i dont ever type to people on line but watching your videos on fixing harleys are the best explained ways of the right ways of installing parts the right way. if i could go to school to learn how to be a bike mech. it would be you i would want to teach me!!!!! thanks for your videos
I was a harley tech for 9 years. I had on the job training. All techs should have formal training at a accredited school. I made so many mistakes because I didn't have a firm foundation for repairing motorcycle. Good work. You cover the do's and don't's of repairing bike. I salute you.
Great content. Only recently gone to twin cam 88 from an Evo. Waiting for the factory service manual to turn up before doing anything outside my knowledge. Thanks for the heads up on the snap ring,every day is a school day.
We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: ru-vid.com/show-UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RU-vid Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
I new about the snap ring .. watched heaps about this job. But your the first to tell( explain) abut the right was ti fit them. And of corse a new one ... thanks. I’m sure lots have learned from you. Sometimes I think people leave out the most important parts on purpose so there is a fail. And thanks again
Glad it helped. We have a new snap ring / circlip video coming out too. We sure love hearing you subbed! Over 700 videos on here. We even made a quick video of how to best search the channel for you. Here are two links to best serve you on our channel: Channel Search: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oAeXz1nd-eQ.html All Playlists: ru-vid.complaylists Please say thanks and “high five us here: www.paypal.me/how2wrench
You rock for commenting! We will let Shane know! Kind words from another tech. You can give him a high 5 here: www.paypal.me/how2wrench Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "RU-vid Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: ru-vid.com/show-UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
On really critical places to 'count on' threadlockers---such as the bearing anti-walk out plate....a small drop of threadlocker under the head, clean and dry of course will help hold the fasteners also. While it also may protect the threaded sections of the use of the threadlocker from oils, etc. ingress. Sort of an insurance policy.
Glad it helped. We will let Shane know! You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "RU-vid Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: ru-vid.com/show-UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thank you for the kind words. I'm doing a twin cam bearing replacement series now. Head over to the new website and subscribe to the newsletter to never miss a video or newsletter! how2wrench.com/contact/ If I can ever be of service to you, here is a video explains how to connect with me. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-vjvmB01ebcs.html Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
Glad to hear that. Cool! Show us some love back? We sure could use the support! Ever bit helps keep our doors open! Join this channel to get access to perks: ru-vid.com/show-UCBhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
Thanks Peter. I don't see any under that title but he may have it recorded. Give Shane a call and ask him. @ (602) 345-0432 Have you hit that subscribe button yet? :)
Shane, Thank you for sharing the knowledge would you mind making a video on how to choose an open belt drive? Im having trouble finding one for my 2003 fxdwg also how to properly remove the motor from the frame would be a cool video
Thanks for commenting and adding value to our community! I don't have anything on the schedule coming up but can work with you one on one. Check out my website for info bud. Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ru-vid.complaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Cool. Thank you for subbing! You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "RU-vid Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: ru-vid.com/show-UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Let me try and see I can catch Shane to answer quick. He is currently at an extended stay in Japan training students this winter. We are just the social media team. Due to his limited bandwidth on time and demand for help, we had to choose to forward any requests from members first and it is only $1.99 a month to join. All member tech questions like this get directly forwarded to him every day! Be mindful and honest that this is for "quick questions" that would serve you answers that can clearly be addressed. If it's a diagnosis need you'll need to use the one-on-one service. Here is how to get in! * Join here: ru-vid.com/show-UCBhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Have you seen our "RU-vid Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
I know this is not the best place to ask but I have a question, something I have been wondering about for a wile. here it is. Has anyone ever tried to resurface a slightly scared up cam plate.
Hello, I just became a member and was hoping to find a video on how to recognise wear patterns and when to replace camshafts and lifters but could not find anything. Do you have such a video?
they did,and then they put the bearing support plate back on before pressing the cams back in.so why would you need to even remove the support plate to press cams out.
Shane , I have a 05 road king and my support plate does not have the oil hole that you point to in this video or the plug for clean out ... is there a reason for this? A little help please. Thanks Mike allen
The difference is the two style engines 88a & 88b. (B) is for balancer, which is in the softail engines and is a solid mount engine, that extra oil hole feeds the balancer chain in the crankcase. Your RK is a rubber mount engine (a) and does not have a balancer in the crankcase so that oil hole is not required. I'm sure you have this figured out by now but hopefully it'll help those in the future if need be.
EXCELLENT VIDEO! Referring to my O2 fat boy. If the cam tensioner shoes needed to be replaced, what would you recommend? Two new shoes and springs? Or the updated screaming eagle hydraulic system? Or maybe something else? Thanks.
I ran the screaming eagle set up in mine and many customers. S&S makes a great set up too. Have you Subscribed yet to never miss a video? Have you seen the video playlists ru-vid.complaylists ? Quick answers are often found here. No time to look through videos? Still have questions? You’re in luck! I provide tech help and work one on one! I know your question may seem quick but with over 300 requests a week, it’s not possible to answer them all. So, I’ve narrowed down so subscribers and donations to assist beyond the over 660 free videos. My RU-vid has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench This is great for those truly quick questions you need answered and your help back will keep me going! Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Admin How2Wrench.com
Thank you for taking the time to comment! Hit that subscribe button please! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432 Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com
Let me try and see I can catch Shane to answer quick. He is preparing for an extended stay in Japan training students this winter. We are just the social media team. Due to his limited bandwidth on time and demand for help, we had to choose to forward any requests from members first and it is only $1.99 a month to join. All member tech questions like this get directly forwarded to him every day! Be mindful and honest that this is for "quick questions" that would serve you answers that can clearly be addressed. If it's a diagnosis need you'll need to use the one-on-one service. Here is how to get in! * Join here: ru-vid.com/show-UCBhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Have you seen our "RU-vid Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Hey there awesome human (we hope so anyway 😁) I’m an intern here at The How 2 Wrench training center. I’m trying hard to learn each day and answer questions as I learn them. This one is beyond my scope yet and to not short you, it’s a great one for Shane directly. Believe me, I will be paying attention to the answer too as a fellow learner! Shane tries to devote one day a week for time to answer non-member quick questions from fans but the demand is insane 300-400 requests a week! Hang tight and maybe you get lucky he gets to circle back quick. If it’s an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one As I’m sure you can understand as a working person, life has bills and we have to work first and play later. Due to the overwhelming inbox we are focused on fulfilling Techline and fan member requests. If you need immediate help you can get his cell directly with an order. We thinks that’s an amazing relationship for both and keeps the lights on. Bruce Social Media Manger
That surely is a question for Shane. We try to respond to these questions but with 700 videos on here its hard to keep up with the demand of over 400 requests a week for “a quick answer” it's just become hard to manage in a timely manner. Good news you can catch him directly. You know him from his videos, no shortcuts on answers so he wants you to get everything you need. If looking for technical help, business collaboration call him directly @ (602) 345-0432 Are you just wanting to say thanks? Consider a donation here: www.paypal.me/how2wrench Thank you in advance for giving back! He looks forward to working with you directly! Have you hit that subscribe button yet? :)
We have videos coming on gear drive too but there are a lot of these out there and not all can afford to convert right? Thanks for commenting and adding value to our community! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ru-vid.complaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Hey thanks for the reply Shane. Yes not all can afford them. Yet many are going to them. Surprised nobody has messed up a pair they could send you. Just to give you the ability to offer a fast minute about a popular upgrade. A dead cam is worthless. Do a shout out for some busted parts. They are good learning tools. All subbed up Shane. You are the real deal man. Keep em coming.
crowmagg1 I own a Harley 2002 RK. Had gear driven cams installed to replace the stupid engineering of the cam shoe tensioner. I see they are still doing the same dumb idea on the Milwaukee 8. When I'm ready for another bike I may go with a different brand. Wise up HD.
I'm surprised you're going to reuse that chain most people polish them first before they put them back on again because that's what's causing the grooves
Hi JP...You must be new to the channel...this was a training class and we used the same engine over and over...no big MMI budgets...lol But if you watch the entire series and "general lessons" like the one on "witness marks" you would find parts inspection. This Twin Cam series is straight forward removal/disassembly...Here are a few: ru-vid.com?search_query=shane+conley+witness+marks We sure love you taking the time to comment. Are you coming to the next live session? There a few ways you could help keep this work going and stay connected with me personally. 1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know! 2. Join this channel to get access to perks: ru-vid.com/show-UCBhM8DCKnT3qXwTW0eToyCgjoin 3. Give us a high 5 here: www.paypal.me/how2wrench Keep Wrenching, Shane Conley Peoria, AZ USA Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/
He mentions service manual recommending checking and replacing worn cam chain tensioner shoes. Then why in the Hell didn't the Harley mechanics that had serviced my bike for years do that before the Mickey mouse piece of crap plastic blew apart plugging oil pump ports blowing out relief ball and losing all oil pressure at 90 mph in the middle of Nowhere Wyoming, ruining a trip with my 2 best friends on Honda Goldwings. Yes I'm pissed off!!!
I did away with the chain and their dumb little tensioners with gear driven cams. 1400.00. A terrible expense when it could have been designed that way from the factory.