The Sprueverse Challenge - Build the 1960 1:6 Scale Time Machine - Part 3 - Pieces of Time 

If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne

ahhh, you're holding out on us with that motor. that's a nice one. Remember, that ugly spot on the cones where the vinyl overlaps goes at the bottom where hopefully no one will see.

I had never known that potentiometers are also sometimes called potmeters... you learn something new every day! Really been enjoying the channel.

Build going well so far Wayne , keep it going 👍👏👏👏😎 Ray

Loving the Time Machine build, you just need a cigar like stick figure to sit in the chair like the film version had before George sent his model into the future.

I love this build, so ornate and pretty. It's going to be pretty hypnotic when it's all working.

I am enjoying all of the videos across all three builds! It is fascinating to me to learn how each of you tackle all of the elements involved.

Dear Wayne, its looking bloody good! Best Wishes Johnny

thanks Wayne for the Link got the motor order today for my time machine I live in the United States in Indiana I to go to WonderFest if you go next year I will have to say hi and thanks for doing this time machine build iam so excited to get started on this project can wait till you guys post the like for the lights and motor and nano Arduino program to some much 😊 .

While building this ... ideas of time travel fill your head . Ideas of teleportation fill your head .. Also The idea of an electric chair comes to mind .

Great motor trail/error+audrino board mod

thanks Wayne for the motor link 🙂 you guys are doing a awesome job love it . I have masterpiece models time machine 1/6 scale I bought it years ago but I got it out to start working on it you guys are inspiring me to get going on it I did order from Mike the 1/6 scale figures but the morlock Winnie and George to make a diorama of George fighting the morlock to protect Winnie with the time machine in it.

I was watching the Time Machine by George Pal and noticed that the real machine's disk has the same warp in it. Ergo, the kit is a faithful reproduction!

My brother walks in see's me watching your video says is that your mate his bedroom is like yours LOL.

funny i watched the film last week lol😁 and 20000 leagues under the sea im wondering if they will ever bring out the Nautilus to build

Hi Wayne were can I order that motor your using to motorize the resin parts

Hi Wayne I would if you could help me. I noticed when you are doing small things you wear magnifying glasses. Do you wear these over your normal glasses or on their own. I have a set that you have to use on their own so I'm rendered almost blind when I take em off

Loving the build guys! In this segment, I would like to ask a couple of questions. First off I THANK you for saying DEE' kalls not DECK els. What are the red, green, and yellow lights? Are these LED's or sleeves with LED's inside. Are they part of the kit? 2. What is that motor? Source? I think this, or Lou's little direct drive gear reduced version is superior to the bevel gear, big motor idea. 3. Can you kindly direct me to the UV resin glue (and bottle with needle applicator) and UV light? I also like the brass color on the rails....just gold paint? Perhaps you guys could specify your paints and such for us following. GREAT and FUN videos...love the 3 way builds. Each of you guys have your own strengths and takes on this kit. Thanks RICHARD STIERS

Absolutely brilliant my friend! I'm liking your motor idea. No worries, I've shorted out a board or two in my days as well. Shit happens. Do you think there'll be an issue with heat having the motor encased like that? Also, that's going to put a lot of pressure on that joint from the weight of the arm and the dish. It's going to be very interesting as to what solution you guys come up with. I'm still up in the air on wether or not to buy this kit.

100 arduino boards on a wall, one blew up and I made a call, 99 boards on a wall!!🤣👍

I love your videos and especially the time machine ! Can you tell me where I can buy the kit from the time machine?

When this is over can you please post a parts list for the electronics? It would be helpful in keeping my build close to yours.

That resin ball looks better then the metal one.....the metal ball looks a bit too out of scale in my opinion........but Im sure either option is going to look good in the end

Humm, I kind of like the small motor idea for turning the disck... I noticed that you have a small Aeroplane in the background, just under/near the Millennium Falcon, and I am wondering what it is.

Blast it, Man! You did not show the right-angle geared motor out of the housing. A lot depends on how you plan of supporting the whole thing-- that pie-tin is rather heavy at the end of that diving board.

Hi Wayne, I've ordered the thin red and black wire from America that you have used here. I want it wire all the leds/ via Arduino to my 1/8 deagostini mustang, will it do the job?

The original disk doesn’t work correctly. I added another disk and some modifications. Now the disk generates energy . I got my lightening engine running. The tower isn’t working properly. I replaced the insides and now it to generates energy . I fixed the accelerometer so both engine and generator increase power at same time ... The Leyden jars and batteries are collecting and storing a huge build up of power . My design doesn’t plug into a wall or run on batteries.. the batteries are only for starting up the perpetual energy machine . Free energy....

Isn’t that car plate behind you too you’re right, supposed to say out of time, and not out at time?

Wayne....if I was building this model I would definitely use a right angled motor(like you show in this video). 200rpm still seems a little fast to me....yes you can use pwm on the arduino to control it to some extent, but I am not sure you will be able to run it at the low rpms you require....have you tried it yet? I haven't watched the film in years, so can't remember the speed the disc runs at....but I would assume max speed would be 20 or 30 rpm??? And slow speed? 5 pm

Wouldn't it be easier to get som small string/very tiny cardboard tags. Like they used to use in royal mail packages number each individual wire/do it that way🤔💭✂️🏷

👍🏻

I used a captain America’s shield for the disk ..

Like video

🍺🍺💞💞🐕🐕🙏🙏👍👍🇦🇺🇦🇺

LEDs use very little current ( milliamps), therefore you could have used very fine wire for them in comparison to those you have used (upto 1A). Can you please STOP using the term 'potmeter', the correct term is potentiometer (pronounced phonetically as "puh" + "TEN" + "shee" + "OM" + "i" + "tuh").