Tiger Tool, Heavy Duty U-Joint Removal

Подписаться 6 тыс.

Просмотров 26 тыс.

50% 1

Tiger Tool #10102 Heavy duty u-joint removal tool. Well, after a parts snafu, and
late night parts run to Freightliner, decided to go ahead and put this vid up there.
Cost from everywhere I have seen as of posting of this vid is 249.
Tiger Tool #10102 Heavy duty u-joint removal tool available at following:
Amazon for $249.00: amzn.to/2LF0Y1r
Tiger Tool.com 249 : www.tigertool.com/product/uni...
Tools on Amazon I recommend: www.amazon.com/shop/influence...
ref=ac_inf_hm_vp
Sunex Long 3/4" impact socket 224XD: amzn.to/2GbfyLq
Capri 1/4"dr Ratchet: amzn.to/2DsU3VM
Capri 3/8"dr Ratchet: amzn.to/2DpUXlH
Capri 1/2"dr Ratchet: amzn.to/2Dulb6S
Capri Metric Hex set: amzn.to/2sOb2MQ
Capri 88pc Master Bit Set: amzn.to/2IPD2GQ
Aircat 1056-XL on Amazon: amzn.to/2G1qqvt
Aircat Protective Boot: amzn.to/2BuCLIH
Terminal Tool kit: amzn.to/2EHcdpK
Capri Standard Hex Socket Set: amzn.to/2HhugB9
Capri 3/4" Impact Socket set: amzn.to/2Er6yRX
Capri 3/4" Impact Extensions: amzn.to/2FxrRR8
Capri 3/4" dr Air Impact: amzn.to/2DP8liV
Music:
TITLE: Real Ride by Nicolai Heidlas Music / nicolai-heidlas
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons.org/licenses/b...
Music provided by Audio Library • Video

Авто/Мото

Опубликовано:

22 июл 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@roberthasili1447 2 года назад

Just saw your video brother. Know the feeling worked from 7:00 am till 11.00pm replacing bearings, wheel seals etc. Last job replace a starter Kenworth, Cheap ass rebuilt cranked and quit. Take it back out install new ac Delco worked fine. Dead Tired.

@kiefferwebb142 Месяц назад

Came here while trying to get a nasty u joint out, our tiger’s are bent and slip right off 🥲 Praying we can get a tool

@scottpearsontoolsmore185 6 лет назад

Great video thanks brother. I am glad you have the tools to make life easier. I can remember the old way hammer it out. I never got the opportunity to use a tool like that. I know by the time you got done you barely had the strength to but it back up and not mess up. Keep up the great work see you in the next video thanks again brother.

@BeardedSeabee82 6 лет назад

Oh yeah, way easier than hammering out, and bit easier than cable styled ones too. And yup, was a hefty bugger to get back into place that late at night. Thanks for watching! Was hella long week last week to say least so youtube fell behind... finally startin to try and get caught up

@massachusettsprepper 6 лет назад

Awesome video and as always brother thanks for sharing.

@BeardedSeabee82 6 лет назад

Lol, thank yall for watching!

@TigerTool 5 лет назад

Hey @Bearded Seabee82 Great video! Thanks for sharing from the Tiger Tool Team.

@BeardedSeabee82 5 лет назад

No problem at all! Am huge fan of hd ujoint removal tool and yoke puller kit!

@BOHEMIANHUNTINGCLUB 6 лет назад

Looks like fun!

@BeardedSeabee82 6 лет назад

Oh, last wednesday was a heck of a fun long day lolol. Minus the whole having to run parts deal.... Thanks for wathin, hope yall doin well down south!

@TheTheomax 5 лет назад

Now that's a nice piece of equipment to bad the first U-joint wasn't the same. I think everybody has had a taste of cheap parts no matter what you do for a living. As always the same end result, Short life span and unwanted practice as in hey I gotta do the again.

@BeardedSeabee82 5 лет назад

Too very true indeed. Thankyou for watching

@timsworkshop85 6 лет назад

I hear ya man. When your getting down and dirty underneath a machine the last thing you want to deal with is cheap shit!

@BeardedSeabee82 6 лет назад

True to that, especially if it were to go out hardcore on the interstate... families meet undue end from crap like that

@AOKUrbanHomestead1 6 лет назад

Good video

@BeardedSeabee82 6 лет назад

thanks thack!

@juliogonzo2718 5 лет назад

Yup. Used to be a truck tech, now I just tow the shit :) I ordered wheel bearings from the international dealer and sent them Chinese things back when I spun it in the race on the parts counter and it had a rough spot. My boss was critical of me but not his ass if duals divorced the truck and killed somebody. Ordered timken from freightliner and put em in :)

@BeardedSeabee82 5 лет назад

I hear ya on that one, one of the eastern iowa penske locations had couple trucks a month apart from eachother where when on way out to the location i was at had that happen, was not a pretty sight and luckly no one got hurt. the 2nd truck, luckily the drivers pulled over to truck stop to check out vibration before wheel would have managed to burn itself off axle entirely... had to replace axle housings on both trucks and 1st one everything that was part of 1st drive was done for. DO gotta like timken, they have always made good parts

@juliogonzo2718 5 лет назад

@@BeardedSeabee82 lol I used to work for Ryder. After I refused to install the Chinese bearing I had told a guy at another location and they changed bearings on 20+ freightliners after one had a set of duals come 90% off. They were Chinese from the factory and trucks were hauling hazmat liquefied gasses. They didn't want to recreate the liquid nitrogen scene from terminator so they didn't fuck around and just changed them

@srdoberman 3 года назад

Got it Brother thanks.....Go Navy

@MarkWilliams-vp7xw Год назад

I know this video is old but another note on automann parts, bought a brand new walking beam from them and it wouldn’t go in, turns out the damn thing was bent straight from the factory 🤬

@justinbustin677 5 лет назад

Beat taking drive shaft out and putting it in a vise and sledge hammering the ends of the joint.

@BeardedSeabee82 5 лет назад

Have had to do that at another shop before... it sucked.

@briansmith5712 6 лет назад

Hey man, do you have a PO box or something for fan mail?

@BeardedSeabee82 6 лет назад

Shoot me an email at beardedseabee82@gmail.com

@ifitsnotbrokenfixit1193 6 лет назад

Thanks for the video Bearded. Taking one for the team tonight? Sounds like you need a new air fitting. Taking one for the team tonight?

@BeardedSeabee82 6 лет назад

Lol last wednesday night, finally got a chance to put this vid up lol

@tshaunscales525 5 лет назад

Where can I find the goggles u have on

@BeardedSeabee82 5 лет назад

You can find em on amazon here decent priced amzn.to/2CWJ8lO

@terrellscaife2411 3 года назад

You should also consider the OTC 7490

@BeardedSeabee82 3 года назад

Took a look at that particular.one and lookin at it... am tryin to figurenout how shell work on the half.rounds....

@terrellscaife2411 3 года назад

To me it’s just another option I have both styles of U joint puller’s because you never know what situation you might find yourself in and I have the automotive size one and the medium size one too

@terrellscaife2411 3 года назад

Yeah Brandon I got another one for you check out the OTC 5191

@terrellscaife2411 3 года назад

Yeah Brandon I’m not sure if you do a lot of wheel studs but the tool I have in my arsenal is the OTC 4295 OEMTOOLS 24235 and OEMTOOLS 24234

@BeardedSeabee82 3 года назад

Dunno if that is large enough to do semi wheel studs... but if it is, would definitly be better than sledge hammer method lol

@dodgesportsman772 2 года назад

Does it install the joints as well

@BeardedSeabee82 2 года назад

No, removal only, unlike smaller automotive u joints that may need to be pressed in, the heavy ones just need cleaning up with emory cloth and then tapped together with dead blow

@dodgesportsman772 2 года назад

@@BeardedSeabee82 I just bought the small version for cars and trucks. I will need to buy the press as well

@dodgesportsman772 2 года назад

@@BeardedSeabee82 I'm putting up my video tomorrow so stop by and check it out..thx

@ragrle 5 лет назад

NO Spicer why would anyone use different !

@BeardedSeabee82 5 лет назад

hell yeah, spicer all the way, especially after that evening, the hell with that cheap stuff

@MRSOMTHINBASIC 6 лет назад

That didn't look fun👀👍

@BeardedSeabee82 6 лет назад

Well to say last was an interesting way to end last wednesday lolol

@MRSOMTHINBASIC 6 лет назад

Bearded Seabee82 🤣👍

@anthonycrosier8824 5 лет назад

That’s how ujoints work smh....I’ve rebuilt driveshafts and you should’ve gave it a good whack on both sides after you installed them...they’ll be tight af at first sometimes u just have to give it a good hit works best in vice with the side ujoints laying in between but on top of vice if that makes sense as to not damage shaft

@BeardedSeabee82 5 лет назад

Well the #1 and #2 drive shafts on these trucks weigh more than i do, #3 d4ive shaft not so much. But have seen bad luck with the cheap $30 dollar ujoints the company sent us a month prior to this vid. Shop up north put one on a t4uck, lasted 2 weeks. Prior to we always installed spicer, and yeah, they are firm to a bit tight on install, but never had a ujoint be completely locked up upon install before... only the cheap shit our parts vendor sent us. Since then, Spicer only

@anthonycrosier8824 5 лет назад

Definitely agree spicer is only way to go!

@stevebrahms 6 лет назад

That job sucks! Did it once

@BeardedSeabee82 6 лет назад

it seemed to be the theme last week, i think that was the 4th one in a couple days , plus another one the following afternoon.... was pain in ass for sure