Volvo D13 with VEB Overhead Valve Adjustment 

Absolutely one of the most informative channels I've used. Thank you so much

Fantastic video. I really enjoyed it. Hope to see more soon.

Отличный английский, если бы не музыка фоном, даже не подумал бы, что наши люди)))) Спасибо, а я тут собрался рено магнум покупать, с двигателем вольво, у рено он называется DXi 13, смотрю интернет по вопросу болячек. В русском интернете ничего путевого нет, только про ящички и кроватки)))), полез в англоязычный. а тут ваш канал. Спасибо, удачи вам!

I appreciate the way you made the video. You did good explaining. This videos has given me the best idea of what an overhead consists of.

great video, would love to see video on replacing doser valve

Really so much good and informative vedio.learnt a lot

Again, great vid. I won't dare do this, but I know who to go to, if I need it done. Thx.

thank you so much, I only have one question, when do we start turning four flats on the injector rocker arm?? thank you again

Very nice explanation great video.

Nice video. Good job!

Great video, good Info. Thanks

Love ur vids bro...really helpful

a very good video thank you so much i hope to see more good luck

Thanks this was very helpful

Thank you for the video. I take it this is a 2011-2012 engine... 🤔 I have a 2015 and I'm having issues adjusting the rollers. I don't have the shims in mine. Can you explain how to adjust a new model?

Do you have video how to ajust valve,injector and brake

Good video!!

Is it necessary to change the injectors cups when changing the injectors

Great video, very instructive. question got D13 Passing coolant into the oil. Check head and head gasket with block tester and no problem, checked erg coolant and all dry. did a coolant pressure test with no leaks anywhere but coolant disappears and finally did an oil sample test and came back 0.83% coolant in the oil. I been told this could be due to bad injector cups. do i have to replace the injectors or reprogram after replacing the cups?

Can you please let us know how to remain Turbo Charger with new kit Volvo D13, (2012- 2017)

Could you make the same videos you made for the D13? Please make videos for D12D injector cups, injectors, rockerarm torque and overhead valve adjustment? Or at least maybe state difference in valve clearances, if similar?

Can you make videos how to replace cylinder head gasket for D13 Volvo

Lovely video

great Info thank you for your time. one question do I have to adjust the overhead right after I change seals on injectors

At the minute 7:30 are you using two .5 mm gauges to set at 1mm??

Is it ok if youre not adjusting both inlet/exhaust at the same time? Im confuse.. why is it inlet in number four piston and exhaust in number five..

Thanks grate video..

Would a fluctuating rpm gauge, that flutters 100 rpm at idle indicate need for a valve adjustment? My engine seems to kind of flutter at idle and under loads going up hill. Shop can't find any bad injector or bad injector cup. It's a 13 volvo D13 with VEB.

Thanks you so much

If you have a chance can you please either make a video about newer d13 or just share a camshaft marks below this coment. I appreciate!

Thanks so much!!!

thank you bud

Can you check top set adjustment with Premium Tech Tool? BTW Very informative video. Thanks.

Que medida de laina utilizaste para calibrar

Injector cup o-rings ,could you use NON- petroleum grease like silicone di-electriic grease that can be bought at Napa or Wal Mart , silicone won't swell o-rings, correct? Very good video , now I know exactly what cups and rocker shims are.

Did he ever mention what the intake clearance was ?

can you explain a little more about the shims and how to determining the thikness that i need on each valve ?and how do you do the math because i am confuse thank you

Have 2 further questions 1: can engine be turned without turning tool 2:which cylinder 1 or cylinder 4 to start adjusting valve clearance as in the video

Do you have to run/pre-adjust the overhead to proper clearances before you replace the injector cups/injectors, so that when you put the rockers arms back on you will already have the proper clearances set ahead of time before the removal of the cups/injectors?

Thanks for your video mate, you gave me confidence to tuneup my truck by myself:)))) I've got 2003 D12D 500hp with turbo compound.I just wondering if the process is the same on my one like the one on your video and what is the measurement for my one please.Thanks again

Hey is this the same for thee D12C engines

Do you reset the overhead adjustment everytime the rocker shaft is removed even if every part goes back in the same place, say for instance when changing one injector can you just adjust that cylinder or is it a better idea to just do all 6. The engine I'm working on had the overhead adjustment done maybe a month ago.

Question: [ I'm building compression or exceesive pressure in the coolant reservoir pushing coolant into the overflow side which normally stays empty (yes I tested coolant for combustion gases and gases are present in coolant) no diesel in the oil, no carbon in the coolant. Only excessive pressure gases in coolant.] Question: Is it most likely the cups? head gasket? Or cracked head? [ Loses about a gallon of coolant per hour out the overflow, only when driving but it's not going out the EGR into the exhaust! ] Is it the injector cups? (D12 motor 2005 volvo vn780) Thank you for all of the awesome videos and information.

Thank you for the video 👍👍👍 I have vibration when the engine brake in position #3 and RPM between 1200 and 1500 (turbo pressure about 25psi) I just have done with overhead but still the same problem. I have noticed on video the engine brake valve look like new. What you think can that engine brake valve cause that problem? Thank you very much

You are good

is it not 3.6 +-.10mm?

Currently doing an in frame on a Mack MP8 and started adjusting the valves today. My question is direction of normal engine rotation. Following the manual, I start at Cylinder #5. but they stress to rotate the engine in normal operation direction. DO NOT ROTATE BACKWARDS. From the flywheel looking towards the front of the truck, Im rotating the crank in a counter clockwise direction, which makes sense because the next cylinder marks that come next on the camshaft correspond to the cylinder order they tell you to adjust to, But it looks like other peoples videos are rotating in the opposite direction. from the alternator with a 24mm socket, you can only rotate the engine one way or else the pulley slips on the belt. Am I going the right way ?

Nice

What size or number is on the shim?? It’s blurry you can’t see

How about for the d12d

Can i get this VEB Shim Kit elswhere than a VOLVO dealer and how much does it cost at a dealer if thats the only place? Tbank You

Volvo excavitor ec210b engine overal engine vedio

Hi mate do u have a video like this for the FM9 without veb, 2003 is the vehicle I’m working on, cheers

Please how much tappets size Volvo fm 400

Do you have to run a full overhead if you do injectors and cups on a d13

How do you no thier going wrong

Hi there is this a euro5 or6 engine

The intake valve shim size???

Je suis au Mali. Un bon moteur volvo a40f

Как попасть к вам на tune up?

Please give me injector clearance on a Volvo tad 1642

Купил трак с нуля регулировку не делал еще на счетчике уже 150 тищ миль вопрос такой делать надо регировку или не обязательно ? Спасибо

you did not mention the torque of the injector if you change it,.i want to know how much the injector bolt.

What is the adjustmentt of the Jake brake

Hi can I make an appointment.

How much does it cost at dealer?

Please can you give the valve clearance for Volvo penta 1640ge

sir I need volvo d13 truk service manual

Nice video, BUT😜 I noticed that every Canadian shop have a Russian or Ucranian with loud Russian music all day long, same as ours 🤣

please state the valve clearance for the D13 VEB Plus engine

Minut 8:20 Dan Balan, Moldovian Singer 😁✌

I'm a Volvo truck mechanic

👍👍

boss how much the torque of the injector bolt in n-m?thank you

what is the torque spec on oil leaf spring after adjustment is done?

How often do I need to adjust overhead valves?

Здорово чувак! Ты где на механика учился?

Fm 400 2012 model

I had the injectors replaced on a d13 2012 Volvo at a volvo dealership and now the engine brake does not seem to be working. Dealer refuses to check it What can I check for?

If I hear a ticking sound from my engine with 740k m on it, is that from this?

How many hours it takes for adjusting valves at d13? And how much can cost to do this at a dealer ?

Does anyone have the torque for camshaft gear is it 35lbs + 90*

Where is located your shop?

Hey thanks so much for this info. I just pulled the valve cover off of my 2014 D11. The markings on the camshaft are different and there are not any engine brake rockers. Are you familiar with the D11 and what the markings mean? I would send you a pic via email or something but don't know how to do that via RU-vid. Happy Fourth!

Hay a guy that speaks English

"injector- handtight plus 4 flats" . Do you mean full turn 360°?

You didn’t show the feeler gauge size for the intake adjustment

im in atlanta refer me to someone down here please

Can you tell me what the labor time is for complete job

Those clearances seem pretty loose. Obviously you cant feel the resistance by watching it but it looks like there is no resistance at all on those feeler gauges. Should have some resistance ideally. When loosening the exhaust bridge shim hold down bolt, use a spanner to hold the bridge when cracking the nut beacuse on occasion its possible to snap the pin. Nice work though, interesting way of winding the engine over. An easy way is to use the correct tool and a ratchet strap on a bar and ratchet the bar on the tool from outside the truck whilst watching the cam markings.

That's what I am confused

I’d let you work on my truck anytime. How much does your shop charge for a Volvo d13 2013 injectors replacement with cups

ASLAM ALIKOM, Chokraen AL tufserati Miqneicue Camione. 🚛🚛👍... 🖐️.

What’s the intake side spec

All good until the dam alternator nut starts backing off...but good video.

i heard viagra song in background )

The clearance for Exhaust valve valve is 0.039. You subtracted 0.20 from 0.39 on Cylinder 1. You got the right clearance 2.5mm shim but you said the wrong numbers, and you showed the wrong numbers.

Делайте видео на русском языке