Retract Manual Method
(Basically, electronically wind the brake caliper in so you can service the brakes etc. This is actually better than traditionally forcing the calipers in.)
2.1. Change the transmission gear to neutral or park position.
2.2. Press and hold the push button start switch for 10 seconds, with the brake pedal not applied.
This will place the vehicle in Service Mode (Ignition ON with the engine OFF).
2.3. Press brake pedal several times until the brake booster vacuum is empty.
2.4. Press the brake pedal and press the park brake switch until the orange park brake lamp begins to flash.
keeping the brake pedal applied, release and re-press the park brake switch for approximately 5 seconds.
2.5. Release the brake pedal. The orange park brake lamp extinguishes for a moment after which the rear brake calipers are retracting
Extend Manual Method (Basically exit service mode for the brakes work you've just done).
14.1. Change the transmission gear to neutral or park position.
14.2. Press and hold the push button start switch for 10 seconds, with the brake pedal not applied. This will place the vehicle in Service Mode (Ignition ON with the engine OFF).
14.3. Press the brake pedal and pull the park brake switch until the orange park brake lamp extinguishes and the rear brake calipers are extending.
14.4. Release the brake pedal.
22 авг 2024
