Super Simple DIY 10,000v AC Supply!

Подписаться 823 тыс.

Просмотров 286 тыс.

50% 1

Buy an AC flyback here: amzn.to/3CrTNTC
Buy inverter here: amzn.to/2QckzL2
PLEASE USE HIGH VOLTAGE SAFETY at all times. Not knowing your safety can incur injury. Now, lets be honest. Every High Voltage scientist needs their power supply. You guys asked for it, so we're doing it! Today we'll show you an extremely simple build that outputs over 10,000 volts AC, from a non-rectified transformer, at a relatively safe current. These transformers, from ionic cleaners, are some of the few without internal diodes. Also - Cheers to Bogdan!
Plasma Channel on Patreon: / plasmachannel
Episode 1: • How To | FIRE BEND | W...
Episode 2: • How to WATER BEND | Us...
Episode 3: • Video
Episode 4: • WIRELESS POWER | HOW T...
Episode 5: • We've actually produce...
Episode 6: • DIY FIRE TORNADO with ...
Episode 7: • Video
Episode 8: • SAINT ELMO'S FIRE | Th...
Episode 9: • IONIC THRUST | A new h...
Episode 10: • Using Water As An Elec... (last episode, water insulator)
Plasma Channel YT: / plasmachannel
On Facebook: PlasmaChanne...
I am also a television actor! Follow me on IMDB
My IMDB: www.imdb.com/name/nm6578948/?r...
Do not attempt to repeat our demonstrations, without prior knowledge of electrical safety. We do not hold responsibility or liability for damage or injury incurred by copying our results.
Super Simple DIY 10,000v Supply! HOW TO HOW-TO

Наука

Опубликовано:

21 июн 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 857

@treasuretotrash2067 5 лет назад

0:30 electroboom is proud xD

@PlasmaChannel 5 лет назад

ahah I bet. That shock hurt!

@facundri 4 года назад

He just made the same video, and that’s why I’m here

@Texas_bikes66 3 года назад

I didn’t know u had a yt I’m jplayz all ways watching ur tiktoks

@treasuretotrash2067 3 года назад

@@Texas_bikes66 my tiktoks?

@PlasmaChannel 4 года назад

NOTE: THIS VIDEO IS REALLY OLD, AND AWKWARD. Please view my newer, higher quality content!

@starchief93 2 года назад

Still good though. I used it to prove someone I know wrong, which is quite a good thing >:)

@southernautodiy2643 3 года назад

I like the electroboom intro 😂

@anthonyvolkman2338 3 года назад

Yeeees!!

@shiningstaer 3 года назад

What? You sound like an idiot

@southernautodiy2643 3 года назад

@@shiningstaer i'm rubber and you're glue whatever you say bounces off of me and sticks to you

@wotblitzexe3885 3 года назад

@@shiningstaer go watch Pepa pig toxic kiddo

@thejoxter6315 3 года назад

@@shiningstaer you sound like a 5 year old which you probably are

@farewell_8450 7 лет назад

It's incredible how certain things that looks some times overcomplicated are actually as easy as plugging two wires together ... nice video as always ;)

@PlasmaChannel 7 лет назад

+North Thelittlefox I really appreciate the input. Yes, sometimes there are ways to circumvent a steep learning curve!

@user-in8bz3kd7d 2 года назад

@@PlasmaChannel Can you make electric boars? In our country, high-voltage electric cats can only play sneakily

@josephd7892 3 года назад

I found out YES you have a lot of videos on voltage multipliers. Watched and gave all of them a thumbs up. I built the AC Supply in this video today and it worked perfect the first time. Next weekend will be building a 16 stage multiplier. Thank you so much for your videos.

@PlasmaChannel 3 года назад

Wonderful! I love hearing that things worked.

@josephd7892 3 года назад

@@PlasmaChannel I think I figured it out. You ran 3 capacitors in series so 3 capacitors act as one. I was thinking you did something special to prevent a voltage sag at the output.

@joshmellon390 4 года назад

Thanks for my newest salvage rescue item lol. MOT's, refrigerator/AC compressors, flybacks, whatever; every time we build a project like this we keep e-waste out of landfills. I'm going to dig through your channel now haha

@Engineer_Anton Год назад

This man is actually serious and good with inventions I like his videos does give me an inspiration in life!

@viktorpettersson6899 6 лет назад

I love your videos so much. The effort, classy, instructions! You deserve so much more views

@PlasmaChannel 6 лет назад

Really appreciate that sentiment. Thank you for the support!

@chems 6 лет назад

3:38 its capacitively coupling to your thumb

@PlasmaChannel 6 лет назад

true, nice catch!

@keeg025 3 года назад

@@PlasmaChannel it hurts if you hold it on there for to long

@styrishrodrigues 4 года назад

Who's here after electroboom..😂😂

@farlesthan1479 4 года назад

Me lol

@Anuradhai4i 3 года назад

Ha ha ha me too

@christiancoding 3 года назад

@treasuretotrash2067 3 года назад

I saw this long before electroboom did xd

@leopoldofernandezjr4441 3 года назад

@DeepakDeepak-is9ro 5 лет назад

Sir I made it! and it's Working ! Thanks A Lot Sir After this I am your Big Fan !

@PlasmaChannel 5 лет назад

Excellent! im' happy to hear

@damonjackson5857 7 лет назад

Hi I just came from keystone science and I love this channel already! I have a suggestion that not many people on youtube have built, and that is making a homemade x-ray machine. All you need is the x-Ray tube and about 40 kilovolts

@PlasmaChannel 7 лет назад

Honored you enjoy us! As per the x-rays, I have put thought into doing so in the future. Great suggestion. I have over 80lbs of lead (will be doing a plasma-lead-melting video soon) that I can use to shield from x-rays. The trick is how to do it in a controlled fashion. Very tricky. I have the 40kv, no problem. But the tube may be a little more tricky to attain.

@mehmetinlaboratuvar7099 4 года назад

@@PlasmaChannel any vacuum tube can turn into an X-Ray tube if you apply ~10KV or more. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QuRdLf8UkJI.html

@jamesjanota985 6 лет назад

Thank you Jay for keeping it real!

@PlasmaChannel 6 лет назад

My pleasure! Thanks for the loyalty

@superswimgirl44 7 лет назад

Love the videos!

@gogo311 7 лет назад

So simple! I didn't know those ballasts put out high frequency! Also, can't believe you got that ionizer thing for 3$.

@PlasmaChannel 7 лет назад

+gogo311 the place I buy most my HV supplies from... Rhymes with hood will. Yes, it was 3 or 4 dollars!

@WildfoxFabrication 6 лет назад

amazing!!!

@siegec4239 Год назад

would love to see some more of these simple videos on making supplies and circuits

@nuclearhighpowerweapons7507 4 года назад

It's really nice to hold the High Voltage as long as it's not just high current.

@MikePoirier 7 лет назад

Hi Jay, I like it. It's very simple and works !

@PlasmaChannel 7 лет назад

+Mike Poirier im very glad you enjoyed the DIY. Thank you for the feedback

@musabacaku1686 3 года назад

@@PlasmaChannel can you touch this arcc

@voice4voicelessKrzysiek 5 лет назад

Nice job, J! I am going to do it.

@PlasmaChannel 5 лет назад

Give it a try! I'd suggest looking for the Sharper Image design, as the transformer inside is the same as in my video. Try looking for sharper image designs.

@Mareupia 7 лет назад

Gotta love that thriftshopping!! Fun episode Jay!

@PlasmaChannel 7 лет назад

Its all about those thrift stores. I'm telling ya

@Mareupia 7 лет назад

you're a man after my heart.... and my rather limited wallet

@themineofglitches8567 5 лет назад

Thanks best friend

@PlasmaChannel 5 лет назад

Glad you enjoyed!

@daffster13 5 лет назад

Bro, thanks, your videos have reminded me how much I used to love electricity. Now that my interest has been resparked. i can share these cool projects with my 10 y/o home-schooled son, Grant

@PlasmaChannel 5 лет назад

Please share your love of science. We are limited by how many people care to invest in the science fields.

@daffster13 5 лет назад

You keep the videos coming, I'll keep the neighborhood children entertained and busy with projects.

@roshannaidu6313 4 года назад

@@daffster13 heh "resparked"

@daffster13 4 года назад

@@roshannaidu6313 🤣😂🤣😂🤣

@jeffreywtoy 3 года назад

I enjoy your work Jay! Is it possible to produce more than one plasma Arc in one circuit?

@bentuffin6357 6 лет назад

Very helpful thanks

@PlasmaChannel 6 лет назад

Be safe, give it a try!

@ElectricExperimentsRobert33 7 лет назад

Nice video Jay :) I did not see the video notification..

@PlasmaChannel 7 лет назад

Thanks! That is a problem that you did not receive a notification....

@ElectricExperimentsRobert33 7 лет назад

I forgot to put the tick on your channel bell..

@mikelamb1253 3 года назад

Neither do I

@alvarofiomes831 3 года назад

kkkkk

@hongbinbin24 7 лет назад

Excellent!

@PlasmaChannel 7 лет назад

Hong, your viewership is greatly appreciated. I hope you stick around!

@victorst5997 7 лет назад

The moment I saw you made a new video I had to watch it right away

@PlasmaChannel 7 лет назад

I'm honored you stick with us! Thanks for enjoying our passion!

@clarketangye5272 3 года назад

Cool video

@CoolDudeClem 6 лет назад

I built a high voltage generator using a flyback, but wound a custom primary on to the exposed side of the core and used a 555 timer and a mosfet as the driver circuit, it gave arcs like this and if I put a reasonably strong audio signal into pin 5 I could get music to play out of the arc! I also built a 1KW ZVS flyback driver which gave me bright 8 inch arcs from a small flyback out of a portable TV.

@PlasmaChannel 6 лет назад

Excellent! But 8 inches????! In all my years building gadgets, i've never puled more than 3" from a flyback.

@Tsindur Год назад

@@PlasmaChannel I doubt he means initial arc but rather the peak of the pull back.

@kyle2015 5 лет назад

Something i noticed at the end you say dont forget, the brain heard forget, maybe try remember to like and subscribe. But, Love this video and went out to buy the suplies right after thanks!

@thatfeeble-mindedboy 5 лет назад

I guess that generates lots of negative ions as well? If you don’t know about those, you should look into it... The benefits are amazing. They literally make you feel better. Generated in nature by lightning and waterfalls, they are the “fresh” in fresh air. They bond with smoke, dust, and pollen causing them to stick together and they just fall out of the air to the floor.

@nivingoonesekera 5 лет назад

Nope not anymore there are research papers proving that negative ions doesnt affect any brainwaves to make you feel relaxed.

@FredtheDorfDorfman1985 5 лет назад

Yes negative ion generators tend to use flybacks that feed AC into Cockroft-Walton voltage multiplier cascades with negative output that is fed to a set of needles that discharge negative ion corona into the air and a fan blows air through that carries the ions out into the room. Ionic breeze machines like this one use plates charged with the negative high voltage, and electrode wires on the upwind side of the plates with the positive charge to electrically charge and move the air, like a high voltage lifter does, and air pollutants like pollen, mold spores, dust, dust mite feces, animal dander, etc cling to the plates and can be wiped off and discarded. They clean the air electrically and disperse negative ions to improve the air quality.

@aboahmedsukk7667 5 лет назад

This is nice i have made one like this but i used a hor. TR. And drive tr.

@josephhammaker2573 5 лет назад

You're awesome I love your channel

@PlasmaChannel 5 лет назад

Joseph thank you so much!

@user-kn4wv2wf1q 5 месяцев назад

nice video the best

@juntendo6104 4 года назад

Im pretty sure that Flyback used in air ioniser has rectifier and outputs DC. There is voltage doubler built-in so you dont need as high voltage winding and reducing cost.

@starchief93 2 года назад

Actually, pulsed DC arcs (like the ones from DC flybacks) have different characteristics to them. They sound different and look different. It's pretty awesome!

@DaxHamilton 2 года назад

Awesome video! Just starting to research HV. Quick question... is there a simple way to make the frequency of the output voltage variable?

@amarama4725 4 года назад

The bast channel ever thank you plasma

@PlasmaChannel 4 года назад

I'm honored by your opinion. Thank you.

@edgeeffect 6 лет назад

That's cool... in the old days we'd have found a flyback transformer out of a CRT device... but in this day and age of flat screens, they're getting rare. Good call on finding an ioniser, although they're not really THAT common on this side of The Atlantic. Although a bit more explanation of WHY we're using these components and how they work would be much more helpful.

@PlasmaChannel 6 лет назад

That is really interesting feedback. Are you in Europe? Ionizers are rare over there? They are all over the place in USA.

@eminusipi 4 года назад

I think that I recognize that device you showed in the opening. It is from the Amazing Whole Foods of electronic kits! Old Bob is still at it.

@PlasmaChannel 4 года назад

I've tried to find it online, to buy another, and they no longer exist. Breaks my heart!

@1Stevencat 4 года назад

Very cool,

@PlasmaChannel 4 года назад

Thank you Steven

@Adamisgood24 5 лет назад

Flyback transformer!!

@Jajaho2 6 лет назад

Nice outfit. Good content. Very entertaining.

@PlasmaChannel 6 лет назад

Thank you for the feedback! Seen our recent stuff?

@bcikablam3578 5 лет назад

I recently found an air ionizer at the thrift store, but upon disassembling, I found that there was a small box connected to the ionizing spikes. It says "input 120 vac 50-60 hertz, output 7kv dc negative." theoretically that would contain a transformer and diodes, but it could have some sort of electronic circuit. The whole air filter works anyway, so would it be worth trying to recover a transformer, or should I just use the whole thing like it's supposed to be used? and should I buy the transformer off amazon, or find/ try to make my own? sorry for a lot of questions, but I want to make sure I don't blow up my parent's basement...

@burdendmist6543 5 лет назад

"If you know where to look there very cheap." I'm thinking amazing? Lol

@nielsdaemen 5 лет назад

My first time on this channel and it looks to me like he was inspired by electroboom!

@PlasmaChannel 5 лет назад

Haha, I do enjoy that channel. However, I specialize in high voltage generation. Something most channels only touch on.

@dalenassar9152 Год назад

GREAT VIDEO!! Believe it or not, just 2 days after watching this video, I was in furniture store, and happened to see TWO of these ionizers ($5)...grabbed them up fast! Now I can build this. TWO QUESTIONS: 1) Are these transformers pure AC output..or may they have some internal diodes?? 2) Can they be connected in series for higher output? THANKS AGAIN!!!

@harishs3471 3 года назад

Great 👍🙂👌

@bastienguilbaud5768 3 года назад

I like how electroboom is often influenced by Jay. This time we got to see what happens when Jay channels his inner electroboom : he get shocked :-)

@domshakespeare1582 5 лет назад

hi plasma channel, just came across your channel. i'm from the u.k, had to google what a thrift store was lol. would this piece still work with a 240v supply? pretty new to this, but love it none the less. thanls

@PlasmaChannel 5 лет назад

Hi dom! It should work with 240 volt as well. However, only use the CFL inverters sold in your country, for specificly 240 volt input (from wall). Basically, the output will then be the same as what would happen here in the USA. On that note, greetings from Seattle, Washington!

@_P0tat07_ 5 лет назад

It’s easier to use a fluorescent ballast (the driver) that has the two yellow wires. There’s no guess work involved. Just connect one of the yellow wires to one pin on the primary and the matching color, (depending on which side you use) which is red or blue, to the other pin. Easy as that. Just saying!

@erlendse 7 лет назад

Clever, I haven't heard about that mix before. I didn't know ionizers used ferrite transformer. (but I know plasma balls do) Are you going to do more power supply videos? There is the TV flybacks, the AC stuff, mains frequency, high frequency, the safe and the deadly. And cover DC & AC and the difference in behavior? Some people seems to really overrate the voltage of Tesla coils too, also a nice topic.

@PlasmaChannel 7 лет назад

I fully agree with the over ratings of Tesla Coil. Pulse rate and EM envelope drastically affects spark length... I do plan on doing additional power supply videos! Thanks for the comment.

@erickoyervidesv8076 4 года назад

Your channel esta bien chingon saludos desde mexici

@PlasmaChannel 4 года назад

Greetings from Seattle, USA

@Andrey-wolt 6 лет назад

You is very very very best!!!my kumir

@PlasmaChannel 6 лет назад

Ha, thank you!

@juanmckenzy5365 Год назад

Love your content! Can I feed this with 12V dc? Let's say from car electrical system?... What do I need to do so?

@mihirchandran 3 года назад

You can also get a flyback transformer by disassembling an old cathode ray tube television.

@ionvlad2063 6 лет назад

Coll dude

@KY4K-10 4 года назад

Will this power the smaller voltage multiplier you built earlier with the plasma lighter.... my plasma lighter bit the dust. I did pick up the same ionic breeze like you have in the video. Good work!

@somsakwangphimon 3 года назад

COOL

@sammymasters7165 Год назад

heats up real fast

@tofajjolhossenrakib6668 5 лет назад

Nice

@PlasmaChannel 5 лет назад

My gratitude

@Aaron48219 3 года назад

Oh boy. You're a bad influence on me Jay. I never thought to use the guts from an ionic air purifier. Just happen to have two or three of those laying around in the basement too.

@PlasmaChannel 3 года назад

I can only hope to the the best of influences for children, and the worst of influences for adults.

@amandanish8294 4 года назад

Hey Jay, can you please provide schematic of over 20kv powers supply. I am actually curious about it

@thegorazd7346 3 года назад

I have the same transformer but i use homemade ZVS driver instead, so it's more powerfull. Can i use it for voltage multiplier? Also congratulations for 100k subs

@agapitojr.gilber8353 2 года назад

Thumb up bro! Quick question dude what is the ballast for? For high frequency only? For thesis purposes. Thanks

@culllaticiqsu83 6 лет назад

You can find something like this on the Avasva page. Full step-by-step instructions right on your desk.

@msvnr1951 6 лет назад

very nice explanation and sexy neat presentation. I believe you will become famous in the upcoming days. Question: is it a flyback transformer because it is also found in old CRT TV .

@msvnr1951 6 лет назад

how to make a DC high voltage power supply ???

@tiredironrepair 2 года назад

BTW an ionic or "electrostatic" air filter is the only kind that will remove nano particulate aerosols from the air. HEPA's are good but you need the power of plasma to have truly clean air. Unless you live in a tropical rain forest or something that is.

@numatechprototypes222 4 года назад

You can get the same type of flyback Transformer out of pretty much any old box computer monitors or TVs

@PlasmaChannel 4 года назад

Though, those are DC fly backs and you cannot produce AC from them. The type shown in this video are exclusively AC.

@modelllichtsysteme 5 лет назад

3:37 - 3:38 Watch in slowmotion and you see sparks going into Jay's hand

@PlasmaChannel 5 лет назад

A spark a day keeps the frown away.

@Electronic4081 5 лет назад

I found that you can buy a ZVS driver cheap from amazon and it runs greatly with a fly back from a CRT tv. Also you can get a ZVS driver and a fly back from amazon for very cheap!

@PlasmaChannel 5 лет назад

Yeah, those drivers are impressive.

@jerrytuma8972 4 года назад

How did you know it was safe to touch? And is there a way to adjust the frequency to play audio through a voltage multiplier

@youngcuzzoproductions 2 года назад

arcs are probebly so high in frequency that it dosnt shock it just burns, still shouldnt touch it

@electric_photon4660 4 года назад

I stumbled upon this while experimenting years ago and was able to achieve 100kV. I seemed to have gotten lucky with the flyback I used cause I couldn't replicate it with any others

@PlasmaChannel 4 года назад

It is funny how each flyback can produce drastically different results. 100kv is impressive.

@electric_photon4660 4 года назад

@@PlasmaChannel I have some really old ones that will produce arcs as big as a MOT with a zvs driver and then some that just make little sparks

@wildmanfujiami5870 4 года назад

@@PlasmaChannel i'm sure this has a lot to do with wire gauge, the Q factor of the transformer, the type of driver waveform (sine, square, sawtooth), and its natural resonance range. i built a transformer from scratch that consisted of just 1 layer of 32AWG enamel wire on an old EM choke core that was about 2.5 inches long and an inch wide that must have produced at least 20kv at the right frequency with a square wave, given the arc length

@corywilson1938 7 лет назад

another wonderful video man. you should also do a diy tower

@PlasmaChannel 7 лет назад

Thank you Cory!

@PlasmaChannel 7 лет назад

You mean a Tesla Coil, or Voltage Multiplier?

@corywilson1938 7 лет назад

yes

@farewell_8450 7 лет назад

Plasma Channel But, why not do both ? ;)

@corywilson1938 7 лет назад

yes please do both

@nigel-matthews 4 года назад

I never realized the flyback transformers from those ionic breezes didn't have the diodes like the ones from CRT TVs.

@ozymandiasking173 4 года назад

i was wondering about that. i thoughr all US made flybacks were DC

@mr.squidygaming8651 5 лет назад

thanks for those links :)))))))))))))))))))))))))))))))))))))))))

@PlasmaChannel 4 года назад

Thank you for watching!

@fastcyanide63 6 лет назад

3:38 he gets some

@thefunnyguy16 11 месяцев назад

He finaly shoked him self in the ELECTROBOOM wey!🤣

@PlasmaChannel 11 месяцев назад

Haha I've been doing that since 2004 my friend.

@16BITMEME 6 лет назад

Pleas make a video on flyback driver with a bugzapper its really work..

@legobuildingsrewiew7538 5 лет назад

@PlasmaChannel 5 лет назад

Happy you enjoyed it

@tdtrecordsmusic 4 года назад

Serious question/request >> Can u make a mini-series called 'how not to die or blow up your stuff " what do I need to look out for to 'not get stuck' ,, to not have something across the room light on fire ,, etc etc ...

@coolguy_krishna4540 Год назад

thanks for the video, I have a doubt regarding the output nature, as the flyback transformer is having internally connected rectifier circuit it is gonna give a dc output but you were saying an ac output, correct me if I am wrong

@TeslaExplorer 7 лет назад

Great video, im glad you didn't touch that electrode ;)

@PlasmaChannel 7 лет назад

Ha, it hurts every time I brush up against it! Thanks for the compliment

@PlasmaChannel 7 лет назад

We love your videos by the way. Keep them coming. We should consider a collaboration

@TeslaExplorer 7 лет назад

brushing an inch away on that bad boy :P

@TeslaExplorer 7 лет назад

I completely agree! I'm few miles away! Love all your video's, keeps me pumped!

@PlasmaChannel 7 лет назад

+Tesla Explorer you are Dallas correct?

@andresamaniego4647 4 года назад

Hey! Love the channel! I have a question.... I’ve been working on a similar project but the question I have is what exactly did you do with the remaining wires. I know the ballast has 4 output wires and you have to use 2 but did you do anything with the other two? Did you just cap them off?

@PlasmaChannel 4 года назад

Hello, thank you! Yes, I just cut them off and capped them.

@ruby_R53 3 года назад

if you definitely do not need to use the remaining ballast wires, I recommend just unsoldering them, then you will have a large cable that you can reuse

@nielsdaemen 3 года назад

Are you shure that flyback outputs AC? Looks just like one from a CRT wich outputs DC

@smashdesystem 7 лет назад

That's so simple yet brilliant. I wonder how much voltage could you output with a microwave transformer instead.

@gogo311 7 лет назад

MOT operates at 50Hz, it wouldn't drive a flyback transformer.

@inductor1.77 7 лет назад

lmao, hook up a mot to it and youd have a good bang.

@felixboian-togyik3346 6 лет назад

ka boom :)

@brianwu3566 6 лет назад

2000vac-2400vac

@greenthizzle4 6 лет назад

gogo311 your europe/England is showing..

@roycaplinger2134 6 лет назад

I like this episode however I have a transformer from an outside stinger model bug zapper. Can you do an episode on how to turn it into a high voltage power supply?

@PlasmaChannel 6 лет назад

Roy, I am confused. The transformer already is a HV supply

@supriyode8716 3 года назад

Nice video as always, what is the output power of this supply and can it power a powerful spark gap tesla coil?

@cobydingman3102 3 года назад

Thats what im wondering.

@joseignaciorodriguezferrey2257 4 года назад

Loved it! I wonder, Will it work if you replace that transformer with one from a microwave? Thanx!

@PlasmaChannel 4 года назад

It will not work with an MOT. Those are designed for 60hZ. This is a high frequency circuit.

@joseignaciorodriguezferrey2257 4 года назад

@@PlasmaChannel will a flyback transformer from an old tv work? I'm trying to generate a steady arc in order to produce nitric acid.

@thetribal697 Год назад

Going to my own diy powder coating gun with voltage multiplier

@ronalmanurung1647 6 лет назад

this really boombastik channel

@PlasmaChannel 6 лет назад

Thanks! Check out a lot of our newer episodes. There have been some very fun do it yourself videos.

@lakshanelectric7450 3 года назад

Please tell us how to make electric fence curkit at home

@eleqbike 6 лет назад

Will it be able to work on low frequencies also?

@mernok2001 4 года назад

Why didnt you use the original driver circuit in the ozone generator/ionizer?

@christopherthumm4348 2 года назад

Why not use the driver from the ionic breeze ? Maybe use that for a video

@blueskys8814 4 года назад

I could not find 300 volt fluorescent ballast with four output leads at Lowes or home depot. I did find the exact same kind of transformer on e-bay I got two of them brand new for $15 that included shipping. Fluorescent tubes and ballasts are becoming more and more rare especially the t5s they are being replaced by l e d.

@PlasmaChannel 4 года назад

Nearly all ballasts output 300 volts at a minimum, others output 600 volts. Did you look in the right isle?

@deanbrown6887 3 года назад

Hey love the video. Can you use the transformer with just 110V? Does it give decent arcs? Just wondering why you need the electronic ballast.

@PlasmaChannel 3 года назад

If you just plug the transformer into the wall, it will blow up immediately. Too much power being provided. The driver limits power and also switches the power on and off incredibly fast. That fast on-off-on is what drives the flyback.