Тёмный

TIPS & TRICKS - DIY WADDING AND SEALING PAPER FOR APS CAM870 SHOTGUN SHELLS | AIRSOFT 

Special Weapons And Plastic
Подписаться 4,1 тыс.
Просмотров 6 тыс.
50% 1

TIPS & TRICKS - DIY WADDING AND SEALING PAPER FOR APS CAM870 SHOTGUN SHELLS | AIRSOFT
In this episode I’m going to show you how I, in a quest to save money, made my own wadding and sealing paper for CAM870 shells. I learned this trick from BalleBlom on the Airsoft Sweden forum. and he learned from someone else and so on and so on.
Share this video: • TIPS & TRICKS - DIY WA...
EQUIPMENT:
Old cutting board
Cereal box
BB-bottle cap
CAM870 shells: airsoft.tiger111hk.com/p27002/...
TOOLS:
18mm hole punch
Low-tech persuader
Sharpening steel
STEP 1: PRICE
The punch set me back eight and a half dollars on eBay, and since a hundred-pack of wadding and sealing papers cost twelve dollars, that means after a hundred and forty three point three, three, three, three… meh… A THIRD circles later, I’m back in black.
STEP 2: EQUIPMENT
All you need to start making your own discs is: a 18mm hole punch, some old cereal box or other cardboard source of appropriate thickness, an old cutting board that’s outlived its purpose, a low-tech persuader, a.k.a. hammer, and a sharpening steel.
Simply place the cereal box over the cutting board, then place the hole punch over the cardboard. Hold the punch in a firm, stable grip, and let loose with the hammer.
Once you’ve made 2-3 discs, simply poke them out the punch, more than that will be too difficult to remove.
STEP 3: MAINTENANCE
When you’ve completed your daily grind. it’s a good idea to sharpen it. Start with the inside of the punch and rotate the punch at the same time. Then do the same on the outside to keep the punch in good condition.
STEP 4: COMPARISON
Let’s compare APS’s store bought parts to my homemade circles.
The plastic APS wadding is faster to load, but due to its size, six fewer BB’s fit the shell.
My homemade circles are also cheaper and more environmentally friendly than the plastic bits.
STEP 5: PROCESS
With my homemade ones I first press a disc down into the shell, then I can add up to 18 6mm BB’s, I can use the cap from my BB bottle as a measuring cup, since it surprisingly holds 18 BB’s. But that is not all, you can also use the cap as a tool to push in the wadding and sealing paper.The paper discs takes some time to produce, but removing the need to buy consumables is really comforting. I will never run out wadding or sealing papers before a game!
Both methods work fine, the BB's come flying out the muzzle and generally do their job.
But I can’t attest to accuracy nor range, since I lack the facilities for such thorough testing.

Спорт

Опубликовано:

 

11 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 22   
@gk.spinoza
@gk.spinoza 5 лет назад
Excellent video! That's similar to how I make wads for reloading the shells for my vintage .380 caliber Crosman TrapMaster 1100 Co2 Air Shotgun.
@SpecialWeaponsAndPlastic
@SpecialWeaponsAndPlastic 5 лет назад
Thank you!
@patterson2537
@patterson2537 2 года назад
i've just made your tool and tried it very impressed
@SpecialWeaponsAndPlastic
@SpecialWeaponsAndPlastic 2 года назад
Glad you like it!
@sir5498
@sir5498 5 лет назад
Nice one
@SpecialWeaponsAndPlastic
@SpecialWeaponsAndPlastic 5 лет назад
Thank you.
@crazyhorsemusx7767
@crazyhorsemusx7767 6 лет назад
Very creative and well edited. SUBBED! I think your method is the easiest and most economical yet. I have to ask, have you noticed and decrease in range or power? Seems like the cup wad method wouldn't build up as much pressure pushing the BBs, regardless it's awesome how many more you can fit in here lol. Greet job 👍💥
@SpecialWeaponsAndPlastic
@SpecialWeaponsAndPlastic 6 лет назад
CrazyHorseMusX Thank you for subscribing! I haven't noticed any decrease just by eye guestimations. I would need to thoroughly measure it at a range to make sure. But it works, and the spread with ~18 BB's is handy. Stay tuned for more!
@crazyhorsemusx7767
@crazyhorsemusx7767 6 лет назад
I'll have to give it a shot when I catch the chance. Thanks again :)
@nickolaypalamarchuk4100
@nickolaypalamarchuk4100 4 года назад
OMG! I heard that they use 4.5mm plastic BBs to encrease ammount of bbs in each shell. What if combine your DIY wads and 4.5 BBs tip? Thats gona be a swarm of HELL per shot! =))))
@SpecialWeaponsAndPlastic
@SpecialWeaponsAndPlastic 4 года назад
I have contemplated usin 4.5mm plastic BB's as well. Could be very useful in close encounters, but their effective reach will be much shorter due to air resistance.
@sjoerdb1505
@sjoerdb1505 3 года назад
Yeah that punch is hardened steel. That file is not doing anything except maybe messing up the edge slightly. Just leave it. A punch is plenty sharp for cutting through cardboard thousands of times. That being said good vid.
@RVsoloman5000
@RVsoloman5000 3 года назад
Great video! Where can I get the hole punch tool you used? Or a similar alternative.
@SpecialWeaponsAndPlastic
@SpecialWeaponsAndPlastic 3 года назад
It was quite easy to find online. Or visit a well supplied craft store.
@GuyInc0gnit0
@GuyInc0gnit0 3 года назад
Nice Video! But don't you think you're meant to push the cardboard cutouts UP through the punch instead of down? That way you could punch out way more than three until you have to remove them..
@SpecialWeaponsAndPlastic
@SpecialWeaponsAndPlastic 3 года назад
Tired that. Injury was incurred. 2/10, would not recommend.
@klm20079
@klm20079 2 года назад
so 5 yeares later? how it works my friend?
@SpecialWeaponsAndPlastic
@SpecialWeaponsAndPlastic 2 года назад
I have very little to complain about. No jams in my barrel, cheaper than APS's ready made sheets. Occasional sharpening of the punch, but very doable.
@klm20079
@klm20079 2 года назад
@@SpecialWeaponsAndPlastic the Cardboard of cerealboxes is just the good thickness or have you tryed others too? Got myn now only got shotguns doublebarrel pistol goblin deuce, aps cam 870 sai, xm26 mass
@souswodaem1
@souswodaem1 2 года назад
@@klm20079 I have personally used his method with great success, but the paper I use is just a thick cardstock that you can find at stores like Walmart. You can buy different thicknesses there too.
@samperfi1102
@samperfi1102 6 лет назад
good for MKII?
@SpecialWeaponsAndPlastic
@SpecialWeaponsAndPlastic 6 лет назад
SAMPER FI: Original APS wadding and seal parts work in both MKI and MKII, so this should work too. But I don't own a MkII shotgun, so I've been unable to try myself.
Далее
MODIFICATION - APS CAM870 MASTERKEY | AIRSOFT
7:16
Просмотров 13 тыс.
TIPS & TRICKS - REAL FURNITURE ON WE M16A1 | AIRSOFT
4:51
Who Can Break Most Walls? Ep.2 | Brawl Stars
00:26
Просмотров 375 тыс.
#wrestlerlife
0:14
Просмотров 9 тыс.
Cam870 shell teardown *reupload*
9:37
Просмотров 2,3 тыс.
UNBOXING - DOMINATOR DM870 | AIRSOFT
8:48
Просмотров 6 тыс.
DISASSEMBLY - WE M4A1 UPPER | AIRSOFT
5:03
Просмотров 54 тыс.
Paper patching bullets for my 1887 Martini Henry.
3:48
How to Quad Load Your Shotgun Ep 1514
7:14
Просмотров 1,3 млн
APS Airsoft CAM870 MkIII Complete Guide & Review
41:11
TIPS AND TRICKS - GHOST LOADING APS CAM870 | AIRSOFT
2:16
Самый Безумный Спор 😱
0:42
Просмотров 2,4 млн