Тёмный

The Ultimate Lid Tek Guide! (Unmodified and Modified) 

PhillyGoldenTeacher
Подписаться 178 тыс.
Просмотров 104 тыс.
50% 1

Today's class goes over everything you need to know about lids!
Premade Liquid Culture Lids
amzn.to/3c5UyIL
Ball Leak Proof Lids (regular mouth)
amzn.to/2NyiPgf
Ball Leak Proof Lids (widemouth)
amzn.to/3qNzj2s
Self Healing Injection Ports
amzn.to/3qJUFO6
Syringe Filters for Gas Exchange
amzn.to/3pcE7hf
10z Ultra Fine Mister
amzn.to/2Io5apI
(Using these links will help me out with a minor commission at no cost to you, thanks for the support)
⬙ PGT Links ⬙
🧫Links to all products/gear I use: kit.co/PhillyGoldenTeacher
(Using these links will help sensei earn a small commission and support the channel)
👕Merch Shop: teespring.com/stores/my-store...
📱Instagram: / phillygoldenteacher
📄Patreon: / phillygoldenteacher
💻Discord: / discord
⚪️Microppose Link for Injection Ports, use code PGT for a 10% discount.
microppose.com/r?id=r87sbd
💉Looking for Spores? Use code PGT for a discount here.
inoculatetheworld.com/?ref=24
🦠DrMyc Products
www.drmyc.com?sca_ref=1761105.0L3Ag7LnMw Use code PGT for a discount here.
🌿Fungstrate
fungstrateco.com/?ref=337 Use code PGT for 5% off subs and grains.
🌱BoomerShroomer Inflatable Tubs
boomershroomer.com/?ref=64 Use code PGT for discount here.
🍄MushroomSupplies
mushroom-supplies.sjv.io/5g5vr9 Use code PGT for 10% off.
Vivosun - Code PGT gets you 12% off.
bit.ly/3Fqa1BD

Хобби

Опубликовано:

 

23 янв 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 224   
@jmseipp
@jmseipp 3 года назад
A 5/32 drill bit is the size you’ll need for the smaller hole for your liquid culture lids for your gas exchange and a 1/2” Forstner Bit will give you a really clean hole even in the metal Ball Jar lids. I place them onto a piece of wood and then drill them. Works perfectly. Regular 1/2” drill bits will mangle your lids.
@BlakeFlud
@BlakeFlud 3 года назад
Definitely the coolest thumbnail art to date!! Stoked for more from our sensei
@hoodyk7342
@hoodyk7342 3 года назад
Completely disagree, its very anime weeboo, that kind of mindset is not healthy
@justwhistlinpixie
@justwhistlinpixie 3 года назад
@@hoodyk7342 Lighten up man, it's a fun aesthetic.
@hoodyk7342
@hoodyk7342 3 года назад
@@justwhistlinpixie No its fucking weeb garbage half the time
@hoodyk7342
@hoodyk7342 3 года назад
@@justwhistlinpixie the moment he fucking grows up and stops acting like some anime teenager saying shit like "sensai" and drawing a fucking WEEB FURRY DEER WITH GLASSES AND GUNS...then he will see a huge surge in views
@thelastrebelshow1627
@thelastrebelshow1627 3 года назад
His wife does the art.
@sarakajira
@sarakajira 3 года назад
Suggestion! Get a cheap wood burner from a hobby store to melt the plastic holes. We use them all the time in the reptile world to cut clean holes in tubs to add ventilation, etc. Works great and you don't need to keep heating it up with a lighter. Just plug it in, wait a few minutes and you're good to go. And they only cost a few bucks. 🙂 Of course, a nail works in a pinch.😉 Thanks for the great videos!
@mikehoncho2149
@mikehoncho2149 3 года назад
I always get so stoked when I see the notification, but gotta wait for the premier tho!!!
@apocalypsenow659
@apocalypsenow659 3 года назад
Hey PGT. Thanks for all the great content. I can't wait to see what is next. I'm chiming in early I'm so excited! Peace
@fishinghippie958
@fishinghippie958 3 года назад
Thanks for the goldmine of information you put out for people like us here in the comments. We appreciate you big time PGT
@mitchellrussell5062
@mitchellrussell5062 3 года назад
Just wanted to say thank you PGT!! You have me on the road to growing, just went grain to bulk this weekend! Keep up the amazing job and freaking awesome art!!
@gello8518
@gello8518 3 года назад
to be honest your in the right place with the current group of mycology youtubers this guy is the best.
@mitchellrussell5062
@mitchellrussell5062 3 года назад
@@gello8518 yeah bud, looking into this more I got me onto reddit finally. So many people give PGT props and they're all so well deserved! I want him to make a comic book series or graphic novel with his kick ass art work!
@thelastrebelshow1627
@thelastrebelshow1627 3 года назад
@@mitchellrussell5062 His wife does the art.
@insidejob6961
@insidejob6961 Год назад
howd it go?
@Waterisntblu3
@Waterisntblu3 3 года назад
Wooow the timing is crazy, I was just searching this up only to notice you uploaded a video today!😇
@artifexhuman
@artifexhuman 3 года назад
Much love PGT, thanks for all you do!
@jamessteyn4752
@jamessteyn4752 3 года назад
Here I was wondering about different lids. Another awesome video...
@naftalibendavid
@naftalibendavid 3 года назад
Superbly accessible and practical. I love that after 8 hours I am not even in the first 70 comments.
@mattd2907
@mattd2907 3 года назад
Drill and “step bit” real slow like is the easiest way to plow holes in plastic. Drill bits will crack your tub and the melty melty nail makes nasty smoke but is very effective. Thanks PGT for your constant knowledge flow!
@slimgrows
@slimgrows Год назад
Drill in reverse
@johnriperti3127
@johnriperti3127 3 года назад
This is so good and informative. Thank you so much
@thedarwinist672
@thedarwinist672 3 года назад
First time watching this, very informative. Great lc tek video today too.
@sage5757
@sage5757 3 года назад
Love the vid thank's can't wait for the next one
@johnwayne420
@johnwayne420 3 года назад
The art work is freaking awesome
@WilliamWeyes
@WilliamWeyes 3 года назад
We love you PGT!
@TheIcybus
@TheIcybus 3 года назад
Another great video fam 🙏🏽
@darkangel686868
@darkangel686868 3 года назад
That artwork looks awesome sensei
@jeremyberger3505
@jeremyberger3505 3 года назад
Thanks a lot !! Answered my last video's question and furthered it more with a vid, you're the mvp, sir :))
@stopitdan
@stopitdan 3 года назад
"2 to 3 centimeters, or about a quarter inch" lol love you PGT
@niklashultkrantz7766
@niklashultkrantz7766 3 года назад
It's always this conversions. That would a massive ventilation hole. I still don't know what a quart is.
@DizzyNLD
@DizzyNLD 3 года назад
@@niklashultkrantz7766 a quart is comparable to one liter
@intergalacticprophylactic
@intergalacticprophylactic 3 года назад
ALL HAILL YEE GOLDEN SENSEI!! LEAD ME TO VICTORY!!!!
@MattRoadhouse
@MattRoadhouse 3 года назад
I've found the two piece really needs tape (painter's works fine) to keep them together. If you ever G2G, having them come apart is a massive issue for doing quick transfers. I do 1x 1/4" drill with two micropore tape in X pattern
@johndong9843
@johndong9843 3 года назад
The microppose stuff has been great for me, highly recommend also.
@superirishm4n
@superirishm4n 3 года назад
Love it! thanks for all the help sensei. Can you make a vid on your still air box setup?
@brianguichet4047
@brianguichet4047 2 года назад
Dude your art work is epic
@kevinmendoza5035
@kevinmendoza5035 3 года назад
Philly that thumbnail is 🤩
@jodypalmer583
@jodypalmer583 3 года назад
Right on bro you are helping humanity!
@psinaut4775
@psinaut4775 3 года назад
Well this makes my Sunday
@sabade.
@sabade. 3 года назад
heyooooo love the channel
@alchinl.a6559
@alchinl.a6559 3 года назад
Keep it upppp!!!!!
@philipholman9898
@philipholman9898 Год назад
I'm using unmodded lids for this run. I like the simplicity of it .
@ILoveZMan
@ILoveZMan 3 года назад
Hi could you show us the cloned mushroom bulk substrate when it is ready. I would like to see if the genetics have improved
@4l3xpictures
@4l3xpictures 2 года назад
I'm curious how bad would it be to place the tinfoil over the entire jar lid (don't have any 2 piece one) and make sure it's a tight fit?
@Huachuma1
@Huachuma1 3 года назад
Hmm, I just got these filter patches from amazon, but I thought they'd last longer. Heck one fell off during grain sterilization recently. Trying to minimize my plastic waste, think I'll do injection ports but for GE I'll just keep the lid loose. I wonder how long these PP5 white lids are gonna last. Might switch to the grey ones, at least that PP5 is recyclable.
@mudhoney99999
@mudhoney99999 3 года назад
Perfect!!! Thank you..
@BisTLeiS
@BisTLeiS 3 года назад
Thank you PGT😘🍄💗🤙🏻🌹👽
@euphorik_weezul
@euphorik_weezul Год назад
If you drill a hole in the lid with a micropore filter over it. Do you still have to loosen the lid while pressure sterilizing and wrap the lid in foil?
@goddogodson4211
@goddogodson4211 3 года назад
The jar that was shown with the micropore tape .. would you still undo the lid slightly for more Gas exchange or would the tape be enough?
@sierrahinson39
@sierrahinson39 3 года назад
How do you sterilize the whole jar once you have stuck filter and injection piece on? Are they heat resistant?
@qwqwueis
@qwqwueis 3 года назад
The plastic lids don’t have sealing rings inside right? Are you not worried about contamination when allowing gas exchange for the grain jars via the loosened lid rather than being filtered through a hole w/ filter patch/poly? Just watched your oat tek video and was also curious if you need to worry about contamination being sucked into the jars as they cool since these pressure cookers dont vacuum seal as they cool down?
@NBA-LejonBrames
@NBA-LejonBrames 3 года назад
So when u upgrade to a flow hood are u gonna purchase or diy?? RR on shroomery has had a series 1 flowhood for over 10 years from fungiperfect. Its 1000$ but I think its worth the investment
@benreed4918
@benreed4918 3 года назад
Do you use a specific autoclavable syringe filter or do you just buy typical syringe filters that you may find on Amazon for cheap? I had 24 jars half with un modified lid and half with syringe filters in injection ports. I bought cheap ones off Amazon and my jars were slow colonizing and I cracked the lids and they sped up with the rest of jars in a couple days. So I am wondering if the autoclave may have plugged or melted the filters because they were cheap? Wish I could post pics on here I'm a proud beginner lol!
@g-lurk
@g-lurk Год назад
how often do the ports and filters need to be replaced for the "Premade Liquid Culture Lids" in your description? thanks a lot PGT
@b.ph.4623
@b.ph.4623 3 года назад
As always! Full of useful knowledge. Thank you!
@alberto2alvarez14
@alberto2alvarez14 3 года назад
Thank you bro.
@MadeYouLook136
@MadeYouLook136 3 года назад
I’ve had holes in my previous lids but I tried the unmodified lid gel this time...once I inoculate do I still leave the lids flipped over and loose? Also do I keep the foil on after like I’ve seen in one of the previous videos
@jadenr951
@jadenr951 2 года назад
Can you use the liquid culture lids for grain ? I had bought them already for my jars and I started soaking grain last night lol.
@jadensieppert259
@jadensieppert259 3 года назад
Can I man make an agar slurry and use that to colonize straight to a monotub full of coco choir/ vermiculite/ and gypsum?
@nikolajelic892
@nikolajelic892 3 года назад
Have you ever used something like pickle jar and do you need to modify jars and lids like that.
@peter7582
@peter7582 9 месяцев назад
I'm using the LC lids, with injection port and FAE port for grain jars. Got sick of always losing half my jars to contamination with unmodified lids
@albertoramirez9465
@albertoramirez9465 2 года назад
Do you recommend using syringe filters for gas exchange in grain spawn jars instead of micro pore?
@Nathan-om7ko
@Nathan-om7ko 3 года назад
We need it nowwww
@davidrose9934
@davidrose9934 3 года назад
Could you use a loose metal lid for lc and just tighten when you need to shake
@thedarwinist672
@thedarwinist672 2 года назад
Can you just flip the lid on LC jars too, without the poly-fil?
@kylesgarden8725
@kylesgarden8725 3 года назад
Thank you 🙏
@tonymictiger6931
@tonymictiger6931 3 года назад
Why don't you use the (liquid culture lids) for the grain jars while they are colonizing?
@g-lurk
@g-lurk Год назад
are those white lids recycle code 2, and does it say 'not for processing' on the inside? that might be why they warp.
@hereunderduress
@hereunderduress 3 года назад
Unmodified is actually pretty damn good
@justwhistlinpixie
@justwhistlinpixie 3 года назад
The plastic lids are not airtight though, right? Since they can be used in the freezer, and the contents of the jar expand when they freeze, the air escapes through the threading. There's no gasket. Maybe I'm overthinking it. Have you ever had a problem with those plastic lids for LC?
@jerzlikestrees2606
@jerzlikestrees2606 3 года назад
If you spray a high heat no rust paint on the lids they will last longer, sorry if this has been mentioned. Greats vids bro!
@jamesrapkins4935
@jamesrapkins4935 3 года назад
i have been using the green syringe filters 22micron for Gas Exchange port- i see you use a loose lid technique. some of my jars have stalled. ... do you think the loose lid tek is superior PG Sensei?
@opposingshore9322
@opposingshore9322 3 года назад
Thanks for the great vid! I do notice a lot of respected expert growers still recommend polyfill or SFD lids for grain jars. Do you not see any additional contam when using unmodified loosened lids during colonization?
@sandman5244
@sandman5244 3 года назад
I like to use a drill and a step bit, works great
@dannyreyes5412
@dannyreyes5412 Год назад
Hey would the high temp. Silicone + cotton ball method work for liquid culture?
@mitchhutto2953
@mitchhutto2953 2 года назад
I'm trying ur potato agar tek I've never been able to do agar but I haven't gave up either wish me luck this go round
@westcoast8185
@westcoast8185 Год назад
When sterilizing your grains, is it necessary to poke holes thru your lids?
@armithel3133
@armithel3133 Год назад
My white lids were cracking when i put holes in them. Switched over to using a hot soldering iron to make clean ports.
@harryrissik3310
@harryrissik3310 2 года назад
What an epic thumbnail!
@Jason3153
@Jason3153 7 месяцев назад
No comment on this, but could you do a video on gene selection? Having a hard time finding good info.
@samuelaubrey2612
@samuelaubrey2612 3 года назад
Can I use a 0.22 micron filter for a grain spawn jar?
@skullmoney9137
@skullmoney9137 3 года назад
Its ma boii philly golden 🤣
@jefolson6989
@jefolson6989 2 года назад
Gonna try the flipped lid. Making my own is tedious and rust is immediate. Thanks
@lourdehouse6080
@lourdehouse6080 Год назад
How did this work out for you.?
@blackmantis001
@blackmantis001 2 года назад
If they leak how are you removing the culture the when the jar gets low?
@mikecurry6847
@mikecurry6847 3 года назад
I'm not sure why people say that an unmodified lid won't provide enough GE. If you look at the hole under that micro pore tape, it's really not a very big surface area. It wouldn't take a very much to make that same surface area but spread around the jar instead of in one single spot. I will say though that using unmodified lids makes me a bit nervous since there's nothing filtering large particles out of the air. So I have a tub that I sterilize and put my grain jars in to colonize.
@psilancelot1
@psilancelot1 2 года назад
I always leave the lid a little loose so excess gas can escape saves time on drilling holes
@bmoreal-81
@bmoreal-81 2 года назад
Can i use unmodified lid tek for making Liquid culture?
@LikeCarvingACake
@LikeCarvingACake 3 года назад
Savage! Uses a glowing red nail instead of a drill bit.
@nubletten
@nubletten Год назад
I bought aquarium silicone because it did not have anti fungal chems and last up to 200 C, saw the gasket seal tek, but gasket seal say it may induce canser in the data sheet... so replaced with silicone sealant.
@wendyclairmont4410
@wendyclairmont4410 Год назад
Have you tried stainless steel 2 part lids?
@pherrumcorpus9444
@pherrumcorpus9444 3 года назад
nice video ^^ you know what's better than a blowtorch + nail for making holes in plastic? Soldering Iron! Not as fun tho :p
@marcusp6501
@marcusp6501 3 года назад
Can you make a how to video of how to make liquid culture?
@2bullcrap
@2bullcrap 2 года назад
Your artwork is the shizzit! I'd watch your channel just for that.
@1siggycrs
@1siggycrs 11 месяцев назад
what is the "XSpecial 1X 24k ports"?
@kicknadeadcat
@kicknadeadcat 3 года назад
I have a shoe box grow. First time went great. Lots of mushrooms. New shoe box with same strain has stalled. Same conditions as first. Three weeks and doesnt look any different. Sparse grow on top. I tried fruiting and no luck. Moist but not pooling. No infection and smells like mushrooms. Has this happened to you?
@PhillyGoldenTeacher
@PhillyGoldenTeacher 3 года назад
It stalled, something in the sub mix is messing with them.
@aaronokamoto1680
@aaronokamoto1680 3 месяца назад
Hey I think you might want to consider an update now that SS lids are out. That's what I bought to make lids.
@MrPerryA
@MrPerryA 3 года назад
Can we use this tek for brf cakes ?
@joecucinotta2464
@joecucinotta2464 Год назад
Do you keep the tinfoil on the top after sterilizing?
@JolynJessica
@JolynJessica Год назад
who does your awsome artwork in the intros?
@yes-jz5hd
@yes-jz5hd Год назад
This channel is underrated tbh
@PhillyGoldenTeacher
@PhillyGoldenTeacher Год назад
🙏
@dustintinsley3899
@dustintinsley3899 5 месяцев назад
a soldering iron/wood burner works fantastic to melt holes in plastic.
@alexcorbett414
@alexcorbett414 Год назад
Do you need fae during colonisation?
@briancafffey4838
@briancafffey4838 3 года назад
Guys I had a question after watching. With modified liquid culture lids are you able to pressure cook the jars with them in their modified form with injection port/ filer patch already installed as long as the jar is covered with foil in the PC????
@zariktracy3736
@zariktracy3736 Год назад
Did you get your answer?
@gambit9315
@gambit9315 3 года назад
Can you place the liquid culture leds in the pressure cooker while their modified, is there anything specific you need to do for it to work? Is it possible to use the liquid culture leds as for the use of grain spawn? That way you avoid ever opening the leds and contamination.
@PhillyGoldenTeacher
@PhillyGoldenTeacher 3 года назад
Yes you totally can use the LC lids for your grain jar and innoculate with a syringe to avoid opening it up. I just loosen the lid a quarter turn when going into pressure cooker and tighten it when I'm done and I'm taking it out of the pressure cooker.
@gambit9315
@gambit9315 3 года назад
@@PhillyGoldenTeacher For replying back
@guszins
@guszins 3 года назад
Ur next series should be working with Liquid Culture and called the Culture Cases
@chrisalmanzar5484
@chrisalmanzar5484 3 года назад
Can oxidation on the lid contaminate your grains when its time to shake up the jars?
@PhillyGoldenTeacher
@PhillyGoldenTeacher 3 года назад
No it doesn't. If you get contam, it was already in there to begin with.
@Wickedstickyflowers
@Wickedstickyflowers 3 года назад
You ever have good look grow just stall out... did you toss it or try to rejuvenate it? Think might be kinda cold only been 70 in the room
@michaellangshaw1521
@michaellangshaw1521 3 года назад
I would say that’s probably your problem. I just experienced the same thing with this cold snap I’m having in my part of the country. New England. Several things can stall out your jars. Wrong temperature, your grains or BRF are not hydrated enough, poor gas exchange, or a contaminant. I’m hoping for your sake and my sake for that we just need to turn the heat up. I just put a space heater over by jars last night when I noticed this happening. I am currently on my first growth and learning as you are.. I am telling you this because I am not a experienced grower. The information I just gave you I read from a reliable source. That being said I am 100% positive those are 4 reasons why jars will stall out once they started colonizing. There could be other reasons but those are the 4 majors that I learned. Maybe somebody else can chime in. Good luck, be safe, and be well. ✌🏻💚🍄🤯
@RunescapeElijah6578
@RunescapeElijah6578 3 года назад
Colonization temp ranges for optimal growth are between 75F-80F, higher leads to contamination running amok and too low will make them stall.
@AhmedBodhi
@AhmedBodhi 3 года назад
Product description "Not safe for canning or microwave use" Sure we can use it in PC with 15psi?
@PhillyGoldenTeacher
@PhillyGoldenTeacher 3 года назад
Yea you can pressure cook it, its not meant for canning(as in preserving jars) stick to metal lids for canning.
@KingFergus
@KingFergus 3 года назад
How do you inoculate your jars with a spore syringe if you don't have holes in them?
@dressedanddepressed2301
@dressedanddepressed2301 3 года назад
Lift em and barely crack em open as squirt it in
@gratefuldoge8598
@gratefuldoge8598 3 года назад
When I was a teen, first getting started in mycology, my boy Barakanaten from Shroomery showed me the EZ Felt filter method. I think itd make a good addition to your lid video 👍🏻🍄👽
@bunnyscott1025
@bunnyscott1025 3 года назад
G The Entity it's all I ever used....that an unmodified
@gratefuldoge8598
@gratefuldoge8598 3 года назад
Mark Yeakel the stuff lasts forever!!
Далее
Sporeswabs on Agar - The Agar Files
10:52
Просмотров 107 тыс.
Я КУПИЛ САМЫЙ МОЩНЫЙ МОТОЦИКЛ!
59:15
IQ Level: 10000
00:10
Просмотров 2,6 млн
I was WRONG about Unmodified Lids
3:52
Просмотров 56 тыс.
How to Make Culture Slants
17:34
Просмотров 99 тыс.
How to Make CHEAP Liquid Culture Jar Lids
6:50
Просмотров 3,4 тыс.
Наше обычное утро 💕
0:42
Просмотров 2,1 млн
Будни пекаря. Часть 6
0:59
Просмотров 4 млн
Телега - hahalivars
1:00
Просмотров 6 млн