The DIY ANSWER to OLD Paint Removal!

Подписаться 552 тыс.

Просмотров 216 тыс.

50% 1

In this video we show you two methods for old paint removal. Both options work fantastic, hit the play button to see which option will work best for your project!
🟢CHECK OUT OUR ONLINE STORE🟢
www.amazon.com/shop/paintsociety
Products in this Video:
SANDING:
Dewalt Sander: amzn.to/3LcaWGr
6'' Backing Pad: amzn.to/3HqvhFQ
6'' Interface for P180 Sanding: amzn.to/3AYJ9ov
P80 Grit MAXFILM: amzn.to/332Y2cQ
P180 Grit MAXFILM: amzn.to/3sCsAuT
Contour SCT Tool: amzn.to/3D9V1GM
40 Grit Drum: amzn.to/3eQDUAm
PRIMER:
Gray Epoxy Part A: amzn.to/3rCUTdn
Epoxy Primer Catalyst Part B: amzn.to/34ErKp3
Reducer: amzn.to/3GBaTRm
Primer Gun P500: amzn.to/3GqwGuJ
Mixing Cups: amzn.to/34ctENT
Cleaning:
Pre Painting Prep: amzn.to/3osbuhQ
Cleaning Towels: amzn.to/3rshTvi

Авто/Мото

Опубликовано:

23 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 210

@Zenkai76 Год назад

I want to thank you, I have never painted with an HVLP gun before but I have watched a lot of your videos, everything from how to setup your gun to doing clear coat. I actually found your channel when I was researching a rattle can paint job for my farm truck. You gave me the confidence to try HVLP and I painted my truck the other day and it came out even better than I hoped! THANK YOU for your time and energy on training us novices!

@PaintSociety Год назад

Awesome. So happy to hear your successes!

@mannycarrillo5431 Год назад

Hello y’all I seen you used the iwata ws400 series 2.I wondering where you got it because I can’t get one sent to the states. Please let me would be much appreciated thank you

@N8QNJ Год назад

I used a drum sander on my restoration and I agree the disc was faster, however the drum was more controlled and the metal was a beautiful finish when done. I was removing 6 paint jobs on this car and this was a great way to get off all the paint. I used the Summit Racing version drum sander because it has a vacuum port. I used a shop vac with my dust deputy on a 5 gallon bucket and kept my entire garage clean. Without this it would have been very dirty process. The combination of the drum sander and the dust deputy was an inexpensive way to do this and not get dirt everywhere. Highly recommend the drum sander when removing all paint.

@mrV1et Год назад

I bought the harbor freight Bauer version of that eastwood sct for $119 sale. Works great to strip down my hood and roof without going through a bunch of sandpaper

@BengyM Год назад

Did you use 40grit drum?

@mrV1et Год назад

@@BengyM I believe so . It’s the roughest one out of the three that comes in the box.

@Zzeke Год назад

Love you no nonsense videos. Great presenting style. Thanks Brian

@Patrick94GSR Год назад

I started sanding my Integra hood to prep it for wrap, and ended up finding up to 5 layers of paint on the hood! I ended up using my old Porter Cable 7424 DA polisher/sander with a 5” Velcro backing plate, interface pad and 60 grit discs to get the job done getting the paint off. Was pretty messy but I worked outside in open air and it wasn’t too bad.

@genuinejake9851 Год назад

Ive been seeing many using a sanding disc on a rotary polisher with very good results. Makes use of a tool you may already have and does seem very efficient.

@chrisguzman7926 Год назад

What about with a random orbital?

@lvlikeyV 8 месяцев назад

They make the roller on the sct in a 4.5" grinder attachment. Works well with same level of dust control.

@danielmcqueen1024 6 месяцев назад

The Contour SCT drum sander is my Go To tool for paint stripping, did my 2004 Crown Vick LX Sport which is a Huge car in a little over 4 hours. Then used an orbital with 180 to refine the scratches. Then used the Eastwood roll-on sealer and then primer with Awsome Results for this Week End Worrior :) I finally got a big air compressor so now the Crown Vick LX Sport will be repainted in original Chestnut Brown :)

@2koolforyou88 Год назад

I recently did this over the weekend but I used chemical stripper and the use of these tools as well had painted my hood years ago with 1k products and it was clogging up my paper but eventually got it to metal and dtm high build

@bradmaas6875 Год назад

Bought an SCT earlier this year, I love it. That said, in tighter areas it's limited.

@fraserfab68 Год назад

Thanks for the comparison. In my experience the SCT works much better when stripping multiple layers and or thick filler. Although I have not used that DA I have used other 7" sanders and they always seem to take forever with 80 grit tempting me to use 36 grit which isn't exactly smart either. The dust is also a factor and I can do entire vehicles with one drum.

@WildAzzRacing Год назад

Awesome! I've been wanting some vids covering from bare metal and up on a larger scale. Thanks!

@milscervantes726 Год назад

I appreciate this vid alot ! I'm stripping and wrapping my car myself so this made me so much more confident. I just have one question. How often do you have to replace the drum on the SCT? I'm working on an 01 Integra

@ScatPackRob Год назад

Great comparison. Thanks Brian.

@alirazmjou2149 Год назад

Thank you so much for this video سپاسگزارم

@toyotatundra0455 Год назад

Brian, in one of your videos you talked about how a bumper paint cracks if it's not prep correctly. Can you do a videos on how to remove Cracked paint from a bumper? I'm really enjoying the new serie of short videos. Take care.

@harbortim1 4 месяца назад

Great video. I learned something.

@derrinpickett9948 2 месяца назад

Use the rotary sander to knock the paint off about 60% then use the SCT to finish up. I use a cheap box fan to blow across whatever panel I'm stripping to help keep metal cool and also to blow dust.

@KundelCrane Год назад

Nice work there. Great comparison 👍🏼👍🏼

@northwestoff-roadopportuni7176 Год назад

Great comparison! Thanks

@jimfeaster4837 Год назад

Great tips!

@bigchrisb59 Год назад

That comparison was awesome. Been debating buying the Bauer drum sander for a few household projects. But after this video I'm gonna save and buy the eastwood model. Big thanks

@charlielong262 Год назад

Everything I've been able to read has me convinced the Bauer and Eastwood SCTs are the exact same tool with different color plastic. The drums are interchangeble. I picked up the Bauer to strip the sheet metal base of a bandsaw I'm restoring, and it worked really well. Beyond my expectations.

@bigchrisb59 Год назад

@@charlielong262 sweet thanks. I'll probably pock up a Bauer this weekend

@MidnightOilsRestoration 3 месяца назад

I think I’ll grab a Bauer drum sander also, I’ve got several of their tools and all of them have been great!

@suzukakias1000 Год назад

your videos are very helpful ,thanks. restoring question...striping down paint on e30 industrial paint stripper or sand down with DA and sander? i ruled out sand blasting since most say it warps the metal and you can never get all sand out of cavities.

@Dutch-vj2eg Год назад

Brian, I had been using a HVLP guns for years. Lately more for spraying finish on interior doors and I am building some mudroom closets which I am spraying with oil-based paint. I was quite ignorant about setup and cleaning until I stumbled on your channel. Greatly improved my results! But I am struggling with getting the viscosity right for these non-automotive finishes. Can you comment on this, how to get the viscosity right for an HVLP and/or point to some good tools to measure/estimate viscosity?

@markbarton4344 Год назад

Each tool has it's perks.

@everzamora9031 Год назад

Great video. Any chance you can make video on fixing aluminum hoods that went through an engine bay fire. But still restorable. It warped in some areas. A body shop gave me a ridiculous quote to fix it. They said they would have to do heat and cold shrinking etc. That's why it was so expensive. But I didn't go through with it.

@marenghi123 3 месяца назад

Great videos from this paint society. You make it look easy. I like the finish from the from sander. What abrasive on the drum sander would be ok to go straight into epoxy ?

@StanyCarteny Год назад

great work!!!!

@mandofreskoo Год назад

The SCT cuts cleaner, but I had no regrets after buying my geared Snap On sander similar to the dewalt. Stripping those toyota 040 and 070 recalls were a pain with the sct cause it's heavy.

@PaintSociety Год назад

Oh yea man. If you are doing those warranty jobs, you know all to well what works the best. I gotta try that tool

@jassonco Год назад

A little late to the party, however, this tool is the next best thing to, chemical stripper, which was forbidden by the guvment. We do lots of classic restos, and the SCT is the shit, for stripping cars in a day, without the hazards or chemical or complete mess of media blasting, which can change the properties of metal. We also do late model collision and I'd think twice and a third time about using any rotary tool, on current vehicles. The old Aircraft Stripper original formula was very useful.

@CountyGarage207 Год назад

I like the SCT tool better. We recently bought the Bauer version at Harbor freight, and it seems to strip the old lacquer based paints much quicker than the DA.

@DrFiero Год назад

I just bought one of those “SCT style” sanders after seeing you use one on (the Yukon?).

@mohamedelmicheli7301 Год назад

I've got one with a hoover it's quick and less dust

@jonathanharrison1009 Год назад

I used a drum sander to remove all old paint and rust on a very old vehicle. The electric sander that I use didn’t remove as efficiently in that instance. Both serve purpose.

@67scout73 Месяц назад

Thank you for the priceless education! Before I strip the paint off my NB Miata hood and trunk lid, I want to ask if I need to be mindful that the hood is all aluminum. Are there any "dos" and "don'ts" specific to this aluminum hood? Thank you in advance. Keep the vids coming, they are so helpful.

@fireman7875 Год назад

I have learned so much from your videos! I’ve been wondering about the most efficient way to strip paint so this one was right on time. Have you done any painting with a turbine system? I have a 4 stage that I was thinking about painting my truck with. I am interested in needle size selection and thinning requirements.

@PaintSociety Год назад

I haven’t done any Turbine painting but have a few videos

@officialmgz9120 Год назад

I know what I know because of this channel🔥🔥🔥

@arielbenyahya4363 Год назад

i try to order your shop manual, but the site is showing error. i would be glad to have manual excellent information thank you great job.

@drrock5356 Год назад

Any tips for sanding the paint off of an aluminum hood? What about the base primer for the sanded aluminum surface?

@RossWilliamsDC 4 месяца назад

I prepped and painted my 1990 Toyota pickup with Eastwood's black epoxy primer. It came out great. I liked the color so much I decided to just spray Eastwood's European 2-part Clear directly over it. It also came out awesome.. Unfortunately, it was a big mistake. In a little over a year, all the clear started flaking off. The primer and clear are not compatible. Now I have a big flakey mess. Do you have any thoughts about how to get all the clear off without damaging the primer coat? Aircraft stripper maybe? Thanks.

@fakdaddy75 Год назад

can you use those paint removal stripping discs on a grinder if you dont apply too much pressure - to to maybe take off the top 1-2 coats

@zak4477 Год назад

Bryan, i know you paint mostly hondas but have you ever sprayed the mazda color soul red crystal metallic? its a color im super interested in trying but everything ive read about it leads me to believe its a very complicated color to get right. Probably one of the prettiest red colors ive ever seen on a car in my opinion.

@dannyboi9197 Год назад

How do I figure out if I should completely strip my car paint to bare metal vs sanding down clear coat and painting over old paint?

@danrussell3439 Год назад

Great video

@andrewgad9430 Год назад

Im painting my classic car “Jet-stream blue” from the C6 corvette.. do I use a white or light grey primer?

@erice5429 Год назад

hi... Hey, question, can you remove the paint with some chemicals, if so, what are the pross and cons? Thank you

@mr.z3703 Год назад

Brian, was curious if you knew how to purchase a paint mixing system with the toner’s, scale, and everything. I haven’t had any luck on finding how to purchase one. I’m not too picky with brand, just as long as it’s a good one. I know the most about ppg, as the shop I was in had ppg. But def open to others. Thanks.

@nolandunn1110 6 месяцев назад

I’m currently stripping my engine bay with a 2 inch sanding pad for weird spots and a sct 6:54 and a plethora of other tools but how do you make sure not to start taking away metal… I tested the sct on a test piece and it was taking away metal…is it all about rpm and keeping it moving?

@LaserEcoCleaningLtd 4 месяца назад

Nice work with taking paint of !! Did you try laser to strip the paint?

@jacksyx9503 7 месяцев назад

In the video what type of John, did you use? The most chores are the 120 grade?

@flatrockfiend Год назад

Just curious what speed setting were you using on these tools???

@sweetpea7292 5 месяцев назад

I have a classic car that has that all over even worse than this car to the point the paint has started chipping off. The previous owner was spraying primer on the worst spots to prevent rust but I’d really like to get it all one color for now till I can get a pro paint job, if possible. Would doing something like this before painting damage the body? Or should I just sand as much roughness away as possible and spray over the grey primer for a quick fix?

@ro63rto Год назад

Cool tool

@michaelvalone907 10 месяцев назад

Could you have used paint stripper to get the same results but without the dust and mess?

@anthonygonzalez7337 Год назад

Can you sand down to metal with 80 grit by bare hand, if time is not a factory and it's just a project car? Or is it too much to do by hand and this tool is necessary?

@roycebrown3447 Год назад

I'm not sure if this an apples to apples comparison. The SCT has many different drums including an 80 grit drum. It also has a few different speed settings. Unless they changed it you appear to have it set well below max speed. It looks to me like you have it set around 3-3.5? Mine goes up to 6. I run it at 4.5-5 and it blows dust everywhere but I stripped a 1969 coronet hood clean in 20 minutes. That was with the black paint stripper drum. Also, at that speed I didn't need to apply additional pressure. The weight of the tool did the work. I think a better comparison would be to increase the speed and use the same abrasive on both tools.

@PolishAluminum1 Год назад

On the drum sander, what grip did you started ?

@wolfe2118 Год назад

I got halfway through stripping some 64 impala fenders with the Harbor freight version of the metal conditioner before I realized I had 55 gallons of methylene chloride in my powdercoat room, the HF tool works but it's so slow.

@rolengoldslick9053 Год назад

what about an angle grinder? flap disk vs paint tripping disk?

@b00sted_SS Год назад

Harbor Freight sells a drum sander, same as the Eastwood setup

@millin2222 Год назад

Would these tools be good to use for raptor/bed liner??

@DR-UTAH Год назад

I have a question my truck got painted 2 days ago and it is going to rain tomorrow. Will the rain damage the new paint?

@T3glider Год назад

Nice guyliner! (I know it was the paint dust!)

@Juniors_bodyshop Год назад

Not only do I learn a lot form your videos I enjoy the videos man 🤛👊 I just had a quick question how do u sell like merch such as tools sandpaper on your webiste?

@PaintSociety Год назад

I have an Amazon store on my description

@SpankMyFace Год назад

They need to make a drum sanding attachment for angle grinders. Most non-generic angle grinders have removable spark guards and multiple mounting points for different handle orientations. Maybe there are patent issues, or the demand is not high enough for somebody to produce this attachment yet..

@user-kb2qd5dn6r 11 месяцев назад

Thank you for sharing knowledge ,but you didnt tell us how to clean the metall beffor we spreay the primer

@johngrant1337 Год назад

good video

@lazyhoundracing9621 Год назад

What about using the D/A for the heavy work followed by the drum for finishing?

@PaintSociety Год назад

You can do that.

@angelmorales220 Год назад

Nice video

@craigzee3652 Год назад

Hey Brian, love your videos! I have a very stupid question. Why not use a paint stripper seems like a lot less work? Is there any benefit of using a sander?

@PaintSociety Год назад

You definitely could but this was a physical strip video

@tobygathergood4990 Год назад

What about appropriate media blasting or chemical stripping? How do they compare to the two tools featured here.

@gol10dr45 Год назад

He has a video on that. There is a reason shops do not use chemical stripping. Too messy takes longer, and use to be very hazardous.

@JeckGun Год назад

nice one

@richardbenson4750 Год назад

they make multiple drums for the contour sander so if you want faster then maybe use a rougher drum? BTW, great video like always.

@PaintSociety Год назад

Richard. I used 40 grit. I assume the coarsest.

@miriamvivo4279 Год назад

1999 toyota rav4 defective oem clearcoat . All coming off

@PhillipHall01 Год назад

You left out the best manual stripping option; the 4 1/2" Polycarbide Abrasive Wheel which looks to be made of a similar Material as the ‘ drum ‘ striper. Much less chance of heat build up and warpage than the sandpaper disc. While leaving clean smooth metal exposed as desired. Phillip Hall

@Kryndon64 Год назад

By far the most effective, but it disintegrates astoundingly quick. I used a wheel like that on my angle grinder (12k rpm) and I got a VERY small portion of metal cleaned up from factory paint. The wheel became very worn at the tip and slanted towards the centre, so you could no longer use it in any meaningful way while still having a bit of materiial left. The wheel cost me $5 but based on the surface area it cleaned, it's too expensive. If you're a shop and need to strip cars super quick and you got the money, by far it's the best. But as a budger DIYer it's not a feasible option unless you get like 100 diiscs for a super good price.

@PhillipHall01 Год назад

@@Kryndon64 That is true if you do not lay it flat like a sanding wheel the edges will wear pretty quick.

@potsy9973 13 дней назад

New chem strippers do not work as effectively as the old stuff but in the long run its the best way to strip and doesn't change the metal or damage it in any way. Especially if working with softer metals like aluminum. And of course chem is dust free.

@chrismechanic6164 Год назад

Wow. I haven't seen crows feet since the days of lacquer automotive paint.

@nuclearbum9858 Год назад

bought one of drum sanders and tried to do a hood i gave up its heavy and it wears you out fast and takes forever plus those drums are expensive oh and its noisy ..

@xxxnobodyxxx64 11 месяцев назад

Curious question: are there no paint strippers that can be applied heavily and saves a lot of the surface?

@ericcartman8716 7 месяцев назад

Yes but they are expensive

@Formulabruce Год назад

Ever use sanding screens?

@mre912 Год назад

Good video Brian. My only thought is those other sanders are like 300$ and it's 60$-100$ for the drums on them. How much can actually be sanded with one drum?

@really2359 6 месяцев назад

Through Eastwood everything is expensive. I got a set of seven drums off Ebay for $20 and they work great.

@mznix1971 Год назад

I don't think I have seen a video talking about this, and wonder how long you can leave a primer before it needs the base coat? asking cause our project is primed, but now the base coat is backordered and won't be in for 2 months!

@PaintSociety Год назад

Should be fine just give it a final sand before base

@Imwright720 Год назад

I need to strip my ford aluminum hood. Is this going to be safe enough to not warp it for a beginner.

@PaintSociety Год назад

Yes just let the machine do the work

@moefly14 Год назад

Have you ever used chamaeleon product? Its extremly cheap and works fine. You should check it out and mayby do a review. Used their 2k acrylic primer and workt perfect. Got one liter for just 19 dollars including hardner

@miceinoz1181 Год назад

Brian, surely chemical stripping is the best option for a job this size? I would not want to use the rotary sander, you can have gouges everywhere.

@dand3975 Год назад

I used chemical stripper out side on a Camaro hood, that stuff was nasty and gave me a wicked buzz. Sanded the rest of the car to bare metal with a air d/a & 80 grit. Never used chemical stripper again.

@nzuncovered1845 Год назад

I have heard you should etch prime before you lay filler, other people say not to. What do you think?

@PaintSociety Год назад

You can epoxy primer before filler. Either way should be fine. People debate this all the time

@Evl_67 Год назад

My man needs a bob and weave tutorial

@speedokoterefinishnetwork4937 Год назад

DUST EVERYWHERE 😂😂😂 man I hate that. I usually run a fan in my shop while sanding to suck the dust out.

@chrisbakke1975 Год назад

I have a question can you use the previous coats after you send them down a little bit as the primer without shooting primer so there’s still a bit of a layer of the previous paint if you’re gonna paint the same color?

@PaintSociety Год назад

In our case no because the paint was cracked throughout

@chrisbakke1975 Год назад

@@PaintSociety what about in the cause where the paint is not cracking?

@PaintSociety Год назад

Sure you can leave it

@toha9460 2 месяца назад

I bought a 1949 plymouth and removing the paint from it is a pain 12 houes of sanding and ive barley got anywhere

@fishpony1211 Год назад

Nice side by side comparison!

@michaelbyrnes7944 9 дней назад

The Eastwood drum wins hands down as the DA with 80 grit creates more heat more risk of buckling

@Bilal_El-Hassan Год назад

I've got crows feet on my hood too and was hoping I could block sand and da sand like the red nsx videos you had. Do I really have to go to bare metal?

@PaintSociety Год назад

Yes

@Bilal_El-Hassan Год назад

@@PaintSociety thanks mate 👍

@martinedwards4522 11 месяцев назад

how about chemical stripper?

@powers6963 Год назад

It looks like the SCT was faster. The side you used the rotary on was already halfway done by the time the SCT started on the pass side.

@PaintSociety Год назад

I covered more surface area. The side with the SCT narrows toward the front 4-5 inches

@pitcuz Год назад

I'm a DIY'er, was that a 1K acid etch primer? if so why it instead of a epoxy primer? Is one better than the other? Thanks, always look forward to your videos.