Touch Up! Rock Chips! Deep Scratches! KEEP IT SIMPLE!!

Подписаться 224 тыс.

Просмотров 245 тыс.

50% 1

This video covers the ever-so-popular subject of filling in rock chips and deep scratches. Newer cars such as Tesla and many other have soft thin clear coat. These troubled finishes are susceptible to rock chips. This video will show you how to address them.
Paint protection film is the best way to guard your automotive finish from rock chips. PPF s a high-performance polyurethane film designed to protect your vehicle from damage. The clear coated or matte film contains special polymers that can eliminate the need for constant polishing. It is designed to protect your paint from the impact of grime, chemicals and road debris. The self-healing properties of paint protection film absorb and correct minor scratch marks to leave your car with a shiny, smooth finish.
Fine Line Touch up pen...www.amazon.com/s?k=fine+line+...
Touch up swabs....www.amazon.com/s?k=touch+up+p...
Spot putty...www.amazon.com/s?k=spot+putty...
Wet Sand...www.amazon.com/s?k=wet+sand&i...
Royal Paint Brushes.....www.amazon.com/s?k=Royal+Pain...
Syringe Bottles.....www.amazon.com/Syringe-Bottle...
Data sheet and resource page for products by Henry Freeman! docs.google.com/document/u/0/...
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodetail
apexautosurfaceprotection.com
Apex Detail Support Group (FaceBook) / 946245059134747
#rockchips #rockchiprepair #autodetailing

Авто/Мото

Опубликовано:

27 ноя 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 170

@apexdetail85 2 года назад

How do YOU repair rock chips and deep scratches?

@1stfrompuertorico568 2 года назад

For a few cars I have used Drcolorchip 😄

@bigd9848 2 года назад

I use the same method as you Brian. I remember you showed us this a few years ago.Thanks ✊

@1stfrompuertorico568 2 года назад

@@bigd9848 I have only used some of his techniques when using regular colors like white, black, but still depends upon which white😄

@MyGuyKirby 2 года назад

I have used many of the same tools and have yet tried the body filler method, takes too long. I prefer Dr. Colorchip kits but pricey but very simple . It meets my acceptable rule of view from 3-feet.

@henryle4829 2 года назад

Hopefully the way you do cause Dr. Colorchip doesn't work great on deeper chips/scratches

@pjfan173 2 года назад

I’ve said it before and I’ll say it again Brian. Thank you so much for doing these educational videos and giving back to the industry the way you do. 👏👏👏👏👏

@mikeysan01 Год назад

Very informative...I think rather than take any sandpaper to my Camaro, I'll just go the "fill it in with a couple of coats of paint and be done" route! Thanks for the insights!

@satamanschmidt3428 2 года назад

Basically you got all of it right but there are some differences between how a detailer and a automotive painter would handle these scratches. 1) We never use lacquer putty. We would use a two part polyester glazing putty such as Metal Glaze or U-Pol Dolphin Glaze. Three reasons why: 1) It hardens and is ready to sand in 10 minutes 2) It's a much stronger repair as it's basically very refined Bondo. 3) It doesn't shrink. 2) In modern collision repair we seldom use wet sanding anymore since a number of completely dry sanding options are now available. Eagle Abrasives makes Tolex and Bufflex both of which work fabulously dry. I can highly recommend both products. If you've ever done much of it wet sanding sucks and wet sanding cleanup sucks even more. 2) We're going to paint the car anyway so we don't need to touch up anything so we would use basecoat and 2K acrylic urethane clearcoat as we would have these already mixed up and ready to go. If it's after the painting is complete or someone is willing to pay us to touch up the chips we normally have a little extra basecoat available (or can make it using our mixing bank) so we would put the base in the nicks and then mix up some clear to go over the base. I typically do this with an airbrush.

@mikesloper7112 2 года назад

Thank you for sharing your knowledge & experiece, your explanation has been locked into my few remaining little grey cells & hope I can do it justice.

@stevenbewick592 2 года назад

Have you tried uv stopper, similar to dolphin but cures with light in 30 - 60 seconds. Its next level imo.👍

@mikesloper7112 2 года назад

@@stevenbewick592 Hi Steve, we're about ten years behind you guys but if I can get it over here I will give it a go (just googled it UK suggests factor 50 sun screen) Dolphine I can get but Eagle abrasives dry sanding discs are International Orders from US. (10 years it will catch on here !! ) Thanks for the thought.

@satamanschmidt3428 2 года назад

@@stevenbewick592 Not yet readily available here in the US. Apparently, Evercoat is working on it but to my knowledge it hasn't been released yet. The Gunman in Australia raves about it so I would like to try some out. Living in Phoenix sunlight isn't a problem.

@apexdetail85 2 года назад

Excellent post. 👍

@jacobmarley2417 5 месяцев назад

Thank baby jesus, finally a good touch up paint video.

@markusdahmann4107 2 года назад

Dotting pens for nail art are another good tool. And so easy to clean after use! Come in various sizes to fit the depth and width of the paint blemishes.

@purityautohygienics 2 года назад

You’re amazing Brian. Seriously appreciate all of the tutorials and real world experience you provide! You have helped me immensely over the years. Thank you!

@rivakhoffman4825 2 года назад

Absolute genius ways of fixing the agonizing rock chips. I have watched other videos on this subject, but this is the best! Love the pencil erasure , micro sanding disc tool! Thanks for sharing Brian!

@stevelangsdorf7307 2 года назад

I've been having a lot of luck with flat and round toothpicks and wood skewers 🤗

@vincentkowski8466 Год назад

I have tried all the ways and what works the absolute best IMO is the Langka system using their paint for your color code vehicle. The key is to use their paint. The base coat needs no clear as it is thicker and has a nice gloss. Perfect color match too. Better than Dr.Color Chip IMO but Dr. CC is good just very hard to get a level repair. Yes it can be a big rabbit hole.

@summerforever6736 6 месяцев назад

I will try it

@summerforever6736 6 месяцев назад

What if I have some small rust in the cheap after clean it need any primer?

@henryle4829 2 года назад

I love these touch up videos. Thank you for providing different techniques and methods. Keep them coming.

@shealaking8557 2 года назад

I'm dazzled. 🤩 Thank you, Brian. Saving for springtime, to hopefully give myself a head start on touch-ups.

@r.weaver3769 Год назад

If you are familiar with scrapers in woodworking, take a phillips screwdriver and drag the razors edge against the screwdriver, curls the edge so it forms a fine scraper the put tape on each end. Also scotch tape is thinner bringing edge closer to level. Helps for better control and more productive leveling, angle the draw across paint differently for more or less of a cut.Learned this in touching up guitar finishes from Dan Erlewine.

@UzumakiX5series Год назад

The eraser and hole punch sandpaper was a good tip, keeps the sanding minimal without having to blend a much larger area than needed.

@bstewartexecutivecarcare3797 2 года назад

As many have mentioned “THANK YOU FOR SHARING THIS INFORMATION”. This is definitely one I am going to be saving for future reference. ✌️👍☮️

@verdantacres4460 2 года назад

Excellent tips and demonstration, thank you.

@iamonline3221 6 месяцев назад

What a king! What a king! Bravo! really liked it.

@tadeloach22 2 года назад

Awesome walkthrough as usual!

@GSP-76 2 года назад

Amazing workmanship! Ingenious with the eraser tip.

@joevanseeters2873 2 года назад

Excellent video Brian. Very good tutorial on rock chips.

@jimpatten7952 2 года назад

Thank you for sharing this video and the tricks Brian.

@keithp115 2 года назад

Dr. Color Chip has the easiest and most accurate system I have ever used, even on older vehicles. Highly impressed with their product. Thank you Brian with additional tips for prepping the surface!

@dougmasters3875 2 года назад

I'm fond of DR Colorchip as well, much easier to get that repair flat.

@skatena125 2 года назад

Love all the knowledge you bring yo the table without being arrogant.

@archiepezek 2 года назад

Super video Brian! I love seeing all the tricks you use to get the job done. For rock chips on my car, I just dab some factory color into the chip with a toothpick and call it a day.

@adamjohnson6701 Год назад

Great advice for stone chips and life, don’t overthink it! 👍

@larrydavisj 2 года назад

Thank you Brian! I'm learning alot from these videos. I could definitely use this knowledge on my own vehicles if nothing else.

@vincentperiolat4610 Год назад

The algorithm needs more love for Brian!! People like me NEED these tips and insight (and a little hand holding)! Many thanks and well wishes, your newest sub., Vincent 👍✌️✊

@peterjurenovskis5933 2 года назад

Awesome video and timely. My daughter’s Tuscon needs some of this love. Thanks Brian!

@neilwalker5041 2 года назад

Really cool video and I really appreciate the time you take out of your day to teach us newbs.

@MNpicker 2 года назад

Good stuff 👍 Awesome tips and tricks 👌

@markharootunian775 9 месяцев назад

And thank you for all of the product links!!

@oldrrocr Год назад

the best low cost techniques I've seen! Thanks for sharing!

@Bikemaddad Год назад

Very cool tips. Thanks buddy.

@michaelstevens6002 Год назад

great tip on mixing the clear with the paint... many thanks!

@joelkoonce8559 5 месяцев назад

I've been doing paint repair on cars for 25 years . Of course every repair is different, maybe a small cup gun or airbrush, but on rock chips, the good quality fine tip brush is the best, regulate the flow of paint with reducer ,and of course adding clearcoat to Your paint.

@kevinb7058 2 года назад

Great video Brian 👍

@30YearOldBunta Год назад

that razor blade trick is legit I'm gonna try that tomorrow

@lifeofbrian9511 2 года назад

Great video!

@markharootunian775 9 месяцев назад

I'm trying this on my old Lexus hood shortly. Thanks Brian for another GREAT video!!!☺

@lumpymash 11 месяцев назад

Absolutely superb video. Seriously good.

@smoothimagedetailing7072 2 года назад

Awesome! Thank you for all the info

@briansschneider Год назад

Thank you so much for the great instructions. Well done and appreciated!

@gjpapad 11 месяцев назад

awesome job

@marksouthard8907 Год назад

Great content and advice as always 👍

@jamesbond7648 2 года назад

This really needs a lot of patience. Thank you Brian for the Video!

@alangligor 2 года назад

Great video!!👏👏

@cesarcolli1042 2 года назад

Wow. Thanks!! I will use your links for sure

@trebor2850 Месяц назад

Great advice thanks.

@marioskosmidhs9454 2 года назад

Great video again sir, thanks for sharing

@nunyaf-nbizness 2 месяца назад

With the razor blade....I keep a couple of new blades that I have cut in half with a Dremel tool in my box. They are lifesavers on more highly contoured panels. I debur the cut and slightly round the corners as well.

@mutatedgenome 2 года назад

Great video.

@CoachKemii 4 месяца назад

Phenomenal video! Learned a lot!!! Thank you

@alanwallace3253 2 года назад

Great post, with a lot of ideas. As a rule I’m a fill the chip with a hypodermic needle guy. Seldom get a budget to really finish them down. It’s more a “ make it look better from 5 feet away and protect the metal”. It goes with an expectation talk as well. For door jam chips and panel edge chips this works very well. Middle of a panel chips, I try and get a budget of time and money to do a little more. Love the eraser trick, I have cut strips of sand paper to minimize the area sanded on occasion with so so results.

@Can8ian. Месяц назад

When I touch up, I fill the chip with color match paint, then after dry I cover with clear but cover about 5mm around the chip with clear also. Then after a day or so, I cover with clear again, but only over the chip, then let dry again for a day or two. Then I mask around the chip about 7mm and wet sand 1200 grit, then 2000, then 3000, then remove mask, cut and polish. This way I can usually get the repair to be about 95% invisible. Only do this on an area that hasn't been wet sanded before or you'll end up with a circular burn through the clear to base coat.

@mikeyp2447 2 года назад

Thank you! Great video!

@petemanschula293 2 года назад

Dr color chip is my quick go to for chips. Thanks Brian for the video’s!

@marshallborder9089 2 года назад

Great video , enjoyed it . plan on saving the video for the future .

@verdantacres4460 2 года назад

Awesome info I've saved this one thank you!

@chiroguy98 2 года назад

Very informative!

@josephtuquib6410 8 месяцев назад

great tips man... thanks!

@Lone_wolf150 2 года назад

WOW best how to guild I’ve seen!

@johnmbell4642 2 года назад

Thanks Brian that was really helpful have a good one as always🇺🇸🇺🇸🇺🇸👍

@ddautodetailing 2 года назад

Thanks for sharing!

@davestewart9146 2 года назад

Thanks Brian 👍😁

@madisbae Год назад

very good job thanks👍👍👍

@completeturnarounddetailin3536 2 года назад

great idea with the eraser and sand paper!

@johnmitchelljr Год назад

Thank you. Well done.

@bigd9848 2 года назад

Excellent video✊Another one for the video reference log.

@DetailersunitedRadio 2 года назад

Nice info

@oursulaert 2 года назад

Thanks Brian

@jeremiahgaskins7205 2 года назад

The razor trick is how I fix paint runs when I have an oh no moment spraying. Great video as always.

@apexdetail85 2 года назад

Exactly...that is where I got it from. Great way to level curtains on paint.

@mikesloper7112 2 года назад

Great visuals & explanation Brian & exactly what I need at the moment with my car (thats just been coated with ASP Metal Oxide) being set upon by ignorant & stupid octogenarian parking / pushing her shopping trolley into my passenger door.. Not amused.

@Joe-un4jk Год назад

Thank you Brian! Yet another great video. Now I am much more comfortable in starting the chip and scratch repairs on my car. Do you have any video on pulling dents from sheet metal?

@knightautopcd 2 года назад

Love the blade trick, been a painters friend when he’s accidentally gotten a sag or flow indicator in clearcoat lol

@vahag455 2 года назад

I’ll definitely try this out myself thank you. Only thing to add to make it easier to glue the hole punched pieces is to glue the pencil eraser first then easily stick the sandpaper to it. Should be less finicky.

@ladin425 Год назад

I was wondering what mixing the clear and the base does.

@dougmasters3875 2 года назад

Your timing is impeccable!!!! I picked up a used black Mini Cooper S last week, and beyond needing paint love, the previous owner(s) loved their paint pens but didn't know how to use them. And I wasn't sure how I was going to fix their sins either, then you come along with this...

@vincentperiolat4610 Год назад

I wish I found this when you did. . . Better now then not at all though!!

@RobertSmith-di5ll 2 года назад

the mans a star

@mickball6134 15 дней назад

Thanks! This is the best and simplest video I’ve found about touching up scratches and rock chips. Really well done - not only the process itself but the clear verbal tutorial. I subscribed to your channel, but haven’t yet checked to see if you might have another similar video - my bad - about touching up metallic paint? I recently bought a nice old Mercedes SLK with original Storm Red Metallic paint which really pops on a sunny day but has many scratches and rock chips. Not sure how to proceed with that one. Any advice? Thanks again.

@stanacho854 9 месяцев назад

Excellent video and will be helpful with my upcoming scratch repair. Any preference whether it's waterborne or solvent base paints?

@richardseem7948 2 года назад

Wow.awesone video and tutorial good friend. Amazing tips.whats ur take on dr color chip squeeze kit?

@dposting2941 6 месяцев назад

Yeah I wish I had just left the lil chips. I found working on nightmate bmw and audi engines way more satisfying. 2 options: live with it, or pay to get a real paint job.

@geoffW1997 Год назад

Very good video. What’s the ratio of base and clear in the mixture? I tried 1:1 but it isn’t shin enough after polishing.

@gezakoszty8349 Год назад

I like all the mediums/applications you show, because one size does not fit all.

@danieltrezub8130 Год назад

The information and tips in this video are some of the best I've seen around! Please fix your camera focus and this will be perfect

@ak-iy4yb 2 месяца назад

Excellent information! When do you do the razer scraping? You rambled quite a bit when you're talking about curing the paint so I didn't really understand when the scraping is done lol. Is it after the paint's completely dry like a couple of days as you said?

@johnpivovarnik9678 2 года назад

Just hide it with a little color so it’s not sticking out like a sore thumb.

@Haramer 2 года назад

Hi Brian @Apex Detail I was wondering for cases for rock chips on the side of the door (such as the driver door side), how do you handle this kind of touch up? I feel like the base coat + clear coat combination touch up paint will slowly "drip" or flow downwards towards the ground and not properly bond with the door? I also don't have the expertise or ability to completely remove the door to make it flat if that was going to be a suggestion. Thanks!

@tomasis7 Год назад

interesting video! I want ask what is better mixed color with clearcoat or apply individually each one? If i saw right, you used mixed paint?

@RedRod1JR 3 месяца назад

Do you have links for the products you demonstrated? Aploigize if i misses them. Thanka

@5RustyBin 7 месяцев назад

haha for the first minute and a half I thought the reflection of the strip light was the white scratch :)

@TheMorrisventus Год назад

Hello Brian. I recently got my first new car, and before I got Carpro UK 3.0 in my hands, I got 2 rock chips or door dings on my car. Didnt touch primer, but took out clear and pearl coat. Do you think you can share your wisdom on how I should approach this?

@stevemclean5787 2 года назад

Greetings Brian and Happy Holidays! I have a question about how to know if a vehicle has been ceramic coated. I am currently working on a 2017 Mini Cooper. It was purchased used and the current owner has no info about the car. I am trying to figure out definitively if it has been coated. After washing and decon, it looks great. The water doesn't bead excessively but the paint is nearly swirl free. How can I tell? Thank you! Steve

@garyvincent7537 9 месяцев назад

Nice work. I think I went down the rabbit hole in repairing my chip. First off, I didn't put enough paint on and the chip is still there. Also I used 1500 sandpaper and than switched to 3000 but obviously didn't sand enough. Next, I put the polish on and now I am left with a dull finish with chips. My question, do I just start all over again. My rabbit hole is getting deeper!

@Lone_wolf150 2 года назад

I have questions if i can please, after you wet sanded it was it with 3000 grit? And did u just use normal polish or one with a swirl / scratch remover?

@disciple777 4 месяца назад

Hi, looking to purchase the Fine Line Pen, some of them come with a second tool in the package and some do not , what is that swecond tool? (black in color)

@bjimsondetailing 2 года назад

Jimoh from nigeria.can I use a.g o to clean up the polish remain on the paint.we call it kerosene here

@joelpasserell4525 2 года назад

Thanks for your tutorials. Learning a lot. I noticed you didn't use the clear from the touch up pen...any reason you used what you did and didn't just pour some clear from the pen? I don't have a separate jar of clear so wanted to know if you thought it would be ok to combine the clear and base from the touch up pen? It's lacquer paint in my touch up pen from Honda.

@summerforever6736 6 месяцев назад

He mixed together

@MyGuyKirby 2 года назад

Great tips, especially like a way to use all those old pencils I no longer use. What do you prefer on door panels?

@apexdetail85 2 года назад

Same process and tools on the door panels.