Тёмный

Volkwagen Polo 1.2 TSI PCV valve broken causing engine check light and power loss 

Carcareena Detailing
Подписаться 1,4 тыс.
Просмотров 59 тыс.
50% 1

My car suddenly looses power and engine light started to show. Upon checking in the engine bay, I notice something is broken. Do some research, it probably to do with crankcase ventilation system. Replace it and the issue is gone.
Volkswagen Polo 1.2 TSI 2011 6R with DSG 7 Dryclutch
220,000KM, 8+ years old.
I am not an expert. Just sharing.

Опубликовано:

 

9 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 134   
@avivazran8750
@avivazran8750 Год назад
thank you very much, you solved my problem. i spent hours to understand where the oil smoke come from
@Hanzilla75
@Hanzilla75 Год назад
This exact problem has happened on my 2011 VW Caddy 1.2 TSi twice. Those plastic PCV valve hoses are complete trash. I took my car to an authorised dealer garage and the first time it was a straight fix, but the second time they wanted to charge me 4 times as much becuse they wanted to dismantle the engine to find the 10mm end of the pipe that had broken off and went into the oil system. I have rejected this additional precautionary check as it is mainly for the gararge to have their backs covered. They know full well that these plastic valves are trash and break off so they should be more careful removing and replacing these parts. I will now get my car back and keep an eye out for oil leaks and and loss in power or excessive oil usage. If you do fix this rourself try and see if you can remove the whole broken-off end pipe from the hole it goes into WITHOUT it falling into the engine. I am hoping in my case it will fall through to the sump or oil filter.
@MR-RapidReels
@MR-RapidReels 2 года назад
I love you I was searching for like 2 weeks to get this product code omg you helped me out
@CarcareenaDetailing
@CarcareenaDetailing 2 года назад
Awesome!
@dylanottens5043
@dylanottens5043 5 месяцев назад
How bad is it when the piece fell into the motor?
@isaacwkng2014
@isaacwkng2014 3 года назад
I have the same problem for my 2011 Polo 1.2. When check with mechanic, he mentioned that there is a lot of 'carbon shit' inside the valve/host that lead to 'wind' not enough. He advise instead of engine oil to change at every 15k (recommend by VW), we should change every 5k to keep the engine longer life, due to the fact that turbo engine is very sensitive and should need to take care. Fyi, I have almost change everything, Plug Coil, megatronic, valve (don't know what is that call), and the last thing is the host that stuck with carbon. hopefully everything will be okay.
@CarcareenaDetailing
@CarcareenaDetailing 3 года назад
Great sharing. I also changed like what you did upon 8.5 years of ownership and sold the car last year. Car was running great. From my learning, the pcv valve is responsible to keep the intake clean. If fail or broken, more of dirty oil will go into the car intake and gunk up the throttle body thus require frequent cleaning.
@isaacwkng2014
@isaacwkng2014 3 года назад
@@CarcareenaDetailing I was thinking to sell it as well, but looking at the resale value, the amount of $$ that has fixed.... forget it then. it is a nice car to drive tho.
@ftgreensong9753
@ftgreensong9753 Год назад
@@CarcareenaDetailing hello, is this product code also compatible with Seat Ibiza CBZA engine?
@CarcareenaDetailing
@CarcareenaDetailing Год назад
@@ftgreensong9753 likely, but i do not know for sure. Sorry
@sixtustholoana2266
@sixtustholoana2266 2 месяца назад
What was the description of the fault code from the diagnostic machine?
@slafouf
@slafouf 4 года назад
Hello Haniff, same for me. thanks for this share. But I have to inform you that I think the engine warning light comes from the stretched timing chain... And this is another kind of consequences if not fix in time. I got this problem too on the 1.2 tsi engine from July 2010. Ask me if you need more informations
@CarcareenaDetailing
@CarcareenaDetailing 4 года назад
Mehdi O. The engine light disappeared after i change this thing. And yes I did also change the timing chain at different time. It seem like a common thing this type of 1.2 tsi engine to stretch the timing chain after long mileage(mine i start to hear the rattling after 200k KM). Additional note. After like 2 month of this fix, engine light came back. I cleaned the throttle body and it is cleared. Back to normal problem free.
@s.91.a
@s.91.a 4 года назад
any tips on replace rocker cover gasket for this car? I have same car, 2010 vw polo 1.2 tsi. My mechanic went to replace gasket because of oil leak but to remove the rocker cover, have to remove the timing chain. Any other way around this?
@CarcareenaDetailing
@CarcareenaDetailing 4 года назад
I dont know about rocker cover. I havent went through that i beleive so i cant advise based on my limited knowledge. However i want to share about timing chain. This engine has issue where timing chain will stretch after long time. Happen to my car around 200k KM. this. consider change timing chain. And for the throttle body, i never completely remove from the car. I only remove the pressure pipe to access the intake port to clean it while its still attached.
@lazer5582
@lazer5582 2 года назад
Is this the same valve that causes fumes to come into the car with heater blower on?My 1.2 Skoda tsi hasnt lost any power,no lights coming on,just strong smell of engine fumes.
@CarcareenaDetailing
@CarcareenaDetailing 2 года назад
I am not sure if it is relateable. I could be too since it is something to do with blow by gas that not effectively being cycle back into the intake and leak out. But i am no expert. Please seek help from the pros.
@johngalbraith1591
@johngalbraith1591 2 года назад
I can confirm this fixed mine on a mk6 golf 1.2 tsi had strong smells of petrol in the cabin and wen i inspected the engine bay and had leaking oil realised it was this exact valve had literalky melted off with wear and tear i replaced the part and no more smells of petrol in my cabin so sorted it out i never had to remove the whole pipe jus replace the connection what was broken
@johngalbraith1591
@johngalbraith1591 2 года назад
I can confirm this fixed mine on a mk6 golf 1.2 tsi had strong smells of petrol in the cabin and wen i inspected the engine bay and had leaking oil realised it was this exact valve had literalky melted off with wear and tear i replaced the part and had no more fumes of petrol in my cabin so it sorted it out i never had to remove the whole pipe tho jus replace the connection that was broken!
@CarcareenaDetailing
@CarcareenaDetailing 2 года назад
@@johngalbraith1591 👍
@LUCAS-u7n
@LUCAS-u7n 6 дней назад
i can´t find this pcv, HELP
@CoreMaster111
@CoreMaster111 4 года назад
This exact same piece on my car is leaking oil. Have to take a closer look to see if it's broken or I just need to reseal it. I checked online to see what parts number it has on my car and it says there is no replacement part and does not show any parts numbers decpite my car having the exact same engine. Skoda Rapid with 1.2 TSI CBZA. Hopefully I can fix it easily.
@victoriagpeavilablanco9936
@victoriagpeavilablanco9936 10 месяцев назад
Disculpa donde puedo conseguirla, no la encuentro por ningun lado
@ads13998
@ads13998 2 года назад
Hello! May some EVAP trouble code relate to this? And some slight oil consumption? (~2L/10.000km) 1.2tsi 105cp CBZB.
@CarcareenaDetailing
@CarcareenaDetailing 2 года назад
Hi. I didnt get the codes. Im sure the car at that condition lose oil and need topup from time to time.
@JamesHenderson-o2y
@JamesHenderson-o2y Месяц назад
Anyone know where I can get one of these parts? (UK) Not even VW can find me the same part
@CarcareenaDetailing
@CarcareenaDetailing Месяц назад
@@JamesHenderson-o2y you can try ebay maybe
@leiriano
@leiriano 3 года назад
Did you clear the fault code or did the check engine light go away on it’s own?
@CarcareenaDetailing
@CarcareenaDetailing 3 года назад
It go away on its own after a while
@yarkeeee
@yarkeeee Год назад
I have 1.2 Polo (2002),and it has problem with oil consumption.However there is no smoke and no leaks.Can you help me solve problem?
@CarcareenaDetailing
@CarcareenaDetailing Год назад
Hi. I am not a qualified mechanic. Best if you send your car for inspection. 😊
@MarcoPerin
@MarcoPerin Год назад
The plastic piece that fell inside the engine has caused any problems? Is it necessary to remove it? My car have the same problem and the plastic piece is inside, please help me! Thanks.
@CarcareenaDetailing
@CarcareenaDetailing Год назад
From my understanding from this video discussion, the piece will be destroyed by the engine mechanical movement. Shred into pieces and stuck at oil filter. I have no engine issue until i sold the car. So never seems to jam the engine head. But if you want to find and remove it, also a big task. 😁
@mir6301
@mir6301 2 года назад
Jetta 1.2 tsi mk6... my car has a problem of acceleration after a misfire while going up to high rpm. Could it be due to this part? There is a high pressure gas pump as a malfunction, but there is no problem in normal use and there is no sound from the pump. We could not fully resolve the issue. I would really appreciate if you can help.
@CarcareenaDetailing
@CarcareenaDetailing 2 года назад
Hi. I wish i can help but i am not a pro on this matter. From your problem the symptom is different with my isssue. Plus i can physically see the broken piece and i just replace it. It only gave me engine light and cut off power. After change the piece engine runs great.
@ulziiduurenu6403
@ulziiduurenu6403 Год назад
Hi there. I have exact same problem. Did you got any resolution?
@MagnetixMVM
@MagnetixMVM 3 года назад
I have the same car and when i drive through the city and i have to use the clutch often the car starts accelerate itself when i press the clutch to change gears can this cause that problem too
@CarcareenaDetailing
@CarcareenaDetailing 3 года назад
My car is equipped with 7 speed DSG (dry clutch), however i dont think gearbox can make the pcv to break.
@purpleeyes9472
@purpleeyes9472 Год назад
Salam bang...sy ade masalah epc die dtg ON n OFF...bile tgh bawak die dtg n kereta jd semput n xleh pegi...tp bile off engine n on blik die hilang...pastu kdg die jd semula...sy nk hilangkan epc tu sy off n on engine semula...itu masalah ape ye
@CarcareenaDetailing
@CarcareenaDetailing Год назад
Tu rasanya banyak punca. Tu sbb enjing tu yg cut power utk prevent damage. Salah satu benda yg saya tuka ni la. Kene cek
@zhaotje
@zhaotje Год назад
Nice video mate. But how did you remove the hose in the middle on top of the suction jet pump seen at 2:20? I've tried to get it loose but seems stuck.
@CarcareenaDetailing
@CarcareenaDetailing Год назад
Thanks. If i recal correctly, the one connecting to the head cover is the one that broke. It is just fit by the rubber grommet. So just pull.. is this what you reffering to?
@zhaotje
@zhaotje Год назад
@@CarcareenaDetailing there is another plastic connector clip in the middle that is very hard to get unplugged. It is on top and round looking. I'll will give it a try again next time. Thx
@CarcareenaDetailing
@CarcareenaDetailing Год назад
@@zhaotje the whole piece that i remove and replace in this video is a one part number. It cannot be saperated. But if you are talking about another connection to the whole unit other than the head one that broke it connect by a clip. U need to find the clip and pull it sideway from the direction of the hose. Or push. Sorry i just trying to recall. It has been a while. And i already sold this car.
@N-e.o
@N-e.o 2 года назад
Hello i bought the same car with the exact same engine and when i look at this pcv pipe there is nothing there? Is it possible it got deleted by VW ?
@CarcareenaDetailing
@CarcareenaDetailing 2 года назад
Oh really. Maybe improved version. Is yours 105ps 175Nm?
@thomastoft2787
@thomastoft2787 3 года назад
Has anyone tried loosing the rubber gasket inside the engine and problably also the broken plastic piece. Will i get a problem sooner og later with a smashed piece inside an oil channel and thereby get issues?
@CarcareenaDetailing
@CarcareenaDetailing 3 года назад
From other commenter, he spoke to the SC they say it will go in the engine moving parts below and get crushed. And little bits will stuck at the oil filter. This will be removed in the next oil changed. I heard this from 2 sources. Surely this will not go into the combustion chamber.
@DooPardoo
@DooPardoo 2 года назад
thanks! can you share a link to buy this product?
@user-uj1eu1ig5g
@user-uj1eu1ig5g 4 года назад
HELLO ! MY POLO 1.2 TSI 2011 ITS HARDLY STARTING UP!!! I HAVE TO TRY TO START THE ENGINE 5-6 TIMES EVERY MORNING TO START UP THE CAR ! NO ENGINE LIGHT SIGNAL OR ANY OTHER !!! AND I SEE THAT THIS PCV VALVE IS FULL OF OIL !! AND I CAN EASILY SPIN THIS !!! MAE THIS IS THE PROBLEM THAT MY CAR CANT START UP WITH THE FIRST TRY ?
@CarcareenaDetailing
@CarcareenaDetailing 4 года назад
Well I am not a car expert, that pcv system will feed that gasses back to your intake and it flows back into your engine. I will go through the throttle body. My logic is if this gases is dirty, it could dirty your throttle body. What i would do is i will open the intake pipe that connect the air intake to the throttle body. And check if the throttle body and clean it using throttle body cleaner. I did this after i change the pcv valve. Remember not to use your finger to push the throttle body valve opening with your finger as it may damage it, ask someone in the driver seat to press on the gas paddle instead. AGAIN I AM NO EXPERT! 😬 video at 1:53 shows the throttle body intake conveniently facing up. Switch car on (no need to start engine), press on the throttle, the flap will open, you should see gunk build up. Use soft toothbrush and throttle body cleaner spray. Clean it good. Be gentle, dont drop anything inside!
@yordimooij
@yordimooij 2 года назад
What is the number of the rubber piece? Its broken, but i cant find one.. i bought the valve but there isnt a rubber piece inside..
@CarcareenaDetailing
@CarcareenaDetailing 2 года назад
Hi. Refer 2:07 for the rubber grommet part number
@yonatancohen7379
@yonatancohen7379 Год назад
Hi i have same issue should i take apart the cyclender head cover to find the broken peace?
@CarcareenaDetailing
@CarcareenaDetailing Год назад
I am not sure. Potentially need to open the engine piece by piece. Hope it will crush and stuck in the oil filter
@yonatancohen7379
@yonatancohen7379 Год назад
@@CarcareenaDetailing update I found the peice buy trying to remove the valve cover.... And accidentally broke the camshaft bolt No idea where to go from here car won't start .....
@CarcareenaDetailing
@CarcareenaDetailing Год назад
@@yonatancohen7379 car wont start after you reinstall the bolt cover?
@yonatancohen7379
@yonatancohen7379 Год назад
@@CarcareenaDetailing no the camshaft is not connected to the timing ring the bolt broke
@CarcareenaDetailing
@CarcareenaDetailing Год назад
Better talk to proper mechanic.
@cmsea280
@cmsea280 5 лет назад
Wow with 220k km on Polo. My breather valve got sign of oil leak, would you recommend to change it?
@CarcareenaDetailing
@CarcareenaDetailing 5 лет назад
CM Chai if its on the head cover maybe u can just change the grommet seal. But the entire thing that i replace is RM500 quite expensive. If not broken no need change. Grommet only rm10-20
@cmsea280
@cmsea280 5 лет назад
Thanks a lot. Really appreciated your reply.
@chessboxer35
@chessboxer35 5 лет назад
Haniff Rahman what was the oem part number if the valve unit you used friend ?
@CarcareenaDetailing
@CarcareenaDetailing 5 лет назад
Berean www.ilcats.ru/vw/?vin=WVWZZZ6RZBU020648&function=getParts&market=RDW&model=PO&modelcode=672&year=2011&group=1&subgroup=133&part=133030&language=en
@juvensiolungu4929
@juvensiolungu4929 6 месяцев назад
Where could i find the replacement part?
@CarcareenaDetailing
@CarcareenaDetailing 6 месяцев назад
In Malaysia, can find in local marketplaces or can order from spare part shops. Just use the part number.
@juvensiolungu4929
@juvensiolungu4929 6 месяцев назад
@@CarcareenaDetailing would you assist me with the part number…? Kindly share the link if it could be found online
@CarcareenaDetailing
@CarcareenaDetailing 6 месяцев назад
@@juvensiolungu4929 2.05 i shared a screenshot. U can put you VIN at partsouk.com and try see if your variant has same exact part.
@juvensiolungu4929
@juvensiolungu4929 6 месяцев назад
@@CarcareenaDetailing Thank you…!🙏🏾
@itsoah_fpv1509
@itsoah_fpv1509 3 года назад
Benda ni ade kene effect pada throttle body pnya valve xnk open jgk ke abg? Tq in advance utk jwpnnya
@CarcareenaDetailing
@CarcareenaDetailing 3 года назад
PCV valve ni lebih kepada mechanical dari electrical. Saya tak rasa ada direct impact. Tapi kalau nak relate, bila pcv system tak berfungsi meneyabab kan lebih banyak minyak kotor akan masuk balik dalam engine. Dan menyebabkan throttle body kotor/gunk. Saya ada jugak clean throttle body lepas tuka valve tu. Tapi tak 100% sure kalau kotor tu sympton utama pcv syatem fail. Saya tak pasti la kalau kotor boleh sampai throttle body failure. (Side note, kalau tekan trottle body valve opening pakai jari boleh rossakkan throttle body, waktu cleaning saya tekan throttle(paddle minyak) supaya dia electronically open)
@itsoah_fpv1509
@itsoah_fpv1509 3 года назад
@@CarcareenaDetailing sy baru kene jgk problem pcv valve ni, dia patah same mcm kete abg, timing idle jd xbetul, first time kene dkt throttle body time bwk biasa tiba2 dia cut trs tekan dkt pedal no respon, kluar code P0122 & PO222 pedal position sensor switch A & B circuit low, bila try service throttle body still same je, the swap tb okay semula, mgkn dia blh rosakkan throttle body juga sbb pada area pcv valve yg patah tu bnyk gunk mnyk... Still dlm rnd lg, sbb milage bru 118k km dh kene tb😅
@CarcareenaDetailing
@CarcareenaDetailing 3 года назад
@@itsoah_fpv1509 kalau ada warranty boleh claim tu
@Kecepper
@Kecepper 2 года назад
Klau bocor bnde nie mmg xboleh tekan lgsung ke 40km je lpas kete aku haha
@user-vf6hk1dv6p
@user-vf6hk1dv6p 8 месяцев назад
What website do you use to get the list of parts?
@CarcareenaDetailing
@CarcareenaDetailing 8 месяцев назад
U can use partsouq.com put your VIN number. U get your part number specifically for your car
@user-vf6hk1dv6p
@user-vf6hk1dv6p 8 месяцев назад
@@CarcareenaDetailing hmm, it doesn’t accept my VIN
@CarcareenaDetailing
@CarcareenaDetailing 8 месяцев назад
@@user-vf6hk1dv6p oh really. Maybe you can google other similar sites that have the vehicle parts catalog. Try use them
@the_price_Faysal
@the_price_Faysal 4 года назад
Is there another pcv valve in the motor?
@CarcareenaDetailing
@CarcareenaDetailing 4 года назад
Not that I am aware of. You may ask the experts.
@zubairahmed9210
@zubairahmed9210 3 года назад
Bro did you take out the broken part or just left it there ?
@CarcareenaDetailing
@CarcareenaDetailing 3 года назад
No, left in there
@darkoqc1670
@darkoqc1670 3 года назад
Does it make you any problem the piece of the broken part that fell inside? Ive just broke the same part and fell inside, i dont know what to do???
@CarcareenaDetailing
@CarcareenaDetailing 3 года назад
@@darkoqc1670 i dont really know to be honest. The only way to take it out is to strip down the engine which cost a lot.
@darkoqc1670
@darkoqc1670 3 года назад
Ive just spoke to my mehanic, he says no big deal, its just plastic, the engine will gonna crash it, and all it goes to oil filter, thankk you for your answer again
@CarcareenaDetailing
@CarcareenaDetailing 3 года назад
@@darkoqc1670 thanks for verified. That was my hope as well.
@tariqismailpatni1714
@tariqismailpatni1714 10 месяцев назад
Please help me where to order the spare you have replaced
@CarcareenaDetailing
@CarcareenaDetailing 10 месяцев назад
I order from local auto part supplier shop. I dont remember the shop name. But it is quite easy to ask any part shop they will order from their supplier. Just give them the part number
@tariqismailpatni1714
@tariqismailpatni1714 10 месяцев назад
@@CarcareenaDetailing thanks
@shatgeri
@shatgeri 4 года назад
Is the broken part inside?
@shatgeri
@shatgeri 4 года назад
plastic piece fell inside. Is it a problem ?
@nick2286
@nick2286 2 года назад
friend , is it polo very easy faulty . if i want buy 2016 above year
@CarcareenaDetailing
@CarcareenaDetailing 2 года назад
This one is the CBU 1.2 tsi . 2016 one is it still 1.2 tsi or 1.6CKD one? If 1.2tsi Im not sure if i can give good advise. If you ask me if I regret buying this (brand new), i say no.
@nick2286
@nick2286 2 года назад
@@CarcareenaDetailing 1.6 and 1.2 which easy handle. sorry friend newbie. i decide retired buy one polo. currently i use smart 44 2006
@CarcareenaDetailing
@CarcareenaDetailing 2 года назад
@@nick2286 1.6 one is more basic i think probably more reliable. The 1.2 more complex with turbo and dsg. But more fun. Thats why i enjoyed the ownership despite some issues along the way.
@nick2286
@nick2286 2 года назад
@@CarcareenaDetailing i see. currently where u get those spart part and doing service, at sc or thirty party workshop?
@CarcareenaDetailing
@CarcareenaDetailing 2 года назад
@@nick2286 this particular part i buy outside. Bay Brothers @ PJ. I sold the car now for another VW. And towards the end of the car ownership i send to Vw for regular service.
@catcousins4830
@catcousins4830 2 года назад
Where you find the part? I'm looking for this part almost one month cannot find it anywhere not locally and not on the net. All google search i got the another part just the valve. I didnt find the complete part anywhere! Just in the company very very expensive. Hopefully you see this post and you still have the adress where you but it. Thank you anyway this video was very usefull.
@CarcareenaDetailing
@CarcareenaDetailing 2 года назад
Hi, i bought it from Bay Brother’s Petaling Jaya. Slightly cheaper than from VW. But not cheap if i recall RM400-500. You can provide the part number shown at 2:04 these parts shop can find it for you.
@catcousins4830
@catcousins4830 2 года назад
@@CarcareenaDetailing wow what a fast answer. Thanks man. 👨
@Kecepper
@Kecepper 2 года назад
Klau bnde nie bocor mmg engine barai trok ke xleh bwak 40km je lpas dan lah gi bngkel
@CarcareenaDetailing
@CarcareenaDetailing 2 года назад
Kereta saya jalan je. Cuma ada warning light dan power cut. Kadang2 tak ada pon powercut
@eugp4198
@eugp4198 4 года назад
Initially I don't know what it was when VW SC send me the photo of the broken PCV pipe.. but I get them to change for RM580.. now I have a better picture what the PCV is for after watching your video 👍.. I think rm500 plus is reasonable?
@CarcareenaDetailing
@CarcareenaDetailing 4 года назад
Reasonable?. Well when i first gladly found out the broken piece, I thought ahhh its just some plastic valve must be cheap. I am absolutely wrong. It comes with the hose attach to it and all. Still expensive tho.
@eugp4198
@eugp4198 4 года назад
@@CarcareenaDetailing ya... I thought they only need to change the broken part.. but the hose comes together as a whole unit and need to pay for the whole thing..😣
@eugp4198
@eugp4198 4 года назад
@@CarcareenaDetailing I just did a tracing of the hose and it seems the PCV and EVAP are joined together and fed into the air intake just before the turbo, Correct me if I am wrong.. if that so our turbo must be super oily and dirty... I just did the walnut blast on my intake valves 😓
@CarcareenaDetailing
@CarcareenaDetailing 4 года назад
I beleive so that could be. Then you should check your throttle body intake. If oily and gunk you should clean it with throttle body cleaner.
@eugp4198
@eugp4198 4 года назад
@@CarcareenaDetailing yup.. throttle body was cleaned up too 😊
@stuccogarage4x4
@stuccogarage4x4 2 года назад
MCM ni kalau patah blh start ke X??
@CarcareenaDetailing
@CarcareenaDetailing 2 года назад
Boleh. Kereta hidup dan jalan je. Cuma selalu naik check light.
@osvaldodejesuszompaestrada3611
@osvaldodejesuszompaestrada3611 2 года назад
Dónde la compraste
@muhammadhakimi2989
@muhammadhakimi2989 2 года назад
Assalamualaikum boss..berapa boss beli tuu..saya ada problem yg sama
@CarcareenaDetailing
@CarcareenaDetailing 2 года назад
Alamak saya tak dapat recall dah lama. Maybe range RM300-500. Tak murah jugak benda tu. Mmg datang seketul tak boleh remove yg plastik patah tu. Beli kat lua murah sikit dari VW.
@amutalib3509
@amutalib3509 4 года назад
Paip yang patah tu jatuh dalam enjin ke bang?
@CarcareenaDetailing
@CarcareenaDetailing 4 года назад
Mcmtu lah agaknya. Tapi kerata pakai few months takde masalah apa2. Benda tu plastik mungkin senang hancur dan akan sangkut kat oil filter.
@yellowmellow4035
@yellowmellow4035 3 года назад
Laa.. Melayu rupanya
@imwainam5659
@imwainam5659 4 года назад
Is the epc light came up too?
@CarcareenaDetailing
@CarcareenaDetailing 4 года назад
Not for that time. Try clean the throttle body intake.
@imwainam5659
@imwainam5659 4 года назад
@@CarcareenaDetailing ok tq... Mine came epc light with code p0222 😨
@azharm9503
@azharm9503 Год назад
Here's my view on vw, polo, golf, jetta and all, DONT BUY, infact dont even use it if they gives you free. I have a mercedes ml320, 300s, Cherokee 4.0, isuzu, Chevrolet, Perodua Kembara, some for 20 years and NONE, never had these expensive problem occuring like daily, constantly problematic lights came on. I have spent more than 10k on this useless 2010 polo 1.2tsi since I bought it 3 months ago. And I bought it for 24k. Imagine the repair cost, and that is using 2nd hand or re- parts. A re-cond mecha cost me more than 4k( a new is like close to 10k). After watching the parts in the mecha on youtube, it maybe cost like 300 ringgit, just a few solenoids, a small motor and some circuits. My ml 320 had the same problem and was on limb mode due to a lost rubber bush in the shift padle and after changing all the solenoids, 6 liters of transmission oil, less than a thousand inclusive labor. I had never spent more than 1k of repair on any of my vehicles since 1 started driving in 1980. This is a sad era where manufacturers produces products to make money for them and vw is among the worse. All I hear from vw owners are costly repairs... Dont buy this shit.
@yellowmellow4035
@yellowmellow4035 3 года назад
Mana nak beli? Susah betul nak cari benda ni
@CarcareenaDetailing
@CarcareenaDetailing 3 года назад
Aku beli kat Bay Brothers Auto, PJ. Parts shop. Diorang boleh dapatkan. Harga murah sikit dari VW.
@yellowmellow4035
@yellowmellow4035 3 года назад
@@CarcareenaDetailing thank bro
@ElJar8
@ElJar8 Год назад
num of part?
@CarcareenaDetailing
@CarcareenaDetailing Год назад
In the video i showed
@ElJar8
@ElJar8 Год назад
Thanks , good video. From mexico.
@CarcareenaDetailing
@CarcareenaDetailing Год назад
Thank you!
@izanolkamil6535
@izanolkamil6535 4 года назад
Mana nak cari bang barang tu?
@CarcareenaDetailing
@CarcareenaDetailing 4 года назад
Izanol Kamil bole cari kat dealer VW parts. Saya dapat dari Bay Brothers, PJ.
@izanolkamil6535
@izanolkamil6535 4 года назад
Haniff Rahman thank u bang...memang kene beli satu set PCV valve tu ye. Harga dlm berapa tu bang?
@CarcareenaDetailing
@CarcareenaDetailing 4 года назад
Izanol Kamil satu ketul tu satu part number. Kene tuka seketul unless nak diy tak sure nak dapat barang dari mana. Boleh try eBay. Rm500 camtu. Taktau kenapa dia mahal sgt.
@izanolkamil6535
@izanolkamil6535 4 года назад
Haniff Rahman baik bang 👍🏻
Далее
Volkswagen TSI Engine (1.2 L 105 PS / 77 kW)
8:12
Просмотров 319 тыс.
Skoda Yeti 1. 2 TSI PCV one way valve replacement
7:48
EGR Valve Cleaning - Volkswagen Polo Mark 4
19:36
Просмотров 22 тыс.
SYMPTOMS OF A STUCK OPEN PCV VALVE
3:06
Просмотров 446 тыс.
Tsi cold misfires explained
20:09
Просмотров 354 тыс.
Wastegate actuator - test
2:09
Просмотров 73 тыс.