Тёмный
No video :(

The "Swedish Wrap Method" for Making a Small Morgan Dollar Coin Ring; FULL VIDEO 

CoinRingUSA
Подписаться 10 тыс.
Просмотров 136 тыс.
50% 1

This video shows from start to finish, how to take a Morgan Silver Dollar and turn it into a smaller-sized and straight-walled coin ring using the "Swedish Wrap Method".
* Pick up your Swedish Wrap Extrusion Die Set by clicking below:
www.etsy.com/l...
The "Swedish Wrap Method" technique is done right AFTER the traditional folding process with the Folding Cones, and immediately PRIOR to expanding the thinner cut-side out on a Ring Sizer Machine to give your smaller-sized coin ring those straight walls that were basically impossible to achieve on the larger-sized coins prior to this method of coin ring-making coming to the forefront.
This method will revolutionize the way that the smaller-sized coin rings are made from the larger coins!
Stay tuned for some new coin ring-making tools coming soon that will further simplify the "Swedish Wrap Method" technique for folks, as well as being able to better preserve the coins' overall detail.
Visit my Shop Page at: www.CoinRingUSA... for a current available list of the highest quality coin ring-making tools or message me if you'd like to be added to the Contact List for these new tools once they're rolled out.
You can also get the latest updates on coin ring-making tools and techniques at: www.CoinRingBlo...
You can Subscribe to my RU-vid channel to get the latest video updates here:
/ @coinringusa
Description: "The "Swedish Wrap Method" for Making a Small Morgan Dollar Coin Ring; FULL VIDEO "

Опубликовано:

 

19 июн 2016

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 111   
@michaelguidry6893
@michaelguidry6893 7 лет назад
Such well made videos and explanations to go along with them. I have ordered several of the tools and they are all top notch, well made and machined. Great teacher, thanks for the classes on how to do this interesting hobby.
@JC-Nor-Cal
@JC-Nor-Cal 7 лет назад
Thanks for your help. after trying it a couple times then watching your vid again. i can understand more clearly what needs to be done to make the process run smoother. thanks again..
@CoinRingUSA
@CoinRingUSA 7 лет назад
You're welcome!
@gwmerr
@gwmerr 8 лет назад
Your jewelry skill and dexterity is obvious, but i wanted to point out the quality in your video editing. Excellent lighting, focus, and a brisk pace of commentary that kept the information flowing efficiently. A+
@CoinRingUSA
@CoinRingUSA 8 лет назад
Thanks so much for the compliments; I really appreciate it... I'm glad that you enjoyed the video and the content!
@herbmeland6247
@herbmeland6247 6 лет назад
well done-easy to follow for a beginner. Thanks
@paulfortier7563
@paulfortier7563 7 лет назад
Hi Martin great video, just placed my order in with etsy can't wait to try it out. Awesome work man.
@CoinRingUSA
@CoinRingUSA 7 лет назад
Thanks Paul!
@hlthygrpa
@hlthygrpa 8 лет назад
Awesome video, your explanation of the process is easy to understand I be interested when the dies go on sale Thanks
@CoinRingUSA
@CoinRingUSA 8 лет назад
Thank you! Actually, my new Swedish Wrap Die Set is now available at my Shop Page at: www.CoinRingUSA.com
@Deepsouthoutdoors985
@Deepsouthoutdoors985 7 лет назад
just ordered my Swedish wrap dies from you.Waiting for the arrival
@CoinRingUSA
@CoinRingUSA 7 лет назад
Thanks Jesse, you'll love them!
@garyharrell2623
@garyharrell2623 7 лет назад
CoinRingUSA
@sneekerstattoo
@sneekerstattoo 7 лет назад
Great work thanks for sharing.
@CoinRingUSA
@CoinRingUSA 7 лет назад
You're welcome; small coin rings are a blast to make with this technique!
@harlenscoinrings9033
@harlenscoinrings9033 6 лет назад
Cool Video, and Nice Work 👍
@rwhughes47
@rwhughes47 4 года назад
GREAT VIDEO
@harlenscoinrings9033
@harlenscoinrings9033 6 лет назад
I SO WANNA TRY THIS!!!
@jaceylataire2511
@jaceylataire2511 5 лет назад
Absolutely amazing!!!
@corycanfield545
@corycanfield545 8 лет назад
great video awesome tools can't wait to get my hands on a set
@CoinRingUSA
@CoinRingUSA 8 лет назад
You'll love them!
@mc1607
@mc1607 7 лет назад
nice and perfect job ...
@CoinRingUSA
@CoinRingUSA 7 лет назад
Thanks!
@michael7324
@michael7324 8 лет назад
Another great vid. Thanks
@CoinRingUSA
@CoinRingUSA 8 лет назад
Thx Michael!
@blackphantom99
@blackphantom99 8 лет назад
Really impressive mate keep up the great work! 😉
@CoinRingUSA
@CoinRingUSA 8 лет назад
Thanks Will! How are you doing?
@denniswall5802
@denniswall5802 7 лет назад
Nice work thanks
@CoinRingUSA
@CoinRingUSA 7 лет назад
Thanks Dennis; it's an awesome technique!
@DetectingMyrtleBeach
@DetectingMyrtleBeach 8 лет назад
Excellent video...thanks.
@CoinRingUSA
@CoinRingUSA 8 лет назад
Thanks; it's an awesome technique!
@ejsprint30
@ejsprint30 8 лет назад
a work of art...
@CoinRingUSA
@CoinRingUSA 8 лет назад
Thanks; they're so much fun to make with this new technique!
@sfbfriend
@sfbfriend 7 лет назад
Not criticizing what you are doing, its great work and it takes patience to do. I just find it very difficult to destroy a Morgan dollar. I hope you do check the dates and are doing only high minted years? Or heavily worn coins. Great job. Thanks for sharing.
@CoinRingUSA
@CoinRingUSA 7 лет назад
Hi there. Yes, when it comes to Morgans, I personally only make coin rings out of Morgan's that have no numismatic value to them. I look for Morgan's that aren't rare in mintage, that may have small dings on the reeded edges; and / or that have been improperly cleaned just to name a few things that I look for.
@MrWhoDatIsMe
@MrWhoDatIsMe 7 лет назад
So you don't worry at all about that finale sizing as far as loosing detail? Nice job, BTW!
@stick344
@stick344 6 лет назад
how do you get the reeded edge to come in just a little more,so it looks more totally straight .Beautiful ring btw....thx
@yamil3598
@yamil3598 7 лет назад
Buenas tardes que medida es el último reductor que usas para que quede el anillo definido
@robertmariner7640
@robertmariner7640 5 лет назад
What swedish wrap are you using? 7 Degrees or 5 Degrees swedish wrap die?
@SilverShadow2LWB
@SilverShadow2LWB 7 лет назад
Well made video. Good lighting and great explanations. Do you know where I can obtain the resin cones and polymer pushrods? Thank you.
@CoinRingUSA
@CoinRingUSA 7 лет назад
Thank you for the compliments, I appreciate it! I actually have switched to stainless steel cones (because all other material types eventually wear out and often get your coin stuck on the cone); and I have switched to brass pushrods because the polymer pushrods just don't hold up. You can find those and all of my other coin ring-making tools at: CoinRingUSA.com Hope that helps!
@angeladeschenes7987
@angeladeschenes7987 5 лет назад
Love your video! where can I get push rods like yours?
@alejandrograffiti1015
@alejandrograffiti1015 5 лет назад
hello there,i would like to find the tool to make the rings with it ,can you help me with that please thanks...
@perroblanco49
@perroblanco49 4 года назад
what kind of Teflon tape are you using and how many wraps are you doing and where do you buy the tape from?
@paulfortier7563
@paulfortier7563 7 лет назад
Hi Martin I received my Swedish wrap dies and cones awesome. Did a few trials, I noticed that you don't push the coin thru you only bottom out and changes to the next size, is that better than pushing right thru?
@CoinRingUSA
@CoinRingUSA 7 лет назад
Hey Paul, my personal preference is to do just that: to basically bottom the coin out and immediately switch to the next (smaller) size Swedish Wrap die. That way, the coin stays CONE-SHAPED, which is key if you want to continue shrinking the coin through compression (Swede-wrap). If you fully push (extrude) the coin through the bottom of any particular SW die; the coin ring will be straight-walled, which is fine if you don't want to shrink the coin ring any further. Hope that makes sense!
@ajbfwb
@ajbfwb 8 лет назад
Another great video, Martin. I noticed you took even more care and detail in describing the process (maybe because the method is a bit new to you, too?) along the way, which is always helpful and appreciated. Gotta admit, I'd never seen pink teflon tape....is it somehow tied in to breast cancer awareness?? I notice you achieved about 75% of the folding using just the ring sizer. I know that in the past, you seemed to think that you preferred to use a 6 ton press when dealing with Morgan sized stuff. Would you say that, with sufficient annealing, you could pull off the entire folding process with JUST the ring sizer, as long as it was done with a sizer as durable as the Durston? Failing that, would you say a 1 or 2 ton arbor press at most would be all one would need? Thanks, and keep up the great work.
@CoinRingUSA
@CoinRingUSA 8 лет назад
Hey there, thanks for the compliments! Yes, I definitely recommend getting an arbor press, (and even getting a 2-ton arbor press if you can). The Harbor Freight 1 ton model arbor press falls short in my opinion on quality when it comes to the actual gearing on the unit holding up over time. And to fully extrude the larger coins out of the Swedish Wrap dies, it's best to use a 6-ton hydraulic press like the one offered at Harbor Freight. Hope that helps!
@ajbfwb
@ajbfwb 8 лет назад
It does....thanks!
@andrewmoon7273
@andrewmoon7273 7 лет назад
great video subscription
@CoinRingUSA
@CoinRingUSA 7 лет назад
Thanks Andrew!
@chipwoodin9060
@chipwoodin9060 6 лет назад
What are the plates you are using on the press? Thank you Chip
@johnkuba5496
@johnkuba5496 7 лет назад
What did you have between the coin and the expandable ring sizer?
@CoinRingUSA
@CoinRingUSA 7 лет назад
Hey John, I was using a piece of plastic taken from a plastic bottle. I now only use strips of the "BLUE Shop Towels".... does an amazing job at protecting the inner detail of the coin ring against the expanding splines of your ring sizer machine.
@DEW-fk7ij
@DEW-fk7ij 4 года назад
So the Swedish coin rap makes a longer ring because of the process. So can it then be fat tired a bit and still be longer then the other method but still the more rounded look and feel? Or does that make it the same?
@CoinRingUSA
@CoinRingUSA 4 года назад
Yes, you can fat-tire the coin ring still
@renuvatio
@renuvatio 7 лет назад
i reallly want to get started with my own coin ring kit , one that i can get the swedish rap setup as well so any help would be greatly appreciated my man
@herbmeland6247
@herbmeland6247 6 лет назад
My ring always has a slight cone shape-what am I not doing-I'm a new maker
@UJSATZ
@UJSATZ 8 лет назад
I HAVE ALL YOUR dies and cones , could you make a similar video showing step by step the sequence of dies and cones for the 50 cent and quarter, or at the very least publish this information on the web site
@CoinRingUSA
@CoinRingUSA 8 лет назад
Thanks Helmut! I can put together something like that in regards to those 2 stabilizer dies, thank you for the tip!
@whatspapadoingnow6197
@whatspapadoingnow6197 7 лет назад
What size arbor press were you using in the video? If I want a narrower ring width would I simply use a larger center hole punch size?
@CoinRingUSA
@CoinRingUSA 7 лет назад
I was using a 1-ton arbor press but have since gone to a 2-ton arbor press. Yes, generally speaking if you want to end up with a thinner (narrower) band on your coin ring; you'll want to start off with a larger center-punched hole in your coin ring. Hope that helps!
@BIGGIES2222
@BIGGIES2222 7 лет назад
When are you going to have the Swedish dies set .
@CoinRingUSA
@CoinRingUSA 7 лет назад
They will be back up for sale at my Shop Page at: CoinRingUSA.com this Thursday!
@johnlear6328
@johnlear6328 8 лет назад
Hey nice work! Just one question, is that a 4 spline mandrel or a 6 spline on the ring stretcher and would a 4 spline be good enough or should you buy a 6 spline if someone where to buy one?
@corycanfield545
@corycanfield545 8 лет назад
What's the largest size your able to make with this method
@CoinRingUSA
@CoinRingUSA 8 лет назад
Hey Cory, Not quite sure I'm understanding what you're asking... are you referring to what size coin can you Swedish Wrap and still get a larger size? Let me know. Also, my new Swedish Wrap Die Sete is now availablw at my Shop Page at: www.CoinRingUSA.com
@ismundocampos1390
@ismundocampos1390 7 лет назад
great job......what is the hole size for this coin ring?
@CoinRingUSA
@CoinRingUSA 7 лет назад
For this particular coin ring, I used a 3/8" center-punched hole... hope that helps!
@geneobrien8907
@geneobrien8907 8 лет назад
Martin, if the ring comes out of the final die at about 9 1/2 and is then straightened out to about a size 10, is that the largest size that can be made using the Swedish Wrap tools?
@CoinRingUSA
@CoinRingUSA 7 лет назад
Hey Gene, that depends on where you choose to stop extruding (pushing) your coin ring; let me know if that makes sense!
@user-bf3ju3bh7p
@user-bf3ju3bh7p 7 лет назад
What machine that you use in 10:58?
@trevskiyoung4984
@trevskiyoung4984 8 лет назад
Great video Martin can't wait to have a go, when will the dies etc be on sale?
@CoinRingUSA
@CoinRingUSA 8 лет назад
They're in production now and I will let you know as soon as they're ready!
@CoinRingUSA
@CoinRingUSA 8 лет назад
Hey Trevski, my new "Swedish Wrap" Die Set is now available at my Shop Page at: www.CoinRingUSA.com
@jayourdaddy
@jayourdaddy 8 лет назад
When all was said and done with this size 10 you made here, what was the actual size of the cut side of the ring? 10.5 or so? Clearly it was larger then 10, right?
@CoinRingUSA
@CoinRingUSA 8 лет назад
I "Swedish-Wrapped" it down to a size 9.5 and ended up removing a 1/2 size of inner material at the reeded sided, but yes; the thinner cut-side of the coin will always be larger, (due to it's being thinner), but since you measure the true ring size by the inner diameter of the (thicker) reeded-side of the coin; that's the side that matters most when it comes to sizing. Hope that helps!
@OriginalXfyre
@OriginalXfyre 8 лет назад
Any idea when these new Dies will be available in your shop?
@CoinRingUSA
@CoinRingUSA 8 лет назад
Soon I hope... but not soon enough! ;-)
@frankiefrankerson6435
@frankiefrankerson6435 7 лет назад
does it work with any nations coinage?
@CoinRingUSA
@CoinRingUSA 7 лет назад
Yes it does!
@elijahturrentine2767
@elijahturrentine2767 7 лет назад
How are your coins so clean?
@CoinRingUSA
@CoinRingUSA 7 лет назад
When you say clean, do you mean after it's been made into a ring? If so, I use "0000" steel wool mainly, followed by an antique patina solution. Hope that helps!
@johncoonradt9000
@johncoonradt9000 8 лет назад
where did you bye the ring expander and press
@CoinRingUSA
@CoinRingUSA 8 лет назад
The Ring Sizer Machine is a "Durston"; and it can be found at www.RioGrande.com; and you can pick up a 2-ton arbor press on Amazon. Hope that helps.
@rapid13
@rapid13 7 лет назад
This seems to take a long time. How is the total time invested different for the different methods?
@CoinRingUSA
@CoinRingUSA 7 лет назад
That's a tough question to answer accurately, as it really depends on the experience level of the person making the coin ring. The quality of tooling also makes a big difference.
@CHICACAIP
@CHICACAIP 7 лет назад
saludos la maquina como se llama como la consigo
@CoinRingUSA
@CoinRingUSA 7 лет назад
Victor, no estoy seguro de qué pregunta usted está pidiendo?
@CHICACAIP
@CHICACAIP 7 лет назад
Me refiero a la maquina que utiliza en el video para aser el anillo de una moneda gracias saludos
@CoinRingUSA
@CoinRingUSA 7 лет назад
La máquina se llama una "máquina de tamaño de anillo"
@phillipsterling7869
@phillipsterling7869 8 лет назад
Can you fat tire the swedish wrap after you are done ?
@CoinRingUSA
@CoinRingUSA 8 лет назад
Yes you can, quite easily actually!
@hudmonsterproductions2229
@hudmonsterproductions2229 8 лет назад
When will the swedish reduction dyes be up on the shop?
@CoinRingUSA
@CoinRingUSA 8 лет назад
Hopefully soon! Unfortunately for me my machinists are slammed and it's taking longer than expected, but you can always check back in or visit my Shop Page where they will be available at: www.CoinRingUSA.com
@CoinRingUSA
@CoinRingUSA 8 лет назад
Hey Hudson, my new "Swedish Wrap" Die Set is now available at my Shop Page at: www.CoinRingUSA.com
@loriyoung1041
@loriyoung1041 8 лет назад
I love this! What is this press called????
@CoinRingUSA
@CoinRingUSA 8 лет назад
Hi Lori, this technique is called the "Swedish Wrap Method", and you can find the Swedish Wrap Die Set, (and the pushrods that go with it), as well as all of my other coin ring-making tools at: www.CoinRingUSA.com ;-)
@loriyoung1041
@loriyoung1041 8 лет назад
AWESOME - thank you!
@scottvanmeter1944
@scottvanmeter1944 8 лет назад
This is really cool!How Much is equipment and where can I buy it. Thanks!!
@CoinRingUSA
@CoinRingUSA 8 лет назад
Hey Scott, they will be available soon at my Shop's Page at: www.CoinRingUSA.com
@CoinRingUSA
@CoinRingUSA 8 лет назад
Hey Scott, my new Swedish Wrap Die Set is now available at my Shop Page at: www.CoinRingUSA.com
@shaunm2208
@shaunm2208 8 лет назад
Where can I buy the machine and dyes
@CoinRingUSA
@CoinRingUSA 8 лет назад
Hey Shaun, they will be available at my Shop Page shortly at: www.CoinRingUSA.com ... feel free to check there often!
@jnj1947
@jnj1947 8 лет назад
where do I get the push rods you use?
@CoinRingUSA
@CoinRingUSA 8 лет назад
Hi John, they will be available on my Shop Page in a week at: www.CoinRingUSA.com ... thanks!
@CoinRingUSA
@CoinRingUSA 8 лет назад
Hey John, my new "Swedish Wrap" Die Set is now available at my Shop Page at: www.CoinRingUSA.com
@LomoPlateAldo
@LomoPlateAldo 8 лет назад
is this legal?
@CoinRingUSA
@CoinRingUSA 8 лет назад
Completely, 100%. I actually wrote a great short article on the topic that can be found here: coinringusablog.com/frequently-asked-questions/
@jayourdaddy
@jayourdaddy 8 лет назад
I see that you are selling brass pushrods, but this video shows plastic. Why the change? Wouldn't the plastic ones have the advantage of not scoring the reeded side, ever?
@CoinRingUSA
@CoinRingUSA 8 лет назад
I went with the brass push rods because they hold up much better under the pressures that are exerted when Swedish-Wrapping... the nylon just doesn't hold up; it deforms rather quickly. Hope that helps!
Далее
How to Price your Coin Rings, and other crafts!
14:26
Making A Coin Ring With Harbor Freight Tools
11:45
Просмотров 162 тыс.
Мелл хочешь сына от Дилары
00:50
Просмотров 179 тыс.
❌Ему повезло больше всех #story
00:41
Part One of Swedish Wrap Technique
24:15
Просмотров 64 тыс.
Make A Teeny-Tiny Model Airplane Engine From Scratch
31:59
How to Make Any Coin Ring Perfect Every Time
11:16
Просмотров 583 тыс.
How to Make a Kennedy Half Dollar Coin Ring
21:05
Просмотров 10 тыс.
Мелл хочешь сына от Дилары
00:50
Просмотров 179 тыс.