Тёмный

TH400 Rebuild Series - Teardown (Disassembly) 

Southpaw Autoworks
Подписаться 25 тыс.
Просмотров 35 тыс.
50% 1

Learn how to disassemble the GM TH400 automatic transmission. Get a bird's eye view on the basic Turbo 400 teardown techniques, along with some helpful disassembly tips and tricks. Equally important, also learn what NOT to touch during disassembly.
See what it takes to remove all of the TH400 sub-assemblies from the transmission case:
1). Pump.
2). Input Drum (Forward Clutch).
3). Direct Drum (Direct Clutch).
4). Intermediate Clutch.
5). Planetary gear set.
6). Intermediate Band & Low-Reverse Band.
7). Valve-body, governor, and modulator.
Help This Channel Grow:
Coming Soon!
*****TH400 Build Series*******
TH400 Teardown: You're currently watching it.
TH400 Inspection: • TH400 Rebuild Series -...
TH400 Building Clutch Drums: • TH400 Build Series - B...
TH400 Building Clutch Drums (Continued): • TH400 Build Series - B...
TH400 Bushings: • TH400 Build Series - B...
TH400 Prepping Case for Assembly: • TH400 Build Series - P...
TH400 Planetary Gear Set - Assembly & Installation: • TH400 Build Series - P...
TH400 Intermediate Clutch, Band, Direct & Forward Drums: • TH400 Build Series - I...
TH400 Pump + Front End-Play: • TH400 Build Series - P...
TH400 Valve-Body + Servos: • TH400 Build Series - V...
TH400 Filter + Pan + Modulator + Governor + Speedo: • TH400 Build Series - F...
TH400 Different Cases (Chevy vs BPO): Coming Soon!
RESOURCES:
1) Apparel:
Eyes: amzn.to/2JguhZN
Ears: amzn.to/3uuVyOr amzn.to/3P7AerI
Lungs: amzn.to/3VGhLoD amzn.to/3FAFX6w
Hands:
Nitrile Gloves: amzn.to/2Y6XwSN
Work Gloves: amzn.to/3ux43IT amzn.to/3P9xtpN
Feet: amzn.to/2GD9eP7
Work Shirt: amzn.to/3HhDdMf
Work Pants: amzn.to/3Pfe8nq
3) TH400 Repair Manuals: 📕
amzn.to/30DYx6Y
4) TH400 Tools: 🔧
230-Piece Tool Set: amzn.to/2L0AtWv
Pump Puller: amzn.to/2VmhXgZ
3-Ton Arbor Press (12 inch working height): amzn.to/2Reqmyx
Lip Seal Installer: amzn.to/2Gz4KI5
Lip Seal Installer (Huge Time/Headache Saver): amzn.to/2MxUC8O
Pump Alignment Band: amzn.to/2J13lNF
Universal Clutch Spring Compressor (Use in trans & drums): amzn.to/2YHQGn6
Adjustable Clutch Spring Compressor (Use with shop press): amzn.to/2W2DAQs
Universal Bushing Driver Kit (Larger Sizes): amzn.to/2M1aQHn
Universal Bushing Driver Kit (Smaller Sizes): amzn.to/2Et1ON3
Snap Ring Pliers (Clutch Spring Compressor Snap Ring): amzn.to/2GwwixP
Snap Ring Plier Set (Pump Circlip Snap Rings): amzn.to/2IUxpdu
Feeler Blades (Straight): amzn.to/3uwQTvi
Feeler Blades (Offset): amzn.to/3Y3ehy1
Pick Set: amzn.to/3F9ezL7
Pocket Screwdriver: amzn.to/3FfsCiC
5) TH400 Parts: 🔩
Overhaul Kit (Includes Bushing Kit, Bearing Kit, Bands, etc): amzn.to/2MhK4e7
Valve-Body Kit: amzn.to/2HwNAwE amzn.to/3iKqF67
Accumulator (Aluminum): amzn.to/3FhYxzt
Band (Front) (Intermediate): amzn.to/2EpgZGU
Band (Rear) (Low/Reverse): amzn.to/2QjqpbN
Intermediate Sprag: ebay.us/PA63ZL
Intermediate Roller: ebay.us/lK2SXd
Low Roller: amzn.to/3W17C5P
Pump Gears: ebay.us/uLDtbP
Bushings:
Kit: amzn.to/2QpxY0V
Upgraded Case Bushing: amzn.to/3Bjhy2L
Bearing Kit: amzn.to/30APEev
Washer Kit: amzn.to/2QgjPmx
Oversized Washer: ebay.us/H5BzBd
Governor Gear Kit: amzn.to/2WjQ7lU
Modulator (Red Stripe): amzn.to/2ErS99H
6) Shop Supplies: ✏️
Transmission Assembly Gel: amzn.to/2WrN7nT
Thread Locker: amzn.to/2YLtmFk
Brake Parts Cleaner: amzn.to/2HxQ1Pz
DISCLOSURE: 🕵
Links provided are affiliated links with the associated websites. While there is no extra cost to the purchaser, a small portion of the sale goes to support this RU-vid channel.

Опубликовано:

 

3 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 116   
@wileym1981
@wileym1981 Год назад
I watched this whole series and was able to successfully rebuild my TH400. Thank you.
@gizzmo5952
@gizzmo5952 2 месяца назад
I'm using these videos to help me rebiuld my t400, it's a 1974, out of a vette. I'll keep ya informed about the rebiuld, but your videos are awsome. I've watched everyone of them 4 or 5 times, I have it playing as I go along. So there shouldn't be a problem. Thanks again.
@SouthpawAutoworks
@SouthpawAutoworks 2 месяца назад
That's awesome! Happy building.
@BumDad
@BumDad 6 месяцев назад
I done did it! Our motorhome is back on the road after 8 months of being broken down... i have shifted my hatred for transmissions, to a love and fascination of them.... I learned so many new things on that adventure, mostly from you guys.... really well covered videos... Thank you guys so much, Id say i saved thousands, but a mechanic just isn't an option for a single dad on welfare :D
@SouthpawAutoworks
@SouthpawAutoworks 5 месяцев назад
Great job! That's awesome!! You gotta be feeling good about that. It's a feeling that can't be bought, only earned. Glad the video series was helpful. Really appreciate you taking the time to share you thoughts.
@jasonjennings5833
@jasonjennings5833 Год назад
This is the best th400 video on RU-vid. Trust me. I’ve watched them all.
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Right on! Really appreciate the feedback! Thanks for dropping us a line.
@stephenzampedri8712
@stephenzampedri8712 2 года назад
I always enjoy your instructional videos on transmission rebuilds. I have an old TH400 that is laying around in my shed and I’d like to rebuild it myself. The video series will encourage me to do my first transmission rebuild. Thanks
@geerbangr
@geerbangr Год назад
By far the best video for disassembly.
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Right on. Glad you enjoyed it. Thanks for dropping us a line.
@SarahCretulNieves
@SarahCretulNieves 4 месяца назад
I’m trying to build a turbo trans by my self without my husbands help.. thank you sir for all your help god bless
@SouthpawAutoworks
@SouthpawAutoworks 4 месяца назад
Right on! Happy building.
@dimitrid268
@dimitrid268 2 месяца назад
The way you explain it is very detailed and straight to the point! Never had a chance to rebuild a TH400, but with the help of this video, pretty sure I will make easy work of it. Thanks!
@SouthpawAutoworks
@SouthpawAutoworks 2 месяца назад
Right on. Thank you.
@REPOOCNITSUJ
@REPOOCNITSUJ 2 года назад
That is the best Transmission video on RU-vid.... period!! Wow.... the video was amazing!!! the highlighted snap rings on the center support were absolutely outstanding!! .... you better believe I will be watching that over and over and over... that was awesome... I can't say enough.. Great work!!
@SouthpawAutoworks
@SouthpawAutoworks 2 года назад
What a compliment! Thank you. It was a lot of work...blood, sweat, and gears. But, it's a labor of love! Thank you for taking the time to write what you wrote. Appreciate you! PS - If it feels right to you, please help me spread the word about this channel. 1 Handed Transmission Rebuilder: (60-Sec Preview) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-y3Vixa_Ec1E.html TH400 Rebuild Series - Coming Soon (90-Sec Preview) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-q0eciXU8YEI.html
@richardnelson657
@richardnelson657 5 месяцев назад
Excellent video.
@SouthpawAutoworks
@SouthpawAutoworks 5 месяцев назад
Thank you for your comment.
@patjohnson3100
@patjohnson3100 Год назад
Automatic transmissions are great examples of human engineering genius. Absolutely amazing. The TH400 in my 1994 GMC still works fine at 290,000 miles. Keep them maintained and they will take care of you. This is an excellent video series. The narrative is very important . Please keep it up. Thanks
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Maintenance...Couldn't agree more! Thank you, so much, for taking the time to drop us a line. Your support is appreciated.
@CG11368
@CG11368 3 месяца назад
Wow, great video and step by step. Thank you for all the pro tips and straight to the point explanations.
@zackclark8887
@zackclark8887 5 месяцев назад
Absolutely awesome video. This guy is a terminator. Much appreciated! Thank you for your help in sharing your experience!
@gafesillo
@gafesillo 2 месяца назад
Que buen video, estoy apunto de hacer un overhaul a mi th400
@DavidFloer
@DavidFloer 6 месяцев назад
I'm fixing to rebuild mine, 3/18/24 First time rebuild! These videos will make this easy. I have already watched all the videos! I took the transmission out of the truck this past Wednesday. Had to take the exhaust out because it was in the way. I can only work on it on my days off and still don't have all the parts I need, of course it takes a little money to buy parts. A transmission shop wanted 3600.00 to rebuild it, and I said really, hmmm... I don't think so. Said hard to find parts, ya right! I guess it's going to make a mess on the garage floor, time to buy some Kitty litter Lol! Thank you for these videos! Oh I bought a little hand pump to get most of the fluid out, saves on Kitty litter!
@nickkiofetzis5667
@nickkiofetzis5667 Год назад
awsome skills from andy walker texas ranger chuck norris twin amazing knowledge and skills and briliant teaching thanks guys for the tutoring i am very impressed, cheers nick.
@aubreychaparral32
@aubreychaparral32 2 года назад
Just used this video to disassemble my first transmission build. You guys explain everything very well and make it easy to follow along. Now you gotta get a reassembly video together so I can see how the hell this thing goes back together hahaha
@SouthpawAutoworks
@SouthpawAutoworks 2 года назад
Right on!! The positive feedback is greatly appreciated. We're working on it the rest of the series. Stay tuned! Thanks for dropping us a line!
@aubreychaparral32
@aubreychaparral32 2 года назад
@@SouthpawAutoworks I am waiting ever so patiently haha. Not in a hurry to get it back together but you bet the day your video comes out, I’ll be in the garage doing just that 😂
@SouthpawAutoworks
@SouthpawAutoworks 2 года назад
That's awesome! Haha
@bloodfallinCOD
@bloodfallinCOD 2 года назад
Great first video for the series. When I rebuilt mine I never could figure out how to get the kick down connector out. So I left it alone. So even though I rebuilt one I have learned something.
@SouthpawAutoworks
@SouthpawAutoworks 2 года назад
That connector is a challenge to remove, without the "special" tool. "learned something"......I'm really glad to hear that! Thank you for taking the time to share your thoughts. You are appreciated.
@anthonyponis9684
@anthonyponis9684 Год назад
Thanks for the info, thanks for your time, Very informative!
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Glad it was helpful! Thanks for dropping us a line.
@blitzbrick7095
@blitzbrick7095 9 месяцев назад
Fantastic video with passionated people! Great! Greetings from Germany!
@SouthpawAutoworks
@SouthpawAutoworks 9 месяцев назад
Thank you very much. Glad you enjoyed it.
@kanakamaoli9642
@kanakamaoli9642 Год назад
Good job, you make it look easy, but it's still intimidating
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Thanks for checking out this video, and dropping a line.
@kenchaffin4946
@kenchaffin4946 2 года назад
Outstanding content the builder is absolutely amazing can't wait for the next one 👍
@SouthpawAutoworks
@SouthpawAutoworks 2 года назад
The positive feedback is greatly appreciated. We're excited to finish the next one. Thanks for taking the time to drop us a line!
@mikhaelbardosson1102
@mikhaelbardosson1102 Год назад
Best TH400 video ever! Truly amazing work!
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Glad you enjoyed it. Thanks for leaving a comment.
@anthonyjohnson2570
@anthonyjohnson2570 Год назад
I like the southpaw logo. Very Nice
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Right on. Thanks for dropping us a line.
@riprob93
@riprob93 Год назад
Awesome video!!
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Glad you enjoyed it
@chrisdamato6807
@chrisdamato6807 2 года назад
Great video. Looking forward to the whole series. I'm getting ready to rebuild a 400 for my FJ40.
@SouthpawAutoworks
@SouthpawAutoworks 2 года назад
Right on! That's a really cool ride! Thanks for dropping us a line, Chris.
@peterbarnhardt8573
@peterbarnhardt8573 Год назад
you guys do a great job! both with video and explaining. My son and I are rebuilding our 1st truck together. A 1983 GMC K1500. We have already rebuilt the 350 to a 383 stroker and now we are taking on the transmission. Would be awesome to see a video about the transfer case as well. Thank you both!
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Father son truck build...right on!! Talking about making some great memories... Transfers case, noted. Positive feedback is always nice. Thanks for dropping us a line!
@jraydelatorre
@jraydelatorre 2 года назад
Awesome video
@SouthpawAutoworks
@SouthpawAutoworks 2 года назад
Thank you! Really appreciate you dropping us a line!
@jraydelatorre
@jraydelatorre 2 года назад
You’re welcome I’ll be watching for the rebuild
@333chamaeleon6
@333chamaeleon6 7 месяцев назад
That’s a great explanation. Thank you.
@SouthpawAutoworks
@SouthpawAutoworks 7 месяцев назад
Glad it was helpful!
@ronking5787
@ronking5787 Год назад
Excellent, thanks for the clarity.
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Glad it was helpful. Thanks for dropping us a line.
@bdmotors1
@bdmotors1 Год назад
Thanks so much for doing that extra but in the middle about the snap rings, I feel like it was a lot of effort with little appreciation 😊So thanks for that!! U guys deserve way more subscribes
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Really appreciate you commenting on that. We're on a mission to give in a way that no one else, on here, is willing to do. Thanks for the support.
@elsdp-4560
@elsdp-4560 Год назад
Thank you for sharing.👍
@SouthpawAutoworks
@SouthpawAutoworks 9 месяцев назад
You bet.
@andrewjohnson2162
@andrewjohnson2162 2 года назад
Good job Robert and Andy very nice video!!!!
@SouthpawAutoworks
@SouthpawAutoworks 2 года назад
Thanks for dropping us a line!
@billeustace3758
@billeustace3758 11 месяцев назад
Excellent video guys
@SouthpawAutoworks
@SouthpawAutoworks 11 месяцев назад
Thank you. Glad you enjoyed it.
@Dagge61
@Dagge61 Год назад
Very nice video. Thank you!
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Right on. Thanks for dropping us a line.
@azkards
@azkards 2 года назад
Great video as always - thanks guys
@SouthpawAutoworks
@SouthpawAutoworks 2 года назад
Thanks for dropping by, Mike!
@ericshaffer7088
@ericshaffer7088 7 месяцев назад
Very nice video.
@ChevyHalfTon
@ChevyHalfTon Год назад
Great video super informative 👍🏽👍🏽
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Glad you enjoyed it. Thanks for dropping us a line.
@tronetankoon9983
@tronetankoon9983 2 года назад
I. Like. Watch. Teardown. And. Rebuild. Guyana. S.. A
@SouthpawAutoworks
@SouthpawAutoworks 2 года назад
Right on! Thank you for the comment.
@hustonbaker9051
@hustonbaker9051 Год назад
Hi, this is Huston I have a 1969 Pontiac Grand Prix with a TH400 I took it out the garage a few days ago I took it out for a drive it seem to skip 2nd gear and go right into drive and if I manual shift it from 1st to 2nd sometimes it slips and some times i doesn't but definitely have something going on with 2nd I rebuilt the governor and replaced the detent solenoid, what does this sound like is the problem?
@jamesjohnson9327
@jamesjohnson9327 Год назад
I have question.. what would cause fluid to come from top of dip stick when driving
@garyharris1125
@garyharris1125 4 месяца назад
Great videos. Just have one question. Clicking in reverse
@ralphwindh9334
@ralphwindh9334 Год назад
Perfekt Tack 🙂
@jordansmith8467
@jordansmith8467 2 года назад
Outstanding content
@SouthpawAutoworks
@SouthpawAutoworks 2 года назад
Glad you enjoyed it! Thanks for dropping us a line!
@robertpipkin3018
@robertpipkin3018 2 года назад
awesome job guys!
@SouthpawAutoworks
@SouthpawAutoworks 2 года назад
Thanks for checking it out, and for dropping us a line!
@jasonjennings5833
@jasonjennings5833 Год назад
Nice editing.
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Thanks! It's a labor of love. There's two primary joys in life; Growing. Giving. We're here to do both. Appreciate you taking the time to drop us a line.
@rust_hoarder_garage
@rust_hoarder_garage 2 года назад
Excellent video, hoping during the rebuild he goes over doing air checks, that info is hard to find in detail, and if air checks are different between stock and a trans with the dual feed mod.
@SouthpawAutoworks
@SouthpawAutoworks 2 года назад
Andy will definitely be covering air checks, in detail. This video series is for a stock build. We won't be covering dual feed mod (Direct Drum), at this point in time. However, we may do a performance build in the future! The positive feedback is appreciated. Thanks for dropping us a line!
@davidgonzalez9785
@davidgonzalez9785 10 месяцев назад
Very good video thanks for taking the time to publish it. Question on the sun gear shaft there are 2 types one has 32 splines and the early ones 28 splines. If the sun gear has 32 spline can it use the 28 splined sun gear shaft? Are they interchangeable? Which is stronger of the 2 shafts 32 spline or 28 spline? Thanks
@ShadeTree97
@ShadeTree97 10 месяцев назад
Ole boy just be tossing shit 😂
@trevorj.clarkdc9592
@trevorj.clarkdc9592 Год назад
Andy, Robert; may I buy you guys a beer?
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Most common reason flor this trans to not have 3rd & 4th gear, is due to a failed 3-4 Clutch pack.
@alaaalhiwat1327
@alaaalhiwat1327 2 года назад
proud of you I really do
@SouthpawAutoworks
@SouthpawAutoworks 2 года назад
Glad you enjoyed it. Thanks for dropping us a line!
@alaaalhiwat1327
@alaaalhiwat1327 2 года назад
I always watching u video 😂
@alaaalhiwat1327
@alaaalhiwat1327 2 года назад
I always watching u video 😂
@alaaalhiwat1327
@alaaalhiwat1327 2 года назад
dearly friend iam Abraham from Jordan proud of you some people have many hands and can do nothing but u really good guy keep going iam with you all the way be good 👍🏻
@charlessaunders7480
@charlessaunders7480 8 месяцев назад
I notice the last Removal,output shaft and planetary...the large piece(drum?) has short square bungs....mi e has longer,what's difference?
@toddrhine7648
@toddrhine7648 6 месяцев назад
Great video! Let's just see if you answer this? The TH400 trans I have pushes the fluid out only sometime after the engine & trans sit, after running it for abit. Can't find where it may be leaking from though. What are your thoughts? Note: I did subscribe and hit your bell!
@anthonyanderson464
@anthonyanderson464 22 часа назад
Why does my turbo 400 have no first gear, everything else works fine. It is in a one ton with 4.56 gears ,so it isn't that big of deal but it is coming out this winter.
@TempoDrift1480
@TempoDrift1480 5 месяцев назад
I couldn't tell by the angle of filming but can I remove that large accumulator cover without removing the valve body or does it block some of the bolts? I'd sure hate to have to remove that valve body while it's installed but I have to refresh that accumulator because I'm banging into reverse. Hopefully that will take care of (that) issue among others.
@chadculver7986
@chadculver7986 10 месяцев назад
How do you know if the correct output shaft is present for a 4wd. I am rebuilding a used trans and not sure about the out put shaft length. thank you
@bena2293
@bena2293 2 месяца назад
Great Work South Paw. One that help me in my first Over haul, was 3 Small Card Tables, where I could Separate, all the Large Components, and then did the Tear Down on Each of the Large Parts, for Cleaning and Inspection, Guys Where GLOVES, GOOD QUALITY RUBBER MECHANIC GLOVES, Yes, I know the you, Bath in Acetone, Drink ATF, and Fart Fire but Exposure to ATF on your Skin can Lead to, Looking and Acting like, joe Dementia biden, Drooling, Stammering, Bad Memory, Explosive Diarrhea, so Protect you Self. Go for it.
@TheMizzlefish
@TheMizzlefish 7 месяцев назад
Th400 4900 rpm at 55 with 3.08 gears, what could cause this??? makes @ 650 hp. It will still spin tires in 3rd, i cant figure this out, what could cause this under ratio condition?
@siggyretburns7523
@siggyretburns7523 Год назад
So how much are we looking at, roughly, to have all that torn down, replaced, and reinstalled?$1500 - $2k?
@SouthpawAutoworks
@SouthpawAutoworks Год назад
That's gonna depend on a lot of things; stock parts vs upgrades, part of the country you live in, etc. Best bet is to contact some shops that are local you, and get some estimates. Love your channel name. Too funny.
@siggyretburns7523
@siggyretburns7523 Год назад
@@SouthpawAutoworks I just got it out of the shop Monday.total damage $2305 R and.R trans Repair torque converter Replace cooling lines Fluids
@davidmuir3820
@davidmuir3820 Год назад
that guy acts angry, he always throws everything
@tedkay5272
@tedkay5272 Год назад
Why is it called a low/reverse band? I thought it was only applied for reverse?
@SouthpawAutoworks
@SouthpawAutoworks Год назад
Great question. That band is also applied when the trans is shifted into Manual Low (aka manual 1st gear). With the shifter placed into Manual Low, several positive things happen: 1). Line Pressure increases. (This is the oil pressure that's used to apply clutches/bands). 2). Clutch capacity increases. (Low/Reverse Band is applied...assisting the Low Roller One-Way Clutch) 3). Engine-braking enabled. (Deceleration, maintaining safe speed when towing down-hill, etc). Subjecting the trans to higher loads (such as towing, performance applications, etc) increases the likelihood that the clutches, and bands, may slip. When they slip, they create heat, and burn up the paper lining on the clutch plates, and band surfaces. This results in transmission failure. Increasing line pressure, and clutch capacity, reduces the chance of the transmission slipping. If you're interested, we could put together a video on TH400 power flow, and show how all of this stuff works....as time permits. For the mean time, we've already got a couple videos on power flow...for the 4L60E. 4L60E Power Flow (1st, 2nd, 3rd, & 4th Gear): ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IfOqbTqKubE.html 4L60E Power Flow - Manual 1st, Manual 2nd, & Manual 3rd: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6kfAuXJFYFE.html
@tedkay5272
@tedkay5272 Год назад
@@SouthpawAutoworks Thanks for answering. Now I understand. I am more familiar with the 4l60e. That was a great video on power flow. I am sure we would all appreciate a similar video for the 400 or 4l80e.
@papergatorzfedducca7998
@papergatorzfedducca7998 11 месяцев назад
What year is this th400 and how can I identify one? I been seeing a lot of these for sale as cores. I was thinking about buying them and rebuilding them but I don’t know which is the best ones to buy (if they have good years and bad years). It’s so hard to find 4l80e in my area. And if you find one it’s expensive.
@SouthpawAutoworks
@SouthpawAutoworks 11 месяцев назад
This is a strong unit. I don't know that I'd be too concerned about year. There are different bell housings for this trans. Chevy, BOP (Buick, Olds, Pontiac), and I wanna say AMC, too (Jeep). I can't remember if we uploaded any video content on the difference between Chevy & BOP case/bell housing. Point is, I imagine that there would be a lot more people seeking a Chevy-style TH400...for their chevy car/truck. You'll have to evaluate your particular market, to get a feel for what would be best. Just my two cents...
@LADASZAMARA-r6t
@LADASZAMARA-r6t 2 месяца назад
nagyon sokat tanultam de a spiralmeghajtot sokkal konnyebben kiveheted 1 regi kilometerspiral anya es egy csinalt te alaku 8mm -es vas ket alatet egy kis hegesztes vigyazz a anya elolvad es nagyon csipem az ami vagdalozast es is rossz meg azis rossz
@TheMizzlefish
@TheMizzlefish 7 месяцев назад
Please help me out👇
@osvaldocolon9711
@osvaldocolon9711 10 месяцев назад
Don't impress me at all . There a few thing as you disassemble let your viewer know .
@SouthpawAutoworks
@SouthpawAutoworks 9 месяцев назад
I'm open to constructive criticism. However, I'm having trouble understanding your 2nd sentence...
@cockasorrus7475
@cockasorrus7475 2 года назад
Hey fellas just watched the tear down. That center support bolt is a definite nice mention. Especially the socket that removes it. I always forget to do it but to break Andy’s balls. The end play to be checked before tearing down. Thank you for the hard work!! I’ll be scrutinizing!! lol Nice tip on the kick down removal with 11/16 box end. Thank you for highlighting the case snap rings. I think I put a case saver one in? Years ago….
@SouthpawAutoworks
@SouthpawAutoworks 2 года назад
Good eye, man! Haha Yeah, we forgot about that... Easy to forget stuff when the red recording light comes on. Thanks for checking it out. Appreciate you dropping us a line!
Далее
Тренд Котик по очереди
00:10
Просмотров 220 тыс.
БАГ ЕЩЕ РАБОТАЕТ?
00:26
Просмотров 226 тыс.
TH400 Build Series - Building Clutch Drums
41:39
Просмотров 18 тыс.
JUST BUILT Th400 10 minutes of run time.
18:04
Просмотров 813 тыс.
GM TH400 Automatic Transmission Rebuild For Dummies
1:07:42
Check out my Turbo 400 with LS engine
24:21
Просмотров 11 тыс.