Тёмный

Ultimate Epoxy River Charcuterie Board / Serving Tray 

Eigen Designs
Подписаться 25 тыс.
Просмотров 6 тыс.
50% 1

Check out this charcuterie board / serving tray I made from a walnut slab and some battleship grey epoxy. This was a really fun build that turned out better than I expected!
Instagram: eigen_desig...
TikTok: www.tiktok.com/@eigendesigns?...
Time Stamps:
0:00 Introduction
0:41 Cutting and Preparing the Walnut Slab
2:48 Building the Epoxy Mold for the Charcuterie Board
4:27 Mixing and Pouring the Epoxy
8:03 Surfacing, Sanding, and Trimming the Charcuterie Board
11:19 Attaching the Handles and Feet
13:11 Applying the Finish to the Charcuterie Board
13:57 The Finished Charcuterie Board
Equipment & Tools:
Dewalt Job Site Table Saw: amzn.to/3kyOBYU
10” Combination Saw Blade: amzn.to/3eFYGzv
Dewalt Planer: amzn.to/3itC6en
Shelix Helical Cutter Head: amzn.to/2Trtcpy
Bosch Benchtop Router Table: amzn.to/3ik9vIA
Craftsman Air Compressor Set: amzn.to/3kz3zhv
Countersink Drill Bits: amzn.to/3BuBE8G
Titebond III Wood Glue: amzn.to/3BiUyzc
Titebond Original: amzn.to/3iqjBYp
DeWalt Clamps: amzn.to/3BiC5Ti
DeWalt 20v Cordless Drill Set: amzn.to/36Oe9ck
Bessey 18” Parallel Clamps: amzn.to/3hOmdjC
Bora 40” Parallel Clamps: amzn.to/3itiGq6
DeWalt 5” Orbital Sander: amzn.to/3hNIdLt
Abranet Sanding Discs: amzn.to/3rjeOMz
Stanley 2.15” Thick Storage Container: amzn.to/2W0MfrB
Stanley 4.5” Thick Storage Container: amzn.to/3hVFcZX
13-Piece Spade Drill Bit Set: amzn.to/2UlBT5g
Kreg Pocket Hole Jig: amzn.to/3kAjUmg
Rubio Monocoat (original): amzn.to/3Bn0HKw
Rubio Monocoat (walnut): amzn.to/2UiMbDb
CNC Accessories:
Amana 8 Bit Set: amzn.to/3rUUl0R
Drag Chain: amzn.to/3lPxymf
Makita Router: amzn.to/36OKxvs
Dust Collection:
POWERTEC Downdraft Panels: amzn.to/2V055hR
Dust Right Small Port Hose Kit: amzn.to/3kBnAUK
Dust Right 4” Quick Change Set: amzn.to/3zhAueu
Powertec 4” Blast Gate: amzn.to/2VQbQDo
Powermatic 20” 2-micron Filter Canister: amzn.to/36K5Caz
Camera, Lighting & Audio Accessories:
HAITENT phone 86” Tripod Stand: amzn.to/3xV26pF
PHOPIK Softbox Lighting Kit: amzn.to/3zjz5o1
Shure SM7B Microphone: amzn.to/3s4TZ80
Go XLR Vocal Effects Processor: amzn.to/3Co4Sqc
Mic Stand: amzn.to/3yt7aBY
Cloudlifter: amzn.to/3ipFTur
Music Credits:
Cosimo Fogg - Jazzaddicts
Damtaro - Nothing
Ehrling - Typhoon
Saphheiros - Willow
Flow - Nomyn
Infraction - Training Day
Song: Baoj - Sometime (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • Baoj - Sometime (Vlog ...

Хобби

Опубликовано:

 

26 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 22   
@DudeSawdust
@DudeSawdust 3 года назад
Nicely done! That black swirl pattern is top notch. Came out great all around 👍
@Finewoodworkingofsc
@Finewoodworkingofsc 3 года назад
Another exceptional video. Thanks for sharing.
@FLPhotoCatcher
@FLPhotoCatcher 3 года назад
Good job with the serving tray, I like it! If anyone lives near central Tennessee (or doesn't mind a trip), I have rough cut, live-edge hardwood lumber for sale. I don't ship at this time. I have hard maple, spalted maple, red oak, hickory, elm, cherry, and Eastern Red Cedar, among others. Various thicknesses, mostly 5/4. Most of it has been air dried under roof for a few years.
@imRicka
@imRicka 2 года назад
I could be interested. I live in Middle TN.
@stanconklin9759
@stanconklin9759 2 года назад
Keep up the good work. Stan
@EigenDesigns
@EigenDesigns 2 года назад
Thanks Stan. I appreciate the encouragement
@navarroedwards8031
@navarroedwards8031 3 года назад
That’s a beautiful board. I made one similar but I used the black onyx , and I wondered what the battleship gray looked like. The one I made is going to be used as a cutting board. And yes make more of them.
@EigenDesigns
@EigenDesigns 3 года назад
Thank you! I hopped over to your channel looking to see the black onyx board you made, but I didn't see any videos. I was also curious how the black would have turned out. Thanks for the support!
@customgrains
@customgrains 3 года назад
LOVE IT!!! Keep up the grind! :)
@customgrains
@customgrains 3 года назад
also, only 45 more subs to get that sawstop!!
@EigenDesigns
@EigenDesigns 3 года назад
Thank @Custom Grains. I just completed a very, very interesting cutting board that I think you will like. I will probably post a sneak peek on my TikTok later today so you will probably see it before others do here on RU-vid. More to come...!
@VinceEspositoJr
@VinceEspositoJr 2 года назад
Well done. Are the handles simple cabinet/drawer handles?
@EigenDesigns
@EigenDesigns 2 года назад
Thank you! And yes, they are simple cabinet handles with a wide spread. It's simple and very sturdy, given the weight of the board.
@hcamardelle
@hcamardelle 9 месяцев назад
Just caught this...excellent job on the video and voiceover bud. Keep it up. Question for you. I've seen other makers use the same technique for finishing after they've put on the hardware. Why not finish the board prior to attaching handles and feet? Just curious. Thanks for the video. I'll be doing some of these in the next week or two.
@EigenDesigns
@EigenDesigns 9 месяцев назад
I guess there is no good reason to do it one way over another. I have done it both ways in the past and the project turns out the same no matter which way you do it.
@hcamardelle
@hcamardelle 9 месяцев назад
@@EigenDesigns no argument here. Keep up the good work!
@NWGR
@NWGR 3 года назад
One thing to get out of the way first; ripping the slab down at the table saw without a fence isn't the safest way to do it. I don't have a tracksaw either; a sawboard with some grip tape on the bottom is a cheap but very serviceable alternative to a tracksaw. I definitely see a tracksaw in my future though. That said, amazing job on the board dude! Serving trays are excellent projects for a CNC! Something you could do that I've seen is make the board as you did, then use the onefinity to carve a design (logo, monogram, phrase, geometric design, etc.), then fill the carving with a different colored epoxy. Finally, the whiteside 6210 is an excellent bit for surfacing, and not too expensive. I can't wait to get my onefinity!
@EigenDesigns
@EigenDesigns 3 года назад
The Sawboard is a good idea - I will do that next time as it sounds much safer. If I end up doing more of these I may get creative with the CNC and add some customizations to it. I am absolutely loving having the CNC in the shop... it's like having a highly skilled unpaid intern! I will look into the Whiteside 6210. It looks like its ~$30 on amazon, which is reasonable for good quality bit. I bought a cheaper variant of that bit to do the spoilboard for my CNC but it didn't last very long.
@NWGR
@NWGR 3 года назад
@@EigenDesigns In my 17 years of woodworking, whiteside bits have never let me down. They're amazing quality and priced very fairly. I'm so excited to get my onefinity! I can't wait to start tinkering with it and seeing what I can come up with. Looking forward to more of your CNC projects!
@EigenDesigns
@EigenDesigns 3 года назад
@@NWGR I ordered the whiteside bit and it just came in today. I am excited to get a chance to use it!
@NWGR
@NWGR 3 года назад
@@EigenDesigns Awesome! I have mine on order too. 👍
@EigenDesigns
@EigenDesigns 2 года назад
I just used the white side bit to surface a cutting board and it rocks!! Thanks for the great tip.
Далее
The Infinite Staircase Cutting Board
13:46
Просмотров 58 тыс.
How to Make Epoxy Cutting Boards
16:23
Просмотров 2,8 млн
Scrap Project Ideas
15:21
Просмотров 3,4 тыс.
The Coolest Desk I Have Built So Far...
10:27
Просмотров 4,4 тыс.
How To: Resin Charcuterie Board - MacArthur Woodworks
9:37
Workbench from Reclaimed Wood  |  Plans Available
17:19
Просмотров 3,3 тыс.
Epoxy Serving Tray made with TotalBoat ThickSet Epoxy
10:17
The Honeycomb Cutting Board
21:27
Просмотров 1,3 млн
Цены на технику в Tg: @iroom_market
0:17