The 10 Upgrades I Install on EVERY Klipper 3D Printer

Подписаться 126 тыс.

Просмотров 96 тыс.

50% 1

In this video. I talk about my 10 Must-Have Klipper Upgrades. Brought to you by Sovol, makers of the SV07 Klipper. Check out jle.vi/sovol and use the coupon code NEXTLAYER at checkout to save $10-20 (on orders of $259 or more).
So you're running Klipper on your 3D printer. After all, all the cool kids are doing it.
But now you're wondering, what's next? In this video I'm going to share with you my nine (actually ten) must-have Klipper upgrades to get the most out of this incredibly powerful firmware.
💬 JOIN MY DISCORD: jle.vi/tnl-discord
🎁 EXCLUSIVE CONTENT ON PATREON: / thenextlayer
🎥 IN THIS VIDEO: 🎥
00:00 Introduction
00:25 Background
02:08 Upgrade No. 1: Klipper Backup
03:24 Upgrade No. 2: KIAUH
04:18 Upgrade No. 3: Mainsail
06:11 Upgrade No. 4: Custom Macros (Print Start, Print End, Load/Unload, Clean Nozzle, LEDs On/Off/Status, Take Snapshot)
08:43 Upgrade No. 5: Exclude Object
09:41 Upgrade No. 6: KAMP
10:25 Upgrade No. 7: Obcico / OctoEverywhere
11:39 Upgrade No. 8: Timelapse
12:27 Upgrade No. 9: gPhoto2 + GCode Shell Command (Optional)
14:36 Upgrade No. 10: Klipper Screen
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits | jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
🔗 OTHER LINKS 🔗
👉 Obico: jle.vi/obico
👉 OctoEverywhere: jle.vi/octoeverywhere
👉 BigTreeTech: jle.vi/bigtreetech
👉 ModBot's KAMP explanation & tutorial video: • The FUTURE Of 3D Print...
👉 JJ Shankles' Octolapse tutorial video: • Klipper Timelapse is E...
👉 klipper-backup installation instructions: github.com/Staubgeborener/kli...
👉 KIAUH installation instructions: github.com/th33xitus/kiauh
👉 Klipper Exclude Object Feature - setup and configuration: www.obico.io/blog/klipper-exc...
👉 gPhoto2 + GCode Shell Command tutorial video from EB3D Printing: • Mainsail Timelapse Set...
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: / @thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: / thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: kit.co/jlevi
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #klipper #3dprinter

Наука

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 97

@thenextlayer 10 месяцев назад

Hey! Thanks for watching :) I'd love to hear what you thought of this video, and if you liked it, don't forget to smash that Subscribe button...

@monicoinkpen7899 10 месяцев назад

Any chance you could show us how to install klipper?

@CaptainCohiba 3 месяца назад

For the people watching this in the future: Exclude Object and Adaptive Meshing is now NATIVE implemented in Klipper. You just need to enable them in your printer config!

@tomaszkarwik6357 10 месяцев назад

I think the most important upgrade of kilpper is changing the root password

@thenextlayer 10 месяцев назад

Good point!

@geauxracerx 9 месяцев назад

You should do that in the install part of RPi OS. Click the gear that will open a dialogue that will let you set a custom url for your local network. I use the name of the specific printer. It will also let you input wlan info, and set a user and password all will be baked into the RPi OS install.

@jerbear7952 7 месяцев назад

What did you change it to?

@tomaszkarwik6357 7 месяцев назад

@@jerbear7952 hunter2

@minusmartin 7 месяцев назад

@@jerbear7952 yeah we all gotta have the same password. also i’m looking for the best upgrade password for my system

@jeffdavenport469 4 месяца назад

Another Macro that goes by the way-side by most companies factory installed Klipper: M600 / color change. Once up and running you just have to add it in your slicer.

@geauxracerx 9 месяцев назад

If you don’t install Klipper screen you can VNC into the RPi and use the copy sd card utility to manually back up your entire sd card/drive. Having a local copy is the best practice, as sd cards are prone to failure due to power cycles. Takes a few seconds to swap out a corrupted/dead sd card

@jeffdavenport469 4 месяца назад

Installing klipper screen on the SV-07 will brick the printer. Sovol uses a custom FW / fork of klipper for their MKS pi/ pad 5. I have the 07 and the 07 Plus.

@geauxracerx 4 месяца назад

@@jeffdavenport469 I feel Klipper screen is a huge mistake. It kills 98% of the Pi’s functionality. Like being able to make a 100% backup of your setup. I use an iPad with all my printers in its own tab in password/biometricaly locked Brave browser. There is zero need for a screen on the printer, ZERO. It just adds more headache to the process

@joeking5211 3 месяца назад

@@geauxracerx I would GREATLY appreciate how to do this. VNC being a remote control I can't get my head around how. I use naturally ssh and also winscp to access files on the pi, can you use that to do the backup ?. Is the back up a bare metal image backup such that the file you transfer to your PC is an exact image of the sdcard. As you can see, easy to say this can be done, but I don't see how ???, any chance of a tutorial or reference to a YT vid that actually 'does it' rather that say it can be done. Rgds.

@geauxracerx 3 месяца назад

@@joeking5211 to VNC in first you have to Sudo raspi-config ( can be done in SSH ) Down to 3 Interface options Down to I3 VNC enable Save reboot. VNC is now enabled and you can use VNC Viewer to have Remote Desktop access On the Desktop in the taskbar click the Raspberry/ down to Accessories/ SD Card copier. This makes a 100% copy of your main sd that you can just pop in should your main one stop working, as they are very prone to do. You can have that first one, or work in a routine where you periodically make a backup. This is how I do it as it keeps it as up to date as possible. I shoot for once every couple weeks. I just reformat the backup sd card and create the new backup. It’s really fast considering it’s making a complete copy.

@chris3dp 10 месяцев назад

Very cool video, thanks a lot.

@makkeleonslachthuis2853 10 месяцев назад

great video and good sound Thanks👍

@thenextlayer 10 месяцев назад

Thanks 👍

@benferrara4121 Месяц назад

this man really just said your life is at work 🤣 But really, thanks for the video! just thought that line was funny

@djispro4272 10 месяцев назад

I have finally got Klipper to run properly, and I have already installed OctoEverywhere, so KAMP is on my list!

@TAJPEJ84 6 месяцев назад

Thanks for the video!👍

@thenextlayer 6 месяцев назад

No problem 👍

@mgreb 5 месяцев назад

I am running the Sovol klipper upgrade on my sovol v06 plus, and I cannot get the exclude object to work. tried to upgrade to the latest version of clipper, but it bricked the computer , had to go back to sovols version

@DeepfakeKittens 10 месяцев назад

This was very helpful! I just swapped my printer over to Klipper and felt a little in over my head on the basics. Appreciate the content

@thenextlayer 10 месяцев назад

Awesome, I appreciate you

@drrandom1259 8 месяцев назад

Has anyone upgraded a sovol sv06 with a raspberry pi4? I'm currently running octoprint on a raspberry pi 4 and i want to switch to klipper. I heard that i must update my firmware on the sovol as well on the raspberry pi. In my understanding i must update to a new firmware on the sovol Install mainsail OS on the raspberry pi Will my sovol sv06 screen work after that? Should i add a new screen? Should i instead buy the new klipper screen for the sovol sv06 and ditch the raspberry entierly? Thank you very much!

@therick0996 10 месяцев назад

I installed klipper about 10 months ago with no screen, and recently added klipperscreen. Absolutely awesome

@thenextlayer 10 месяцев назад

Yep!

@TheButchersbLock 10 месяцев назад

Great video mate, more Macro stuff please and thank you 😊 Oh and maybe Klipper trouble shooting

@thenextlayer 10 месяцев назад

Good suggestions, thank you! Keep them coming

@SerenityGuitars 10 месяцев назад

Not sure klipper is for me but thank you for the great info.

@MikeloiML 7 месяцев назад

hi i loved this video, i added exclude object and kamp, but none of them work

@JoelCHopper 10 месяцев назад

for KlipperScreen, I use Debian on a old Microsoft Surface. It works really well and is big enougo to be seen from anywhere in the room.

@AutoRevLife 6 месяцев назад

Did you connect the Surface tablet directly to the pi USB? Or did you need another plug in to make it work?

@dekurvajo 5 месяцев назад

I am watching this even before i have a klipper installed. Thats how i know i am doomed

@lucio_costa 7 месяцев назад

Very well-done video. Can you share your macros? I want to add them to my K1Max. Cheers.

@marknewsom1377 3 месяца назад

how do you install these plugins if you dont have a rasberry pi? i have the ender 3 v3 ke and i have already rooted it and installed moonraker,mainsail and octoapp with octo everywhere but i would like to use some of your upgrades in this video.

@mpmachining7227 10 месяцев назад

Thank you so much for this! I have heard mixed things but can these upgrades be done on the Qidi X-Max 3 also? Mine comes in next week and I don't want to start making changes if the firmware will reject them. Thanks again!

@thenextlayer 10 месяцев назад

NO! Don’t touch klipper on the Qidi machines or you’ll brick them!!

@mpmachining7227 10 месяцев назад

@@thenextlayer that was what I had heard elsewhere but thank you for confirming before I did something stupid!

@geauxracerx 9 месяцев назад

Really lame when corps lock down open source software 👎

@TheTrewdat 7 месяцев назад

Was there a specific GitHub that you got your macros from or did you learn to write your own?

@iankoegelenberg4682 10 месяцев назад

Very cool video, thanks a lot. Any possibility of a video turning/ flashing a Sonic Pad into a full fledged klipper setup?

@geauxracerx 9 месяцев назад

The sonic pad is a full fledged Klipper install. You just need to make/install the specific firmware and config file for your printer. Then connect the printer to sonic pad with appropriate usb cable

@Iisakkiik 10 месяцев назад

Nice video! Unfortunately it's missing the latest klipperi hotness: spoolman, the new filament manager. Didn't manage to install it yet myself, so I was really hoping for it to be in this video.

@thenextlayer 10 месяцев назад

Haven’t heard of it. Will check it out.

@MallocArray 10 месяцев назад

@@thenextlayerthis is content I would be interested in!

@sloshedmrbones 10 месяцев назад

Where can I get the information to convert my printer to klipper. I feel like I can get much higher speeds and was recommended klipper to do so.

@rongerber2970 4 месяца назад

funny that the camera of the sovol fell down 0:40 xD

@thekidd2323 5 месяцев назад

Just use a old phone or tablet. Cheaper and probably have a drawer full of old phones. Much better too than the klipper screen as you get the full web interface, plus connect all your printers to that interface so you only have on screen rather than 5-10-20 depending on your set up. Touch screens are great for single set up or even two printers but when you get into small game status, it’s a lot nicer to have a single HMI rather than one for each machine. If you’re from the manufacturing world have a HMI for each makes sense but not in 3D printing.

@dt08jh8 10 месяцев назад

Great video! You production quality is getting better for every video! I think it would have been worth mentioning that klipper and octoprint is not mutually exclusive (see octoklipper), one is after all a firmware and the other is a front end, I felt it was a bit unclear sometimes in the video what Klipper really is and what moonraker/mainsail/fluidd is...

@thenextlayer 10 месяцев назад

That's a good point, but in my opinion putting Octoprint on Klipper instead of something cleaner and more stripped down like Fluidd or Mainsail kind of defeats the purpose a little bit... don't you think?

@thenextlayer 10 месяцев назад

Oh and good point about the differences, I didn't explain that. Thanks for the feedback

@dt08jh8 10 месяцев назад

I totally agree on that, just thought it might have been worth a mention in case one wanna go from octoprint with marlin and keep the familiar plugins. I would of course still recommend mainsail/fluidd with the plugins you mention in the video any day of the week @@thenextlayer

@lap87 5 месяцев назад

You should make a new video regarding KAMP meshing feature now being a part of klipper itself, only requiring the setup of [exclude_object] and adding one new setting to [bed_mesh] in printer.cfg

@EsotericArctos 4 месяца назад

I love Fluidd, but I have a slight preference for Mainsail. I use a Raspberry Pi Version 1 camera, and I found installing both Fluidd and Mainsail together caused it to stop working so I had to go one or the other, but Mainsail and KlipperScreen provide an amazing UI on the printer, with a very functional remote interface also

@LuckyPrinter 10 месяцев назад

Super with an episode on Klipper🤩, do I dare to ask for more Marco stuff? YES please😀

@thenextlayer 10 месяцев назад

I'm not a macro master (yet), but, good idea :)

@SynthaPak 10 месяцев назад

So do you like mainsail, fluid, or octoprint after having used all 3?

@thenextlayer 10 месяцев назад

Mainsail

@Enjoymentboy 4 месяца назад

I like the idea of macros but sadly setting them up just doesn't work with the way my brain does. One that I'd love would be to restore a failed print. I'd love to just select a file and tell it to start at a specific layer or height without having to go in and edit the gcode and hope for the best. If i can see on the display that a print failed at 16.4mm I'd love to just restart the print and tell to start at 16.4mm. Absolutely no idea how to even start something like that though ... I'm like steve jobs that way. I just come up with the great ideas and wait for someone else to figure out how to do it 😉

@leopoldogastel 10 месяцев назад

Great video very interesting. How hard would it be to jailbreak a Bambu lab and install klipper? Would it even make a difference? Regards from Milan, Italy

@thenextlayer 10 месяцев назад

Currently considered impossible and I wouldn't do it anyways...

@firelion98 10 месяцев назад

@@thenextlayer yup^

@RobytheFlorentine 10 месяцев назад

hi your videos are very usefull. Thanks. Regards from Florence, Italy

@thenextlayer 10 месяцев назад

Thanks for the kind words! Really appreciate it.

@papassotirios2061 10 месяцев назад

Have anyone instaled kiauh on the sv07? I cant find the sd card to flash it

@thenextlayer 10 месяцев назад

You don't need to flash it, SSH in

@papassotirios2061 10 месяцев назад

@@thenextlayeri dont have the ssh password

@HairyStuntWaffle 9 месяцев назад

Where can I find that wall covering?

@thenextlayer 9 месяцев назад

I did a whole video on it!!

@agatasoda 10 месяцев назад

I swear the panny d advanced Klipper development by like a decade.

@technicallyreal 10 месяцев назад

When I made the switch to Klipper I thought I would miss Octoprint plugins.. but it turned out that everything I used to need a plugin for was already built into Klipper and/or Mainsail (and done even simpler and/or better).

@thenextlayer 10 месяцев назад

Bingo

@the3dhermit 9 месяцев назад

the github auto update package is a bitch to install on Raspberry Pi too, so dont feel bad. I keep getting the message that it was all done successfully, but when I check the repo, there's nothing there

@DCUOChaosDynasty 7 месяцев назад

power lass ?

@GuidoHendriks1990 10 месяцев назад

Ah that's indeed the Morley length.

@TouchWorld3G 10 месяцев назад

Why do you have short hair on the thumbnail?

@thenextlayer 10 месяцев назад

I have a library of photos with poses. I need to update it lol.

@spamspasm8183 7 месяцев назад

To demonstrate the 0.0001mm nozzle hotends embedded in his scalp.

@jjptech 3 месяца назад

You are missing Telegram Bot

@leonnundel2443 2 месяца назад

Don't forget Klipper screen on old android phones so you can use your old dusty tech for good

@Megamannen 2 месяца назад

I listened to the cool kids and switched from Duet with RepRapFirmware to Klipper... don't recommend it at all, felt like a downgrade... Will be switching back after I get a CAN 36 toolhead that supports RRF. RepRapFirmware + Clearer documentation + Easier upgrade and setup + Everything is a g-code, and no restarting of firmware for every little change - Less cool kids - Pricier if you go Duet brand