Vocal Sound Booth Whisper Room Build: Part 1Plans, basic frame out and electrical

Подписаться 120 тыс.

Просмотров 228 тыс.

50% 1

Building a Sound Booth whisper room for recording RU-vid Audio 47"x47"x80" booth size modular personal recording booth. Get materials, plans, rough wood frame build, insulation and electrical work.
Exterior booth material, Speaker Cabinet Carpet Covering: amzn.to/3223O8I
Pull Latch, Toggle Clamp amzn.to/39baJiK
3D printing and laser cutting and scanning service info here: www.botzen.com
My Video Gear:
Panasonic GH5 amzn.to/35ZeQgp
Panasonic GH4 with lens amzn.to/2Nb5B7b
Panasonic Lumix 14-140 lens amzn.to/2FOxYmi
PANASONIC LUMIX G X Vario Power Zoom Lens, 14-42MM Power O.I.S
amzn.to/2J3KsJH
Headphones Sony MDR7506: amzn.to/2ycntIV
Samsung 128Gb MicoSD card with adapter
amzn.to/2CcEFzW
Zhiyun Crane V2 3 Axis Brushless Handheld Gimbal Stabilizer
amzn.to/2NKp2kz
Pergear Tripod Tabletop Stand for the Zhiyun Handheld Gimbal Stabilizer
amzn.to/2NaKWjK
My Audio Gear:
MXL 990, XLR Connector Condenser Microphone: amzn.to/3elRw1K
Shure MVi Digital Audio Interface XLR to USB: amzn.to/2VzjgYa
USB-C to Micro usb cable: amzn.to/3cfcrSb
My Hardware:
Apple 16" MacBook Pro: amzn.to/2VrAI0C
Apple Thunderbolt 3 cable: amzn.to/3clTwVV
G-RAID with Thunderbolt 3 amzn.to/2uQppFx
LG 27UK850-W 27" 4K Monitor: amzn.to/3elxpk7
Apple iPad Pro 12.9-inch: amzn.to/2K5qwp7
Apple pencil 2nd gen: amzn.to/3elyisX
Apple iPad Mini 5: amzn.to/2VrJzPP
Slope stand by whip labs: amzn.to/2APaDSt
Extreme pro SD card USB-C reader: amzn.to/3e4bNb1
Apple USB-C to SD Card Reader: amzn.to/3cgGXeo
ThinkTank Shapeshifter 15" Backpack: amzn.to/2Cc6U1F
Arteza Products goo.gl/v9Lda3
Be sure to use the coupon code OHF-TPE-039 for 10% off on purchases.
or try "EricStrebel1" good till Jan 2019
Arteza 24x36" Self Healing Rotary Cutting Mat goo.gl/qiXukm
Arteza 18x24" Self Healing Rotary Cutting Mat goo.gl/DjdRkN
Arteza 12x18" Self Healing Rotary Cutting Mat goo.gl/rio17o
Arteza 24x36" Self Healing Rotary Cutting Mat goo.gl/qiXukm
Arteza 18x24" Self Healing Rotary Cutting Mat goo.gl/DjdRkN
Arteza 12x18" Self Healing Rotary Cutting Mat goo.gl/rio17o
.03 styrene white www.ebay.com/itm/401085113497
.03 styrene black www.ebay.com/itm/401511376750
.06 styrene black www.ebay.com/itm/401640731374
.06 styrene white www.ebay.com/itm/401700315280
Luer lock bottles with needles
www.ebay.com/itm/401616408360
Music: end credits Rurlyok
rurlyok.bandcamp.com
Contact me through www.botzen.com for design work,
you can follow me on:
Twitter: at / botzendesign (@botzendesign)
Facebook: / botzendesign
Instagram: / botzendesign
Botzen Design Inc.
Industrial Design and Product Visualization
www.botzen.com

Хобби

Опубликовано:

5 июн 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 265

@MamaTeri86 4 года назад

Great video! I have just one question and you may have already answered it in this series already.... but do you have a materials list and/or cut list for this project? Thanks for posting!

@EricStrebel 4 года назад

Just the sketch from the first video, series is a guide, customize to suit your space, good luck

@TheMessenger212 4 года назад

@@EricStrebel how much if you were to estimate was everything?

@EricStrebel 4 года назад

Several thousand, depending on the monitor and the electrical you use

@robstaylor4234 3 года назад

@@EricStrebel how much was this one

@sirnuggets9666 3 года назад

@@laurabrown1971 stopppppp spamming this on absolutely every single persons video, can ya'll help me out on reporting these spammers, i've already reported dozens. Super annoying....

@GingerDrums 3 года назад

Hey everybody. Great video. I'm a recording engineer for German TV Voiceover and produce and engineer music professionally. I can only suggest trying to increase the size of this build. I would almost guarantee that a recording will sound better in a bedroom with a matress behind the tallent than in a booth this small. The resonant frequency will be a very, almost certainly masking the voice and there is not enough room set aside for adequate absorption. This makes sense if you are trying to do very budget ADR and really dont have any space, but for musical applications this is almost certainly the worst solution for getting good sounding vocal tracks. I would prefer a small amount of OK sounding room than a boxy, comb filtered sound from a space this small. My booth at home is around 4 times the size, and I still find it better to record singers out in the control room where there is good diffusion and a lower fundamental resonance.

@genesis204 2 года назад

Thank you, this is what I was thinking as wel. Built one of these years ago and upon going back and listening, the vocals were terrible.

@jillianjacques4190 3 года назад

My dads shop I work in we use that insulation foam. The snap in the that stuff is amazingly accurate. If you just “draw” the line you want to cut with your blade a quarter inch deep and then snap the foam board it’s quicker and cleaner than slicing through the whole thickness. It’s the cleanest way to slice it. Works like a charm until the black foam thickness.

@JoshuaWoehlkeMkII 5 лет назад

Can't wait for part 2! Love your work.

@EricStrebel 5 лет назад

Very kind words, thank you

@kris.monroe 2 года назад

Extremely well done! Practical and realistic, with ample coverage while moving along nicely. Thanks for making this video!

@EricStrebel 2 года назад

Your welcome, it works well, I use weekly for my videos

@richiefawlz7842 3 года назад

i'm a music producer and i just relocated and needed a recording booth thanks to you i mimic what you did and created a solid portable vocal booth its been bout 3 weeks now i need to add the carpet,roof and door once i'm done with it i will post the pictures before and after thanks a lot my friend!!!

@EricStrebel 3 года назад

Awesome

@chrisoglevoiceover 3 года назад

Dude, I’ve been sitting out in the car watching this video and totally entertained. Thanks for sharing. Looking forward to other videos.

@EntreMaster 5 лет назад

This is the best video I've seen on building your own booth. So glad I found it because my build has been stalled. Watch your videos about 3 times each and I'm now ready to go to Home Depot! Thank you so much!

@EricStrebel 5 лет назад

Great, post on social media and tag me with your results. Can't wait to see them. Good luck

@EntreMaster 5 лет назад

@@EricStrebel Went to Home Depot yesterday. Spent 4 hours there. Got great help from the workers b/c I used your instructions as my base. The only thing different is that I will make mine soundproof. So, I'm using Rockwool insulation. I will connect w/ you on Twitter and will tag you on SM when finished. It's been raining a lot here in MN and mosquitos are out so I will start project soon.

@EricStrebel 5 лет назад

Boun Vilailath fantastic, best of luck!

@robstaylor4234 3 года назад

@@EntreMaster I would love to see a video of your build

@sendforacar9323 2 года назад

Nice job. Air is great at reducing noise... especially when placed in between two hard materials.

@johnkelley9877 4 года назад

This is very interesting! I will be watching the rest of the tutorials. Thanks for sharing this.

@EricStrebel 4 года назад

Great, much appreciated. Thanks for your support feel free to share with the world on social media

@benjaminashlin 4 года назад

Awesome work.

@Thiastekai 3 года назад

This is so cool! Thanks for sharing.

@girolamo5637 3 года назад

Great work!!

@manasjoshi2939 3 года назад

Hey!great video! It really gave me a guideline on making my own booth

@Castillo.musica 2 года назад

Awesome inspiration and good explanation.

@matthewharrisparker 3 года назад

Found my new bed time stories reader! You had me out in 4 minutes! Great smooth voice. Will have to watch the video again tomorrow zzz

@MrFree-vj8qj 2 года назад

This is not entertainment, your comment is irrelevant

@BitterValentines 4 года назад

Awesome video, I’ve been wanting to buy one of these but they’re quite pricey, this is a great alternative. Thanks!

@sunshinemand 4 года назад

Gorgeous dog!

@QuinnHale 5 лет назад

Thanks for sharing all the work you do. It's always valuable information. I've done some acoustic oriented work like this over the years. What I've discovered is that this type of build is a lot more work than return without the proper use of materials. One of the reasons that gypsum board is used in this type of construction is that it doesn't transmit sound waves as efficiently as wood does. Even with boards made for acoustic dampening, multiple layers are required. Your construction is solid but it appears to essentially be one big sound board. As someone else here stated, that pink insulation will do very little to dampen sounds waves. I've had much better luck with cheap, acoustic blankets. Even in the same room as my computer I've achieved decent isolation. Your voice overs sound good. I would just focus on bass traps in your space. That's mainly what I hear on your channel, and I think you'll experience the same effect in that small booth even with acoustic foam. The plywood will vibrate to the framing and then to the other sheet of plywood. Condenser mics are so good these days. You don't need a whisper room to get great audio work done. I really do enjoy your channel. Please accept my 2 cents. I'm told it won't even buy a cup of coffee though. Sorry. Thanks for the constant entertainment.

@jasper_north 2 года назад

Check this: I also bought myself a $100 Gazebo / Pergola (200cm x 200cm) and placed it in my basement on a noise absorbing rug. I left the outside "walls" off and placed moving blankets on all five sides. Got myself a 10M led strip for the inside and some bass traps in the corners and foam on the inside off the blankets. Super easy set-up for recording with my D18 and singing at the same time straight into my iPhone using the Roland Go Pro mix. Call me cheap but I just love my little "tent" inside my basement. Nice and cozy. Love your channel man!!

@coybi 2 года назад

My God, your voice is so soothing I feel like falling asleep

@DEE-nr1oi 3 года назад

Best booth build so far

@DEE-nr1oi 3 года назад

Wish i could give this a second like for detail,....well done man

@EricStrebel 3 года назад

Thanks

@rezamoini8057 2 года назад

good job sir.very clean and neat it was well made..congratulation

@droydrida7541 3 года назад

woww great job dude , simply to realize and very useful , thanks a lot 🤗

@duckilythelovely3040 Год назад

You can also just get really cheap 1/4-in 4x8 plywood, get five pieces. Just connect them with solid strong hinges in the corners. That way you can fold it. Then just line the outside and inside with thick moving blankets. Attach a light to the top of it that is rechargeable with a battery pack. Drill a power strip onto the inside a slim one make it look nice. Simply run that wire through a small hole out of the wood. There you go you have yourself a cheap and easy to make portable booth that is super sound deadened light enough to carry. You can add to nice big straps so you can carry it.

@ArtyMars 4 года назад

Omg i'm making one of these too! But my bedroom ceilings are like 12 feet tall so i want to make one big enough to turn the top into a bed for my mattress haha - a loft bed that doubles as a stream-booth for podcasting haha.

@EricStrebel 4 года назад

Awesome, good luck post on social media when you're done so I can see @botzendesign

@DewaveProductions 11 месяцев назад

Nice tools

@hfranke07 5 лет назад

Nice projct wit many great designs. I would never use Phillips screws. They are an old and outdated design. I always use torx. They are stronger, can be removed often without loosing the grip to the screwdriver. And I would always use wood glue to put things like this together. Using glue makes your structure much stronger and wood glue is inexpensive, easy to use and nontoxic.

@pamela6922 9 месяцев назад

Love this. Love the confession of the 3" short-cut of the plywood. I'm guessing that you relied on the measurement of the foam insert and just forgot the frame in that miscalc? Doesn't matter; nice to see that even a brilliant guy can goof in an honest way. Haven't we all had to remind ourselves to "measure twice; cut once"? Thx for the detailed vid.

@paulmccormack2843 2 года назад

Tidy work sir 👍👍

@familywork8398 3 года назад

Good show and illustration. done for you from new friend

@LokeshThakurMusicDirector 3 года назад

Nice information ❤️☺️

@g.m.gcreations7779 3 года назад

Superb

@MisaSantaCecilia 2 года назад

Great video!

@EricStrebel 2 года назад

Thanks, check out the whole series I hope you like it.

@MisaSantaCecilia 2 года назад

@@EricStrebel if you paid yourself your standard rate for your carpentry work, what would be the cost of your booth including materials? Thank you

@EricStrebel 2 года назад

I would need to get about 7k to build one

@MisaSantaCecilia 2 года назад

@@EricStrebel thank you, your work is amazing.

@EricStrebel 2 года назад

Thanks

@JackPott554 5 лет назад

Sheetrock is important as its the mass that does the work, styro is full of air holes which is great for warmth but not so good for acoustic absorption

@EricStrebel 4 года назад

Works pretty good in my case, I would have added some low mass vinyl had I known about it. All a nice dead space to record audio in. Works very well and creates a nice sound for me.

@aqtaii 4 года назад

cool vid

@EricStrebel 4 года назад

Thanks, feel free to share on social media!

@sharonlee4773 3 года назад

Great vid,thanks. You have Iggys younger voice!

@LearnTrainPlay 3 года назад

well it looks great but I don't have half the tools needed to do this but I would love my own whisper room

@Kevin-wi7kt Год назад

This is exactly what I wanna do, but mine would by 6ft x 6ft for inside dimensions. I just couldnt decide if I wanted to make each wall 1 whole piece or make each wall into 2 separate panels because I want it to be modular and for ease of getting the walls in or out of the house

@MrFree-vj8qj 2 года назад

How is the soundproofing of styrofoam? It seems too lightweight, maybe fiberglass would be better ? Great video, excellently built

@VibeASMR 4 года назад

Awesome intro line because I film in my closet and I'm trying to come out too 🤣

@ArtyMars 4 года назад

I'm already out but i've gotta do it all over again because, same hahaha

@ray1ashwin 4 года назад

I accidentally played this video n i wasnt even paying it much attention n i though i was watching a vice video or some other high budget documentary becoz of your voice.if you marketed your voice at the right time in a rght place with tad bit of luck n leap of faith,im sure your hansome voice will be famous n you will oneday be rewarded handsumly.😁best of luck bro👌

@EricStrebel 4 года назад

So glad that you enjoyed it. Feel free to share with the world on social media. Much appreciated and thanks for the comment.

@AIanarchy2055 4 года назад

Best vid I've seen so fat about vocal booths I too have the 80 inch limitation and this definitely helps me out i have to go upstairs

@slbabb 4 года назад

I was wondering what on earth you were doing until you mentioned that you aren’t interested in actual sound isolation because you’re putting this in a very quiet location. Sound isolation is the whole point of most vocal booths, which is why they’re so much denser and heavier than what you’ve build. Basically you created a relatively airtight closet, which is perfect for your needs, but nothing like all of the other commercial and DIY vocal booths. Very good video, but I need a real sound isolation vocal booth.

@Alice-un3kq 3 года назад

Thank you for saving my time. I'm looking to build a more professional booth as well and it's hard to find anyone talking about stuff that will actually help a voice actor. :/

@Cubanoroller 2 года назад

How well does this eliminate sounds? I know it’s not sound proof but Can we get a sound decibel test from both the inside and outside of the booth to see how well the foam works?

@omarsantiago9102 4 года назад

Do you think you can posta lost of all the material you boughr please.thank you

@christianlifemyanmar8593 4 года назад

I would like to ask one question about air flow. Is it ok to put aircon inside?

@robstaylor4234 3 года назад

any idea how to use this set up and make a sound proof space

@garagemonkeysan 5 лет назад

Great video. Nice solid build. All you need to add is a Karaoke machine. : ) Aloha!

@FedericoMusic_ Год назад

Hi. If you wanted more insulation, without sacrificing weight, what would you add to the walls? Can you please tell me the technical name of the stereo foam you used? Thanks.

@706madeflo 3 года назад

i need one to keep outside

@Arman... Год назад

15:05 pretty entertaining angle

@Gshadow1000 3 года назад

What type of wood/plywood did you use for the vocal booth???

@daltonharrison1 3 года назад

How did you wire everything up?

@caluesenpai4986 4 года назад

wow so many pc. hope i have those to make a better pc

@tntcheats 4 года назад

I assume you considered some alternatives before starting, so I'll ask: why did you opt for the pink insulation instead of stone wool? Why did you opt for an internal outlet box instead of keeping the laptop outside the room, with just an HDMI cable, power cable for the monitor and XLR going outside?

@EricStrebel 4 года назад

I don't like fiberglass, did not want to deal with it. Laptop is outside in the holder with cables routing inside to mic and monitor, wireless trackpad and keyboard, look for update soon for the ventilation

@bosckrobyne6365 4 года назад

👏👏👏👏👏👏👏

@beats-by-skrill8925 2 года назад

Question. Do you think using the light cement like you did will be good to use to luminate mass loaded vinyl onto plywood and do you think it will hold???

@EricStrebel 2 года назад

Maybe, but I think contact cement would be better

@brianduffy3633 2 года назад

You have a table saw and a router, but not a jigsaw or a handsaw... Crazy! Project looks good though :)

@EricStrebel 2 года назад

Thanks

@RealizingICreateHappiness931 4 года назад

How much did this cost you to make?

@ramakrao7356 4 года назад

thnx sir huge fan from India.. i was looking for Somthing like this for my studio setup as i have some buget crisis .... plz can you tell that which is that foam kind of sheet??

@EricStrebel 4 года назад

building foam insulation that we can get from the building store

@illestofdemall13 3 года назад

They make shallow electrical boxes.

@bernardomanara389 Год назад

Hi, thank you. I need to build a booth for playing tr un mpet inside without disturbing my family. Some advice?

@azanazam5644 2 года назад

Can we use eggs trey for wall

@mikemcpeak777 3 года назад

I saw that you put a door handle on but what did you use to secure the door once its closed? I really enjoyed all of your videos on this build.

@EricStrebel 3 года назад

Screws

@laurabrown1971 3 года назад

One of the Best Ideas of SoundProofing is "SoundProof Curtains" it actually Block outside Noise coming from Windows. Check Here: livesoundproof.com/best-soundproof-curtains/

@motoglows 2 года назад

Hey man, I was wondering if it would be possible to add a decent size hole for air, also if you can would it be good to put a foam wrap in the hole.

@EricStrebel 2 года назад

See the next videos in the series

@buckstarchaser2376 4 года назад

5:40 The reason you cut that plywood a few inches short is because you mocked up the frames with the back wall inside the two side walls. You were making room for that panel when you measured the ply shorter.

@RyanStone143 5 лет назад

Great use of e-waste! 6:20

@astro.mp3348 4 года назад

Ok boomer

@JimmyCreekyCrawfish 4 года назад

Got the same old PC as the black and gray dell.

@angryburrito7411 Год назад

Can you give us an update on how this booth is holding up/performing? Would you make any changes to the design? Thanks

@EricStrebel Год назад

Holding up well. I use it for every video I make. Would not change much, perhaps some sort of a way to remove the electrical grounding hum, and a four outlet plug inside the booth.

@hellrazer9020 7 месяцев назад

The final product looks amazing! Did you also draw out the plans with specs?

@EricStrebel 7 месяцев назад

Nope

@hellrazer9020 7 месяцев назад

@@EricStrebel thank you for the response. Im trying to figure what i want to do with my available space. I have never built anything before. Im good at welding though

@damonwicketts1638 2 года назад

What if we don’t have enough pcs to hold down the walls?

@stoneschanify 3 года назад

@15:07 for a second I thought I was on the hub watching a glory hole video lmao

@ayanaali546 3 года назад

Where did you but the foam that you glued on for the inside on the booth?

@EricStrebel 3 года назад

I got it from an orange big box home improvement store

@darinmbicknell 4 года назад

Hot wire cutter?

@JayCasinoOfficial 3 года назад

what was the total overall cost of everything?

@JohnEdwa 5 лет назад

Everything else looks pretty neat, but I have my doubts about embedding the LED panel and the power supply into the insulation foam. LEDs still run rather hot and usually use the alu backing plate as a heatsink, I would at least drill a few vent holes above the panel to let the hot air escape.

@EricStrebel 5 лет назад

, that sounds like a good idea I was sort of thinking the same thing myself

@LMFAO310 4 года назад

The beginning was a huge cry for help and to I’m here to tell you that it’s okay.

@EricStrebel 4 года назад

Thanks

@JohnyBllaze 4 года назад

Hey man, you know those little gray and red clip thingies you have around the booth that are holding the frame together.. what do u call those and where can i get them?

@EricStrebel 4 года назад

Check the description for the link as well. Toggle clamps Pull Latch amzn.to/39baJiK

@JohnyBllaze 4 года назад

Oh mannn thanks so much, u are the best!

@Fergusonm23 4 года назад

Hi, why exactly did you glue a small wood strip on one of the wall frames? Thank you, please advise.

@EricStrebel 4 года назад

Actually, I think you are referring to the cardboard that I added. One of the pieces of styrofoam was a little bit thicker than the other three so I needed that additional thickness for the foam to fit inside the frame.

@adrianaferreira6128 3 года назад

Not sure if you mentioned this. But what are the dimensions of the ply wood that you put as the walls? Need to know the thickness

@EricStrebel 3 года назад

.25 inch

@HeWrd-fg8gg 5 лет назад

What's the name of the pink foam panels with the pink panther ? I have only see pink isolation wool in all other builds. Thanks

@EricStrebel 5 лет назад

Pink foam insulation

@HeWrd-fg8gg 5 лет назад

@@EricStrebel Thanks, would you know the difference between the Pink foam insulation & the Regular pink sound wool i see so often ? I live with other people in an appartement, also have neighboors & must do the best sound isolation i can .

@AdventureswithJack453 4 года назад

@@HeWrd-fg8gg Do not use the pink Foam as it does nothing for sound absorption. Use rock wool. Also use acoustic drywall instead of regular drywall.

@lttr.z 4 года назад

Thank you so much for this!!! Are you using laminate and contact cement to glue the plywood to the foam?

@EricStrebel 4 года назад

You're most welcome. I'm using water-based contact cement. Feel free to share on social media with the world. Thanks for your support and comment Much appreciated.

@miguelangelelbuho1211 3 года назад

Came to look into building my own. The prices for a pre-built one are ridiculous! I'm sure materials didn't cost you over 5k! Unbelievable quite honestly..

@NoNovaCain Год назад

i need your help if posable. im trying to build one and i need help. just with directions or a blueprint.

@tkmsound 3 года назад

Would have been awesome if you wrote down the exact measurements of everything piece by piece as a blue print to take away.

@EricStrebel 3 года назад

Yes, that would have been excellent, use the sketch in the first vid it has dimensions

@rickmarr9634 4 года назад

7:52 ROTO ZIP!

@taviusleverett8812 Год назад

how many tools bro? I don't have access to all those..

@chanchalsharma8383 3 года назад

which type of foam you have used in this ?

@EricStrebel 3 года назад

Pink insulation foam

@berkpick 2 месяца назад

Did you account for ventilation?

@EricStrebel 2 месяца назад

Later in the video series

@abuahmad1918 10 месяцев назад

Hi Eric , I really found your vocal booth very interesting , how much would you sell one like this if someone want to buy ?

@EricStrebel 10 месяцев назад

Glad you liked it. 10k

@Made2hack 5 лет назад

With that many computers, are you secretly coming out as Linus from LTT?

@AmericanYeti 4 года назад

Ahh. A man of culture

@JimTheKid 4 года назад

Ltt is the best

@parthnagraj7253 4 года назад

how much was all this?

@BrandonReevesmike_reeves23 2 года назад

Hi Eric! So first of all, kudos to you for making this video because it has been extremely helpful to me as I copy and tweak your design for my own booth. It has taken me about two months and about 150-200 hours of work to be about 95% done. I’ve watched all videos of your series on this booth at least three dozen times and I couldn’t figure out why you were so frustrated down the stretch when everything looked amazing…. Until I got about 70% done myself 😅 yeah it gets…. Infuriating lol But anyway- I’m looking now for the plastic sleeves you put on the outside of the booth. Did you have those 3D printed or did you purchase them somewhere? I can’t really find something like that. In theory, I could use some of the wood scraps to make some myself but this would save me some time if I could outsource this portion of work. Anyway, thanks again for the design! Super helpful! I’ve recommended this series to a few others in the industry looking to DIY their booths. Be well! -Brandon

@EricStrebel 2 года назад

Glad you like the videos. Hope your booth comes out fantastic. I printed those baffles on my 3D printer

@BrandonReevesmike_reeves23 2 года назад

@@EricStrebel If you don't mind-- what was the blueprint you used? I have a friend with a 3D printer and I may ask for his help to fabricate the laptop and hard drive sleeves.

@EricStrebel 2 года назад

No blueprint exists, just used the dimensions of the parts and holes used

@BrandonReevesmike_reeves23 2 года назад

@@EricStrebel I just uploaded the promo for my video series on my booth! I linked your series in the description. Here’s a link to my video: Sound Booth Series Promo ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qJr2dWl12YY.html

@georgelam-yoyo4281 4 года назад

Where do you get those foam boards?

@EricStrebel 4 года назад

At any big box home store

@georgelam-yoyo4281 4 года назад

@@EricStrebel thanks I ve founded it at home depot for around $30.32+ tax

@Nyangaoo Год назад

13:00 I hate doing this stuff but leave a like (its something I did)

@gb.recordings Год назад

I don't have no experience in building but I want to know how much would you charge me to build me one I need a boost bed in my recording studio about the same size I have a small room

@EricStrebel Год назад

Contact me through www.botzen.com

@beardedswordsman2901 4 года назад

Why foam? Roxul safe n sound don't work?

@EricStrebel 4 года назад

It's what I had access to so I used it it's also light weight and relatively cheap

@eman0828 3 года назад

May work for voice over work but def don't recommend it for Vocal Production. For professional vocal production when recording vocals you need a large enough room with proper room acoustic treatment and some defussion to scatter the sound through the room. Recording in a small soild box will sound very boxy and cause Comb Filtering and distortion issues.