WARNING: Widebody Kits 

Just a heads up if you're looking into these widebody kits! No regrets on my end doing it, just know what you're getting into.

An electric car will NEVER be able to give me goosebumps like this!!!!

Same problem on my 2018 Daytona. No regrets love the kit. The look is totally bad ass. Exact same as yours with 305 35 r20s. I actually had to trim up the flares on the inside lip along with the flare themselves. Also the 2 sided foam tape doesn't hold well and I had to use some high quality epoxy based glue. Mine still lightly rubs on bumps. Some further trimming and gluing. Possibly needing to come up with some type of push in clip fastening system.

I love v8s so much, it doesnt matter if youre de-badged, by your exhaust note i know if its a 5.7, 6.4, or a 6.2. 5.7 weirdly enough has a deeper tone than 6.4 or 6.2. It sounds great

Long time sub of the channel here. Keep doing what you doin' bruh! Here are a couple of options to consider.... Installing coilovers with custom spring rates to control the suspension better or undersizing the tire like y'all mentioned AND installing bags. Airlift has a bad ass bolt-on kit for our cars. I'm personally looking into replacing my BC coilovers with a bag kit on my 300C.

Bro u the only channel that’s telling the real about our wide body kite. It’s my from right side

Been looking at swapping my magnum front end for one of these somewhere down the road. I have 22's on it so I may not now! Man that car sounded really good!!! Nice cars!

I refuse to put money into a R/T. Only Scats, Cats and Demons. Tbh it’s just me but actually to be truthful it’s just Cats and Demons. Not dumping $30k into a Scatpack. My hellcat is here to stay. I’ll buy another one but this one is here to stay. I’m going to buy another Hellcat in 2024. Once they realize nobody buying those Hellcats at $110k MSRP with Dealer markup $30k. So out the door $140k for a vehicle worth $110k. However, once you title it or drive it off the car lot after buying it it’s lost 30% of its value right off top, it’s no longer a new car. So say worth $80k the next day as a buyback. Dealer can resell it used for about $95k-100k imagine loosing $50k soon as you buy it. But never sell it then it doesn’t matter unless you total it. If someone hits you and it totals then you are out the $30k. Look guys, this ain’t for the faint of heart. U need money to play.

Since you're planning on running her next summer I'd agree with keeping the 35s. Even though it resolves the widebody problem overall it reduces the diameter by 1.25 -1.35". That'll create a launch issue without, redoing suspension. Stay safe bro, and try to keep out of those dips and holes.

That lady in the background with the baby all passed after thay loud Rev haha 😄

Make sure once you get that fender flare fixed you re-align it. Theyre pretty durable. I sent mine airborne a few times. Still got the dent in the headliner from my dome smacking it. Sunroof is a curse 🤣

Low pros give you a harsher ride. Just run a tire with a bit of a stretch and ditch the fender liners. I've heard of people taking a heat gun to fender liners and molding it to clear tires. Another thing you can do is run a tad bit of camber. Something tolerable for those cars. If you don't have a set of those adjustable upper control arms by Specialty Products by now, get on it! If you run a decent set of suspension, you can adjust damper to prevent bottoming out.

What makes it different from the OEM fender flares and the aftermarket ones? I have a HC NB but aren't the suspension the same?

Do you think I would have a problem running stock tires for the moment being with the kit installed?

Good Video Bro!!!! I put same kit on my 2020 GT. Yes... I said GT. No issues so far because of suspension difference.

Shirokai body kit for the charger is insane and wow

Did full vicrez...all clipped portions held up, but rear tops couldn't hold on just 3m. Had to rivnut em. 1 front broke from road debris, so ended up going with lions kit fronts screw mounted. Much happier.

Sold my scatpack but I'll still be watching all your videos and your progress! Wanna hear the cool part?? My long term girlfriend bought it from me 😍 she did her first couple little burnouts today. I'm so proud 🥺

where did he get his wheels? I tried to get som from vicrez for the widebody but they been on back order for a while now..

I have a 2022 challenger, RT/TA, looking to do a widebody kit, anybody in Texas, the Houston area know any good places to have it done?

U can solve the problem by getting the oem fender and flares, the are compatible with after market front bumper. I Never have that flare issue since I put the oem fenders on. But the fenders do cost alot tho, bout $500 each

Had my fenders cut when I had my Chrome/Carbon WB installed, it’s 17 RT Scatpack Charger. Initially I had it lowered on H&R, it was extremely low to the point I hit a deep dip in the road & damaged my front & rear bumper. I went back OEM, riding on 285/40 & 315/35 Atturo 850 tires and never had any sort of rubbing, it’s been close to a year now. If I would’ve never cut the fenders I’d be up shyt creek

That thing sounds ridiculous! Awesome!

The factory-wide bodies are expensive because they have to cut the fenders. You can't just half-ass it. Do it right and you will not have any issues.

Lower profile tires KILLS the look for me, that would be a no-go as an option but to each his own!

I guess I’m old-school I like the narrow body that’s what I grew up with but I gotta tell you that car sound mean that is a true straight pipe 😁👍

That is one nasty Charger. Love it!!!! Loud too. Guessing the cops rolled in and said tone it down LOL.

That hood is awesome. What kind of hood is it?

R/T life can you do a vid on theft and how to deter. Using the kill switch and metal plate they install by the shifter.

I put a widebody kit on my charger hellcat too.. At frist I tried 3m tape that came with the kit but it didn't hold properly after a couple pulls lol. Im currently using an adhesive and overall it looks good, just have to adjust the flare on the driver side fender like his. Going to switch to a bracket though, i don't want to cut the fenders.

1:37 so thought RT was road and track, is there a RT and RT Road&Track?

I just got my 10.5 and 305 in today for my 5.7. Installing tomorrow morning. was thinking about a widebody kit too. Also not sure if I'll fit into the car wash anymore lol

Been seeing a lot of the wide body flares pop off if they aren't apart of the fender mold. Yikes. Great video bro! As always. Looking good.

I wouldn't use adhesive on flares at all, I would use a bracket or drill into fender for rivets or some kind of locking nut.

So dope!!! Gotta work on those bleeps 🤣🤣🤣

OMG THAT EXHAUST!!! So only a flame tune and a true straight pipe??? I need this in my life ASAP, please let me know which tune he grabbed and how he got that rev limiter removed

Not gonna lie that’s a dope color!

You have to cut and also use adhesive

Been thinking about doing this to my R/T…Does this kit just bolt on to the existing body panels or how does it work?

That’s why you should go to the wide-body factory from the jump.

Nice vid.👍

that tan Charger is an R/T??? From the exhaust I thought it was a 6.2, goddam😂😂😂

Bro I want to cut into my flares! Is there any video you can recommend. The bracket from Vicrez that holds the flare broke bc of the rubbing. I’m located on Long Island and I’d appreciate the help. How much did you cut into your car and specifically where and how did it hold without the bracket there

Does it have muffler delete

I’m on D2 racing lowering springs.

Good things comes to those who wait? Dodge is offering widebody kits with warranties. No one seems to be reviewing/talking about them though?

I got the AVS wide body kid for my challenger and I regret it! I’m over in Miami and would love to meet with you and show my problems

I decided to skip the widebody kit because of issues like this and because there's no way I'm cutting into the fenders. It looks incredible, but I just don't want to mess with the drivability of the car. Vicrez sells a 2020 front/rear conversion kit for narrow body's now - basically the new model look without the fender flares. So I'm seriously thinking of going that route.

That car sounds amazing. This is something that the current generation of EV pushers doesn't understand.

i want his tann rt i want mine that color asap

Which coil overs are you going with

What hood??

I’m just gonna redo it and go oem cause mine is bad at this point

Some one stolen my wide body kit rear right

It cost more in the long run. Id advise just buying the widebody 392

Man Ive had a lot of different wheel/tire set ups on a lot of different cars and maybe im just getting old but I would never, ever have anything thinner then a 30 series tire on any street car, and really 35 is prefered but thats just me.

i love it bro

Worst case scenario just re adhesive it or get another kit. You pay to play with mods like this i suppose. Iv notices it doesnt seem to be as much of an issue on Challengers at least from what I've read it seems most people have the issues on the Chargers for whatever reason.

If you cut the fenders for clearance there would be no rubbing I’m sure it’s hitting the actual fender and causing the issue!

🫣OMFG🙉 Sounds like a MONSTER. Me likey😍

Awesome, great to hear. Lol

Gotta cut the inside of the fender, don’t change the suspension you’re sacrificing a comfortable ride for a little bit of rubbing that can be fixed with just cutting unnecessary stuff under the fender

I like he stroker better but to each their own. Both are a quite too loud for me.

All three of these cars look pretty clapped out with every Autozone accessory you can buy. #moparsnotthesecars

I miss the old videos all this posting of cars that are not even coming out is no bueno

Yea all in the install if you do it right the first time won’t ever come off I had a issue with the fiat install caused I used the wrong products and didn’t install the clips on the fenders that I added on

Dodge did cut the fenders for a reason…they did this even without lowering the suspension further than the narrow bodies.

Also why not buy the factory front fenders lol then u won’t have any hassle what so ever

That maybe be too loud.

Cuttin into the fenders is a good option but man it’s too risky for me Yeah suspension coil overs are probably the best options

Best part You can drive it longer then 2 hours And once she drinks that petro 5 minute top off and back to slashing tires or u can go wait for three hours to charge. V84LIFE

There’s nothing like the factory originals. ☹️☹️☹️

Does his car have that stupid cackle tune?

Debadge it so they don’t know you’re driving a slow car. Great tactics 👍

LOL you must hate your car at least the transmission, the rev is quite much. That hood is sick though.

Just buy OEM widebody fenders.

Just cut the cars fellas, and call it good. I did mine, I never have these issues.

Cut the fender like a wide body vehicles demands

If you’re not cutting your fenders then get used to it

Lee press on widebody kit isn't it. Gotta be oem or at least cut fenders like oem and fasteners. Get what ya pay for.

Just buy a hellcat widebody stop playing

First!

Tan car sounds like shit.

That car sounds like garbage!