SKETCHY Ebay Turbo Single Cam EG Hatch Civic Made WAYY To Much Power! 

Every time I get my car tuned, I always supply new plugs. And I always make sure my vehicle has no issue. Turners are there to tune your car, not fix and work on it. This is why Hunter gets a subscription from me.

That is crazy that someone would drop that off for a tune when it is in no way shape or form ready for a tune lol.

this is how it always goes. Nobody is EVER for real ready for a tune. Always something that needs figured out before we can rip.

This car wasn’t even ready to be started let alone tuned.

Good to see somebody who doesn't mind working on a car that's not top notch! Although, even I gotta admit, that car wasn't quite ready for a dyno yet lol. My brother and I recently took his little Kia Spectra 1.8L to the only dyno shop in town, because we wanted to get some baseline numbers for the NA motor before adding a turbo, and to make sure we had the timing dialed in pretty well. It is mostly all stock with just a hand ported head, and we swapped out the factory ECU with a Speeduino DIY ECU, and I'm doing all the tuning myself (I have some self taught tuning knowledge from a few years back). The dyno shop was giving us crap because it was a "bone stock slow cheap kia" and was just rude in general about everything. We didn't even need them to do any of the tuning, I was doing all that myself, they just had to click the dyno button to start/stop runs! Long story short, the fuel and timing were pretty much bang on, only needing some small fine tuning, and now we're in the process of turboing it.

You can teach a good lesson with ether a good or bad example. This is great so people will see how silly they look doing even a few of these mistakes on their builds. This one is just crazy tho 😂

That drain line is a beaut... kinked in half with the fitting half installed 🤣

That d15 is not long for this world 😂😂

I will admit bro u always like to get peoples shit to tip top with what u got u go above & beyond to look out 4 ur custies most people dnt have the time thats why people fuxx with u hunter ur solid dude in the parts department lol jk if I didn't fuxx with u I wouldn't watch ur videos plus who in the fuxx dnt love Hondas & Turbo content...💪kswap the 🌍

First time watching your video it was very satisfying to see things get worked out one by one instead of just throwing your hands up. Made a fan out of me.

I've been watching your videos for awhile, paired with a lot of other honda youtubers it has made me want to learn to tune a little bit. You've always provided lots of helpful tips and how-tos. I went looking in my tune from when it was dyno'd and i'm impressed it's stayed together 😂 On the limiter where it lives, the guy has 24.5deg of timing at 12psi on pump gas. Stock b16 engine hahah. Gonna need to fix that up. Thanks for your contributions to youtube and the community! Even when it gets overwhelming it doesn't go unnoticed.

This needs way more views. Good stuff, man!

Yooo Trevor, you make my day with your loudest burp ever i’m telling you you gonna become famous. I love your videos guys. Keep up the great work with the Contant of Hondas..

Dude I love these videos. Trevor is also a pretty good value add. Kids living his best life

Man, I havent been able to watch in a while due to work, but I'm pumped to see Hunter still at work on these old girls!

Man I thought my ek was rough lol satisfying to watch you finger it all out. Do you do any remote tuning by chance? Trying to tune mine myself but having issues with boost tables. Regardless, keep up with the work man. Love all the videos!

Love the single cam content

Awesome video!! Keep pushing!!

I thought my civic was a little jank but damn makes me feel better!

Good job explaining some issues encountered but ending nicely with solid soch power. Nice video. Do you think 310cc injectors would be enough 8psi on that engine?

love the new shop tree in background is AMAZING KEEP UP THE HONDA VODS

Thanks for the videos love watching your channel

Hunter you are a very patient and competent professional. Because Gawd Damn this build is a shitshow. Good on you my dude

Wow nice results!!!

Oh man i was laffin. All those elementary mistakes with the wastegate, fuel pressure regulator etc. The person who assembled this needs to stop working on cars.

Well done! I agree "nobody would have touch that"! lol

You look like a really cool guy. I like your videos. The only thing I question is why didn't fixed the oil return line instead of letting their car smoke But I understand you're trying to help the guy out that's very kind of you

Autozone should always have BKR7E plugs in stock. They hold huge stocks of NGKs usually

Ya just tell him straight up honestly, its a really good idea to pull the head and drop the pan and put vitaras and rods in that thing asap because of course we all know its not going to last long.

great job guys

awesome, thanks guys

“Yea, just needs a tune”

With the Huntertuned 1000cc injectors running on Neptune RTP and a demon 2 my CRX would not run for shit. Tuned a chip with HTS slapped it in ran great. Bought a p72 with an s300 V2 car runs Great after some trial and error with the basement. And fixing my shitty injector wiring.

Always great content! What's your opinion on removing b16a2 oil suirters with aftermarket wiseco pistons? I have one nozzle broken and can't find one anywhere so picked up golden eagle set of plugs.

I thought you had an ostrich2, are you not using that and a datalogger when tuning these chipped cars? do you have a Moates Hulog? We have a replacement for Moates Hardware, External install emulator (for temp installs for tuning) in development, and we currently have a hulog replacement (boostednw H-Log USB Datalogger) as well as Bluetooth datalogging

your very nice to work on this rolling fuel leak. I would of sent it back to sender

call the part stores before you go!! Ask them if it’s in stock and then ask them to verify that they have it saved me so much time

I wish I had someone near me outside Philadelphia, Been trying to tune my own car and or looking for people that can chip tune for me or do a remote tune. I also have been noticing on my 6th gen Accord coupe that HTS tunes, dont work as well as CROME did for my first base map

If I do a standalone, possible to have two maps one for performance on 93/e85 then one eco on 87?

hey hunter tune do you tune Mitsubishi 2.4l engines and there computers bro

looking good with the shorter beard and things. keep the content coming

I have hatch with the same engine and i dont wanna k swap it cause i got another one that ima k swap but i just wanna experiment with the d15b7 and with this vid i think is worth it with a good proper set up

i wanna build a single cam again

Do companies build h beam rods for the b7 engine

Can I use a base map about to boost my b18 b stock just gona toss like 10 pounds at it

I have a similar set up and those numbers is what I really need. I’m good with that !!

Nightmare. Have any recommendations for machine shops for D series in the MN & WI area?

Isn't it so satisfying to fix something that's broke??

My goal is to have you tune my 00 civic d16y8 Vitara build I'm going to do my best to make it a strap and tune lol

Love these videos the most. I'm still trying to figure out retarding 1 degree per pound of boost. I need this explained to me in layman's terms. So, if running 10 lbs of boost, once boost comes in on ignition map, one would start at 10 degrees and reduce 1 degree per lb of boost as boost increases?

Damn! Thise injectors looked like they got installed by Ezal from the movie friday lol

D15 torque baby! 😊😂

Holy crap that’s a ghetto hook up! Wires everywhere!

Minnesota or Wisconsin?

You ever mess with the DOHC D16?

What the he'll kind of turbo oil drain is that that thing is working against gravity got more twists and hills than a roller coaster

you worked miracles on that garbage

U need to send a sticker with your injectors etc ,so we can represent u 😎

Didn't know these tired ol' 1.5 motors can still pump out this much horsepower...... out of an eBay turbo no less.

A SCOSH OF FUEL⛽️ DONTCHA KNOW!!!

240 for a pos sohc. your a beaster hunter

208th from the UK.

👑H⏱NDA CIVIC HATCH EG👑

Autolites ?

Can you recommend a good chip burner?

Man that’s a classic Honda shit box. Once I saw the injector wiring I knew this was gonna be interesting.

With some rods would this make a lot more power?

Hahaha 😂 did you see how much of a gap on his old spark plug 😅😅😅😅😅

Sheeessshhh

hi , he will bend his original connecting rods with just as much!

Holyyyy shit what a pipe of shit lmaooo. I’m sorry but I would never drop my car off like this💀💀

It smoked every time on a pull

Jesus what a junkyard car. And the wiring :,)

makes for good content doe😂

That's gotta be smokeys (from friday)new car that he got cux it did not wanna turn off after hunter shut it down lol smh

What a shit box lol 😂 no wonder it came in the shop like that the owner literally has no clue what they are doing 😂 good thing you do.

yeeee

Diaphragm was probably smoked on the fuel regulator

Mannnn the fuel injector harness is insane lmao throw it out

What were they really expecting to get done on that car.

Stock block d15

sir I have tried to reach out to you via email on your website regarding turboing a B20 in a 5sp crv. I also tried calling the contact number on the site. Is there different contact info? Vernon

2:50 WTF. :O 3:53 WTF :O 5:18 WTF :O 19:55 FFS :O.... Maybe the AFR sensor is reading correctly? There is a lot of smoke in the exhaust from the oil.

Jdm volk rim 15in

JFC.... The janky shit people do to these cars and then drive around on the street. 🤦🏻‍♂️🤡😂

bro if i dropped my car off to a shop to have my ecu chipped and they called me the next day telling me to find a ecu i swear to god im coming to pick up my car

People really drop cars that dont even run for a tune

Yeah this kid better kiss your ass after this! You look up hack in the dictionary & this was on the second page! I know kids are kids, but a lot of this was just easy common sense stuff! Like get the right coupler, when you said fernco I was dying, I’m a Master Plumber….😂 But seriously, those injector plugs are cheap enough & easy to wire, he had them wires dangling…🤦🏻‍♂️ He’s lucky to of had you fix all that shit for real, great job…✌🏻💯🏁

How does all this junk end up with you?

Mannnnn they don’t believe in electrical tape either at least 😢

suprised you took that car in most tuners wouldve been like na fix everything before bringing it in.

That l scooter was a little zipper man

What in the backwoods of Kentucky kind of hack job of injector wiring is going on 🤣 man those cheap fuel pressure regulators are a joke

I’m sorry to say this but I know it’s money coming into the shop , but damn it man sometimes you gotta say no ,

Why are most hondas put together like this?

Why do some people actually try and run/tune/drive a D15 anything? Never understood that. The heart of the build should be something of anything. Just why?????

Integra gsr ls v

What a hack job turbo build. Jeezus.

Whoever "built" this car should be ashamed of themselves.

First??