Simple Trick to add to Bobber and Jig Crappie Rig

Подписаться 63 тыс.

Просмотров 335 тыс.

50% 1

Ever have the problem of a slip bobber not sliding up or down the line? Ever have the bobber get stuck in the knot you tied? This simple trick will make sure your jig or minnow falls to the depth you set the bobber stop at everytime.
-FC
#Bobber #Fishing #Crappie
MY SETUP
8ft ACC Rod - AccCrappieStix.com
Piscifun Viper X Reel - amzn.to/2VgWnvR
3/4" RodnBobbs Bobber - bit.ly/3kie5cR
6lb monofilament line
1/8oz. jig - AccCrappieStix.com
Crappie Monster Uppercut Black/Chart- CrappieMonster.com use code DAVIS for 20% off
My Fish Finder Setup
Main Unit - Garmin Echomap 93sv UHD - bit.ly/3uJMoih
Mapping unit - Humminbird Helix 9 SI - bit.ly/3rM1OAZ
Bow Mapping Unit - Garmin Echomap 93sv UHD - bit.ly/3uJMoih
Livescope Unit - Garmin GPSMAP 1022 - bit.ly/3sDDro4
Livescope System - bit.ly/3Jms9LF
Davis Lenzen
P.O Box 42
808 Heggen St
Hudson, WI 54016
EMAIL FOR BUSINESS INQUIRIES: floppingcrappie1@gmail.com
Follow me on these SWEET Social Media apps!!
INSTAGRAM------------------------------ bit.ly/2BOA45W
FACEBOOK ------------------------------- bit.ly/2BOAXeM
TWITTER --------------------------------bit.ly/2C7hDoA
Fishing Gear*
Spinning Rods ---------------------------- ACC Crappie Stix ://bit.ly/2KyswnV
Casting Rod----------------------------------amzn.to/3got94G
Favorite Reel ------------------------------- amzn.to/36TBudI
Casting Reel---------------------------------amzn.to/33Va7hs
Tackle BackPack -------------------------amzn.to/37Khvxg
Light Rain Gear-----------------------------amzn.to/3qCCXgc
Cold Rain Gear------------------------------amzn.to/2K0B4Jq
Ice Fishing Suit-----------------------------amzn.to/3mZbKSz
Boat Equipment*
Livescope system------------------------bit.ly/3Jms9LF
Bow Sonar-----------------------------------bit.ly/3sDDro4
Dash Sonar----------------------------------bit.ly/3sDDro4
Trolling Motor------------------------------bit.ly/2IGzbBh
Camera Gear*
Drone------------------------------------------amzn.to/2K3Kzrr
Big Camera---------------------------------amzn.to/39Rwxnr
Gopro-----------------------------------------amzn.to/36UPBPH
LAV Mic-------------------------------------amzn.to/3mZyphH
Cheap Gopro------------------------------amzn.to/36XoJia
Lens------------------------------------------amzn.to/3lUADxp
Editing Software------------------------amzn.to/2VPnWJM
Big Camera Mic-------------------------amzn.to/3mZ7oLc
Small Tripod------------------------------amzn.to/2VUW4E1
Big Tripod----------------------------------amzn.to/3m07hOe
Wide Lens---------------------------------amzn.to/3gxQukI
*AMAZON AFFILIATE DISCLOSURE: Some of above links are Amazon Associate links in which I may earn a commission through the purchase of products using the above links*

Хобби

Опубликовано:

14 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 97

@thurgoodjenkins4311 Год назад

With this set up, I use 8 lbs. braid tied to a swivel with a 6lbs. leader. That way if you get snagged, you can pull it off and only lose your jig, instead of losing your bobber and bead.

@ARCSTREAMS Год назад

and the swivel stops the slip float from getting stuck to the jig at least i think it never gave me problems but if it does juts add a bead ontop of the swivel

@patrickgiroux7596 2 года назад

I have fond memories of Watts Bar Lake. I will go back. Soon.

@FloppingCrappie 2 года назад

It's a great fishery

@larryking606 2 года назад

Great Tip , I love waiting for the THUMP !!!

@fashopimpin Год назад

My god that’s the easiest way to tie a loop knot thanks!!!!!

@evelynlckes9434 Год назад

You are a genius I've been doing that for over 40 years and that not will not come loose if you wet it before you when you pull it tight

@fishmohr 2 года назад

Great video. I bobber fish a lot for walleye and crappie. One trick I was taught with a slide your bobber on the line followed by a bead. Then tie the line to a swivel. If you are fishing deeper, say 12 feet over 20 feet, add a slip sinker above the bead. Tie main line to swivel. If you are using 8lb mono, tie a 6lb leader (say 12-14 inches) and then your jib or hook. This keeps everything from getting caught up. If you get hung up on a branch, rock or other, you can break of the jig/live bait hook (6lb leader), without losing your bobber. I like your video with subscribe! Fishmohr

@mikeyfightfan 2 года назад

Excellent teaching for us newbies. Thank you.

@donaldnaymon3270 Год назад

Great video. Thank you for sharing details of slip bobber.

@buckeye37bjh Год назад

Thank you for comparing the side imaging, down imaging, and the 2d. The contrast between the 3 really stands out to me! Awesome video!

@jessimoore5831 2 года назад

Awsome job ! Thanks for sharing didn't know you could use that presentation year round like that ! I usually just catch crappie in the spring cause I could not find them in the summer so I just catfished or went for bluegills .I can't wait to give this a try ! To open my options up for better success crappie fishing !

@sammyvh11 2 года назад

Need more C and R for Crappie

@CrappieMonster 2 года назад

One of my favorite ways to fish!

@timmoore9736 Месяц назад

Fun watching - your 9 inch fish would be large where I fish for crappie in Oregon - but they they are a hoot!

@scotthummel4248 2 года назад

Thanks for showing this!

@candymenard3657 2 года назад

Awesome video. I like how you go through things and teach us different techniques. One thing I would like to see is just one video how to do your knots. That way we can go to the one video and learn how to do them the correct way. Thanks

@michaelhenry550 2 года назад

I'm working the jig set up now. Hoping it will help. Very slow hitting in mid Georgia.

@sunleonardo5946 Год назад

Very cool set up. On the bank, I use a blastoff bobber from RnB to deliver a light jig to distance. Cannot detect negative bits tho.

@j.j.clingman4083 2 года назад

Awesome video buddy and a very good tip also!! My problem is just finding where the crappies are on a lake and then trying to get them to bite because they are so pressured fish!!! If I can get past those two things I will definitely be much happier!!!

@TrueNorthOutdoorAdventures 2 года назад

You seem to know what yer doin! Nice video man. New subscribe from Indiana

@richardgrady2232 2 года назад

Great job

@donniemccorkle8671 2 года назад

Very good tip, I enjoy your videos

@FloppingCrappie 2 года назад

Thanks, glad the video was helpful

@charlesronk2989 2 года назад

I just bought that same reel. Love it. I did that same tip as I was having the same problem but it was where I had tied a leader of floro onto my braid. The bobber kept hanging. So I used the same trick.

@FloppingCrappie 2 года назад

Awesome! I'm really liking the viper x reel!

@lifeoutdoors2day357 2 года назад

I tie the loop much smaller then that, so there is still some spring in the line. Better action fewer issues. Give it a try sometime

@mitchhelms6772 2 года назад

great tip but if you do the same tie method except hook the loop over the eye you can make the loop a little bit smaller but if that works best for you great i just don't like the big loop as much

@warcraft8226 Год назад

thanks

@CzarWilkins Год назад

Wow never saw that kind of fishing, using a jig with a float. Interesting!

@bjohnson6108 2 года назад

Some of the best instructional videos out there. Thanks.

@FloppingCrappie 2 года назад

Thanks, I appreciate it!

@mjcavender1230 2 года назад

I’m just now learning to “really” fish. One thing that wasn’t clear to me or either I didn’t comprehend. So I am clear…The first knot you tied is roughly 15ft or so up your line from your jig, which stops the bobber and helps maintain depth of the jig at roughly 15ft down? The bobber will slide up the line and stop at this point and then slide down towards the jig as you reel it in. I will need to learn to tie a knot for the bobber stop as I have not a clue what that cannister tube knot you used is. I looked below in your description but wasn’t sure. Great video! Thank you for taking the time to put it together.

@FloppingCrappie 2 года назад

You are correct. The top knot sets the depth, which the bobber will stop at. This is a video where I explain how to tie that knot. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cDIsCsIl0XY.html

@mjcavender1230 2 года назад

@@FloppingCrappie greatly appreciate the reply and how to tie the knot. 👍🏻👍🏻

@jldfishing6622 Год назад

Yeah I like using the rubber bobber stops I keep it from hitting the knot

@gregstabryla9945 2 года назад

Gonna try that loop knot. No bead on top of the bobber? Another bobber stop I've been using is a piece of skirt from a frog, chatterbait, etc. The yarn slips too much for me, but never thought about leaving tag ends on it. Those micro guides can get picky.

@FloppingCrappie 2 года назад

I'll have to try the skirt from a frog next time I'm fishing. And yes, you can put a bead above the bobber and below the stop if the bobber is getting stuck in the slip stop.

@thebowtiefisherman5718 2 года назад

Another great video. Hey I'm in need of a good fish finder, I currently have the Lowrance hook2 4x gps. It's absolutely not working for me. Can you please recommend a unit that shows brush piles and structure that won't break the bank? Thank you

@FloppingCrappie 2 года назад

I would recommend the humminbird helix 5 si GPS amzn.to/2Whjua5

@chambourtram 2 года назад

Great tip. Question, are you basing the depth to set the stop off purely the depth of water or are you looking for a certain depth off the top of the brush pile?

@FloppingCrappie 2 года назад

I was using where the majority of fish were suspended above the brush pile. Most of fish were 10-15ft down in 20ft of water. The brush piles are roughly 4-5ft tall .

@adventureswithfrodo2721 2 года назад

Tried the Rod n Bob and they are good but they seem more fragile then the Trill bobbers.

@illinoishotspotsguideservi4262 2 года назад

There is a new 1 of a kind rod coming out soon designed just for the slip bobber guys. Doesn't matter what style of bobber stop you use it will not hang up in the eyelets. Hotspots MEGAEYE crappie rods. Keep your ears open for availability.

@dennisdiekman5233 2 года назад

You ever fish in Iowa I fish a river and catch a 100 crappie every time I go out but the biggest one's I get are 12 inches

@FloppingCrappie 2 года назад

I have not fished in Iowa, maybe someday

@adventureswithfrodo2721 2 года назад

You know what they say about fisherman.

@jackieakersjr2691 Год назад

What storage you get your slip bobber strong

@slabslayer258 2 года назад

Mine slip occasionally nothing is perfect when reeling in fish mainly just usually flip my rod as bobber stop comes close and let it slack just a second to travel intro guides and it works great majority of time I’ve been slip cork fishing for my entire life still meet people that don’t know what it is

@ARCSTREAMS Год назад

i make my own bob n rod or dual function fixed/slip bobber from any float i buy on the market, have a vid on my ch for the diy on this and other neat hacks

@scottgarrett6339 2 года назад

What model of trolling motor are you running? I have to get one with spot lock but not sure what to go with. Thanks for info in advance

@FloppingCrappie 2 года назад

I have the Garmin Force trolling motor ($3000). The least expensive option for trolling motor with spotlock is the minnkota terrova ($1300)

@biggank20 2 года назад

“Another one “. - DJ Khalid

@aleckrug1554 2 года назад

Try making your loop in your knot as tiny as possible. Like a 1/8 in gap

@adventureswithfrodo2721 2 года назад

The only issue an you omit this is you need to use seed beads. If not the bead will slip over the knot.

@leefisher5155 2 года назад

I am a great crappie fisherman and do want to get in crappie tournaments I have a old ugly boat but I catch a lot of crappie how do I get in those crappy tournaments I know I'll be a underdog but that's okay

@SQLKC Год назад

My issue is using the yarn ties it I can't cast using it cause it stops the line and gets hung on the spool

@shawneastman9210 2 года назад

Where can I get that big eyed jig I have a bunch for my walleye jigs but haven’t seen them that small

@FloppingCrappie 2 года назад

Acccrappiestix.com

@cowboysnation1 2 года назад

Re tie it??? Or re tighten it??

@Abears_ 2 года назад

I just started fishing again about a week ago and before that I was a teenager last time I wash fishing so this might be a dumb question but how come no one uses swivels anymore?

@FloppingCrappie 2 года назад

A swivel work also instead of a bead.

@Joe-un4jk 2 года назад

I use swivels a lot.

@chrishodskins7482 2 года назад

Where do you get your jig heads?

@FloppingCrappie 2 года назад

Acccrappiestix.com

@CarlosMartinez-xs8fs 2 года назад

What rod and reel do you recommend

@FloppingCrappie 2 года назад

For a bobber setup, I normally use an 8ft ACC rod with a 2000 size piscifun viper x reel.

@decision-maker1738 2 года назад

👍👍👍👏👏👏👏👏

@alkinceratfafterthefly6284 27 дней назад

If you crank the yarn bobber stop down with pliers it won't do that. Never had a problem with that

@charlieelder7602 Год назад

WHERE DO YOU GET YOUR CRAPPIE JIGS FROM

@FloppingCrappie Год назад

Jigheads are from acccrappiestix.com and the plastic is from OTHFISHING.COM. 20% off code DAVIS

@jmrose60 2 года назад

What size bobber do you use?

@FloppingCrappie 2 года назад

3/4 inch

@ronknight6400 2 года назад

@@FloppingCrappie I just ordered the 1/2" before seeing this response because in another video of yours, you were using the 1/2" size. What determines if you are using 1/2 or 3/4"?

@FloppingCrappie 2 года назад

@@ronknight6400 it depends in the size of weight/jig that I'm using

@sowabunga 2 года назад

@@FloppingCrappie So what size jig for the 1/2”? And for the 3/4”? Thanks

@FloppingCrappie 2 года назад

@@sowabunga typically I use the 3/4" for 1/16oz jigs. For 1/8oz. I use the 1"

@marcusfuller7464 2 года назад

A small split shot will do the same but doesn't slip as much

@FloppingCrappie 2 года назад

That would work, thanks for watching!

@BlackCobra331 2 года назад

Way more annoying than a slip knot

@razorbak6783 2 года назад

I'm new this forward facing sonars and I'm trying to do my research because I'm getting ready to take the plunge and from what I have gathered the current system is going to run me around 2,500.00. Please correct me if I'm wrong but from what I understand I need a 1. graph 2 transducer 3. black box....does that pretty much cover it...those 3 items? and can anyone tell me what is the best one to get? largest screen I can get with that 2,500.00 budget and also If I decide to get 2 graphs and put one at the console can I get the same 2 graphs and network them with a ethernet cable. Any advise or help with this would be so much appreciated. Like I said I'm learning about these at the moment and trying to get the best deal for the money. Also...if anyone know of a company running a sale or a coupon/rebate on these would be great too.

@FloppingCrappie 2 года назад

You are correct in what you need for this system. There a couple of bundle sales going on that are within you're $2,500 price range. The first is a Garmin 93sv bundle which includes the black box and the LVS32 transducer bit.ly/3knsbsq . Another option is the GPSMAP 1022 with blackbox and LVS32 transducer bit.ly/3MIrV34 . Garmin just came out with the LVS34 transducer as well, which replace the lvs32 and can be bundled with either of these graphs and same black box for $200 more.

@razorbak6783 2 года назад

@@FloppingCrappie That is awesome....thank you so much....if I go thru one of these links does it give you a kickback for the purchase? I know some channels have affiliate links that kicks back to you guys.

@FloppingCrappie 2 года назад

@@razorbak6783 yes, I do receive a small commission

@razorbak6783 2 года назад

@@FloppingCrappie When I decide to get it then I will definitely get it thru your links ;-)

@bradleyrussell1973 2 года назад

For starters, a spring float is NOT designed as a slip bobber. It’s meant to be adjustable without a wrap, then when you get the depth where you want it, you wrap it once. 4 out of 10

@FloppingCrappie 2 года назад

Clearly you didn't watch the video, this bobber is a 3 in One design. It has two notches. The notch closest to the body of the bobber is for a fixed float setup. The second notch closest to the stem is meant for a slip bobber setup. You can also run the line through the middle of the stem , which is why this bobber is called a 3 in One.

@Red_White_Blue_First_USA 4 дня назад

It would not slip if you put line glue

@wadesadberry880 3 месяца назад

Bend your hook out a little and stop missing them!

@alkinceratfafterthefly6284 27 дней назад

Don't use a bobber with a spring. I've never had that problem

@Mr4twitch 2 года назад

Do you know what a slip float is? Because you're not using slip floats.🤣🤣🤣

@FloppingCrappie 2 года назад

This is a 3 in one bobber. There are two notches on the stem of the bobber, one is for a fixed line position, the other allows the line to pass through it. It also has a hole through the middle of the bobber. You can either run the line through the middle of the bobber or use the second notch on the bobbers stem to use it as a slip float.

@Mr4twitch 2 года назад

@@FloppingCrappie just use a slip float so your line doesn't get caught up on the spring

@wg8847 2 года назад

Why such a long loop knot? Makes no sense to do that.

@walterfard1161 18 дней назад

i honestly dont get why people release fish especially crappie and bass they're such good eating fish

@beverleygregory Год назад

to much info to quick confusing knots , better to see the set up on a black cloth a slow detailed presentation rather than see you fishing on the lake