Тёмный

ULTIMATE QUICK HITCH GUIDE For Your Tractor 3 Point Hitch!! 

Good Works Tractors
Подписаться 210 тыс.
Просмотров 84 тыс.
50% 1

Learn about many of the different three point quick hitches available for your tractor. This video will concentrate on 3 point quick hitches for category 1 tractors and include an overview of the Worksaver, Tar River, John Deere iMatch, and Land Pride Quick Hitches. We'll discuss the ASAE specifications, take measurements, weigh each quick hitch, and discuss price points and what's included. Plus, take a good look at the similarities and differences between these quick hitches.
CHECK OUT THIS SPEECO QUICK HITCH! NO BUSHINGS REQUIRED, SAVES YOU MONEY!
BUY the Speeco Quick Hitch! www.goodworkstractors.com/prod...
Buy the Worksaver Quick Hitch! www.goodworkstractors.com/prod...
BUY EXTRA BUSHINGS ON AMAZON! amzn.to/2mti7mW
Or
Buy 2 SETS AND SAVE EVEN MORE!! amzn.to/36crIj7
SHOP: www.goodworkstractors.com
SUBSCRIBE: / goodworkstractors
LIKE: / goodworkstrac. .
FOLLOW: / goodworkstra. .
You can support Good Works Tractors in a small way at no extra cost by purchasing a product in a link below. Certainly no pressure and I only recommend products that I've used and love!
Fun Tractor Products I Use & Recommend Include:
Excellent All Purpose Gloves: amzn.to/34wVVtp
Diesel Anti Gel Treatment: amzn.to/2L3WYJB
Reusable Assorted Zip Ties: amzn.to/2NocbWR
Reusable 20" Zip Ties (250 lb Tensile Strength): amzn.to/30bkYk3
Bungie Straps (Weather Resistant, 6"): amzn.to/30obAdj
2" Lasso Ratchet Strap w/ Flat Hook: amzn.to/308uEfm
2" Ratchet Strap w/ Flat Hook: amzn.to/30aM8rm
2 " Ratchet Strap w/ Wire Hook: amzn.to/2siWhG6
2" Ratchet Strap w/ Snap Hook (Includes Axle Straps): amzn.to/2R93nFo
2" Ratchet Strap w/ E-Trak: amzn.to/2sk8zOw
Strap Protector (Plastic): amzn.to/2sdNWTV
Strap Protector (Sleeve): amzn.to/37UAFyJ
Steering Wheel Knob Spinner: amzn.to/2rBlcnt or amzn.to/2rCioXc
John Deere Seat Cover Fits 1025r, 1026r, & New Style 2025r: amzn.to/2OyxBkY
Air Compressor Tire Inflator w/Pressure Gauge: amzn.to/37KIQyp
Lock n' Lube: amzn.to/2DtvlFG or XL Version amzn.to/34zRX3c
Quick Hitch Bushings: amzn.to/33v7Ma2 or amzn.to/2OuvrD9
Lynch Pins or Cotter Pins: amzn.to/33sSaDL or amzn.to/2r0jJXZ
Shackle: Great Tie Down Point! amzn.to/2Oupoyq
Lubricants: amzn.to/33wzgvR and amzn.to/2DuYbW8 and amzn.to/2qWEEv0 and amzn.to/33syPTn
Tractor Side View Mirror: amzn.to/34wXCaf
LED Replacement Bulbs For Head Lights, Cab Lights, Fender Lights For 3r & 4r Series: amzn.to/2D6fRqD
LED Replacement Bulbs For Head Lights For 1025r, new style 2025r, new style 2032r, 2038r: amzn.to/2qy0pRM
LED Replacement Bulbs For Fender Lights For 1025r, new style 2025r, new style 2032r, 2038r: amzn.to/2D6fRqD
Screw-in Tire Studs: More information coming soon!
ROPS Mounted Gun Rack: amzn.to/33z2ZEe
ROPS Mounted Tool Tray: amzn.to/2R9BwX8
Heated Seat Pad: amzn.to/2OVoREz
Amazon Basics Micro Fiber Cleaning Cloths: amzn.to/2O261gk
Torq X Dual Action Random Orbital Polisher : amzn.to/32Jf3Tp
Generic Magic Erasers: amzn.to/34FTKUC
Meguiar's 105 Ultra Cut Compound: amzn.to/2NiCCir
Meguiar's 205 Ultra Finishing Polish: amzn.to/2O31qdH
Car Guys Super Cleaner: amzn.to/2Lz1dxg
Car Guys Liquid Wax: amzn.to/305X4ZC
Car Guys Wheel Cleaner: amzn.to/3014Uov
Car Guys Tire Shine Spray: amzn.to/2Oal1Zo
Car Guys Plastic Restorer: amzn.to/300vuNI
500 Lb. Storage Cart w/ Casters: amzn.to/2O5wdqm
Benchmade Griptillian Folding Knife: amzn.to/2KTwBFW
Leatherman Wave Multi Tool: amzn.to/33wrC4D
Good Works Tractors is part of the Amazon & eBay Affiliate programs and I will receive a commission if you choose to purchase through these links. Thanks for your support!

Опубликовано:

 

21 янв 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 94   
@GoodWorksTractors
@GoodWorksTractors 4 года назад
CHECK OUT THIS SPEECO QUICK HITCH! NO BUSHINGS REQUIRED, SAVES YOU MONEY! BUY the Speeco Quick Hitch! www.goodworkstractors.com/product/category-1-e-hitch-quick-hitch-no-bushings-required/ Buy the Worksaver Quick Hitch! www.goodworkstractors.com/product/worksaver-quick-hitch-a-john-deere-imatch-alternative/
@kierangilmartin1379
@kierangilmartin1379 4 года назад
Good Works ?LzTractors
@70Superbird
@70Superbird 3 года назад
What is your opinion of the Speeco Quick hitch? I like the idea of not needing bushings? I have a 2011 JD 4320 and am interested in getting a Quick hitch. What do you recommend? Keep up the great videos!
@70Superbird
@70Superbird 3 года назад
Are they still on back order? Thanks again!
@cody481
@cody481 2 года назад
Once you use an A frame quick hitch ALL others become obsolete. Seriously how could any engineer/farmer not immediately realize how easily a triangle fits inside a triangle that has the bottom missing? And 1 pin on the top holds everything together to produce down pressure. And if you buy the part that fits on the tractor any school AG shop can easily make the parts for each implement. Let's support our local FFA. IF you still have one.
@cody481
@cody481 2 года назад
I found a old link. Please note this is not a new idea, 50+ years ago in Russia. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KwdDARKdPTk.html
@lilredcummins
@lilredcummins 4 года назад
Added a quick hitch on my 1026R some years ago. FYI, I lost some lifting capacity because the quick hitch offsets the lift point out about 3" farther from the tractor. To compensate for this, I cut and removed as much as possible (slightly more than 3") from the straight section between where the quick hitch and the lift arm attaches, on the lower lift arms, and re-welded them. Can't imagine being without the quick hitch system.
@aerospot2
@aerospot2 2 года назад
Have been using HF for a few years now. Based on your video, Mine is built better than most. Retired on a budget, this unit fits the ticket. All of the 4 rear attachments are easy peasy on and off! Love our Quick Hitch!
@bryantmixon4157
@bryantmixon4157 4 года назад
Excellent video!
@josephsierra7295
@josephsierra7295 4 года назад
I got the harbor freight (tar river) one a few years ago. So far, it's turned out to be a good value for my needs. Thanks for the video! Good stuff!
@GoodWorksTractors
@GoodWorksTractors 4 года назад
Thanks for watching!
@user-sn8bq6kr1t
@user-sn8bq6kr1t 5 месяцев назад
Excellant review.
@jc-botaman1077
@jc-botaman1077 4 года назад
Love my quick hitch, makes hook up sooooo much easier. Adding a hydraulic top link makes it even easier. Had to modify some of my older implements, but once done I was good to go. Good video.
@GoodWorksTractors
@GoodWorksTractors 4 года назад
Thanks for watching!
@darrengarlough5121
@darrengarlough5121 4 года назад
Good job doing this video. I went with John Deere because mainly of color, but did notice that the weld and paint job seemed superior.
@GoodWorksTractors
@GoodWorksTractors 4 года назад
Thanks for watching!
@belindakt
@belindakt 4 года назад
Great video, very informative. I consider these a must have, i sure don't miss rocking the tractor, or prying on that plow with a 6 foot pry bar to get hooked up.
@GoodWorksTractors
@GoodWorksTractors 4 года назад
I agree Belinda. I'll never be without one 😁
@michaelhaas4757
@michaelhaas4757 3 года назад
Thanks great information
@janethouck9763
@janethouck9763 4 года назад
Always good info thanks
@GoodWorksTractors
@GoodWorksTractors 4 года назад
Thanks!
@LeaMacDonald
@LeaMacDonald 4 года назад
Informative and fair. :)
@GoodWorksTractors
@GoodWorksTractors 4 года назад
Thank you sir!
@stevek4449
@stevek4449 4 года назад
Nice video, can you compare “Pats Easy Change” hooks to a quick hitch? Thx
@andrewcriswell6865
@andrewcriswell6865 4 года назад
I've got the harbor freight quick hitch (2 actually). I've modified them with a 5/16 grab hook on one of the rear braces, a 4" diameter pvc pipe mounted on the side (to hold my chain), and a shackle on the other rear brace. I can now easily carry my chain, and have more points to connect rope, straps, and the chain to when needing drag or pull things.
@GoodWorksTractors
@GoodWorksTractors 4 года назад
Nice!
@benjaminstockton3917
@benjaminstockton3917 4 года назад
Thanks for the video i appreciate them
@GoodWorksTractors
@GoodWorksTractors 4 года назад
Thank you sir!
@jerseyjim9092
@jerseyjim9092 3 года назад
Great information. I like the features of the worksaver and especially the fact that its made in the USA. But struggling to justify the much higher cost. I had the same struggle with my purchase of pallet forks and in that case chose a product that was at least half the cost of jd and they have served me well for 4 years. I dont mind paying a premium for an American product but some companies don't even try to be competitive.
@randallmoreland728
@randallmoreland728 2 года назад
Its not about being cost competitive. Its about a higher quality standard of product and paying a living wage to someone who pays for their family. Not a communist country who pays a fraction to the worker.
@seenithere
@seenithere 4 года назад
The class 1 quick attach require those adapters in most cases, cause they make the bottom attach locations class 2 size :-( I found a piece of pipe with the correct ID & OD, drilled attach holes & Bobs your uncle, saved $50 a set on the adapters. You could also get class 2 pins & possible change them on your equip to if they are removable.
@DavidSmith-gi5yv
@DavidSmith-gi5yv 3 года назад
Corey, a quick and easy way to get an exact center to center measurement when dealing with two identical thicknesses of material such as your quick hitch side frames or two before wall studs etc is to measure from the inside of one to the outside of the other that gives you an exact center to center measurement.
@GoodWorksTractors
@GoodWorksTractors 3 года назад
I agree, however by showing the center to center, it eliminates folks thinking I'm measuring incorrectly. It's amazing the things that start to go through your mind once you start making RU-vid videos. Much of my focus goes into what will provide the least amount of critique from viewers. Haha! Thanks for watching!
@travis8404
@travis8404 2 года назад
I have a JD X758 with a front quick hitch, do you Know if they make a front attachment with a ball hitch receiver?
@kevlarshanahan1087
@kevlarshanahan1087 3 года назад
Can the factory Kubota BX backhoe attach to a Quick hitch or do you need to remove the QH to put the BH back on?
@BillRodgers2
@BillRodgers2 2 года назад
Question : I bought a used quick hitch that don’t fit my needs mainly because I did not ask the right questions so my question is . Is their one quick hitch that will work on both class 1 and 2 implements ?
@airhead8188
@airhead8188 4 года назад
Great video. How much longer of a reach does the PTO shaft need to have once the quick hitch is installed?
@GoodWorksTractors
@GoodWorksTractors 4 года назад
Roughly 3-4" longer. Shouldn't be an issue for most PTO shafts as there's quite a bit of overlap.
@angler6960
@angler6960 3 года назад
Why do some implements say they are NOT compatible with imatch?
@BrianBoruish
@BrianBoruish 2 года назад
Can anyone tell me the difference between a Cat 2 and Cat 3 quick hitch? I can't seem to find any decent info online. Can a Cat 2 quick hitch fit on a JD 3232e?
@taylormohnen3092
@taylormohnen3092 3 года назад
What would I need for a 4020 JD?? Hooking up to a brush hog.
@FromSteelToWood
@FromSteelToWood 4 года назад
Thanks for this informative video! I still don't understand why the cat 1 quick hitch is meant to hook with 1 1/8" cat 2 pins... Both cat 1 and cat 2 implements have different dimensions that do not allow for any interchangeability. Thanks!
@GoodWorksTractors
@GoodWorksTractors 4 года назад
Honestly, I don't understand it either. Hopefully I can find the reasonsing behind it someday.
@tomoaktree4951
@tomoaktree4951 4 года назад
Good Video. It's too bad that Cat-1 implements can't adhere to the Cat-1 standard. Past experience has shown that Cat-2, Cat-3N, Cat-3, and Cat-4 implements actually are pretty much standardized. There are a number of Cat-3, and Cat-4 implements that can ONLY be used with a quick hitch as the pins on the implement are not removable.
@MrRonluker
@MrRonluker 3 года назад
Great job! Thanks for the info. Which hitch to you recommend? lol
@GoodWorksTractors
@GoodWorksTractors 3 года назад
Speeco has been a big hit in recent months!
@tom73055
@tom73055 4 года назад
Why my hitch didn’t work. I measured the width of the lifting arms on the tractors lower arms and the ball size was to wide to fit into the quick hitch bottom opening on the frame So now i cant use the quick hitch .do you have any videos showing complete connection on a TC55DA tractor? THANKS FOR THE VIDEO
@GoodWorksTractors
@GoodWorksTractors 4 года назад
Do you have a category 2 hitch and cat 2 three point or cat 1 hitch and cat 1 three point?
@RustyCarnahan
@RustyCarnahan 4 года назад
I have a tractor that kind of falls between the territory of Category 1 and Category 2 implements. Would I have to buy two quick hitches, or is there a variant that allows use of both? Possibly a hack for a category 2 hitch so I can use category 1 implements on it?
@GoodWorksTractors
@GoodWorksTractors 4 года назад
Not sure, I wasn't aware of tractors that were both classes?
@RustyCarnahan
@RustyCarnahan 4 года назад
@@GoodWorksTractors quite a few, actually. The one in question here is a John Deere 620 Two Cylinder
@davidbrower331
@davidbrower331 4 года назад
Does anyone make Category 1 Quick hitch that does not require bushing for implements? didn't someone but they discontinued it? great info, thank's for the video
@GoodWorksTractors
@GoodWorksTractors 4 года назад
Worksaver used to, but discontinued.
@musicilike1723
@musicilike1723 4 года назад
Just picked up an 1952 8N tractor. Would this work? Inside spacing between lower pins is around 27 inches. (Does this classify my 3pt hitch as a class 3?)
@GoodWorksTractors
@GoodWorksTractors 4 года назад
I'm not sure if it would work. Look up the specs on the 8n
@willhurd8415
@willhurd8415 4 года назад
I have a Kubota B2710 what would be the size of work saver quick hitch should I get and how can I buy it?
@GoodWorksTractors
@GoodWorksTractors 4 года назад
Hi, the category 1 Worksaver is perfect
@jameshussey7265
@jameshussey7265 4 года назад
Does any of the quick hitch come with a receiver hitch? I think some one needs to add that to it. That would make those a lot more versatile!
@GoodWorksTractors
@GoodWorksTractors 4 года назад
No, I don't sell any that offer that feature.
@endutubecensorship
@endutubecensorship 4 года назад
I think they leave a hitch receiver for clearance of PTO shafts, John Deere imatch has an option of a "quick hitch/imatch(with bushings)" compatible hitch receiver bracket www.greenpartstore.com/Heavy-Duty-3-Point-Receiver-Hitch-LP25001.html
@bobpease6924
@bobpease6924 3 года назад
Just installed this quick hitch on my JD 1023e. Attached my GM1048e finish mower, someone told me I need a new--longer PTO shaft, is that true?
@GoodWorksTractors
@GoodWorksTractors 3 года назад
Did you try connecting the shaft yet?
@jaronpope5681
@jaronpope5681 3 года назад
Which hitch do you recommend for an old jd 4020?
@GoodWorksTractors
@GoodWorksTractors 3 года назад
is it cat 1 or cat 2?
@jaronpope7909
@jaronpope7909 3 года назад
@@GoodWorksTractors I pulled out the manual and it states that it is set up as a Cat 2 with 1 1/8" hitch pins and 1" holes in top of mast. Most (if not all) of what I am doing does not use Cat 2 implements. So same question as before...which hitch would you recommend ? Thanks
@cg1547
@cg1547 4 года назад
of subject...I know you just bought the clock....you interested in parting with it?
@GoodWorksTractors
@GoodWorksTractors 4 года назад
Haha no thank you.
@CD-mc8gv
@CD-mc8gv 2 года назад
Has anyone used the Speeco one on a JD2520? Also will the Speeco work on the JD2520?
@GoodWorksTractors
@GoodWorksTractors 2 года назад
It’ll work just fine
@georgesimpson3113
@georgesimpson3113 4 года назад
call me crazy but I think you used the adjustable top link backwards... at least how I use it. The HF hitch works fine.
@GoodWorksTractors
@GoodWorksTractors 4 года назад
I suppose it could be used the other way, but seems more stable this way. Thanks for watching!
@livinlifeat3mph334
@livinlifeat3mph334 4 года назад
How much for the round john deere neon light you have above the toolbox? Thanks.
@GoodWorksTractors
@GoodWorksTractors 4 года назад
I think it was $270
@markschmaus5580
@markschmaus5580 4 года назад
1 BAM!
@GoodWorksTractors
@GoodWorksTractors 4 года назад
🏆🎉🎆👏
@chris3m98
@chris3m98 4 года назад
Sir, Worksaver shows someone in Carson,Mi. as a dealer, why not you????
@GoodWorksTractors
@GoodWorksTractors 4 года назад
They are the distributor for Michigan and cannot sell to the public.
@91rss
@91rss 4 года назад
you can add two strips of 1/8" x 1" flat bar rolled and stacked on one another, and install them (tack) in the lugs, to make them a Cat 1 vs using bushings. followed this guys post .www.tractorbynet.com/forums/attachments/425331-converting-cat-2-quick-hitch.html#post5732370 or use this www.speedymetals.com/pc-3447-8242-1-18-od-x-120-wall-dom-steel-tube.aspx and split pieces in 2 shells
@chrisparenti2461
@chrisparenti2461 4 года назад
You know how to hook a guy up😂
@SummertymeJamz
@SummertymeJamz 4 года назад
Checking in for 2nd place
@GoodWorksTractors
@GoodWorksTractors 4 года назад
Not a snow flake in sight where I'm at...just a warm ocean breeze 😎🌴🏖🌊
@SummertymeJamz
@SummertymeJamz 4 года назад
@@GoodWorksTractors boo!!! Enjoy your time away.
@markschmaus5580
@markschmaus5580 4 года назад
@@GoodWorksTractors sooo not fair
@markschmaus5580
@markschmaus5580 4 года назад
Hows it going my East Coast Bud ??
@SummertymeJamz
@SummertymeJamz 4 года назад
@@markschmaus5580 still some snow here and there. Nothing white in the forecast in the near term, which is good. Giving a bit of time to get rid of this silly cold.
@lisapetmecky7345
@lisapetmecky7345 3 года назад
4 out of 4 of my implements don't work with quick hitch. Only the new stuff works.
@GoodWorksTractors
@GoodWorksTractors 3 года назад
Correct, stuff from the 50's, 60's, 70's, 80's, 90's most likely won't work. Quick hitches have been around for about 20 years, so more and more attachments are quick hitch compatible with probably 95% of attachments now made being compatible.
@jeffstabler5845
@jeffstabler5845 3 года назад
Pretty hard to find a WorkSaver Dealer....have to call a distributor first. WorkSaver doesn't even have a list of dealers.
@GoodWorksTractors
@GoodWorksTractors 3 года назад
I'm a Worksaver dealer, why didn't you just contact me?
@jeffstabler5845
@jeffstabler5845 3 года назад
@@GoodWorksTractors I figured that the shipping cost for such a heavy item would far outweigh the cost of trying to find one locally.way more than trying to
@GoodWorksTractors
@GoodWorksTractors 3 года назад
Maybe, I ship 20-30 quick hitches a week so I guess many don't find it unreasonable. Best of luck!
@jeffstabler5845
@jeffstabler5845 3 года назад
THANK YOU for such informative videos...you sure don't find this info from your JD dealer...GREAT JOB.
Далее
Беда приходит внезапно 😂
00:25
Просмотров 891 тыс.
Who Can Break Most Walls? Ep.2 | Brawl Stars
00:26
Просмотров 375 тыс.
#62 - 3 Point Hitch Receiver - Heavy Hitch vs Amazon
12:21
Беда приходит внезапно 😂
00:25
Просмотров 891 тыс.