TK Racing Sim Triple Monitor Stand Review & Fix 

Hey man just wanna say, couldn't do it without you. You rock thanks a lot

Bro is out here doing the lords work! I was hesitant on getting this stand because of the reviews, but I think I might take a chance. Can't beat 250. Thanks man

I was considering this triple monitor mount, but not any more. I’ll gladly spend more to get something better designed.

Dude you are a life saver. started building this and it didn't look like my 32" monitors were even going to line up at all with how they want you to build! Couple notes: - I put the base "feet" pieces "flat" (wider than they are tall), rather than standing up like you have them, that seemed more stable to me but idk. - The width you mentioned for the piece holding the main monitor (11" IIRC) was off for me. With 11" on either end, I wasn't getting the 24" in the middle i needed. I needed like 9" on each end measured to the column pieces. anyway, great work! This is a huge improvement and definitely makes it save a little space as well!

Pulled the trigger on buying this mount..end up using 8 mounting brackets to the monitor bar and uprights..I can’t do 12 coz of the 60 degree angle I have..good thing I saw this video..money saver..great work bro. Thanks!!

Just picked this up today at micro center. Tried the normal setup with 34 inch monitors. What a pain!! Outer monitors sag like crazy. Gonna try this tomorrow. God this is a PAIN in the ass.

I just bought this same stand today and have mostly assembled it using your method. It's surprising that this isn't how it's meant to be assembled.

Gonna follow ur instructions only difference is I’m getting the Simlab vario adapters for the rig excited to see how it turns out

Thanks for this! I'm looking to pick one up. Do you know the width of the space between the feet? I want to see if my Playseat Trophy can fit between the legs this way. Also, how thick are your VESA spacers? I found some on Amazon that's 1 inch thick. Thanks again!

I did the same with this stand after purchasing it, I noticed right away that a few things needed to be changed. I run triple 27" monitors at 60 degrees and the lateral arms for me are inside the uprights. I probably could have put them on the outside, but it would be a tighter fit for my rig.

I recently just got this due to this video, I I was wondering if you needed to use the screw m8-30 at all?

Thanks for sharing! Please also share a link to the transparent bezels you used to blend the edges of the monitors together.

Hello @yonkersracing I bought the single monitor version of this product. Do you think it'll be able to hold a samsung g95c 49" monitor? Which weighs approximately 25lbs?

Thanks for the video. I've been wanting a Triple Monitor Stand and stumbled onto this one while browsing for some monitors on Micro Center's site for only $199. I'm picking it up today with three 32" LG monitors. Are you running 32" monitors on your rig? You got a nice setup sir.

Great video! I just set mine up yesterday and questioned the assembly method the entire time. A question... What angle did you end up with between the back rail and the outer arms? Thanks for sharing!

Hey I have the exact same monitors that you’re using. What size screws are you using for the mounts, to mount the monitor to the actual rig. Mine do not seem to work if you can help me out

It appears they have changed the vesa mounts. Mine has no adjustment whatsoever. Just a flat plate that mounts to the aluminum profile.

Hey! How has it been holding up?

Yo what are the angles on your monitors? Trying to get a 60 degree angle is that possible with your setup. Please understand its al pronounced Kaaaaaa naaaan not cannon

IDK. Those 90 degree elbows are all thats holding the weight of the monitors and theyre cheap cast metal, I wouldnt trust them. I have already seen one case of them breaking on this stand and sending 3 monitors crashing to the floor, destroying 2 in the process.

Most important part is setting the angle that no one ever shows. smh