing that was threaded was either glued or fused by heat.. They don't want to make this repair easy lol I had to use brute strength to pull the wire out of the plastic. You saved us time money and above all sanity, thanks again!
@ClintMoar
@ClintMoar 6 лет назад
Glad to hear. I had to use strength to but I didn't want to make it sound too difficult in the video. Your proof it can be done! Thanks for the comment.
@danm4935
@danm4935 7 месяцев назад
Thanks for the video. I think i will just replace the top hose with a shark brand replacement.
@ClintMoar
@ClintMoar 7 месяцев назад
Yes, I don't blame you Dan, now that they are making it easier.
@ClintonSr
@ClintonSr 6 лет назад
From one Clint to another, thanks for posting this. :-) I had to remove a very large ink pen from inside of the hose of this same model. After removing the pen, I noticed the grounding wire and plate that I had NOT noted before taking all apart. Seeing how you had it lined up at 6:50 saved the day for me. My vacuum is back to 100%! Great video!
@ClintMoar
@ClintMoar 6 лет назад
Thanks for that Clint! I'm not sure if there would be any problems but it's better to be safe than sorry right.
@dottiejanowski
@dottiejanowski 7 лет назад
this video was so helpful. thanks. i have a newer shark navigator vacuum but still has a similar design. i had a toy stuck right in the hose at the end where the handle is and got it out by opening it up.
@ClintMoar
@ClintMoar 7 лет назад
Ahh those toys...mine usually gets filled with a toy mixed with dog hair...Glad it helped +followthehendersons
@cscar1385
@cscar1385 8 месяцев назад
Good video. Thanks for the help
@ClintMoar
@ClintMoar 8 месяцев назад
Your welcome. Thanks for your comment and glad it helped.
@ragdepc
@ragdepc 4 года назад
Something you forgot to said in the video is you have to take off the red clip in order to be able to remove the front tube. I just find out after look at your video multiple times. By the way, thanks for your help, before I was sure can not take it apart (Because I try it before and give up)
@ClintMoar
@ClintMoar 4 года назад
Thanks for the clarification. Your welcome and glad this helped you.
@zrulz
@zrulz 7 лет назад
You can put a little dishwashing liquid or hair spray on the hose to help it screw all the way into the fitting. You cannot wait long with hair spray or it will get sticky. A little dab of hand soap or dishwashing liquid like Dawn is best. Put it in the threads inside the fitting and a little on the outside of the hose. THERE IS USUALLY ENOUGH HOSE IN THE SHORT BOTTOM HOSE THAT I CAN AFFORD TO CUT ABOUT 3 INCHES OFF AND THEN SCREW IT BACK IN.
@ClintMoar
@ClintMoar 7 лет назад
Yes thanks +zrulz. I have used the dishwashing soap trick to. That would make it even easier.
@angelanicholasstonehicks6431
@angelanicholasstonehicks6431 2 года назад
Great video! Precisely what I needed to see & hear & watch to fix my same vacuum. Well done. Direct information extremely helpful.
@ClintMoar
@ClintMoar 2 года назад
Thanks for mentioning Angela. So glad it helped!
@caseypivarnik4356
@caseypivarnik4356 4 года назад
Thankfully someone can show us how to get this devil ring off! (Still working on it but at least there's finally proof it can be done!)
@ClintMoar
@ClintMoar 4 года назад
Yes, there is hope Casey!
@dcfred777
@dcfred777 7 лет назад
Thank you so much for this tutorial this helps so much!! I wish you knew how to get that button off a little easier. At least I know now that I have to pull that part off so I can crack it open I almost complete broke it by trying to pry it apart!
@ClintMoar
@ClintMoar 7 лет назад
Glad to hear this helped you dcfred777. Agreed, the button is tricky.
@greghollinger9370
@greghollinger9370 2 года назад
Thanks fella, plastic snap and pop. 😁. Needed that info.
@ClintMoar
@ClintMoar 2 года назад
Glad it helped. Your welcome Greg.
@dtman66
@dtman66 8 лет назад
Nice video! I have this exact vacuum and went thru exactly what you did trying to get that handle apart, the only exception is I gave up and bought a new handle from Shark. I think it was 20 bucks! Thanks for making this video!
@ClintMoar
@ClintMoar 8 лет назад
Thanks for your comment and your welcome. +dtman66. Yeah, I'm stubborn and would not let the vacuum win!
@ClintMoar
@ClintMoar 4 года назад
@OneDayAfterAnother thanks for this comment! Sorry it slipped through the cracks and I didn't see it.
@noahmcfadden1658
@noahmcfadden1658 7 лет назад
Thanks for this tutorial. Never knew those hoses just screwed in. My VAC is fixed.
@ClintMoar
@ClintMoar 7 лет назад
Most welcome Noah McFadden.
@robinlugosi3961
@robinlugosi3961 2 года назад
Thankyou !
@ClintMoar
@ClintMoar 2 года назад
You're welcome Robin. Did it work for you?
@crandall777
@crandall777 4 года назад
Thanks Clint
@ClintMoar
@ClintMoar 4 года назад
Very welcome. Hope it saves you a couple bucks!
@andytaylor1588
@andytaylor1588 7 лет назад
Great solution for those vacuums that are out of warranty.
@ClintMoar
@ClintMoar 7 лет назад
True Andy. I rarely think about warranty.
@ClintMoar
@ClintMoar 6 лет назад
hmmm...interesting, though, I believe the rubber just wears out with time and all the air flow dries it out. I have never really thought about what would be covered under warranty, I knew it was old and I just fixed it. Thanks for the comment Mark.
@jimmyross4352
@jimmyross4352 5 лет назад
Very helpful, thank you. I was wondering what held the hose in there.. I did not think to un-screw it, instead I thought it might be glued and I would have to buy the hose with the couplings for our Shark Rocket. But I could not locate anything like that on line. Hopefully I'll be able to put Humpty Dumpty all back together. The Rocket model has to come all apart to get to it's broken hose.
@ClintMoar
@ClintMoar 5 лет назад
I don't know about the Rocket. I don't believe the hose was glued. Because the hose was more "rubbery" than Plastic it seemed to grip the threads better. Again, not sure about a Rocket. Good luck and thanks James.
@chriszenier826
@chriszenier826 3 года назад
Thank you!
@ClintMoar
@ClintMoar 3 года назад
Your welcome Chris. Hope it helped.
@chriszenier826
@chriszenier826 3 года назад
@@ClintMoar it definitely helped! That end piece is what was driving me nuts.
@patriciaparis2911
@patriciaparis2911 6 лет назад
I made a mess trying to fix mine as it was glued into the top so hard. I have ordered a new one $58. NZcurrency Lucky if u have no glue in the part. This is the second hose that has split. No guarantee on the hoses either.
@ClintMoar
@ClintMoar 6 лет назад
I can imagine that some may get over glued. I did make sure I bought a very good quality hose for the replacement, not a cheap feeling plastic one. Good luck with your next one.
@hajerm
@hajerm 6 дней назад
great video! thanks for making and sharing :) my Shark vacuum has special star screws :/ not sure how to get those out, not a screwdriver that i have ever seen. Any ideas?
@ClintMoar
@ClintMoar 5 дней назад
Even though that looks like a special screw it should be available from a decent hardware store. It may be a Torx that are easily available. Or, it is a special security type screw, then if you go to a specialized "Nut & Bolt" shop, they will have them.
@hajerm
@hajerm 3 дня назад
@@ClintMoar Thank you!! that is EXACTLY what they are :) and i see that Harbor Freight sells a set for $6
@ClintMoar
@ClintMoar 2 дня назад
@@hajerm Your most welcome. Good luck!
@OuzoLouGarage
@OuzoLouGarage 6 лет назад
My shark hose split this week . Thanks
@ClintMoar
@ClintMoar 6 лет назад
Your welcome Lou.
@IamKittySweets
@IamKittySweets 5 лет назад
my vac hose is yanked out of the handle, I can see a copper wire stuck inside the handle .. of my navigator nv 355 ..( Im told they call this hose an electro magnetic hose) your video shows me how that wire should be attached . :)) the hose is shredded on the other end also.
@ClintMoar
@ClintMoar 5 лет назад
thanks for the comment Kitty. I'm not sure that I understand though? Can you make your point in another way?
@IamKittySweets
@IamKittySweets 5 лет назад
edited !! thanks !!! 🔨 🔧
@chrisblester37
@chrisblester37 5 лет назад
Thanks should save me some dollars iv got 2 and I want another 10 years out of them the cord goes after a while I shortened it a few times then put a new one on
@ClintMoar
@ClintMoar 5 лет назад
You bet Chris. Here's to a few more years.
@dustinbrodie
@dustinbrodie 6 лет назад
oh my God! thaaaank youuuu
@ClintMoar
@ClintMoar 6 лет назад
HA. Your very welcome DB.
@karrimusicviolet4157
@karrimusicviolet4157 2 года назад
I could Not get that front part off to save my life. It's Not meant to come off & then you also have the static wire to contend with. The whole unit is like $40 on eBay. I bought a longer hose to replace my broken one with, it has the same click in part, I'm just guna see if I can find a generic handle with the same diameter.
@ClintMoar
@ClintMoar 2 года назад
Sorry to hear that Karri. Good luck and let us know how you make out please.
@momzilla9491
@momzilla9491 3 года назад
Hi Clint, I just bought a Shark NV 830 *Duo Clean brushes and love the machine but HATE how short the hose is. Do you think there is any chance of using your method to splice two hoses together? I do realize that by making the hose longer I might loose some suction, but having the dirt cup falling over on me while dusting when trying to reach more than 3 feet away is madding. Thanks!
@ClintMoar
@ClintMoar 3 года назад
Hey. I did a bit of research and it is difficult to say how easy it would be to replace. I wouldn't recommend trying to splice though. You could possibly try to change the hose yourself though you'll have to be comfortable with either jerry rigging of things don't go perfect or possibly having to take it to a vacuum cleaning repair company to finish if you can't complete it properly. I guess it depends on your comfort level and if the annoyance outweighs the possible repair costs. Good luck. Let me know what you decide to do!
@nataliyagolub9050
@nataliyagolub9050 8 лет назад
how do you fix the other side of the hose? where it is attached to the bottom? if that part cracked where it is attached to the suction.
@johnh320
@johnh320 8 лет назад
+Nataliya Golub i don't think you can on the NV42! i am going to call my local vacuum repair shop tomorrow. as far as i can see, the upper end is part of the bracket. right now i am using duct tape
@ClintMoar
@ClintMoar 8 лет назад
+Nataliya Golub If you mean the part that I show at 1:02, both parts are threaded and screw in. To remove, you'll have to cut with snips and remove with pliers. It will probably be glued in so you won't be able to unscrew.The old will be destroyed so make sure you have a new one!
@andrewscott1253
@andrewscott1253 4 года назад
A link to where I can buy this hose would be good, I have a shark NV44 any I can't find the whole assembly so I would just like to change the hose.
@ClintMoar
@ClintMoar 4 года назад
Sorry Scott, I don't have that. I just took it to my local vacuum repair company and they had some.
@andrewscott1253
@andrewscott1253 4 года назад
@@ClintMoar Thanks for the quick response. I could not find one online, I ended up buying a different part knowing I might be able to swap the hoses over.
@ElChile2010
@ElChile2010 7 лет назад
Does anybody know how to replace the power cord of a shark rocket vacuum model nv 480 26, any help would be really appreciate it,thank you ver much.
@ClintMoar
@ClintMoar 7 лет назад
Hey +elchile2010 I haven't changed mine either but would love to see how to...anyone?
@ElChile2010
@ElChile2010 7 лет назад
It would be great Clint!
@karin9087
@karin9087 6 лет назад
I hqve the same problem for about 5 months and i ordered the hoze but the store hasnt have the hoze for 5monts... i will try this way thank you! Is this hoze (the new one) universal?
@ClintMoar
@ClintMoar 6 лет назад
No, I don't believe they are universal. I took the old one with me to the vacuum repair shop to compare. Let me know how it turns out for you 😀
@ilyasalikhan
@ilyasalikhan 8 лет назад
You mentioned that you are using a quater inch vaccum hose, did I hear that right? I have a Shark Professional Navigator Lift-Away Upright Vacuum, NV355. It looks like a 1-1/4'' hose will go with it.
@ClintMoar
@ClintMoar 8 лет назад
+Fouzia Fatima I believe the 1/4" refers to the coiled wire size inside. I think this matters because the "threads" that screw into the plastic parts.
@Equinox2021
@Equinox2021 6 лет назад
Fouzia Fatima I was wondering the same thing
@Sunnysets
@Sunnysets 7 лет назад
The hose on these vacuum's suck! They don't stretch enough either. Mine is shot and I think I am going to just look for another vacuume that doesn't tip all the time when I use this short hose which I do a lot. Thanks for the video tho.
@ClintMoar
@ClintMoar 2 года назад
That is true and frustrating.
@pyt7778
@pyt7778 5 лет назад
Hi Clint, I can't find any answers to my Shark issue! I bought a cordless duo last year but as I'm in Ireland they say I'm not covered under the 5 year warranty. I have checked every thing, bought a new floor nozzle, then a new motir/handheld, then new filters....the machine at first stopped picking up and switches off after 4 mins due to overheating, then the floor nozzle arrived, picking up but now the dirt/dust bypasses the bin completely and clogs up the nozzle and tubing causing it to still switch off. . I have done all the trouble shooting I can think off, plus it costs a fortune to keep calling them from here. Please can you help.....at the end of my tether with it!!
@ClintMoar
@ClintMoar 5 лет назад
Gee Connie, I'm not sure. The only thing that comes to mind is the Shark has some kind of safety feature to turn off if the filters are wet/damp. When I clean them, I have to give them a long time to dry before using. Hope you solve it.
@pyt7778
@pyt7778 5 лет назад
@@ClintMoar Hi thanks for your reply. With the new floor nozzle it seems to be picking up better, I have new filters in the machine. But now, the dust/dirt is completely bypassing the dust container and going straight into the noozzle and tube, so it still switches off after a few minutes because it's getting clogged up. Any ideas why this is happening? Thank you in advance!
@ClintMoar
@ClintMoar 5 лет назад
@@pyt7778 I don't know. Maybe you could upload a full video of what's happening and we can all see what you mean?
@pyt7778
@pyt7778 5 лет назад
@@ClintMoar Sure, it'd 'be great to get some feedback on it. As I say, now it is picking up, but the dirt is not going into the canister, Just blocking the handheld nozzle and sometimes the long tube(main body of the Duo clean). The canister stays practically free of any dust or dirt. And its costing a bomb to keep calling Shark UK from Ireland, and they won't call back. Getting fed up with it now, I love Shark when it's going well, but I never had any issues with a Dyson, so next purchase I might switch back....was hoping that wouldn't be for a few years yet though. Thank you again Clint.
@jacksonvang3429
@jacksonvang3429 4 года назад
What is the release button called? I want to order one. Pls
@ClintMoar
@ClintMoar 4 года назад
Good question. I'm not sure. They probably have a phone number you could call and ask.
@ilyasalikhan
@ilyasalikhan 8 лет назад
Does the new hose have wiring inside it to connect to the copper wire?
@ClintMoar
@ClintMoar 8 лет назад
hmm. I can't remember exactly. I believe I reused the existing part that had the copper wire attached and just attached the new hose to it.
@d.lawrencemiller5755
@d.lawrencemiller5755 5 лет назад
How did you get the red button off???
@ClintMoar
@ClintMoar 5 лет назад
I don't remember exactly David but I think that is the part I broke by accident. I super glued it and it has held on fine.
@d.lawrencemiller5755
@d.lawrencemiller5755 5 лет назад
Darn. Alright, thanks anyway.
@brentmac9803
@brentmac9803 7 лет назад
Where did you get this hose from?
@ClintMoar
@ClintMoar 7 лет назад
hey +brentmac I just picked one up from my local vacuum repair company. I took the old one with me and they matched it up with a used one in great shape.
@patriciaparis2911
@patriciaparis2911 6 лет назад
I got mine through Amazon. It is made in China and I think so is the vacumn cleaner.
@jerry55621
@jerry55621 7 лет назад
Call sharks customer support you have a 5 year warranty on that vacuum. They will send you a new hose with no questions asked. Don't take it have them send you a new hose! Trust me they will send you a new one! They have great customer service.
@ClintMoar
@ClintMoar 7 лет назад
Mine was so old, never even thought of that...thanks +jerry55621.
@freeasabird5187
@freeasabird5187 6 лет назад
Where would you find their customer service number?
@alliegator187
@alliegator187 10 месяцев назад
Yeah that stupid handle. Pinching my hands. I can't remove that grey ring.
@ClintMoar
@ClintMoar 10 месяцев назад
I know right?. Hope the video helped a bit.
@alliegator187
@alliegator187 10 месяцев назад
@ClintMoar turns out my model was slightly different because the inside of our hose handles were different. Long story short and sore hands later, I just order the whole handle and hose on Amazon for under $30. 😄 Apparently Shark doesn't want us replacing the hoses.
@susanhenry6834
@susanhenry6834 4 года назад
Yeah, don't buy! Hoses split after 10 uses. Shark isn't what it used to be!
@ClintMoar
@ClintMoar 4 года назад
Hmm. Was it the same model? Our 1st one lasted many years and our 2nd one is exactly the same quality and we're into year 2 with no problems.
@susanhenry6834
@susanhenry6834 4 года назад
@@ClintMoar I would have to go look at it but I believe so. I have had to duct tape mine for a few years. I bought it 5 years ago. I do however want to thank you because I did fix it with your help. Felt good to do it all by myself...with a bit of help from you! :) it sucks again like it did when brand new. I was about to throw it out. Took longer to unduct tape it than fix it.
@susanhenry6834
@susanhenry6834 4 года назад
@@ClintMoar just looked and yes, shark navagator.
@ClintMoar
@ClintMoar 4 года назад
@@susanhenry6834 your welcome. Thanks for sharing.
Далее
Why Can't You Repair Your Shark Vacuum?
8:27
Просмотров 360 тыс.
拉了好大一坨#斗罗大陆#唐三小舞#小丑
00:11
А ВЫ УМЕЕТЕ ПЛАВАТЬ?? #shorts
00:21
Просмотров 880 тыс.
Quick Repair a Vacuum Hose NO TAPE
2:39
Просмотров 496 тыс.
Shark Vacuum Loss Of suction Fix
11:57
Просмотров 169 тыс.
Fixing My Shark Navigator Lift Away NV352 Hose
5:50
Просмотров 72 тыс.
Shark Rocket Vacuum Cleaner Lower Hose Replacement
11:05
Shark Hose Repair
14:21
Просмотров 9 тыс.
Fixing the Shark Navigator Vacuum
8:16
Просмотров 132 тыс.
Shark Navigator Vacuum Hose Repair
8:57
Просмотров 14 тыс.
拉了好大一坨#斗罗大陆#唐三小舞#小丑
00:11