Volvo 940 Rear Brake Replacement - Increase Stopping Power (740, 960) 

2:52 , Thats why you are supposed to release the e-brake tension adjuster in the center console first, before you remove the rotor.

Excellent video. I believe the anti-rattle clip was placed in upside down. For all of your time and effort, thank you very much.

Thanks very much. I've got to do just this in my '92 940 this week...

Super helpful. Thank you.

You put the clip in the wrong way, please inform people of this so that they don't do it wrong either. Just google up some images and you will see.

Before installing brake shoes on these Volvos, Make sure that you loosen the adjuster at the level in the interior (behind the ash tray in the back) almost all the way. Not only will this make installing easier, but if the level adjuster is too tight, you will not be able to get a good braking force on both wheels.. (been there, done that..)

Thank you so much for this video

The most neglected parts of most cars, rear brakes, so refreshing to see some serious investment on this car.

Great video. Thank you. I have a 1987 760 turbo.

I think the metal clip is upside down at 9:25. Otherwise great video!

Would these instructions also apply to a 960? I need to install new shoes for my parking/emergency brake. It's adjusted all the way.

I noticed the e-brake shoes were not adjusted or the rotor not even turned to check the shoes drum clearance.

Showhow to replace allthe bushing in the tyrailing arms & the Torque rod..

Can u help me, I have a 940 base volvo wagon, the mechanic didn't put the preheat hose back on, never said anything about the air box thermostat etc, I think they should have just replaced the preheat hose, without it their is a lot of extra hot air in the engine compartment, also the holes are just open, if the thermostat in the air box is confused due to no preheat hose what happens they didn't even mention the air box thermostat so I don't know if it works now, also they never cleaned my MAF, it was corroded at connections they didn't know how to check the obd codes so I figured it out and cleaned the MAF sensor which completely has improved my idle which was too high all the time esp in park or neutral . Thank you

Is this the same on a 95 volvo 940 base wagon

новые оригинальные запчасти,это есть хорошо

Volvos should be SAE, eh? So 9/16 should be correct. Just found out last night if you find a way to depress the brake pedal roughly 1/2'', it shuts off any leakage from lines. Cool eh?

Do the 13mm bolts to hold the new caliper in place need to be new (not previously used) bolts? Thank you, Martin.

Interesting: the bolts that hold the calipers on my '90 Volvo are 17 mm. Goes to my theory that Volvo knew for years they were going to sell their car division, and started compromising the design to better fit the way other cars were made.

what are you spraying at 3:16?

you didnt copper grease anything

Your gloves looks really big and useless