Tao Tao 125 - No Start / Bad Starter Relay - Kids 125cc ATV Won't Run 

You've got a bad starter, a low battery, or a stuck motor. Let me know what you need! Check out: www.ebay.com/str/midnebraskamotorsports

Thank you. And thanks for watching. Let us know if there is anything else you need! www.midnebraskamotorsports.com/

Buy a new carburetor. Amazon has them for $15

Carburador maybe

Did the new starter fix this problem

Same issue. Any Resolution?

@@mikeypal1987 Yes, check your wiring. From the ignition switch follow the 4 wires Red, Green, White, Black if you got this setup down to the white clip style plug and check the connection there. For me the plug was corroded thus not making a connection. If that looks good then check the fuse usually next to the relay, if that doesn’t work then trace all the exposed wires with white plug style connectors. To check if the starter and relay are good. Grab a screw driver with a handle that doesn’t conduct electricity and jumper the two terminals on the relay with the metal rod of the screw driver. If the ATV starts cranking then your starter relay is good you just have a loose connection somewhere.

@amhood143 is on point with checking all of the white plugs. I can make everything flicker if I wiggle a couple of the wires inside of them. I think the white plugs don't have the correct size terminals inside of them causing the whole connection to be loose. I just figured the white plug issue out about 3 or 4 days ago and am getting ready to cut every single one of them off one at a time and either just solder them together or crimp on new disconnects. It's weird because my problem just happened all of a sudden and some of the white plugs are ok and some are extremely loose. So that's why I'm cutting them all off so I don't have to worry about another going bad. My Tao Rhino only has about 2.5 hours and maybe 4 or 5 miles on it. Brand new bought from Powersportsmax got the assembly required option and put the rest of it together myself. It's not much to do just put the handle bars, brake drum and tires a couple other little things to finish assembly. I've had a few issues with it from day one but nothing super major. I did change the shitty carburetor over to a 26mm Nibbi (excellent carbs) and I upgraded the dental floss battery cables to 8 gauge and plasti-dipped the plastic to tri color camo and raptor lined the chassis and rims (excellent liner too) . But for sure at least ditch the stock carb or you'll have problems with it. And for what little use it has it was getting with it only being a 197cc the Nibbi carb pumped it up for sure. Also if you decide to get one of these get a manual 4 or 5 speed or you'll be bitching about it not having no power because mine sure ain't lacking in that department it will scat

​@@hamood143you nailed it main

Sounds like a safety switch issue. Have you replaced or inspected your brake safety sensor. Other thought: your on/off switch in the correct position? Let us know.

I would say more than likely it is the switch. Not totally sure how that system works, but the relay should work with the remote and the switch. Let me know what you find. Thanks for watching!

Update?

Just checked TaoTao microfiche. They call it a Starter Relay 12v Solenoid. Does that make us both right?? Thanks for watching. Check out out other Tao videos for more critiquing!

Ha, yeah, I think that was a bit of an exaggeration ;).. good luck finding anything below 1K

Did you ever figure out the issue. Ours had the same thing happen

Exhaust pipe cracked and was resting on the harness, burnt though all the wiring.

​@@adamnaslund4745check the fuse holder under the seat and make sure it's in the holder good or do like I did and changed it to a better inline fuse holder. Not saying that's what's wrong with yours but I had and heard alot of the same problem

Huh good question

Check out: www.monsterscooterparts.com/ Thanks for watching. Have you watched our other Tao Tao Videos?

VMC chinese parts