T-REX450 H1 Gyro AutoPilot Test Flight 

you're welcome. I'm glad it was helpful.

멋지게 봐주셔서 감사합니다. 셋팅만 잘하시면 신박한 기능들로 재미있게 날릴 수 있습니다.^^

그래요. 사장님? ㅎㅎ다행입니다.^^

꼭 성공하실꺼에요. 너무 걱정하지 마셔요. 제가 응원하겠습니다.^^

Genial !!!

@@michaelmetternich6350 Gracias por ver.

@@helisilverwings8924 sir why my gps n0t turnimgm t0 s0lid green. Yell0w blinking 0nly

@@blow9899 Hello. Sorry for the late reply. If the yellow light is on continuously, it means that the green light is not on because the GPS calibration is not done properly. Try setting the GPS calibration again. And there is an issue that the GPS module causes an error with short lines. If you purchase a GPS module long cable and install it, you will be able to solve it.

olá. Vi seu canal no RU-vid. Vejo que você está usando bem o giroscópio H1. Existe algum problema? O módulo GPS giroscópio H1 está sujeito a quebras. Acho que substituir o módulo GPS resolverá um pouco o problema.

@@helisilverwings8924 estou querendo adaptar um no trex 450L eu comprei o rádio, receptor,vou tira o GPS do fw450 e colocar no trex450L então tem como fazer um vídeo passo a passo? O meu rádio é Freesky

Thank you for checking out the fw450 receiver. You can use regular servos, but they may not be enough for large helicopters and are limited to 6V, so you'll need to use an external BEC to send 6V to the regular servos. And in severe cases, it can cause crashes or swash rolling during flight. Therefore, we recommend using a digital servo (SBus) and making sure to use 7.4V.

hello. nice to meet you Looking to fit the FW 450 V3 to your Align Trex 700 helicopter? To use the FW 450 radio, remove the FW 450 V3 helicopter receiver. Only then can the Align Trex 700 helicopter be operated.

blog.naver.com/gracebst/222272404126?trackingCode=blog_bloghome_searchlist Consulte o artigo. A tradução é necessária.

조종기에 따라 6채널나 9채널을 사용할수 있습니다. H1 자이로는 드론 처럼 편안하게 날릴 수 있는 장점이 있습니다. 조종기 추천은 9채널 후타바를 추천합니다.

@@helisilverwings8924 답변 감사드립니다. 과거에 비행기, 헬기를 날리다가 10년간 중단하고 요즘은 토이드론 갖고 날리는데 그간 기술이 많이 발전했네요. 드론은 별로 힘들지 않는데 헬기는 Align Trex, 3gx flybarless gyro 로 셋팅하고 날렸는데 이게 보통 힘든게 아니더군요. 몇주동안 조립하고 뒷마당에서 시험 호버링하다가 박살나기도 했습니다. 아직도 Trex 500, 550 과 600을 보유하고 있는데 H1 gps gyro 로 바꿀까하는데 H1 프로그래밍이 어렵지 않나 해서 여쭙니다. Align 의 3 gx gyro는 문제가 많았습니다.

네 ㅎㅎ 어떤 기체이건 450-700급까지 기존 기자재 그래도 장착하여 비행 가능합니다.^^ 정말 신기한 자이로 입니다.^^

Yes First you need to adjust the trim on the remote control. The neutral value is 1500.

This is for H1 flight control

Tail compensation "Normal" or "Reverse" must be selected in Tail Setup. And you also need to check if it is 1520 or 760 pulses.

sorry. I understand that the H1 Gyro does not support the flybar system. The only way to install an H1 gyro is to remove the ailerons and modify them with a 3-axis swash.

hello. Thank you for watching the video. The number of channels requires 9 channels.

@@helisilverwings8924 merci

아마 gps모드로 놓고 켈리 하셔야 합니다.

@@helisilverwings8924 네 감사합니다 ㅎㅎ

네 GPS 모드로 잘 날리고 있습니다. ㅎㅎ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XkUTbQgxJkM.html

감사합니다.^^

Does the electronic transmission work normally?

I put the key in GPS mode and did GPS calibration.

@@helisilverwings8924 so if the GPS is disabled we can fly like an ordinary helicopter but without a gyroscope??

@@helisilverwings8924 I want to buy a disassembled trex, what I need to assemble it? What software to program the servos and the radio transmitter

Hi Motor brush location is mounted on the bottom under the aircraft. The pinion is 13T, and the motor brush model is [Scorpion] HK2221-8 BL Motor(3,595KV).

@@helisilverwings8924 Hello brother, I can come to me with Motor Brisles. I want to make helicoptar dron, but I don't have the pieces. You can bring me the pieces

​@@onarnajib7916 Hello. Was it helpful?

@@helisilverwings8924 Yes, but I want to tell me the price of mator proshlys and the price of ESC security

@@onarnajib7916 Thank you.

I have piloted 18 helicopters, and the helicopter in the video is a special aircraft. thank you.

네 어떤 기체이던지 가능하십니다.^^

Yes. Futaba S-Bus Receiver R3008SB. The H1 Gyro is the recommended receiver.

@@helisilverwings8924 merci👍