Learn how to install a new 12V battery in a Subaru Legacy. We’ll show you how to replace/change/remove with simple tips and tricks to help get you started!
Tool List: 10mm wrench (deep well socket is helpful)
Click this link to determine which battery your vehicle needs: www.autobatteries.com/homepage
This video shows a 2016 Subaru Legacy. The video can also provide guidance on model years: 2010 - 2019
The battery group size 25 is used for all model years.
We highly recommend upgrading to an AGM (as seen in our video and available at www.optimabatteries.com/) for better performance and longer life. You can learn more about AGM here: autobatteries.com/battery-tec...
The use of a memory saving procedure can keep the memory alive on the vehicle's computer during the battery replacement procedure. If you want to learn more about memory saving, referring to our video here. • Vehicle Memory Saving ...
Although this video may provide you with the basic procedures for replacing your battery, we recommend that you check with the vehicle manufacture's step by step procedures found in service/repair manuals for the vehicle you are working on.
Some late model vehicles must have the 12 volt battery registered with the vehicle's Battery Control Module or Computer after replacement. See these videos on Battery registration and coding for more details on the procedures at • Battery Registration w... & • Battery Registration &...
Always wear safety glasses and gloves when working with or near batteries.
Intro: (0:00)
Getting Started: (0:13)
Memory Saver: (0:42)
Remove Negative Cable: (0:49)
Remove Positive Cable: (1:08)
Cleaning Off Corrosion: (1:25)
Remove Hold Down Bracket: (2:17)
Remove Old Battery: (3:13)
Install New Battery: (3:21)
Reinstall Hold Down Bracket: (3:41)
Reinstall Positive Cable: (4:32)
Reinstall Negative Cable: (5:38)
Apply Terminal Grease: (5:53)
Outro: (6:21)
Subscribe!: (6:30)
24 июл 2024