Top 5 Performance Mods for Horsepower

Подписаться 57 тыс.

Просмотров 791 тыс.

50% 1

MODS SEEN IN THIS VIDEO:
AEM Brute Force Intake System - amzn.to/2GwEpdo -- **NOTE** Keep in mind an intake will give you a bit of grunt (sound), but ALONE, it is not a mod that you will actually FEEL any power. It's just a starting place. Once you add a high flow muffler AND get it tuned, you will start to feel the difference.
Flowmaster 50 Series Delta Flow Muffler - amzn.to/2GxAMDZ
Edge Products 85350 CS2 Gas Evolution Programmer - amzn.to/2GvUi3I
Speed Engineering Long Tube Headers - amzn.to/2FIt2Of
COMP Cams 54-451-11 XFI Xtreme Truck 208/212 Cam for GM LS GEN III/IV - amzn.to/2DvRiRN
**** YOU DON'T HAVE TO PULL THE HEADS TO DO A CAM SWAP *** I was not aware of it at the time, but they make a great tool for that: amzn.to/2RywhAh
Power Stop KC2010A-36 Front & Rear Z36 Truck and Tow Brake Kit with Calipers - amzn.to/2FTv5CF
Long Tube Headers Sound Before & After / In & Out Chevy Tahoe - • Long Tube Headers Soun...
Other Videos in the Top 5 Series:
Top 5 Performance Mod video: • Top 5 Performance Mods...
Top 5 Exterior Mod video: • Top 5 Exterior Mods Ch...
Top 5 Interior Mods Video : • Top 5 Interior Mods - ...
Did you like this video? If so, please consider becoming a Patreon Member to support this channel. It will help me bring you more videos like this. Here is the Patreon Link: / tahoesteve

Авто/Мото

Опубликовано:

14 мар 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 830

@juanvillalobos952 4 года назад

I will always take car advice from a guy wearing a in n out Burger shirt

@TheFaithtrix 4 года назад

In all likelihood the back of his shirt has a street rod on it. Most In-N-Out shirts do.

@juanvillalobos952 4 года назад

@@TheFaithtrix I didn't know that but still lol

@TahoeSteve 4 года назад

You're correct. A 67 GTO if i remember correctly

@migueltorrez3594 3 года назад

No fuckin shit!

@skymonkey30 3 года назад

Well I guess it's a good thing I like In-N-Out Burger. So maybe I should listen!

@DONTCALLMETHAT 3 года назад

I'm so glad I found this video. I've been torn for weeks over how I want my 04 to sound. Now I know. Thank you so much and I love the way your truck sounds.

@TahoeSteve 3 года назад

Glad I could help and thank you

@jackdarren9801 2 года назад

Cold air intake Headers and Flowmaster Bigger TB 50lb injectors High performance coil packs 8mm wires and good platinum plugs And get a tunner boom easy and you've gained 100hp that way for around $2000

@novaturient5169 5 лет назад

Very, very great video, especially for us fellows looking to be steered in the right direction in regards to where to begin, what to expect and what to look out for. 10/10

@TahoeSteve 5 лет назад

comments like this keep me going, thanks for watching!

@l.b.stringfellow2413 2 года назад

Fantastic realistic suggestions !! Great job

@fckrgy1 5 лет назад

Awsome video my guy. I have an 04 1500 z71 sillvy and i plan on doing these bolt on mods as well. You just told me everything i needed to know!

@cymatic83 5 лет назад

This is SO helpful. Thank you for the crystal clear and concise breakdown.

@TahoeSteve 5 лет назад

So glad to help. Thanks for watching!

@gregorydennis3107 3 года назад

7:34-7:38 great info buddy appreciate it all love the cam sounds btw 😂

@TahoeSteve 3 года назад

Glad you enjoyed

@moncier77 3 года назад

I have done the intake, cam and lifters/springs and rods, tune, high pressure spring in oil pump, new cats with rear delete. Next long tube headers and flow master 50. I’m shooting for 450

@nigelmccure6640 3 года назад

learned something brand spankin new about Tuning an engine bud so thanx man so much appreciated buddy because I take everything that you just said to heart bud and would absolutely follow your advice when it comes down to tuning my engine

@TahoeSteve 3 года назад

Glad to help

@nigelmccure6640 3 года назад

@@TahoeSteve yours truly man thanx again buddy because I have been doing it wrong all of these years man now I have learned how to do it peropley now

@keokimerseburgh3041 6 лет назад

Thank-You, For Sharing Your Expertise Steve, I Appreciate You... I Just Love The Old School Mod's, And I Can't Agree Enough, The Cam Make's A Big Difference Of The Old Classic's... Keep The Video's Coming My Friend.

@TahoeSteve 6 лет назад

thanks so much! appreciate the views!

@charleswilliams3979 4 года назад

I liked how you presented everything, not going too wild& costly !

@TahoeSteve 4 года назад

thanks

@albertmedina812 3 года назад

Thanks for the video Steve 👍🏽

@Angel_Ventura915 Год назад

I've got a Spectre cold air intake True dual exhaust with cherry bomb glass packs I need to do headers. Good video bro

@Erob1727 6 месяцев назад

Thank you, Steve. Just ran across your channel. Great video. I have a 97 Chevy OBS short bed, and an '03 GMC Sierra ext. cab. Everything is stock on '03 Sierra with 5.3 and only 85,000 miles. Will try your performance ideas out on it. The '97 has a rebuilt V6 vortex with Flowmaster 50s with duels on it. Love the sound. I need more horsepower from the V6. Will definitely try your ideas. Will subscribe and continue to watch your videos. God bless.

@larryakimseu 5 лет назад

Hey bro.. really like this video. Thank you for sharing. 2016 Silverado Z71. Boom!

@jerryjoseph1866 6 лет назад

Great info Steve...I greatly appreciate your take and the clear explanation of the reasoning behind your mods.

@TahoeSteve 6 лет назад

Thanks so much for watching. Comments like yours help keep me motivated to keep making videos. Much appreciated!

@TrishaXuk 4 года назад

Solid advice, no-nonsense delivery. Love it!

@chrisford2604 4 года назад

Trisha Xuk don’t u just look tasty lol

@TrishaXuk 4 года назад

@@chrisford2604 thanks chick. Too kind ☺️.

@Sn99kwsb 3 года назад

Upgrading the throttle body and intake manifold is a huge plus also

@darrylcampbell5140 4 года назад

I have a '00 Silverado 2500 (not the HD, so it's 600lbs lighter) 6.0ltr,4l80E transmission, 4 wheel disc brakes, posi track rear end. I added a K&N, Flowmaster, shorty smog headers, high output coils, and a Diablo engine tuner. It is a work truck and a total sleeper!

@gabejohnson1245 4 года назад

nice, I have a 1991 454ss, its a REAL sleeper

@41663 2 года назад

I did the the cold air intake last year and Ill be leaning towards the exaust and headers when I hit the lotto. Thanks for the info

@kkingquad 4 года назад

I put a 40 series FM single in/duel out and it sounds great! I need to definitely upgrade my intake .

@TahoeSteve 4 года назад

and tune ....

@joshuacataldo2612 Год назад

2014 Camaro SS here. Muffler delete (increased my exhaust by approximately 4 db), K&N cold air, removed the resonator for an X-pipe, BBk shorty tuned length headers and a Power Wedge. Amazing throttle response! Great higher end rpm response BUT I now need a tune. Steel braided brake lines stop this car hard.

@kevinhernandez1301 3 года назад

thank man really helped me get a idea we’re to start with my build I got a 2000 Tahoe

@samueldesbiens2524 3 года назад

Thank you for the info Steve. I just bought a 2003 s10 small block and studying as much as I can to restore and improve upon it.

@TahoeSteve 3 года назад

Congrats on your buy. I have a 06 Colorado and would love to stuff a 5.3 in that

@pmotorsports8276 3 года назад

Carburetor or fuel injection?

@samueldesbiens2524 3 года назад

Injection

@coolcatsgarage558 2 года назад

Great video, Thanks Steve!!

@higiniosanchez9532 2 года назад

Thank you !I’m excited to get some work done on my truck your ,video will help !☺️

@TahoeSteve 2 года назад

Good luck. Have fun !

@wheeliebiker4941 5 лет назад

i love the channel bro keep up the good work :)

@TahoeSteve 5 лет назад

thanks so much. Thanks for watching!

@wheeliebiker4941 5 лет назад

@@TahoeSteve nah thank you for such a helping channel

@pporras 2 года назад

Hell yeah thanks Steve! Doing everything you said to my suburban 🤘🙂

@jayrox1726 2 года назад

Yes I was waiting for brakes & suspension thanks for the tips

@TahoeSteve 2 года назад

Anytime

@K1DWOLF 2 года назад

Glad I found your channel

@andreyross4642 7 месяцев назад

Thank you sir. Well done!

@johnnytv7620 2 года назад

Got a summit racing turbo flow exhaust, definitely recommend for all 1995 and 6 Silverado owners. It’s a cat back but it makes the truck sound way better with a nicer growl to the engine.

@efrainsaucedo7872 5 лет назад

Congratulations Sr. That is a wonderful Chevy!!! And a great video

@TahoeSteve 5 лет назад

thanks for watching!

@genarodelacruz1017 4 года назад

@@TahoeSteveI have a 2013 Chevy Silverado LS 4x4 engine 5.3 I want to upgrade "fast and a good sound" what can I start with??...

@TahoeSteve 4 года назад

@@genarodelacruz1017 if you want that muscle car sound, add a lopey cam and open up the exhaust

@miketho217 2 года назад

Love it, definitely doing headers, and possibly a cam swap but I’ve never done a cam swap so I’ll just wing it😂

@mostlymagical3220 4 года назад

#1 best mod for power: a turbo the size of Jupiter.

@battyboy305 4 года назад

Why not pluto

@TahoeSteve 4 года назад

Jupiter might be a bit big. it would take forever to spool up. I am gonna agree with the guy who said pluto.

@gpromburgh 3 года назад

Ya but With the lag of Olympus Mons

@anthonyzepeda1389 3 года назад

Stock engine with a huge turbo ? Doesnt sound safe for the internals lol

@Duke_of_Prunes 3 года назад

Great list. I probably would have listed a tuneup and oil change as number one, but technically I guess that is more maintenance than performance mod.

@tysoncayaditto6851 5 лет назад

Great info Steve. Very helpful

@jd1029 5 лет назад

Have a 2018 Silverado Z71 with 5.3L, added the MBRP ehxaust, really makes truck more fun to drive. Not too loud and no drone in V4 that I can tell.

@TahoeSteve 5 лет назад

Thanks for watching

@turnerway14 5 лет назад

Go ahead and tune the V4 mode out!!! It can create a lifter nightmare and Chevy is not helpful unless you’re dropping 2-3k in their shop. Google lifter failure V4 mode on CarGurus to see how many people have been screwed!

@coltonjacobs5383 4 года назад

turnerway14 I second this. I don’t know why GM decided to have a “V4 Mode” in the first place.

@calvinlayport3127 2 года назад

IV got a old 1996 Silverado first up grade IV done so far was putting my injectors at the valves instead of behind the throttle body next headers those two made a big difference next I installed 21/4 inch pipes from the headers about half way back into the pipes that were already on the truck and that made another big difference my next mode is going to be gears this truck has 308 gears very high for my taste 373 would really wake her up iv also running true possi track rear with the help of a minny spool she will get up but with 373 or 392 it's gonna really haul ass but to be honest Im still old school and wish I'd went to a 4 barrle carburetor instead it stops a lot of people because of the 4l60 transmission but it can be wired to work with a carb still have to keep your pcm but the tranny will shift

@dakotabrown1741 3 года назад

Mufflers are actually restrictive & cause back pressure, the best Exhaust Systems are X Pipe for low end H Pipe for high end. X Pipe has good Scavenging. Also I'll give you another major Upgrade pointer that increases power is Ported Intake manifold & Ported throttle body.

@dakotabrown1741 3 года назад

@Green Bastard GPE on EBay sells ported parts, you can find parts brand new CNC Ported, but you can Port them yourself however Id do research on Porting before attempting, number 1 rule of thumb always Port Match

@tylersnear4856 3 года назад

Great video- thanks. When you swapped out the cam, what did you have to do with the ECM? Did you have to re-program? If so, with what?

@kevinAuman1 5 лет назад

Heck yeah, I have an 03 GMC sierra 2wd 5sp with the 4.8L and shes already wearing Gibson headers, full Gibson catback and a cold air intake, tuned on a dyno all I need to do now is get a decent camshaft and if that doesn't tickly my fancy the procharger kit is coming after that lol

@Andy-hw1fl 4 года назад

kevin auman how much power does she make?

@richk320 5 лет назад

Great video,thanks!

@TahoeSteve 5 лет назад

thanks for watching!

@muntercota5423 2 года назад

Sweet man thanks again

@brianhernandez3798 5 лет назад

Thanks for your time and knowledge...

@TahoeSteve 5 лет назад

thanks for watching!

@HookinwithGrump Год назад

03 Yukon I’ve done muffler delete adding cold air intake.. do I need to tune after I add long headers and do I have to cam swap if I do long headers?

@edwardo1507 2 года назад

Hey Steve...i have a 2004 Tahoe LT 5.3 Gas....Like your video..I have (not installed yet) an AEM Brute Force CAI (Gunmetal), Jet Performance Mod. Stage 2, and Borla XS Pro Touring muffer...Cant wait to see results..by the way Steve, how much HP gain did you get? Stock on mine is 295 according to Chevy/GM..

@jeffmillerjr6086 5 лет назад

I think it's pretty cool. this guy's just helping every numb skull that can't think how to modify his car. he's a cool dude. I'm a numb skull fyi

@TahoeSteve 5 лет назад

i'm definitely not a pro. my thought is that if I can do it, anyone can. I am here to encourage noobs at diving in and going for it.

@hellofromgatsville8 2 года назад

Thank you for the help. I have a 2002 tahoe that I'm thinking about either selling, or putting in lots of money to make it nice

@steverussell6642 4 года назад

New to upgrading cars but leaned a few things here 👍

@TahoeSteve 4 года назад

I'm glad. Thanks for watching!

@simmons527 2 года назад

Steve how about a pedal Commander? What do you think? I've did the air intake (K&N INTAKE), Bora cat back system and the Diablo tuner. I have a 2014 cts coupe not sure of my hp after, but beat any same cars with mods.

@Huckyuu 4 года назад

I’m going to assume you kept abs when you did the brakes correct? Btw I have a 01 Tahoe and your videos are very informative on the crap I plan to do to mine so thank you sir

@TahoeSteve 4 года назад

Yes. And thanks!

@felixguzman2118 5 лет назад

Steve, thank you for sharing your knowledge, I just subscribed, please keep coming out with these instructive videos. One question, I have a Yukon XL 2500 6.0, and I've got a lot of miles on it (267k) do you think it's time for an engine overhaul? Thanks in advance.

@TahoeSteve 5 лет назад

That is a very subjective question and the answer is impossible to give you an honest one. If you have the $$$ and want a project, do it! if your'e engine is giving you lots of problems, consider doing it - BUT it is a very time consuming process. took me months (waiting for engine to come back from machine shop, ordering parts, etc). An alternative is dropping a new engine in. Having said that - if you are strapped for cash and the thing works, keep driving it. I'm a crazy man dropping all that cash into an old vehicle. But i can't afford a new one and i LOVE my old truck. That's my two cents. Good Luck!

@huejass8932 4 года назад

Get your oil tested and that can tell you what the condition of the internals are like.

@hovabell3924 3 месяца назад

U have a 2009 Tahoe I’m going to look into this

@mttbear 5 лет назад

I selected the link for the brakes but it’s saying that it doesn’t match with my ‘04 Tahoe.

@lottdawg515 4 года назад

awesome information Steve! love it. I just pick up 02 Tahoe of $1k. Engine is still great. Cant wait to sup it up.

@TahoeSteve 4 года назад

Enjoy it

@richmondwiggins3919 2 года назад

I was waiting for that spider he keeps looking up at to come down. Thanks for the advice.

@TahoeSteve 2 года назад

He's still up there!

@twinforce_fusion6560 3 года назад

On modern turbo cars: Tune w/93, intercooler, down pipes/w/X-pipe mid exhaust pipe + cat back, CAIS and sticky 200 UTQG or less tires. These are the top five,...then bigger turbo, DI fuel pump and DI injectors for E85.

@TahoeSteve 3 года назад

@Evoskywalker 2 года назад

So far I've done a 102mm lsxrt intake manifold a 92mm tb ,Cai, Texas speed cams 24 inch rims 3 7 drop, injectors next upgrade is long tube headers 🤣

@timschlageter1502 4 года назад

Great video! To the point!

@TahoeSteve 4 года назад

Thanks for watching!

@loganryan1317 4 года назад

Ron Jeremy, love this content.

@TahoeSteve 4 года назад

thank you, (i think). glad to say I have lost a lot of weight since this video.

@loganryan1317 4 года назад

Tahoe Steve i promise u it wasnt a insult on weight or anything man lol ron jeremy is hilarious an im pretty sure im bigger than u were in this video

@TahoeSteve 4 года назад

@@loganryan1317 All good!

@booyow3886 Месяц назад

Didn’t know Ron Jeremy knew so much about cars n trucks

@cathy4444 2 дня назад

haha..this younger generation dont know who ron is

@big-patria-lo3508 2 года назад

What about the crank pulley/harmonic balancer ? Or throttle body spacer/bigger throttle body,Cat delete.

@arttafil6792 4 года назад

Long tube headers are great for low and mid range torque.

@traviscarter1461 3 года назад

Brakes are considered maintenance with some upgrades go to slotted rotors and four-piston calipers semi-metallic pads

@TahoeSteve 3 года назад

@flyingmunk8956 3 года назад

Yeah those power stop evolution brakes are really good. I did them and they are drilled and slotted and have the cool red powder coat. But I about went through the dash after switching from stock to those

@TahoeSteve 3 года назад

i didn't feel that much difference myself, but they sure are purdy, and they do work.

@flyingmunk8956 3 года назад

I also went from worn out brakes to all new. Did you do the beeding process ?

@flyingmunk8956 3 года назад

I got the carbon fiber ceramic blend brake pads also. I dono if you did or not

@eddiewaters5445 5 лет назад

I would love to share the progress of my Tahoe with you. I have before and after pictures from when I bought it in April stock. And what it looks like a few months later with some wrench turning and money spending.

@TahoeSteve 5 лет назад

please do. Thanks for watching!

@eagleeyepitts7803 3 года назад

I put flownaster dual straight pipes on mine. I could tell a difference in horsepower from stock to the new muffler and pipes I put on. I forgot the specific name of them

@TahoeSteve 3 года назад

cool

@lukemcelheny9789 2 года назад

I like this guy

@BBslider001 5 лет назад

Nice to have found your channel Steve. Great info. Are you in CA? If so, how did these mods affect smog testing?

@AlecFoster103 4 года назад

You can't have them if you live in California

@michaelm.6955 4 года назад

@@AlecFoster103 yes if you get the CARB approved ones. They come with a carb number.

@sharpie132 2 года назад

If your going to add cold air intake, then your going to need a good tune like hp tuners

@mattquarles7029 2 года назад

not on a ls. you can add the maf directly to the set up and it actually gain a nice bit of pep and sound.

@TaylorMadejdm1975 3 года назад

Hey Steve did you wind up losing your catalytic converters when you put on your long tube headers and Cat-Back exhaust...? I realized with an HP tuners you can tune out the catalytic converters but didn't know if the fuel mileage went up after removing them if you did..? 👍

@TahoeSteve 3 года назад

Yes, when i installed the long tubes, i ditched the cats cause i am in a non inspection state. However, after getting sick of smoking myself and everyone around me out at stop lights, i welded high flow cats back in. Best of both worlds!

@bluu9040 3 года назад

i have a super 10 on my silverado i wanna put headers on it i think it may be a little loud

@jonathanelizalde6566 2 года назад

Where did you purchase the rims? I ask because twoof my middle cap rims were kicked of so I want to replace them?

@jarrettmorris4692 4 года назад

Cam heads intake that’s where the power is made and a real laptop -dyno tune.

@TahoeSteve 4 года назад

Agreed but this video is targeted for the beginner looking for a place to start (both in cost and complexity of project).

@tylerdass-herod3253 Год назад

I got a 🐈 delete and I did the restrictor plate delete on the throttle body, next is a proper intake what else should I do? Is a muffler even necessary since I don't have a 🐈

@arttafil6792 4 года назад

Have to be able to whoa all that go!

@TahoeSteve 4 года назад

i agree.

@timschutte8310 5 лет назад

, I agree totally except I would say a turbo charger or super charger or pro charger before a cam swop out. but good video. love your truck and especially your rims !!!!!!! I hate shinny big chrome wheels and I totally love your choice in rims !!!!!!!

@jonshelley1079 5 лет назад

Gotta have the thump thump. Cams where the 3rd mod I did to my mustang after I bought it. Also my trans am and single cab silverado both had cam swaps. The power and rpms is nice but the sound at stop lights is even better.

@banga8080 5 лет назад

Cool vid

@503gv2 3 года назад

You know the best cold air intake? For 2010 Silverado 1500 5.3l vortec? That puts more HP and better performance?

@123alpierre 3 года назад

What do you suggest for suspension?

@aemailaccount5108 4 года назад

Hey man I got a chevy impala 2013 ltz and I'm trying to build a shopping list. What about a throttle bodie

@stevenboswell4524 4 года назад

On the 5.3 engine in that tahoe, you dont need a special tool to pull the lifters up. The lifter trays will hold the lifters if you loosen the rocker arms and rotate them off the pushrods. Then you simply rotate the engine over 2 complete revolutions...lifters are now held in the lifter trays allowing you to remove the cam. But even removing the lifters manually, I'm not sure why you removed the heads....the lifter valley plate unbolts after you remove the intake.

@TahoeSteve 4 года назад

thanks for your input!

@andtewvasilakis9103 3 года назад

I know most people think it's a ton of work for a new cam, would you suggest going to a larger rocker arm if possible?

@TahoeSteve 3 года назад

larger rocker arm means new (taller valve covers) and by the time you do all that, you've spent more than you would on a cam for a fraction of the benefit. Get a Cam!

@jovani___ 3 года назад

Thanks cuhhh

@TahoeSteve 3 года назад

Anytime!

@lukarichter1991 4 года назад

I know this is a few years after you've uploaded this, but what year is your truck, what was the price of all the cam and valvetrain, and did you have to pull to do cam? Thanks

@TahoeSteve 4 года назад

2002, you'd have to price it out based on what you want(some links are in description). To pull the cam, you don't have to pull the heads. At the time I did my cam, I was unaware of the lifter retaining tool: amzn.to/2RywhAh

@BadBusiness.357 2 года назад

I got a Chevy Blazer with a 4.3 vortec I bought off Facebook for $1,200. I cut the muffler off and put a straight pipe on it, sounds good for 6 cylinder. Plan on doing the intake and tune next. I would love to learn how to do a cam swap and upgrade the valve train.

@badazzyoungstr954 2 года назад

Just know that heads don’t have to come out when you swap the cam. There is plenty of videos on how to do it without removing the heads.

@BadBusiness.357 2 года назад

@@badazzyoungstr954 thx that's good to know

@bignickola99 4 года назад

NEW SUBSCRIBER🙌

@TahoeSteve 4 года назад

Thanks, glad to have you.

@tmise50 2 года назад

I have a 1999 7.4 vortec with oval port heads. So you think headers, open intake and good mufflers for starters?

@TahoeSteve 2 года назад

And tune

@tommymills576 2 года назад

Can we get more Tahoe videos please

@VHR_FTW 4 года назад

i have a 2002 gmc denali 1500 utility sport 6.0 liter and napa didnt want me to do it because they said it might come off or the car might act up how can i pass that problem

@TahoeSteve 4 года назад

Get more perspectives. Everyone has an opinion.

@2486albaro 2 года назад

I have a 2002 Escalade with the 6.0 pro charger magnaflow exhaust catalytic converters removed idk if I should change my headers since I don’t have catts on it we remove the supercharger this year rebuilt with 928 performance parts and smaller pulley don’t know what else I can do

@tkong35 2 года назад

I bet that shit pulls hard!!!

@juanm448 2 года назад

Hi steve love ur vids i got a question and maybe u can direct me towards the right direction im looking to install a hidden winch mount on my 05 tahoe ls 4x4 ive seen images but no vids nor where to purchase one 🤔

@TahoeSteve 2 года назад

Not sure bout this one

@kennitheames401 Год назад

I would done number 5 a head port and polish job to still make it breath better

@steverussell6642 4 года назад

Good call on the brakes

@TahoeSteve 4 года назад

Thanks. I get ripped on including brakes because of the word, "horsepower" in the title. I'm still of the belief that if you're gonna make a bunch of "go-power", you're gonna need "stopping power".

@EBO47 2 года назад

What would 1 recommend someone do to a 1996 caprice v8 ,, where would you start?

@jeremywelch1490 2 года назад

Can I make My "04 Chevy TBLT w/4.2 strait 6 preform and sound better with only mods.? I was going to swap for a LS. But being a work truck and lots of Highway miles Cost of fuel for a V-8 doesn't sound so Cool. The 4.2 runs good but it's weak and soft spoken. What is available to beef this grocery getter up!