WATCH THIS Before Buying KW Coilovers

Подписаться 47 тыс.

Просмотров 13 тыс.

50% 1

Here's why I made the switch to $300 springs from my coilover kit and you should too!
Wheel Discount: rexracingwheels.com/discount/...
- Use code "vroomfreeship" for free shipping
KW DDC: bit.ly/30PQbOf
Vorshlag Camber Plates: bit.ly/3DM0Nwn
Passthrough Sockets: amzn.to/3xldtrB
Spindle Spreader: amzn.to/3xlpSM5
Hex Sockets: amzn.to/3LErc47
PB Blaster: amzn.to/32xd7mc
Chrome Sockets: Socket Set: amzn.to/3GhlDFM
Sockets: amzn.to/3EV4K3e
Impact Wrench: amzn.to/38slu5q
High Speed Ratchet: amzn.to/3Knb0l4
Thanks for tuning in. If you are looking for a complete tool kit as well as video gear hit the links below.
Tool Kit: kit.co/fritzramos/bmw-mechani...
Video Gear: kit.co/fritzramos/filming-gear
If you are looking to get started on RU-vid, consider Tube buddy as it has helped me out a great deal. Try it out for free: www.tubebuddy.com/financialfi...
Some of the above links are affiliate links. By using them you help support the channel at no additional cost to you. Thank you for your support.
00:00 WHY?!
01:00 Remove the covers and braces
01:43 Remove the Old Spring
03:01 Clean & Prep the Strut
03:14 Vorshlag Camber Plates
04:23 Swift vs KW
04:37 Installing the lowering springs
07:00 WARNING!
07:28 Why Swift Springs???
08:38 Dialing in Preload & Initial Height
09:29 Strut Brace and Cover Install
10:06 Final Adjustments
10:38 Initial Impressions
10:52 Measurements

Авто/Мото

Опубликовано:

3 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@8teate 11 месяцев назад

I have said it before. This guy is making the best content for our F22.

@LuisGM94 11 месяцев назад

absolutely

@FritzRamos 11 месяцев назад

Thank yo . I appreciate that!

@StereoSoundAgent 8 месяцев назад

Your content is therapeutic, so much work went into this video alone!

@fresnoar3084 11 месяцев назад

Glad you still have this car!

@FritzRamos 11 месяцев назад

Me too!

@acroracing 11 месяцев назад

Thank you for the post. This is greatly informative.

@FritzRamos 11 месяцев назад

Thank you. Glad it was helpful!

@andrxito 11 месяцев назад

Quality tutorial as always :) Great job! In Germany taking care of the brake cooling on these is becoming quite popular, the rear inner side of the disc tends to heat up a lot! The blue brakes end up green after some track punishment. you might wanna look into that!

@FritzRamos 11 месяцев назад

Thank you. I'll look into it!

@Vorshlag 11 месяцев назад

Nice video! Great production and instructional value. Just wanted to point out that the sealed radial bearing upper perches we provide will isolate spring rotation during compression. So the thrust washers in each spring in your stack-up might be redundant? But it can't hurt. Cheers!

@FritzRamos 11 месяцев назад

Thanks for sharing that and for making such an awesome camber plate!

@lOl-dv1vc 11 месяцев назад

Hey fritz could you please do a n55 wastegate actuator replacement video pls?

@benrodriguez9016 5 месяцев назад

At this point why not get the BC racing coilovers with swift springs?

@Gchild-mos0311 2 месяца назад

So the kw was only a problem with the tire change you made? I wanted an upgraded coilovers and was looking at the v2 with edc and didn’t plan to change tire setup. Will I have same problem

@marcelcreese7657 11 месяцев назад

Hey Fritz can you point me in the right direction I am looking for all info on valve cover gasket replacement do’s and don’t including eccentric shaft sensor I plan doing the work myself. I greatly appreciate your channel I have learned more about bmw through your videos

@goc_yt 3 месяца назад

I want to do the same for my KW V3 on my F20, because default springs are way too soft for me. I was chatting with KW and they recommend to not to go more then 20N/mm more then default spring rate of 2041 because the damper will lose its harmonizing properties. And here I see that you went from 4kg to 8kg of spring rate which is around 40N/mm more then default. How does the car feels on agressive ride, did you lose your rebound adjustment or did you notice any other side effect maybe?

@tommyz6784 11 месяцев назад

I have a stupid question about the hood, will it leak when it rains? Will there be any bad effects?

@Alex-cc3ol 9 месяцев назад

I recently installed KW DDC on my 2022 Zupra. It rubbs like crazy especially in the sharp corners. I was told by KW that I will damage the dampers if to try replacing those stock progressive springs. They suggested switching to Clubsports instead...

@FritzRamos 9 месяцев назад

Technically it would be out of warrant, but if you kept your old springs for the warranty pictures... As far as it getting damaged. If you calculate the stroke range of the damper and operate within that window you should be fine. In this case I am at the lowest KW recommended height with stiffer springs so it's within the normal tolerance The way it was explained to me by Sift and the team at SV BImmer is: it would be more accurate to say that they have not been tested with these springs and if you operate it out of the recommended stroke range then that can cause damage. However, mine are fins so far. If you want you can email info@svbimmer.com and explain your situation and also let them know I recommended you. Hope that helps

@enriquewilliams9377 7 месяцев назад

@@FritzRamos I saw your video with the KW DDC , I decide to get them . mistake !!! too extremally soft and the ride height to low . at the same time I did get 245/40/18 square (robbing everywhere at the max ride height . after several upsetting conversation with KW support I did install Dinan spring with a little camber no robbing . frustrated with KW !!!! . had similar idea to add spring and helper and with your video really clear the problem with the ride height ( I might go with different spring rate 6 or 7 K) Thank you for the videos !!!

@FritzRamos 7 месяцев назад

@@enriquewilliams9377 I'm sorry to hear that. Try calling Swift, they were very helpful and patient with me. Hope it all works out for you.

@Kruse1 3 месяца назад

I wish STI videos were this good.

@kathyy5903 11 месяцев назад

Question bro,I got n55 as well should I do high pressure fuel pump before I install down pipes?

@FritzRamos 11 месяцев назад

Unless your pump is broken, downpipe

@c0udnineindustries 10 месяцев назад

Hi, My KW V3 Springs have fatigued on my F22. Do you have the link to where you got your swift spring setup? Thanks!

@FritzRamos 9 месяцев назад

email: info@svbimmer.com and if you want the exact same setup it's the vorshlag camber plates with the 60mm perches, 7in 8kg springs (for the front), 8in 14kg springs for the rear, as well as 2 sets or helper springs. Swift Part numbers are: Z60-178-080 Z60-203-140 H60-060-015 Let me know how it goes

@c0udnineindustries 9 месяцев назад

@@FritzRamos Awesome and thank you 🙏 super appreciate your reply!

@dang3402 11 месяцев назад

Fritz. I have off topic question.I have a question. I own a 2014 M235i. My friend owns a 2019 M240i x drive. He’s selling me his oem M performance muffler . Would it fit my car?

@FritzRamos 11 месяцев назад

I'm not sure. Cross reference the part number with www.realoem.com/

@jaigupta2770 11 месяцев назад

Hey Fritz, absolutely love the content on the f22; the best I've found. I am in the market for an m235i and saw this deal for 22k but it has 87k miles. Is this still a good deal? What have you heard about the n55 at these milages? I don't have experience working on cars but am a DIYer. Thanks!

@FritzRamos 11 месяцев назад

22k is a little high, but it depends on what has been done to it and what need to be done. Hope this helps ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OPY0-u0lBm4.html

@fresnoar3084 11 месяцев назад

Who makes you’r aluminum brace stress bar?

@FritzRamos 11 месяцев назад

It's OEM ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-py-0TzDh94s.html

@fresnoar3084 11 месяцев назад

@@FritzRamos really I didn’t know they come with one 😆

@fresnoar3084 11 месяцев назад

@@FritzRamos what about the carbon fiber brace? I know it’s out of an M2 or M3 right