THERE AIN’T NOTHING I DON'T LIKE ABOUT THIS CHIPPER FROM SPLIT-FIRE!

Подписаться 216 тыс.

Просмотров 115 тыс.

50% 1

We're partners with Split-Fire because they make top-notch products. And we're excited that today we get to show you their their 4003 Wood Chipper. We hooked it up to our 25HP Summit TX25 and then to our 38HP John Deere 2038R. It performed great with both, unexpectedly a little better on the higher horsepower machine. We'll walk you through the features and then demonstrate the chipper in action.
Products in video:
Split-Fire 4003 Wood Chipper: split-fire.com...
Ultratec Trailers: www.goodworkst...
Summit TX25 Tractor: www.summittract...
Good Works Tractors is happy to be sponsored by Rim Guard Solutions! This is perhaps the most well-known ballast brand on the market today. Rim Guard goes right inside your tires, so it's out of the way, it doesn't freeze, and doesn't corrode. It's made from natural materials, so it's safe around livestock and pets if it spills out. Rim Guard liquid ballast adds more weight to the back side of your tractor improving stability, loader performance, and power to the ground. Find your closest dealer at bit.ly/3d0whX0
LOOK AT OUR MOST POPULAR ATTACHMENTS!
Speeco Quick Hitch: bit.ly/3NFC0yl
Stump Wrecker: bit.ly/3GptiC5
VersaBracket Combo: bit.ly/3wUPrnl
Snow Pusher: bit.ly/3NB4BVw
Landscape Rake: bit.ly/3GpSlF6
Land Plane: bit.ly/38SDHcY
Pallet Forks: bit.ly/38wRztu
Grapples: bit.ly/3PNNYaZ
WANT TO SAVE MONEY? CHECK OUT THE GWT DISCOUNT CLUB! Use code GWT at any of the vendors below and you will save cold hard cash :) I will also get a commission for the sale, so it's a win-win-win!
USE CODE "GWT" TO SAVE BIG WITH:
BUCKET BRACKETS @ www.jufabworks.com
CUSTOM GRILL GUARDS @ www.5elevendesi...
PTO QUICK ATTACH @ tractorptolink.com
DIY HYDRAULIC SOLUTIONS @ www.summit-hydr...
GAME CHANGING GREASING SYSTEMS @ www.lube-shuttl...
TIRE CHAINS @ www.tirechainso...
PREVENT FLAT TIRES @ www.multiseal.us
CULTIPACKERS & CRIMPERS @ www.packermaxx.com
ALL OEM JOHN DEERE PARTS @ www.247parts.com
ACCESSORIES AND BACKHOE BUCKETS @ www.muddscustom...
CUSTOM TRACTOR FLOORMATS @ www.tractormat.com
PROTECT, ORGANIZE, IDENTIFY HOSES @ www.outbackwrap...
BOX BLADES FOR ATV'S @ www.northwoodsf...
HYDRAULIC SYSTEM PROTECTION @ www.hoseendcham...
DUMP FROM THE SEAT MATERIAL COLLECTION SYSTEMS @ www.proteroinc.com
POWERED SWEEPERS SWEEP UP ANYTHING @ www.sweep-all.com
EASY WHEEL TOP LINK HANDLE @ www.tractorafte...
TIRES, WHEELS, AND DUAL ADAPTERS @ www.millertire.com
AMERICAN MADE CARRY ALL ON STEROIDS @ http:www.bigtoolrack.com
THE BEST TOOTHBAR AND MORE @ www.heavyhitch.com
5% OFF WITH CODE GWT AT TRAC SEATS! www.tracseats.com
SHOP: www.goodworkstr...
AMAZON: www.amazon.com/...
SUBSCRIBE: / goodworkstractors
LIKE: / goodworkstrac. .
FOLLOW: / goodworkstra. .
MERCHANDISE: stores.inksoft...
*Discount codes cannot be combined with any other promotions, offers, or deals!
**I choose to sell some products through 3rd parties instead of stocking items myself. Know that I will receive a commission if you choose to purchase through certain links. Thank you very much for your support!
This video is for entertainment purposes only. Good Works Tractors (Good Works Lawn & Power, LLC) cannot be held responsible for content found in any video. Always reference your owners manuals, use extreme caution, and proceed at your own risk.

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 210

@GoodWorksTractors Год назад

Some jobs are fun and this is one of them. Watching things get chewed up is a good time! Split-Fire 4003 Wood Chipper: split-fire.com/us/wood-chipper-4003-us/ Ultratec Trailers: www.goodworkstractors.com/?s=ultratec Summit TX25 Tractor: www.summittractors.com LOOK AT OUR MOST POPULAR ATTACHMENTS! Speeco Quick Hitch: bit.ly/3NFC0yl Stump Wrecker: bit.ly/3GptiC5 VersaBracket Combo: bit.ly/3wUPrnl Snow Pusher: bit.ly/3NB4BVw Landscape Rake: bit.ly/3GpSlF6 Land Plane: bit.ly/38SDHcY Pallet Forks: bit.ly/38wRztu Grapples: bit.ly/3PNNYaZ WANT TO SAVE MONEY? CHECK OUT THE GWT DISCOUNT CLUB! Use code GWT at any of the vendors below and you will save cold hard cash :) I will also get a commission for the sale, so it's a win-win-win! USE CODE "GWT" TO SAVE BIG WITH: BUCKET BRACKETS @ www.jufabworks.com CUSTOM GRILL GUARDS @ www.5elevendesignz.com PTO QUICK ATTACH @ tractorptolink.com DIY HYDRAULIC SOLUTIONS @ www.summit-hydraulics.com GAME CHANGING GREASING SYSTEMS @ www.lube-shuttle.us/store TIRE CHAINS @ www.tirechainsonline.com PREVENT FLAT TIRES @ www.multiseal.us CULTIPACKERS & CRIMPERS @ www.packermaxx.com ALL OEM JOHN DEERE PARTS @ www.247parts.com ACCESSORIES AND BACKHOE BUCKETS @ www.muddscustoms.com CUSTOM TRACTOR FLOORMATS @ www.tractormat.com PROTECT, ORGANIZE, IDENTIFY HOSES @ www.outbackwrap.com BOX BLADES FOR ATV'S @ www.northwoodsfabrication.com HYDRAULIC SYSTEM PROTECTION @ www.hoseendchamer.com DUMP FROM THE SEAT MATERIAL COLLECTION SYSTEMS @ www.proteroinc.com POWERED SWEEPERS SWEEP UP ANYTHING @ www.sweep-all.com EASY WHEEL TOP LINK HANDLE @ www.tractoraftermarket.com TIRES, WHEELS, AND DUAL ADAPTERS @ www.millertire.com AMERICAN MADE CARRY ALL ON STEROIDS @ http:www.bigtoolrack.com THE BEST TOOTHBAR AND MORE @ www.heavyhitch.com 5% OFF WITH CODE GWT AT TRAC SEATS! www.tracseats.com SHOP: www.goodworkstractors.com AMAZON: www.amazon.com/shop/goodworkstractors SUBSCRIBE: ru-vid.com LIKE: facebook.com/goodworkstrac... FOLLOW: instagram.com/goodworkstra... MERCHANDISE: stores.inksoft.com/good_works_tractors_merch/shop/home *Discount codes cannot be combined with any other promotions, offers, or deals! **I choose to sell some products through 3rd parties instead of stocking items myself. Know that I will receive a commission if you choose to purchase through certain links. Thank you very much for your support!

@_DeFiNiTeLy_Not_BrAd_ Год назад

I appreciate that they actually list the price, having to email or call for pricing is a pain in the backside.

@freecycling6687 Год назад

Looks really solid and well built. In all honesty, I've been very happy with my Woodland Mills 6" chipper. It's not perfect, but its hydraulic feed is its "make or break" feature. Plus, it's got direct-drive via the PTO shaft, no gearbox needed. (Of course, that reduction in complexity is probably offset by the hydraulic feed system!) Edit: Just watched the Split-Fire video on this machine. They run their rotor at 2100 rpm, which is much faster than a direct-drive running at 540. That's an interesting idea, I'd bet it really does help prevent jams as they say. (Okay, final thought - the chips it makes look real good, very uniform in size and shape. Have to admit the WM isn't quite that nice in the quality of the chips, tend to get a long of "long slices" out of it.)

@GoodWorksTractors Год назад

I'm steering away from Made in China whenever possible. The Wallenstein equivalent (Made in Canada) chipper setup like that Woodland Mills is 4x the cost.

@freecycling6687 Год назад

@@GoodWorksTractors Yep, totally agree with that goal. Sometimes, as an individual, it's just not feasible. (And based on my own experience with WM, they're not just an importer that's passing through the "stuff" they're importing - their product support has been exceptional, and their documentation is accurate and comprehensive.)

@flash1259 Год назад

Doesn't look bad. Looks like the chute could be taller and swivel so the trailer might be left connected while you're using it. I'll stick with my Vermeer 935. I bought almost 40 acres connected to the land I already had. I wanted to clean some of the atv trails and make a few more. I ended up buying the 6" DK Power that Home Depot sales. I do wish it had electric start though. When you start getting long slices it sounds like you need to have your knives sharpened and the knife gap adjusted. I took my Vermeer to a dealer after I bought it for them to do that.

@PurpleCollarLife Год назад

Split-Fire is a great company. We have their log splitter and worked with Kyle to try out the chipper. Amazing machines all around.

@warped2875 Год назад

Courtney, it looked like it was kind of a struggle feeding some of those branches through that chipper. Not that it is a bad product, new designs and innovation is a good thing, but for the price point of the Split-Fire, I think I would be opting for a hydraulic in-feed unit, like a Woodland Mills WC46 or WC68, or even a WOODMAXX MX-8600. Keep up the good content!

@GoodWorksTractors Год назад

I would say the only thing I recall struggling with was the length of some of the brush. I should have trimmed it down. Many folks don't want more complexity. I can see that being a nice feature though too!

@hotwheelmanraven2289 Год назад

Love this thing pretty decent for Homeowner is good enough you could always trim down the branches that's Haram in wouldn't have to work so hard but otherwise impressed the tractor really handled it I was one of the first ones to buy a tractor Connecticut man I'll tell you what I love this tractor can't wait for the bigger one definitely need to get in touch with you for one of those little quick things on the back of them

@michaelroth3471 Год назад

Just got mine two weeks ago and absolutely agree with you! It's a chipping beast! Very well built chipper from Split-Fire!

@m.h4664 Год назад

Enjoy seeing all the different attachments you show on your channel. That chipper was incredible. Have a blessed day

@OrangeismyNewGreen Год назад

I’m beaucoup impressed 😉, it’s a nice looking splitter and made in 🇨🇦 👍🏻. Great review Courtney 🙋🏼‍♂️🙂👍🏻

@GoodWorksTractors Год назад

Thanks as always!

@tannerfarmstead Год назад

Love your content man. Been watching for quite some time. I look forward to get a chipper and tractor one day. Your channel has educated me a lot on things

@scubatraveler100 Год назад

Thanks for such an informative video. I have never heard of Split Fire so this was an eye opener what a chipper can be.

@jerrycrofoot7770 Год назад

Great presentation; I chip all the time and I can see the benefits of a vertical shaft. Any comment on maintenance, how hard is it to change the blades and grease fittings locations?

@davidcarleton6928 Год назад

Good for you; putting wood chips on your trails. You won't regret it. They need to be redone from time to time, but they really make your trails more durable. Currently reworking mine.

@kylerayk Год назад

Fun video Courtney! I really like the vertical design and the speed increase due to the gearbox and belt drive combination. I have a few suggestions for Split-Fire... Create an on-board docking point so you can remove the chute and park it elsewhere on the machine for transport. Make the chute a little taller. Increase the ability to tilt the deflector downward more. There's nothing much more satisfying than feeding a wood chipper like that! In my case though, it only creates another material to dispose of. Burning the brush leaves a small pile of ash and I'm done with the cleanup. Would be great for people who have a use for the mulch! Thanks for sharing!

@GoodWorksTractors Год назад

Haha, yeah it is really satisfying. I've got a few large areas that could use chips. Probably be awhile before I run out of areas to put them. Have a good one Kyle!

@jakestarr2887 Год назад

Fantastic video and thanks for sharing. I now know what my next big purchase is going to be.

@AdamLProductions Год назад

That things is really impressive. I had a stand-alone Troy-Bilt chipper/shredder/vac and there's no way it could chip that fast or with material that size.

@bruceaplin Год назад

Congratulations on your new property. "We are just chipping away at it." Oh, nice, how appropriate. Hope you can deal with the trespassers. Good Luck and Merry Christmas! 💛

@jamesyates5191 Год назад

I was impressed on the self feeding with the chipper. I have a vertical blade chipper and you need to keep feeding it a lot of the time.

@markcole6475 Год назад

Definitely looks like the more hp fit the needs of eating the larger diameter pieces! One reason why I up graded to a L3902. I’ve been debating on buying a PTO powered chipper but I don’t do a lot of that often….at times I’ll cut a tree down or pull some bushes on one of my properties and would be so much easier getting rid of the waste vs burning it all.

@RCPSU4 Год назад

Personally, I think the ones with a shredder opening are a good option for the smaller stuff.

@TonysTractorAdventure Год назад

That looks like a very nice chipper. It seems to work much better than the one I have.

@keadog1838 Год назад

Make a cardboard template then cut a piece of MDF, etc to fit and clamp to inside back of trailer when chipping so it will act as a backstop for overshoot.

@GoodWorksTractors Год назад

That would work! I figured out a better setup later in the video with the trailer right next to the chute. Then, aiming the chute down. Those chips come flying out!

@warped2875 Год назад

...or, maybe adjust the deflector angle down farther. =O)

@qcan8468 Год назад

The ChipStop’s here!!!

@jimmerrithew453 Год назад

If you mounted a bracket on each side of the sidewalls, these could support a 24 inch high piece of sheeting. Start with the brackets close to the chipper, then slide the brackets and sheet away from the chipper as the trailer fills up. The sheeting would deflect the chips into the trailer.

@stevestock2439 Год назад

Nice demo. This thing is a beast! Pretty impressed also with the Summit subcompact it did very well considering it's horsepower limits. Enjoy your vids. Really like the horizontal rotor design, it just makes good sense. You are a good ambassador for this product.

@milesostrander25 Год назад

Looks like an interesting design moving the cutting wheel like they did. I like the emergency shut off that you can wire in to your tractor. I do have to say when compared to a unit like my Woodland Mills chipper with hydraulic feed, there is absolutely no comparison. I don't have to lift pieces of wood over my head to get them in the hopper, pieces of wood can't get sucked in too fast and bog down the tractor, the moment a piece of wood is caught by the infeed roller my hands are off and away from any danger, it has controllable variable feed speed and I can control the direction of the feed from the end of the poppers shoot in case of loading something too big or awkward. The discharge shoot can rotate 360° and is mounted higher to be able to get into higher trailers or trucks.

@Gnomoleon Год назад

Love my WC68 hydraulic infeed chipper ...

@540isilver Год назад

looks like for the price this will be hard to beat.i really like that you can have a trailler on the end of it to. on the farm we use a woodmaxx 9900 and its a beast!

@GoodWorksTractors Год назад

Thanks for watching! It is priced well. Love the trailer option too. Dang, that Woodmaxx is a big boy, haha!

@paule4696 Год назад

I have the Woodland Mills WC68. This looks like a decent tool but the WC68 is much easier to use. A lot of the stuff you had to stay there and feed would have just been drawn in by the WC68. The infeed is adjustable so it doesn't bog down the tractor motor. The discharge chute on the WC68 is higher and adjustable so I could have been directed much more easily into your trailer and it doesn't need to be removed to move the unit. BTW I really like your trailer.

@lainus167 Год назад

A place to attach the chute while driving/not using it would be handy. Like above the angle gearbox. Nice product

@GoodWorksTractors Год назад

Thanks for watching!

@fsj197811 Год назад

Chipping away at it?!?!?! Well done! Thanks for sharing.

@samandbritt224 6 месяцев назад

If UltraTec doesn't make a rear-loading enclosure for that trailer I would certainly make one to catch all those extra chips! That Split-Fire is an animal!

@davidlinux Год назад

I have had a Mighty Mac for about 10 years. I thought it was the best - its just been one upped. When I bought that it was around $2,400. I imagine now the 2 would be priced pretty much the same. Right now I have a 2025R. Once our new home is built my plan is to get a 3046R. This would really work well with that tractor. Merry Christmas to you, Chris and your families.

@kylesmith8769 Год назад

That is one impressive machine. It appears to be well engineered for ease of operation and maintenance.

@GoodWorksTractors Год назад

Agreed, thanks for watching Kyle!

@TomKD0QKK Год назад

I have a chipper that is rated 15 to 50 horse. I used it behind my old 8N and it was a struggle, always bogging down. Behind my JD 3043D the engine never even slows a bit, even chipping 6 inch logs. Horsepower makes all the difference with a chipper.

@GoodWorksTractors Год назад

Yes, there was a difference between bottom end performance and something with quite a bit more HP. However, even at the low end, it still performed well. Didn't bog it down very often.

@martyh299 Год назад

Courtney, there is a channel I am subscribed to called OGA Outdoors, Split Fire stuff is what he uses on a daily basis including this chipper. High quality stuff that does an awesome job! So glad you have found them and are giving them some notice as well! Merry Christmas to you and your family Courtney!

@joeh4295 Год назад

Have you done a review on that trailer? I've been looking at one like from Northern Tool but I've been hesitant. I'm in PA so shipping from you would be a bit much.

@GoodWorksTractors Год назад

Yes sir, here is a link to the video. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WjCpWeeIMiw.html Here's a link to the trailers on our website. www.goodworkstractors.com/?s=ultratec

@kipcudd7253 Год назад

Looks like a tarp on the front of the trailer that would you could stand up to keep chips from blowing past the trailer plus a taller chute and able to angle down more would help to. Maybe higher side boards also. Yeah that thing really shoots the chips out. Little Summit did great!

@GoodWorksTractors Год назад

Lol yeah those chips go flying! I adjusted the angle and position towards the end of the video and it worked better at holding them in the trailer. Thanks Kip!

@xtrem3climber Год назад

Wish I had seen this a few months ago! Ended up with a Woodmaxx 8800 - definitely solves some of the issues others have mentioned here. Larger capacity, hydraulic fed and made in USA. Not cheap...but something I will hold onto for YEARS. Chipping/splitting is one of the most cathartic things I do on my property - love having this tool! But...seeing the trailer set up...well now I just need another toy!

@rickmoulton4005 Год назад

It's a decent looking chipper, but I've been using a Woodmaxx WM-8H hydraulic feed with 8" capacity on my Deere 4066r and it's been great.

@johnmedlin5894 Год назад

I think it is a nice mid-level chipper, but according to their website, you have to pay extra for the steel discharge chute. In my opinion, that should be included with the price. I can certainly understand paying a little extra for the rear hitch and tool holder, but not the discharge chute.

@GoodWorksTractors Год назад

That's a fair point

@kelleyheard5790 Год назад

Very impressed well built

@bill29456 Год назад

Good video. I noticed early on the chipper over shot the trailer. Doesn’t it have an adjustable discharge shoot? The second half it seemed to hit the canter of the cart. Was that thru angling’s the chipper and cart of adjusting a nozzle?

@trcass1 Год назад

that thing is a beast. its a little loud though. i wouldn't mind having one for my little 1026R JD, although while its within range,, it might be a little underpowered. interesting they said to store it in a secure area....great video. thanks for sharing.

@benjaminmccubbins8882 Год назад

The utility of sub compact tractors can’t be overstated. The relative low cost along with myriad of implements available make them a great investment for someone with 5 acres or more.

@kevingebert4316 Год назад

That is one impressive BEAST! Beats that DR Power unit I had 10yrs ago no problem and it was hooked up to a 32hp Yanmar. That velocity shooting out is amazing even with the smaller PTO output. I bet it rarely clogs up too. Think the only con would be that loud whine you hear even when no branches in there vs other units are fairly quiet. Price isn't really that bad either. Wow... Thanks for sharing!

@bladewiper Год назад

I love the trailer hitch. I am surprised it is less than a conventional chipper.

@GoodWorksTractors Год назад

Yeah, trailer hitch is a smart idea for sure!

@Stu2366593 Год назад

Nice overview video. I may look into getting one of these. Would this work with a 2016 jD 1023E? Or is the HP at the PTO too low?

@cybrcow Год назад

So I’m looking for a chipper that would get a fair amount of use. This is in my price point. I do have a 1023e and it seems like the tractor might be light on power. Would I need to get the one with its own engine?

@steveprice4779 Год назад

When we bought our current home on 30 acres years ago I looked around the property and thought boy am I gonna need a chipper....so I went out and bought a very expensive gas powered chipper. After using it a few times I realized how much work it takes to operate. While complaining to a buddy at work he looked at me funny.....what I asked! Can't you burn on your property he asked...Beats me I said....So I found out burning was legal in the spring and fall...so we found a good place on the property where we could safely burn and burn as needed.....🔥🔥🔥

@ricklarade3593 Год назад

nice set-up, i would be making a flap so the material would go into the trailer

@GoodWorksTractors Год назад

Yeah, I adjust later in the video and it works better

@kahuna1247 Год назад

I also recommend mixing some leafy green stems with dry wood to assist the auto feeder.

@justanotherviewer52 Год назад

"Manuals? We don't need no steenkin' manuals!" That's a really nice chipper/shredder. I can see why they would be concerned with theft. You put some pretty big wood through there. I think, in your case at least, the discharge chute could be about 6 inches taller and the final piece able to angle down more. I wonder if a flap (rubber), over the discharge might help reduce the loss over the sides/ends of the trailer. As you mentioned, for the average property owner this would be great as a rental piece and not all that practical to own.

@NormCobbJrTourLife 10 месяцев назад

Nice video! Great drone work too! 🙂

@robb1165 Год назад

Hint on hooking up the remote kill switch. Many small tractors Y with a diode the seat switch and the other safeties (clutch, shift lever, etc). So to kill both circuits in one place you need to be past the Y to kill power to the fuel solenoid. Another option to kill both circuits is power from the fuse block side of both circuits. Would want to kill both in case the seat switch was stuck on.

@lcee6592 Год назад

Nice chipper! You had some pretty big stuff going in there. I could use that to clean up my 15 brush piles!

@WS-gc6df Год назад

Loved this video. Now my wife wants one of those. We'd like to see if you feel the gas version gives you the same results. We'd rather not have to deal with the PTO.

@goddukee Год назад

Great looking attachment. The other ones I've seen wouldn't do much more than broom handles. I had one years ago that required so much limb trimming it wasn't worth the effort

@MrDoyle07 Год назад

I love that one can put a hitch ball on that rascal. I will be looking over my WoodMaxx and see if there is a way to fabricate one onto that thing. That is a pretty good machine for only two cutters and no feed mechanism other than you, Courtney! 😂 Great video! And that little trailer is a hellacious teaser too. Me wife is making faces at me now… 😮

@mikeszwec9551 Год назад

I’m impressed. Can you raise the chipper and still use it safely? I’m thinking in terms of loading in a bigger trailer.

@kennyjohnson6875 Год назад

Nice set up

@GoodWorksTractors Год назад

Thanks for watching!

@markschmaus5580 Год назад

Looks fun to use !

@GoodWorksTractors Год назад

It was!

@Hereford1020 Год назад

That machine looks great

@nottingham82 Год назад

I would like to see a follow-up video where you take off the shoot and switch the reversible blades. Just curious on what the internals and the cutting mechanisms look like and how it compares to the bearcat that I have.

@keiths4874 Год назад

Pretty slick setup👍

@kurtheim7425 Год назад

Hydraulic infeed is the way to go. Looked like alot of work to feed broad branches. My b2601 powers my woodmax wm8h without bogging down.

@rickherald5364 Год назад

Go real life view of how that chipper works on small power machine. The fact that the rotor is on bottom helps that chipper, one draw back is when blades gets dull, makes chipping a lot harder. But looks like a good chipper

@feldhdleh Год назад

It's a fine machine for sure, and very well made by quality people in Canada. I think it also takes in things that my Woodland Mills WC46 could not, using an equivalent powered tractor. The Woodland is designed and delivered to market by a similar Canadian company, with its Chinese manufacturing plant delivering to their designed quality level and price point. Watching this demo, I think the Split-Fire has a few differences you may want to consider. The hydraulic feed on mine is a game changer. You simply do not have to do the handling, cajoling and pushing that Courtney does frequently during this demonstration. The Woodland feed chute is horizontal - dramatically easier to use and navigate than the vertical chute, I believe. And, the Split-Fire discharge chute is not adequate. It should be taller to work correctly with a trailer; otherwise, that is a major functionality miss. The Split-Fire and Woodland (and others I'm sure) are well designed but each has pros and cons at a given price point and overall quality level. My opinions only of course, if you find that useful in your own comparisons.

@frankbrun9539 Год назад

Nice set up. What is that dump trailer? Come in hydraulic?

@herbandjanagass6221 Год назад

What is the trailer you are using? That is exactly what I am looking for.

@motor2of7 Год назад

Needs a hinged connection on the discharge chute. Removing it every time you move the trailer would drive me nuts

@tcmits3699 Год назад

Another great video, very well made. I think the PTO chipper market might be a hard nut to crack. From the video that company looks to be top notch quality, I "wood" suggest maybe a 3pt wood chunker like in Europe. Hard to find in the states, I do love my chipper, but a wood chunker would be nice to have. Once again keep the videos coming.

@GoodWorksTractors Год назад

Just had to look up a Wood Chunker....that is a interesting piece of equipment. Never seen one before!

@thaddeustroyer Год назад

@@GoodWorksTractors agreed. Interesting indeed. That looks likes it would be good for wood burning stoves. Good burning size for them. I guess the ultimate would be to have a "wood chunker" feeding your spit fire "wood chipper"

@carrotsandrunning Год назад

wow those chips really come out of there at some pace.

@rcclassiccrawlers4368 Год назад

That’s kinda funny. Secure them cause they’re so sought after. Ha! The only Split Fire I ever heard of until now is Split fire Spark Plugs. Hey, just a thought you can take as you like. Turn your trailer around like you were to hook it up but turn the jack down so the rear raises up. That way the chips should hit the tail gate and won’t fly over the top edge as much. A question about the Chipper. If the chipper somehow jams up and kills the tractor is there any access points to open up to un-jam it while out in the field?

@oxford821 Год назад

Now I want a chipper! I’m not sure why people take the time to chip instead of just burning a big pile tho? Won’t the chips eventually just turn into mud on the trail ?

@rickjette9482 Год назад

Did you need to cut the drive shaft to mount it the first time?

@richardweihert6233 Год назад

Did you try leaving the trailer attached and see if you could chip direct. I understand removing the chute to clear the tongue while turning.

@kdegraa Год назад

This chipper sounds different to other PTO powered chippers. Most probably the cutting disk causes this higher pitched whine. That is interesting.

@dave.lawrence.3894 Год назад

A hungry machine.... Hope they sell well !!!..🙂😀👍🤞🙏

@GoodWorksTractors Год назад

Yeah, I believe they're a really good seller for them.

@dave.lawrence.3894 Год назад

@@GoodWorksTractors would like to know about many sold for 2022 then again for 2023!!!

@randysavage8963 Год назад

As usual good content and entertaining

@stephenphilbrook6239 Год назад

Wow! That is impressive. So, is it your impression that on a larger tractor, you could chip over the 4 Inch limit and not be breaking a bunch of shear pins?

@rudynegrete5658 Год назад

Split fire brand sell extras as option that is standard on any other brand wood chipper.

@curtanderson8655 Год назад

I deal with a lot of leaves in the fall, would that shred them down to a powder or is it more for branches?

@ranger6x660 Год назад

That is a very nice chipper.

@spiroschitiris2751 Год назад

I have a iseki tx 1300x im thinking to install one of these.... Witch PTO gear and how many rpm ?!

@texillini1 Год назад

I have a JD 1025R. I think the first tractor that you used would be equivalent, correct?

@KirtH27 Год назад

I could use one of these! Whenever I see woodchippers I think of the movie Fargo! You should have pulled out a manikin leg out of a wood pile and put in the chipper

@mikeferguson1393 Год назад

What's your thoughts putting this on a JD1023e?

@GoodWorksTractors Год назад

The Summit TX25 was 25HP, so you'd be a little lower yet. They do show it on a BX2370 which is pretty similar to the 1023e. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9KjGDFgrCi4.html

@lazylizard6532 Год назад

Load height looked 18-24 inches lower on the horizontal blade vs the vertical blade. Could you add measurements when you do the higher horsepower demonstration?

@TheMonkdad Год назад

I agree that the theft statement is more about bragging. Without taking the tractor as well it seems difficult to steal the chipper alone.

@GoodWorksTractors Год назад

Humble brag. It's in the operator's manual, not like it's on their website in the features, haha!

@mr.gtmsworld2494 Год назад

How does the pto run without operator on the tractor seat? My tractor pto will not work without me in the seat.

@GoodWorksTractors Год назад

Many, but not all, models have a procedure to operate the rear PTO without an operator. Might find the sequence in your manual or you could have a model without that feature.

@rockandrattleretreat5830 Год назад

I like would like to see that with a shredder, like my Wallenstein BXM32. While clearing for my house I had a lot of leaves to shred up. Can't do that with a chipper. How does that chipper do with small sticks? I got a lot of small sticks that just went through the chipper part intact, but when they go through the shredder, not much left of them...

@phillipbertrand8514 Год назад

Why are you not chipping with the trailer hitched?

@willieorpurt6317 Год назад

The trailer needs a pop up canopy to keep all chips in trailer. I have a idea, but hard to explain.

@GoodWorksTractors Год назад

It worked quite a bit better towards the end when I snugged the trailer right up to the chipper and pointed the chute downwards.

@michellatour150 Год назад

Please show what size chips it cuts and, can the size be changed by changing the feed rate.

@dalanbronnenberg Год назад

It could use an autofeed, but it takes those limby pieces pretty good. Nice chips! But being that close to the limbs all day will beat you to death. And It really wants a 40-50hp tractor.

@waynederby4684 Год назад

Courtney. I usually don't have much negative to say about your video's. You work very hard and ALWAYS produce a quality and informative product for your viewers. However I can't believe the incredibly small diameter your limited to with this chipper that you have chosen here. The brands that you mentioned in addition to a number of others that shall remain unnamed will chip up to 6 to 8" depending on model. Those that I have used are also competitive in price to the Split Fire and will work on larger material and are quality engineered in addition. Just Saying. Other than that my you and your family have a Merry Christmas ans Happy New Year !!!!