Тёмный
No video :(

The Supra Died: Day 1: The Analysis 

Sloth King Garage
Подписаться 5 тыс.
Просмотров 344
50% 1

Just as the title says, we're going to be looking into why the Supra died...
Supra Repair Manual (TSRM):
www.cygnusx1.ne...
Here's some links for items I generally use: Note, I listed some tool sets in 3/8 inch AND 1/2 inch drive for those of you that don't have a good set!
Milwaukee M18 FUEL 3/8" Compact Impact Wrench:
amzn.to/3Sif5P1
Milwaukee 2962-20 M18 18V Fuel 1/2" Mid-torque Impact Wrench:
amzn.to/48TdN28
Hex key/Allen Wrench Set:
amzn.to/4bbSlro
CRAFTSMAN Shallow Socket, Metric, 1/2-Inch Drive, 24mm:
amzn.to/3vOzKRX
CRAFTSMAN Shallow Impact Socket, Metric, 1/2-Inch Drive, 24mm:
amzn.to/3HALbyY
CRAFTSMAN 3/8" To 1/2" Socket Adapter:
amzn.to/47N3zzi
CRAFTSMAN Breaker Bar, 1/2-Inch Drive:
amzn.to/3UcMxb4
CRAFTSMAN Torque Wrench, 1/2" Drive:
amzn.to/3UcMmMW
CRAFTSMAN Torque Wrench, 3/8" Drive:
amzn.to/3U7cFUA
Craftsman Mechanics METRIC Tool Set 3/8 Drive:
amzn.to/47LUSWa
CRAFTSMAN Socket Set, 1/2" Drive:
amzn.to/3vVwTq7
Quart Size Hand Pump:
amzn.to/3Oc9irH
Seal Driver/Bearing Press Kit:
amzn.to/4b66WUW
Seal Puller:
amzn.to/48KNziG
Dead Blow Hammer:
amzn.to/4b4vUEh
Engineer's/ Mini 3lbs Sledge Hammer:
amzn.to/426wjSH
Cool Safety Glasses:
amzn.to/3u52u8l
Normal 3M Safety Glasses:
amzn.to/3OeCpdN
3M Safety Goggles:
amzn.to/3SuqQSc
Daytona 3 ton low profile floor jack that I use:
www.harborfrei....
Jack Stands:
amzn.to/3GE4KGF
Compact 2 ton floor jack:
amzn.to/3GZrQYL
3.5 ton floor jack:
amzn.to/41jyeBx
Nitrile gloves:
These are alright if you just want cheaper gloves:
amzn.to/3n77tl7
Here's my go-to. They're thicker:
amzn.to/3K14XpJ
Shop Paper Towels:
pack of 3: amzn.to/3yWvSfN
Single roll: amzn.to/3yWvSfN
Anti-seize:
www.amazon.com....
amzn.to/3ln2mNc
Work light:
amzn.to/3ljnxzB
Brake caliper Hanger:
amzn.to/412OB5M
Brake Grease:
amzn.to/43p1loS
Brake parts cleaner:
amzn.to/3MBNdCR
Caliper compressor tools:
amzn.to/3o7vJ7j
amzn.to/3MBNdCR
As an Amazon associate, I earn from qualifying purchases.
#toyota #4runner #maintenance

Опубликовано:

 

2 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 8   
@SamOHalloran
@SamOHalloran Месяц назад
Good luck my dude. Hopefully you caught it in time. As long as you support the engine, pulling the subframe isn't *that* bad....
@phantom240
@phantom240 Месяц назад
Before diving super far into it, I would be suspicious of your sensor reading some level of residual pressure. The system should have zero pressure after being shut off for some time. It might be worthwhile to remove one of the pressure sensors and crank for only a moment or two just to see if any oil is moving at all. Cranking the engine with no oil pressure isn't going to do much harm really. The residual film on the bearings will be fine as long as you don't actually run the engine.
@tsumi6745
@tsumi6745 Месяц назад
Once upon a time in a cozy little house nestled at the edge of a bustling town, there lived a dog named Toby. Toby was a lively and curious pup, always eager to explore and play. However, there was one thing Toby struggled with-falling asleep. Each night, as the sun dipped below the horizon and the stars emerged in the sky, Toby would find himself wide awake, his mind buzzing with excitement from the day's adventures. His human, Sarah, would gently stroke his fur and whisper soothing words, but Toby remained restless. One evening, Sarah decided to try something new. She dimmed the lights in the house, signaling to Toby that it was time to wind down. She sat beside him on his favorite rug, softly humming a lullaby that her grandmother used to sing. Toby cocked his head, intrigued by the unfamiliar melody. As Sarah continued to hum, Toby felt his eyelids grow heavy. The gentle rhythm of her voice seemed to lull him into a peaceful state. His breathing slowed, and he nestled closer to Sarah, finding comfort in her presence. Soon enough, Toby drifted off into a light slumber. The next night, Sarah repeated the routine. She dimmed the lights, hummed the lullaby, and stroked Toby's fur with a gentle touch. This time, Toby recognized the routine and began to relax more quickly. He closed his eyes, focusing on the melody and the warmth of Sarah beside him. It didn't take long before he was sound asleep, dreaming of chasing butterflies in a sunlit meadow. As the nights passed, Toby grew accustomed to the bedtime ritual. Sarah's soothing hum became a signal that it was time to let go of the day's excitement and embrace the tranquility of the night. Toby no longer tossed and turned-he knew that sleep would soon find him, just as it found Sarah each night. With each passing night, Toby's ability to settle down and sleep improved. He learned to savor the quiet moments before bed, relishing in the peacefulness that surrounded him. Sarah was proud of Toby's progress, knowing that their bedtime routine had brought them even closer together. And so, in that cozy little house at the edge of town, Toby found not only the joy of play and adventure but also the comfort of a restful sleep, guided by the gentle love of his human companion.
@Boeing-ER-jy9vq
@Boeing-ER-jy9vq Месяц назад
Hey dude, this is a huge coincidence. My oil pump had died. Im a 100% sure yours did too. you have to drop the subframe, take the pump out and replace the pump with a geniune oil pump, doesnt matter if its used. get a genuine aisin, not a DNJ. The brass gear had sheared off. Its not a big deal and it doesnt take a lot off time.
@carter180
@carter180 Месяц назад
Unfortunately can’t buy new Aisin oil pumps anymore. Will have to go used.
@isaeldearmas7694
@isaeldearmas7694 Месяц назад
Hey man, sorry again, but I recently looked at a video and saw there was some sort of bracket or stay bracket under the oil pan sort of subframe area under the car next to the oil drain plug and I’ve been looking in the internet and can’t seem to find it, could you maybe tell me the name of it or link I can’t really find anything on the interne. And I also realized I got an empty thing right next to the starter under the manifold I heard in a video it was something do to with “shock mount”, in my car there is nothing there. And for the two transmission plugs which you said one was for ABS and the other for reverse, do I have to loosen the transmission to take that top plug out cause I can’t reach out and I’m not sure where it even plugs into. Thank you. Sorry for the abundance of questions but I really want to turn this car on and it’s almost ready. Just missing these few details. Hasn’t turned on 17 years. Interested to see what’s gon happen with it . I have a short on my channel in reference to this. Thank you.
@isaeldearmas7694
@isaeldearmas7694 Месяц назад
Hey man what’s up, I was wondering cause I’ve been seeing it on the internet. Does the R154 have brackets holding it like something called wings or sum like that or are those just for the auto transmission or w58 etc. Cause I don’t have any brackets on my trans
@AW_DIY_garage
@AW_DIY_garage Месяц назад
Ohh no I just found your channel yesterday
Далее
Dodge Engineers Hate This One Simple Trick
18:42
Просмотров 148 тыс.
We De-Rust The Engine Bay Using OxyTech!
16:06
Просмотров 50 тыс.
Получили тысячи $$ на "старье".
20:10
How do you store FOOD in Italy
00:23
Просмотров 1,6 млн
Insane Coffee trick EXPOSED 😱☕️ #shorts
00:20
1 YEAR OF DAILY DRIVING THE A90 SUPRA (UPDATED)
18:59
How to fix peeling clear coat
13:58
Просмотров 45 тыс.
Broken car and Customer service experience
19:17
Просмотров 240 тыс.
WhistlinDiesel Cybertruck Durability Test #1
21:55
Просмотров 19 млн
Underhood Lighting Install On My MK3 Supra
13:20
Are Aftermarket Intakes Even Worth It?
10:17
Просмотров 8 млн
Fastest and Most Skillful Workers Ever
10:15
Получили тысячи $$ на "старье".
20:10