Understanding Your Speaker's Frequency Response Chart | ADAM Audio

Подписаться 60 тыс.

Просмотров 38 тыс.

50% 1

Understanding Frequency Response Charts | ADAM Audio
In this video, ADAM Audio Product Manager, Stephan Mauer, deep-dives into how to understand frequency charts, and how they are used to judge the performance of a studio monitor. All of ADAM Audio's studio monitors extend past the typical range of human hearing at 20 kHz... all the way up to 50 kHz, limiting THD and ear fatigue so you can work longer hours.
The ADAM Audio T Series: www.adam-audio...
The ADAM Audio AX Series: www.adam-audio...
The ADAM Audio S Series: www.adam-audio...
ADAM Audio was founded in March 1999 in Berlin. Since then the company has been developing, manufacturing and distributing loudspeakers in the field of Professional Audio.
The development of the X-ART (eXtended Accelerating Ribbon Technology) tweeter based on the 1960’s invention of the Air Motion Transformer by Oskar Heil was largely responsible for the company’s founding. Producing sound not with a piston-like diaphragm as is done in most of the loudspeakers that are on the market, but using a pleated diaphragm that is capable of moving the air 4 times faster than the folds themselves are moving was the appealing idea behind it all. The achieved results were intriguing and gave ample reason for moving forward.
#adamaudio #studiomonitors #adamaudiomonitors

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@ADAMAudioBerlin 4 года назад

What monitors are you using? Leave them in the comments below 👇

@asmoth360 4 года назад

Logitech Z4 lmao

@ADAMAudioBerlin 4 года назад

@@asmoth360 You gotta start somewhere!

@Wilfrago-audiotips 4 года назад

Adam Audio T7V

@Jonathansausm1 4 года назад

Adam P11A in the production Studio and A7x in the mixing Studio 💪🏿

@ADAMAudioBerlin 4 года назад

@@Wilfrago-audiotips Nice! Hope you're enjoying them.

@DarkPa1adin 4 года назад

Good to add frequency measured by your speakers and explain about Adam's decision making to have this curve or that curve.

@richardszyniszewski2791 2 года назад

Thank you for this very clear presentation👍🏻👍🏻👍🏻

@thejuankurtis 4 года назад

This was very informative. I'd like a frequency video comparison between one monitor from each series of monitors.

@electricbrain1736 4 года назад

In modeling box for sound reinforcement systems... What really account for loudness and flat responds? 1.Quality of raw woofer? Or 2.Perfectness of box modelled Or 3. Both.. competition is coming up.

@MichaelM-dp7is 3 года назад

Hi, I have never understood what my speaker crossover should be set at which is what brought me to this video hoping to find what I should set my crossover at. I understand that different channels have different frequencies but I don't know how to pull my crossover from that. Currently, I have a collection of different brands of speakers. I use Definitive Technology BP-8040ST Bipolar Tower as my fronts, Definitive Technology CS-8040HD at center, Fluance Elite High Definition 2-Way Bipolar Surround Speakers with 2 old Onkyo bookshelf speakers as high fronts connected to a Sony STRDN1040. Yes I know it's pretty old but that's what I have to work with at the moment. how do I find the crossover? I tried the auto-calibrate but it just doesn't sound that good

@sadow51 Год назад

I have a dumb question. What is the best speaker if I want to create the highest amplitude of 528hz frequency music? I am having trouble figuring this out. Thanks

@ADAMAudioBerlin Год назад

Hi there! Here the room (and possible modes) also have a big impact. The most accurate answer to the question in terms of headroom would probably be the S6X www.adam-audio.com/en/main-monitor/s6x/

@lycoris7890 2 года назад

I know that for speakers, the target has been established, which is a speaker should ideally have a flat frequency response in an anechoic chamber. My question is: Who said that/discovred that What's the title of the research paper

@Rene_Christensen Год назад

Probably Harman research a la Sean Olive and Loyd Toole.

@byniasofficial2567 3 года назад

In a parallel Universe: "Hello and welcome to another episode of How to Stephan Mauer. My name is Adam Audio..."

@emiel333 3 года назад

Haha, good one!

@PlatinumMastering 3 года назад

you forgot to mention LINEAR PHASE lol the SUBWOOFER PORT IS OUT OF PHASE this is Un-educated video you guys keep posting

@patrick7799 3 года назад

Stephan Mauser you and everyone does not understand frequency response cuz what you and everyone does is very wrong making the top part of the frequency flat that is wrong cuz bass is naturally bigger then the other sound waves so when you set the top of the bass sound to match the top of the mid and treble frequencies the bass frequencies loudness will be a lot lower then the other frequencies that is not flat frequency response.

@JohnSmith-qi6co 2 месяца назад

Good stuff. I'm pretty sure with just a little effort even a beginner can figure some of it by reading the axes labels. What almost no streamers include in their presentations are details about smoothing. It was mentioned quickly here, but it is extremely important. Almost any defect can be concealed with smoothing. Every graph should have an indication of the smoothing so we can be sure our comparisons are valid.

@ADAMAudioBerlin 2 месяца назад

Hi @JohnSmith-qi6co! Thanks for your comment, we'll try to cover that in more detail in a future video. Have a great day!

@puchu47 3 года назад

Is higgher is better?? I need a iem earphone and I have SPL charts what to see in that 🙏

@rockymini625 6 месяцев назад

Interesting a bit over my head really how does a person measure the crossover point of a speaker with no data?

@ADAMAudioBerlin 6 месяцев назад

Hi @rockymini625! You can find all data on our products´ web page. In case you want to know more, we advise you to reach out to our support team The Support Team will gladly answer all your questions. You can send your question through the official form on this page: support.adam-audio.com/hc/en-gb/requests/new

@ashneel 3 года назад

ps: the t8v measures great

@SamJPerez 4 года назад

Thanks for these ADAM Audio. You put these out for free and they're so useful. Trust it will be effective -- I use another brand for budget reasons but you will be top of mind for me and many others when we think of upgrading.

@ADAMAudioBerlin 4 года назад

Thanks a lot for this great feedback! That motivates us to produce more of these in the future.

@aircombatmaneuvers 3 года назад

Having speakers beyond and below human hearing capabilities (average person cannot hear above 15hz and most of the isntruments plays in the range of 1000 to 4000hz) reaching 50000 hz is very important for bats and dogs audiophiles.

@AndreRuschkowski 3 года назад

Hi guys! It's funny that you explain the importance of a frequency chart to the public here but it looks like you're hiding the chart for your most popular model A7X from the public! At least I was not able to find it. And I looked really hard!

@raphaelkasongo8377 Год назад

Hi, where do I find a frequency response graph of a speaker?

@ADAMAudioBerlin Год назад

Hi Raphael! You can find the graphs in our website. You can find it for each product´s page in the Measurement Report section. For instance this is the A7V´s www.adam-audio.com/content/uploads/2023/01/adam-audio-a-series-a7v-studio-monitor-measurement-report-v2-english.pdf And here´s the product´´s page www.adam-audio.com/en/a-series/a7v/

@raphaelkasongo8377 Год назад

@@ADAMAudioBerlin thank you

@orbea1951 4 года назад

I just bought a pair of A7Xs and paired it with two SVS stereo subwoofers. But I cannot find the frequency response chart of A7X. It would be good to attach the frequency graphs to this video. Your videos about positioning, burn in etc are actually very useful. Thank you

@azzinny 4 года назад

Are AX series currently the worst in off-axis frequency response? They do not have the wave guide for the tweeters as in the newer Adam models.

@electricbrain1736 4 года назад

I'd you test for flat responds after speaker in already inside I finished box.... Do would you correct the fr if it's too imperfect.

@A55563 3 года назад

I adore human intelligence that does no harm. Nice presentation, a brief portion of which answered my question. Thank you.

@DarkPa1adin 4 года назад

I like this series!

@ADAMAudioBerlin 4 года назад

Well, thank you so much!

@suharasp 4 года назад

Super video series by Adam audio and as a consumer of Adam products I'm very proud. Btw I'd like to know whether we can get the frequency curves of Adam speakers just to look and have an idea since everyone haven't got the privilege to hear all of the models in person. If we have the curves, we can see the graph of a particular model and order them online if we like and know the sound produces according to the that particular curve.

@emiel333 3 года назад

Hello Stephan. I’m a proud owner of a pair Adam Audio T7V. These monitors are really amazing. They easily outperform other studio monitors that cost twice as much. Question: The T7V have a max SPL of 110 dB. When I use an SPL meter, the instantaneous measurement only reads around 100 dB C weighted at max volume. How can I reach the max SPL output? I hope you can help me out. Kind regards, Emiel333.

@spyplane3979 2 года назад

i think its subjective to what its rolloff point is what range ur testing

@ThemisGeorgoudis 4 года назад

like before watching :D

@KaranSharmapersonal 3 года назад

I am really interested in knowing which frequencies do's what. Example 9khz is responsible for pinna and other like so, i am not able to find anything throughout the internet relative to this topic, if you can explain it it will be very helpful. 👍

@ADAMAudioBerlin 3 года назад

Hi Karan, do you mean something like this? i.pinimg.com/originals/8b/4a/6f/8b4a6fd7b8d65711eed41850a194284e.jpg

@ChrisKluepfel 2 года назад

So cool to learn about sound and alike. Coming from a visual background this is great to dip in my toes in a completely different subject. Well done!

@ADAMAudioBerlin 2 года назад

Thank you, Chris! We are very happy to hear that you learn something from our video! 😊

@ndujamz 4 года назад

Tannoy Reveal 502

@miltonex 4 года назад

Very interesting info, cheers

@jaydekaytv 4 года назад

Great job - thanks for the vid!

@ADAMAudioBerlin 4 года назад

You're welcome, glad you enjoyed it! Cheers

@sebastiann9279 4 года назад

I've been thinking of buying studio monitors for many months, going back and forth of different monitors, for both hifi entertainment use and for music work as I would like to replace my Klipsch rp280f and rf52II speakers and my bulky av receiver to save A lot of useful space. s3v seems to tick lot of boxes for me not super expensive and nice design not too small or too huge. How well does s3v compare to RP280f in power and sound quality?

@ADAMAudioBerlin 4 года назад

Not 100% sure as I haven't heard that exact model... The S3V is a great monitor and has tuning technology built in so you can adjust it for what sounds best in your room. Like you said, it's active as well (with studio-quality amplifiers) which helps cut down on space. It's also a true three way, which helps reproduce that midrange quality a bit better than 2 or 2-and-a-half way speakers. Hope that helps!

@WouterStudioHD 4 года назад

Go for S3V or, even better, S3H. You will never question your speakers again.

@ADAMAudioBerlin 4 года назад

@@WouterStudioHD Glad you love the S Series so much! Thanks for the kind words.

@FlyingEyes27 4 года назад

Ich hole mir die A7X erstmal zum testen, habe aber in vergleichen oft gelesen und gehört, das im gegensatz zu den Yamaha HS7 die Mitten bei Adam sehr untergehen im vergleich. gibt es eine Möglichkeit bei den A7X, die Mitten mehr an zu heben? Oder eine Software die das für den Computer einstellt?

@ADAMAudioBerlin 4 года назад

Hey, die A7X haben mehrere Möglichkeiten der Frequenzanpassung auf der Rückseite des Speakers. Falls das und vor allem auch eine gute Raumbehandlung bzw. Aufstellung der Speaker dir nicht reicht, ist es mittels Software auch möglich, das zusätzlich anzupassen (z. B. Sonarworks).

@FlyingEyes27 4 года назад

@@ADAMAudioBerlin ich habe sie mir jetzt gekauft und den EQ meiner Soundkarte benutzt. Habe mir mehrere Profile erstellt. Man hört jetzt jedes Detail in jeder Frequenz und man hört sofort jedes störgeräusch raus was mich vor Fehlern in der tonbearbeitung warnt aber leider auch stört bei Leuten die den Ton schlecht bearbeitet haben 🤣

@ADAMAudioBerlin 4 года назад

Das freut uns sehr und cool, dass du für's EQing auch noch eine weitere Lösung gefunden hast! Und was die "schlechten" Mixes der anderen angeht: Sieh es als Lernerfahrung 😆 😋

@ladjkaoz 8 месяцев назад

nice but.. any pro knows this...im.not even a engineer and can read these graphs...and understand... them how about polar respond thats were I get lost. 🫶