Upgrade Your Duet Board to RepRap V3 - How To - Chris's Basement 

Chris thanks for the help. You're helping me get through my internship that I'm way too underqualified for.

Thank you once again Chris! I'm about to perform the 'dreaded upgrade' LOL I'm going to use the configurator, but having you walk us though it is great. Good job! Thanks!

Another great RRF Chris! You seem to be the only big 3D printer guy that deep dives these! please keep it up! I learn something new every time! 👍

Thanks a lot for putting this video together, it saved me to read through endless wiki pages. One thing worth mentioning is that there is a line one has to add when using a Panel Due that wasn't necessary before... M575 P1 B57600 S1 being 57600 the baud rate of the Panel Due

Well done Chris, again another useful video. I would ask you for more videos related to duet2wifi.

Thanks for this video! Gave me the confidence to give it a go on my Duet2 Wifi delta printer yesterday. I used the RRF configurator, referencing the values out of my RRF 2 config, and the only thing I had to add afterward was my old scaling fix for it to work exactly as before. I set up the config beforehand, and when I actually pulled the trigger and started uploading files, the whole process only took about 10 minutes! Getting fresh PID tunes to complete the process took WAY longer than the firmware updates.

Thanks, I'll have to do this sometime soon and your video is a huge help.

Excellent video, thanks. Ive been holding off Doing this upgrade, not anymore thanks to you.

You Rock! thanks for all the dope videos

Chris. Thanks for the great video. I love just watching you go through it even though I don't have a duet. So, big request here. Can you do a top five boards head to head. Compare price point, features, adaptability, interface features, etc, etc... all the things you love and don't love in a board.

Thanks for this, you are a life saver.

Thanks! It was a real pain to upgrade several months ago...

Thank you

Getting a config from the web config generator to compare your config against can also be very helpful to see how things have changed.

Cool, I will attempt an update for my Formbot Troodon, I suspect there will be som issues :) Good stuff Chris! (y)

hey bro love your videos they have been the light in the darkness for me. im fairly new to 3d printing and decided to do a mainboard overhaul on my i3 mega s, the old board took a dumb and i swapped it for a BTT SKR 3 STM32H74. So, ive got everything running pretty smoothly bl touch sensor less homing with BTT TMC2209s. super excited about this build. however there have been a few hiccups, 1) i cant seem to get the bed parameters perfect prints start just a bit off center. 2) my bl touch works great for homing and the baby stepping works great but for some reason i cant see my height map and it sometimes acts as if Z is not compensating for deviants in the bed height. (ive read this could be due to my Wi-Fi firmware version (1.26) not being compatible with my rep rap firmware version(3.41)) AND 3) Sensorless homing works great for homing, however it doesn't seem like it recognizes stalls when i pause a print, when the print head moves out of the way it tries to move too far on the Y axis into the negative or maybe its just looking for 0, regardless the stepper makes a loud noise when hitting the endstop and when i resume it is way off position which i believe is from missed steps when stall detect isn't working properly. Also anytime im printing anything duet notifies me of stalls almost constantly every few seconds i have it configured to "take no action when stall is detected" while running a print so it doesent effect the print but im wondering if this is normal. ANY HELP OR FEEDBACK IS GREATLY APPRECIATED!!! I've reached out to BTT with no response so thankyou for all the work and time you put into these videos!

Great video, thanks. One thing I noticed in your video is the define position of lead screws function. When I originally created firmware for my machine (CoreXY, dual Z) I had to create a fake U axis for the second Z axis. So I assume I can now use that command and just specify the location of each Z lead screw?

thank you i dont know if i will update mine yet from 2.05.1 to 3.1 i home at zmax and only probe the bed for a new mesh when i change something i have no idea how to set that up

@Chris so I have been thinking about upgrading to 3.x for my RC. Question is if have issues is it easy to roll back to 2.x firmware?

Thanks Chris, yet an useful video. will you make more videos related to duet 2 wifi maybe how to config a bltouch

Can you start with a duet 2 wifi,erase firmware,and download 3.3.0 onto an sd card and flash the board(virgin board no printer yet,printer to be built) straight off github? Does it need API on the sd.? Thank you

I decided that it was time to update my Duet and I seem to be on the same firmware and everything as you were in this video - just two years later. But when I upload and launch the 3.0, I get this error: error: M997: In-application programming binary "iap4e.bin" not found. Not sure what to do after that, you didn't get any errors.

Can you make a video on the upgrade for users that are running the Duet WIFI board on a Ender 3?

Hi Chris I'm all new to duet wifi, if I go to 3.x.x and make a new config file, do I have to change alle the things after using config tool that you make in this video ?

I've been dreading/putting off updating my duet 2 and duet 3 firmware... I have a RailCore with Duet2/Duex5 and a Daedalus with Duet 3 and rpi. The Daedalus has been a black box for me on what's what. But, I understand what's going on with the Railcore. They both work ok without the updated firmware versions and I have a bad feeling that if I start messing with things, it'll snowball. This makes me think it might be better if I just swap out the duet boards to ones I'm used to that run Klipper. Maybe even scavenge them for parts to make Vorons since Voron is ongoing with very good documentation. What would you do? 1) Leave them since they work? 2) Update the firmware and if they break, swap boards? 3) Use them for parts for a new printer? I will probably just leave them alone for another couple years. LOL

This work for the SKR 1.3 on Reprap ?

After completing the process to convert my Ender3 pro to Maestro and it working well, I don't feel I will upgrade. What would be the benefits of. Remote, Ethernet, so I could print to the workshop was my reason in the first place. None of this has been easy for me, and I thank you for your, and others clear guidance.

can we do this with our panucat kinetica g2-c boards?

i dont know about anyone else, but I've been running RRF on my SKR v1.4 with the BTT Wifi module for it and Im really struggling to find the "easiness" that people talk about so fondly when using RRF. it might just bethat I've used Marlin for so freaking long and I know that workflow but so much of the RRF documentation seems like a faff and a guess

Once you were at 3.0 you could have uploaded the same full zip file for 3.1.1 and it would update everything, firmware, wifi server, and web interface if needed. No need to use the bin files, the zip file contains it all.

Chris you know that web interface is the same as 2.0xx right? It had all those same visual looks

Hi Chris I am 75 years old and are working with veterans we have a printer with a duet wifi board that we have upgraded to 3.2 can you help us out because we are lost our build plate for is 300x 200 600 an old Mingda printer can you help us out with a config file. Cannot get heaters to work it work on the old 2. Version Can you please help

i have upgraded my firmware to 3.3 and now my part cooling fan won't work My fans have the same config as yours

first