SUPER EASY REPLACEMENT OF PLASTIC WATER VALVE ON COPPER PIPE!

Подписаться 90 тыс.

Просмотров 60 тыс.

50% 1

SUPER EASY REPLACEMENT OF PLASTIC WATER VALVE ON COPPER PIPE! This flowtite valve removal will be an easy plumbing job for a diy plumbing person. The fixes are for all levels of experience. bad plumbing parts. Subscribe here :ru-vid.com...
Ridgid ratcheting copper cutter link: amzn.to/2WjeX3K
Ridgid Close Tubing Cutter link: amzn.to/3F8wVLU
Stanley Folding Utility Knife link: amzn.to/3BQUkhW
Mega Lock Thread Sealant link: amzn.to/3bwsRVK
1/2 FIP x 3/8 Anglestop link: amzn.to/39upJy3
1/2 x 3/8 Sharkbite Anglestop link: amzn.to/3ONFErl
Teflon tape link: amzn.to/2Jo9hik
Dewalt Adjustable Jaw Wrench Set link: amzn.to/2yhrQmj
Channellock Diagonal cutter pliers link: amzn.to/3mVBfpI
Bernzomatic Plumbing Torch Kit link: amzn.to/3OifkoY
Wire Brush 4-1 link: amzn.to/3jMEVIC
Open Mesh Sanding Cloth link: amzn.to/3vmvt4i
Benzomatic torch head link: amzn.to/2X7BGRu
Plumbing solder link: amzn.to/2AioK2c
Mapp Gas link: amzn.to/2TMJB4V
Soldering flux: amzn.to/2M2NLkR
Fitting Brush link: amzn.to/2zFg5qD
Jersey Gloves link: amzn.to/2M7VXQA
Inspection mirror link: amzn.to/3dclbZY
1/2 FIP x 3/8 comp Anglestop valve link: amzn.to/3KjV2ZC
Buy Copper Fittings and Pipe Local…SAVE $$$
(Amazon Affiliate link)
Did Our Video Help you? Please Consider Helping Out the Channel
www.paypal.com/donate/?cmd=_s...
Check us out on Facebook: / ufix247
We love helping people and hope that we are doing that!
Guitar Clip by Audionautix is licensed under a Creative Commons Attribution license
(creativecommons.org/licenses/...)
Artist: audionautix.com/

Развлечения

Опубликовано:

17 июн 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 77

@jgardner4033 2 года назад

Thank you for another great video. You gave 3 different repairs. The compression fix looks right up my alley.

@ThatFixItGuy 2 года назад

The compression repair is a solid choice for a repair. I use these all the time. Thank you for watching.

@garykrell2058 Год назад

We had to solder on stops in my early days until the compression ones came out now that's all I use. The one you took off Frisco tx had so much city pressure it would shut them off back when these came out lol

@bigallis1 Год назад

Great video Brian. Thank's for doing it. I just ordered one of the Rigid pipe cutters. Getting ready to replace my Accor/flowtite valves. They are 10 years old.

@chifan7 7 месяцев назад

Thank you so much for a Really easy to follow video. I moved in to this 15 year old patio home and needed to change the water tank pump. I had never seen this type of push pull valve before. It looks Cheap. I am considering changing the two bathroom valves to the ones you mentioned here. I think even I... could do this. Thanks again.

@tonya3308 8 месяцев назад

I had a plumber quote me $750 to replace two of these plastic valves. I did one with a Shark Bite and removed it with the pipe cutter as shown. New valve was about $15 and it took ten minutes to cut the old one off. Great demo!

@katiegullick1779 Год назад

Saved me a lot of money , thank you for your time!

@reedallidap7173 6 месяцев назад

Took me forever to get through with cutting wrench. Man you made it look easy!!

@marsranch6722 2 года назад

Thank you for an other great informative video. I love watching your videos and I am learning lots of good ways fixing plumbing around the house

@ThatFixItGuy 2 года назад

Your very welcome. So glad you are enjoying the channel. Thanks for watching.

@thewhiteserpent4900 Год назад

I been plumbing for 8 years now doing service in high rise condos in Toronto. Tried this trick out over the weekend, worked perfectly. Didn’t have to cut drywall either. Thank you sir. You are a stud.

@reedallidap7173 6 месяцев назад

Which one of the 3 did you try?

@larrymonte9869 6 месяцев назад

Thank you for a great video, it addresses my exact issue. You saved me about $300.00. Thanks again.

@brittblanton8342 2 года назад

Hey Brian thanks for the great information, I am personally a fan of the compression fitting. Hope you and the family have a great weekend 👍🇺🇸

@ThatFixItGuy 2 года назад

Thank you Britt! Happy Fsthers day! I really like compression as well. Very user friendly. Hope you are haven’t a great weekend.

@mv-db4463 Год назад

Why only 192 LIKES when this is one of the best valve removal/ replacement videos I've seen in years?

@keithkerns8770 Год назад

Excellent video.

@stevesproul3744 2 года назад

Great video with some great tips brother. Hope you have a awesome Father’s Day weekend

@ThatFixItGuy 2 года назад

Happy Fathers to you as well Steve. So far so good.

@richardthomas1743 2 года назад

Awesome demonstration Brian and thanks for the tip of using a mirror to inspect the solder on the rear of the connection. Great job with the outro Logan !

@ThatFixItGuy 2 года назад

Your welcome Richard. I told Logan You said good job as well. Always nice to inspect the connection. Hope you have a great weekend.

@stemmentor9700 Год назад

@@ThatFixItGuy Agree, i don’t see many do this (my dad taught us years ago as a kid). always nice to get a cheap mirror with telescopic handle i just happened to find one that had a small light which was neat (flea market booth) 5$. glad ya take pride in work.

@onenikkione Год назад

The threaded fitting is the Best (for future repairs!!!)

@tombirmingham7354 Год назад

Thanks!!!

@hongdo9098 9 месяцев назад

Thank you Sir

@reedallidap7173 6 месяцев назад

Great video! Also, pipe dope…

@markheselden438 Год назад

Neat thank you

@richardallgood815 Год назад

I think the one on the escutcheon plate keeps you from pushing the pipe into the wall if it is not secured well

@MichaelVogel-lg7vr Год назад

Great video. Is there a reason this cutter wouldn’t work on cpvc instead of the handsaw in your other video?

@anthonymullings9429 Год назад

This was very helpful thank you I was able to take mine off and replace it thank heavens

@ThatFixItGuy Год назад

Awesome. So glad this helped you out. Please subscribe, share your experience and help us grow.

@anthonymullings9429 Год назад

@@ThatFixItGuy already did

@FernandoRodriguez-ds5ri 8 месяцев назад

New sub

@MichaelVogel-ls3ci Год назад

Great video. Is there a reason this cutting method wouldn’t work on a cpcv installation?

@jattilah Год назад

The jokers that did mine originally had it very flush against the wall, so no room to slide it back after cutting it off with the pipe cutter tool! I had to dig the pieces out! It would have gone a lot more smoothly if I would have been able to slide it back like you did. Still very helpful, though. Beats digging around under there with a hacksaw!

@ThatFixItGuy Год назад

So true. Once I found this I’m never going back to my old way.

@landhow10 Год назад

Hi, can you use the rigid ratcheting tool to remove the flowtite piece off of pvc pipe or can it only be used with copper pipe?

@chrisnaden Год назад

Would the flow-tight removal you demonstrated also work with plastic pipes?

@hinojosa552 Год назад

Where did you buy that heat shield?

@breastmasterz Год назад

Great video! Thank you! I still have these on my sinks and won’t to change them. Why are you not such a fan of the shark bite if you say they do work?

@tonya3308 8 месяцев назад

I have a new home and the copper pipe is connected to PEX tubing - would the heat from the solder damage the PEX?

@tkskagen 2 года назад

When are you going to visit "FARPOINT FARMS" again? Seeing the two of you together makes me smile, and the Content is always awesome!

@ThatFixItGuy 2 года назад

Dude I was I was closer to him we would do all kinds of stuff. I’m trying to talk him into going to the national hardware show or something. I think it would be a blast.

@bengarcia6898 11 месяцев назад

What’s the name of the copper fitting piece and size you soldered onto the copper coming out of the wall?

@brookmany2k Год назад

I just did this, great instructions. I wish I would have listened about the gloves, that little half moon on the ring will make you bleed. Thank you!

@ThatFixItGuy Год назад

So true. The blood will come. So glad this helped. Please subscribe, share your experience and help us grow.

@artmetcommerce4749 2 года назад

Good video, thanks. Do I have to turn the home's main water valve off and drain water before replacing these things? How should I do that, turn off the main and drain water from an outside spigot?

@ThatFixItGuy 2 года назад

Yes you want to turn the house water off for sure. These are going to be one of your lowest point of water so if you have anything lower like an out side spigot or fixtures in your basement then drain there. And you will probably still get a little water from here.

@artmetcommerce4749 2 года назад

@@ThatFixItGuy Thank you.

@fredericksweet 2 года назад

Still hit or miss with sharkbite. I have used them in a pinch. Go to is still compression. But got to remember don't over tighten them otherwise they will score into the copper. I am barely starting to embrace upinor over copper. And since copper cost 3 times what it did when I bought my current house guess what? I will be doing my remodel in pex A.

@ThatFixItGuy 2 года назад

Yeah I know. Copper is still king, but the price these days is crazy. Over tightening is a thing ran into a lot on compression fittings. Thank you for your comments as usual.

@brucestorey917 2 месяца назад

ALWAYS remove the stiffener insert from a SharkBite fitting when using it with copper tubing. ALWAYS!

@m.t.3109 Год назад

95/5 solder is perfect for copper potable water pipes. Last time I bought it $30 a pound.

@mehnlo Год назад

Can that compression valve work for cpvc pipe?

@ThatFixItGuy Год назад

they can and I have seen them. Not a big fan personally. I would just glue a male adapter on or use a sharkbite.

@chadleslie4314 Год назад

Twist off the old, grooves not a problem for compression with pipe dope.

@allnationsseer7561 Год назад

I will use the compression... TY Installed a reverse omosis water system and at the end the stupid push pull valve is now leaking.

@ThatFixItGuy Год назад

Your welcome. Yeha that is a bummer. You got this!

@davidmoss5186 2 года назад

Isn’t there a removal tool like the shark bite? Think it’s time to purchase a new narrow pipe cutter! Got about 20 of these stupid valves to replace

@ThatFixItGuy 2 года назад

They say you can twist them off. I’ve had mixed results doing that, so I started cutting them off. Then I found you can use a cutter like this. It will be a great headache saver.

@montanammah6468 Год назад

I did the compression fix everything went well but had to call a plumber because compression fitting was leaking turns out I did not tighten it enough $255 lesson

@jacksplumbingvideos7147 2 года назад

I have no idea why they make those valves and what problem they solve.

@ThatFixItGuy 2 года назад

Totally Agree Jack. Funny thing is I've had people try to make a case for how good they are.

@davidr2515 Год назад

I call them Fisher-price shutoffs. I hate them. All the issues with them aside, they just look like a child's toy.

@tkskagen 2 года назад

¼ Turn Valves are the way to go, and forget!

@ThatFixItGuy 2 года назад

Totally agree. Has made so much easier in tight spaces.

@johnbalogna803 2 года назад

if the original valve isn't leaking why replace it???

@ThatFixItGuy 2 года назад

Because of the damage it could cause. Ask any plumber and they will tell you if you care about your stuff get em gone. I’ve been to quite a few floods from these over the years.

@NSResponder Год назад

I don't trust push-on connectors. Once I'm going throught the hassle of ripping those lousy plastic valves off, I'm not going to roll the dice on having to fix another leak in a year.

@onenikkione Год назад

The flux is NOKORODE