What's wrong with "Charlie" the Dump Truck? BIG noisy problems! Cat C-12 International Truck.

Подписаться 255 тыс.

Просмотров 73 тыс.

50% 1

In this video we are working on Charlie the Dump Truck that was brought in with a knocking noise. Thanks to Kamikoto for sponsoring today's video! They are now running a Black Friday Sale Day Sale! Go to kamikoto.com/AdeptApe to get an additional $50 off on any purchase with code AdeptApe.
Cat C-12 engine and some weird noises. Thanks for watching. Winners of the prizes can email me at AdeptApe@yahoo.com.
Amazon Affiliate Links to recommended tools:
Airlift Cooling System Vacuum Filling System: amzn.to/3D9AlPu
Milwaukee 3/8" Right Angle Impact Wrench: amzn.to/3D2CvAk
2 Pack M12 Style Batteries for Milwaukee: amzn.to/3D2mdHE
Adjustable Height Parts Tray 100 lbs: amzn.to/3CBusZB
Engine Oil and Fuel Dye UV: amzn.to/3z34zkv
UV Professional Grade Light: amzn.to/3gzxPc0
Allstar Oil Pressure Prime Tank: amzn.to/3SPx4t5
Photo Tach REED: amzn.to/3ATJ8Cw

Авто/Мото

Опубликовано:

24 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 133

@AdeptApe Год назад

Thanks for watching the video. Congratulations to the winners and be sure to email me at AdeptApe@yahoo.com. Thanks to Kamikoto for sponsoring today's video! They are now running a Black Friday Sale Day Sale! Go to kamikoto.com/AdeptApe to get an additional $50 off on any purchase with code AdeptApe. Thanks to Kamikoto for sponsoring today's video!

@mikeznel6048 Год назад

So it got 14 plus miles to the gallon along with next to no idle time? Oh 300,000 miles. That’s a lot less than 1,000,000 miles.

@AgustinCesar Год назад

FYI, apparently Kamikoto seems to be found doing foul play, beware.

@schwabentutorials Год назад

Those knives are made from 420j2 steel.. literally the cheapest steel one could use for making a knive - be careful people, way overpriced those things could almost be called a scam at least the marketing is just very dodgy and misleading.

@slomotrainwreck Год назад

@@AgustinCesar I've heard the same about kamikoto

@splitsecondmagician Год назад

The intro cracked me up.

@kelvinrf Год назад

I'm glad to see you gave the guy a shout out for bringing it in rather than just keep driving it until she blows. 😂

@533watts Год назад

It's nice to be with a good carrier who cares about its drivers. Had a steak dinner with a slice of pie paid for by my carrier on Thanksgiving. Thanks combined transport!

@jaydunbar7538 Год назад

A friend of mine drives for them, he’s on the specialty fleet usually runs with a 9 axle rig.

@caveone-365 Год назад

Wow what a weird failure. I wasn't expecting to see the piston skirt all cracked and deteriorated with 'fossils' in the oil pan. Really wild. Such a strange way for it to break. I was expecting to see worn lobes on the cam and beat up lifters. It actually ran pretty good considering what happened to that piston. Thanks for sharing this Josh! Hope you had yourself a great Thanksgiving 👍👍🙂

@t1259sw Год назад

I worked for Zollner Piston in Fort Wayne Indiana before they we're bought out. From time to time I would have to go to the front office to visit the head of engineering and it was cool to see where field service techs would send him failed pistons. Navistar (IH) was their biggest customer, but was told that Fred Zollner (owner) started with tank pistons for the U.S. Military and those pistons made the Navistar pistons look like toys. Yes, Fred was the owner of Fort Wayne Pistons that are now called Detroit Pistons, one more history note when he died his secretary was willed the company. Nice troubleshooting video.

@4everdc302 Год назад

Destruction of the week in the spring. Frozen pressure washer left outside in the winter🤣still watching👍

@skee0310 Год назад

Hope everybody had a great Thanksgiving!

@keepontruckinoutlawlife1248 Год назад

You to bub

@LeewardStudios Год назад

Testament to the robustness of the block to swallow that much metal and keep running!

@mysock351C Год назад

Just an FYI the sponsor is part of a larger network of scam startups, most of which have failed. Up to you if you want to keep them, but know they are a front of some sort and might become radioactive at some point.

@valerieumphenour3565 4 месяца назад

Tennessee Tuxedo you’re the greatest.

@garrettboyle5892 Год назад

I've gone back through and overhauled a C12 where someone I believe left the wrist pin puck off completely. It was nowhere to be found and the pin destroyed the liner. There was a lot of strange things I found when I tore it apart. Definitely put the caps back on the wrist pins!

@markm0000 Год назад

Good that it's getting a rebuild because when something is out of balance in a spinning engine other parts are met with forces they weren't designed to handle. Also, having some kind of warranty on a engine that old is good peace of mind.

@martinthompson4462 Год назад

Forty odd years on the spanners and I have never seen that. You learn something every day

@raycollington4310 Год назад

Seeing the pads instead of snap rings in the piston pin reminds me that the British engine manufacturer L Gardner & Sons used the same arrangement albeit they were aluminium, in their engines from the mid-19th century at least. Might have been even earlier. Unusual to say the least but nothing new. Only engine brand I came across with this set-up. Great video, thank you from London UK

@bigfoot4515 Год назад

Diesel mechanics and producing RU-vid videos is your calling. Great video!

@williamyoder2033 Год назад

Great vid, certainly surprised that didn't go catastrophic!! Amazing content, and we all appreciate ya!

@haroldltatroii5952 Год назад

Haven't watched for a while. Back again your content is awesome. Thanks for all you do and Hope everyone had an awesome Thanksgiving!

@AdeptApe Год назад

Thank you.

@lignow9762 Год назад

Another good video. Thanks.

@knickebien1966 Год назад

8:36 just reading the tea leaves here: I see major repair in your future.

@randallyarborough7923 Год назад

Interesting and informative content as always.

@dhillonsavee Год назад

Hello Josh !!! HAPPY THANKSGIVING TO YOU ASWELL AND YOUR FAMILY....

@eoghanhennessy443 Год назад

Great mechanic mate love the video . Been at it while my self

@BobSmith-mc7uq Год назад

Good for the owner using common sense & getting the truck to the shop. Doesn't happen much these days!

@johncholmes643 Год назад

Lynden transport had a shitload of these these pulling 105,500 and within about 6months of each other those pin buttons failed and would window the blocks. The worst one was coming down cabbage on 84 in Idaho with the Jake's on, and he went a long time before he stopped. I couldn't believe what I saw when it came in but it windmilled #3 so bad the only thing holding the block together was the cylinder head, and the crankshaft.

@CraigArndt Год назад

Congratulations to RiverCity! I know zero about diesel engines, well, my son had an F350 6.0 and that I worked on, but nothing like these behemoths. Great video, I thought the knock was from a broken crank bearing in the sump, but the piston ring had me. Good stuff!

@jaydunbar7538 Год назад

Much of it’s the same, just a different size.

@howardmcadams3852 Год назад

Thanks Sir for Sharing this with us. We'll Done Sir

@columbo1966 Год назад

glad it didn't throw a rod while you listened for the knock!

@notyou6950 Год назад

I had this exact thing happen to my 6.2 Chevy diesel. I heard a bell ringing at idle after exiting the interstate. The last part of the skirt was still attached to the wrist pin but there was a lot of it missing altogether. Put a new cylinder and rings in it and it is still with me to this day.

@badgerpa9 Год назад

Skirt falling apart is not often a good thing. Hope Charlie gets better. Be safe.

@terryfrederickson2774 Год назад

ya know way back in diesel 101 class they tell ya don't use either to start your eng in cold weather,, it fractures the piston . a block heater of some kind works best

@markae0 Год назад

Three destruction of the week's in the video!

@theEpiphone247 Год назад

Love the blooper 🤣

@jamesgeorge4874 Год назад

"Hard water" season here in Michigan, too. But some days it's 50. Ya never know.

@jesustalamantes9007 Год назад

Man, I like this videos. Wish they were a bit longer

@philliprowell6588 Год назад

You make some pretty cool vids

@bigbellyrebuilds2778 Год назад

I hope Charlie will be ok

@Elementaliti Год назад

Poor Charlie 😿

@wagon9082 Год назад

Good video

@ahilltodieons Год назад

Hey Josh, learning a great deal from every video, contributing to that semi-complete Renaissance understanding of the mechanical world 👌 I don't own intend to own any Caterpillar engines, but, just out of curiosity for what the average operator has to contend with, what does a full rebuild on one of these four-cylinder engines cost? Thanks sensei, and keep it up!

@davidmashburn6890 Год назад

When I worked at Alaplex we had 20 freightliner with c12 and out of 20 we had seven of them that did the same thing

@alouisschafer7212 Год назад

Very unusual failure it looks like the piston skirt just cracked apart under normal operating conditions.

@JPTV3000 Год назад

I want to see a video on the big cam 400 and any and all information that you can pull things to know things to look out for when it comes to restoring running and maintaining older engines like the big cam 400 I will be waiting on this video

@Commysumngtus Год назад

Look up Pittsburg Power they’re big cam Cummins experts

@J.R.in_WV Год назад

I’m gonna do a blind guess that it’s a cam, cam follower, rocker or push tube related failure…..will update after the video Wow, I was way off on that one. On our C12’s we’ve never had a piston or bottom end issue beyond normal wear, it’s always been cam and valve train related….and there have been a LOT of instances of that. It seems like even using genuine CAT cams and followers we can’t get over 150,000 miles without one failing causing the other to fail, usually it seems like the rollers on the followers flatten out and grind into the cam lobes. With aftermarket PAI parts the lifetime is about the same but the cost is around half what the CAT parts are so it’s just more cost effective.

@winnreid Год назад

Pete 385 with c-12 310 650k on the clock slung rod threw side of block. Installed cat reman engine tuned 410hp at 670k on the clock hydro locked and dropped a valve. Did complete overhaul, coolant was the culprit it was having cavitation problems caused tiny holes in liner.

@candm9610 10 месяцев назад

If you don’t care for the intertrashional alarm I can promise you the Cat 420F2 backhoe with an after treatment fault will make you want to scream!! I’ve often wondered why we can’t turn the action alarms off in ET overdrive parameters so we can think..

@redbull8661 Год назад

I had a Baldwin filter spring a leak and scatter a motor. They assured me they had insurance for that and I was covered. Yeah, they never paid for it.

@jdhreiss 6 месяцев назад

Cat hat record holder!

@charfmander Год назад

Josh, could you drop a sleeve in the cylinder with a new piston/rings? I guess that would depend on how the crankshaft condition.

@SkrixFox Год назад

Awesome video, but the sponsor is junk. They use the lowest grade of steel possible and you have to go really digging through their site to find that they use 420J2 soft steel that does not hold onto an edge. Plus, the knives aren't made in Japan, they are made in China.

@misterhipster9509 Год назад

The amount of Cat parts I receive w/Made in China on the wrapper doesn't help me stay all yellow. Can't even get trad Cat yellow paint lately.

@MitzvosGolem1 Год назад

True ..I am furious and switched to Komatsu Japan made in Japan now. CAT sold out to Ccp China.

@279spirit Год назад

Seen one of your alls flatbed truck today on I-84 12-5-22

@MrFacepeel Год назад

Rod knock number 4 possible broken bolts that hold crankshaft at c5

@SuperSecretSquirell Год назад

I have a love/hate relationship with my magnetic pickups as well. Last week I dropped my screwdriver into a belly pan, while I was pulling it out the magnet decided to stick to the frame and knocked my screwdriver off into and even more inaccessible location. 🤬

@AdeptApe Год назад

That's unfortunate to hear, but magic like magnets have a mind of their own.

@SuperSecretSquirell Год назад

And to make it worse it was magnetic pocket screwdriver. Double magic!

@mtgwdefender Год назад

@@SuperSecretSquirell sorry to hear that. That is the main reason I stopped carrying little tools and pens on my work shirt pockets. It is uncomfortable when your are working with your chest against something and absolutely not worth it to drop something in the wrong place

@robertgarrett5009 Год назад

Arrggg... can't believe you jumped on the knife band wagon, they ask you to buy your square foot of Scotland yet. Fyi, these guys are based in Hong Kong.

@AdeptApe Год назад

They sent me the knives, I liked the knives. They are the sponsor of the video, so they are helping the channel. I need to do some research on them based on the comments I've been getting.

@peteengard9966 Год назад

Had a 3406B come in with a weird knock. Turned out to be a wrist pin missing the C clip and the wrist pin was carving a pair of grooves in the liner. This was a new engine still under warranty. You know that cat pays for bare minimum under warranty. Had to reuse bearings. The customer had to pay for oil and filter. Crazy.

@johngoldsmith6629 Год назад

Have seen the snap ring cut through the bottom of the piston. Cat then changed the design and made it wider. Warranty does not pay to make it new. If the oil and filter was contaminated they would have paid for it. I would have written the claim up finding metal in the oil filter from the grooves cut in the liner. Since cylinder pack failed Cat would have paid for one rod bearing as the other ones did not have to be removed. Warranty 101 class.

@jamesscott1932 Год назад

Well stated, John. The factory dealer I was at was like a watchful customer who didn’t trust anyone. Warranty claims were scrutinized.

@MrTurtlekid434 Год назад

first! love the vids Josh keep it up!

@belarus_black_smoke4753 Год назад

Outake👍😂

@jimgree Год назад

Piston buttons, I've been told lol

@terryfrederickson2774 Год назад

no I don't wash engines off at 20 deg either but I do have a 2ft blow gun and a vachume

@tylergambon6492 Год назад

Knock knock! Who's there? Cylinder 2

@nickayivor8432 Год назад

Knowledge thank you very much for sharing it My teacher Adept Ape PRODIGY Adept Ape From Nick Ayivor from London England UK 🇬🇧

@aigarslacis4433 Год назад

It seems you have a collection of "wireless" pistons, is that the new trend nowadays 😇

@ramblerclassicman221 Год назад

Red filter on a yellow engine, ketchup and mustard give me a squirt!

@keepontruckinoutlawlife1248 Год назад

What well happen if you mixed coolant together? Were are you located? HAPPY Thanksgiving

@bigred1247 Год назад

Ouhhh that's a broken piston skirt listen to it wow!

@ianatkinson8464 Год назад

😎👍

@OtherWorldExplorers Год назад

You sounded like Guilford Godfrey when you holland about the oil pressure.

@AdeptApe Год назад

I believe it's Gilbert.

@jerryhernandez96 Год назад

Almost close lol

@TheRebelOne. Год назад

5:45 a.m!! What time does your shift actually start and finish Josh?

@scrotiemcboogerballs1981 Год назад

Thanks for sharing it was so close to coming completely apart and opening up a new window in the block or pan lol

@methanial73 Год назад

It's got a knock? That's ALL diesels! Lol

@ArielJRodriguez Год назад

Now, did you rebuild the whole engine or just the piston that was damaged?

@diesellivesmatter Год назад

Your supposed to do price is right rules with number guessing, closest without going over.

@mattbrewer9487 Год назад

Charlie is a pizza fuggin chit,ese!!!

@BeezyKing99 Год назад

3:39- "hello!? anyone there, let me in!"

@floydwilliams3321 Год назад

300,000 miles bummer but it’s already needing a rebuild

@jeffbone5635 Год назад

What's your best advice for breaking in a fresh mxs 625hp I don't have access to a dino?

@Justin_Buser Год назад

There is a hole through my CAT 3126 oil pan. Does this mean I need to put more washer fluid in it

@jaydunbar7538 Год назад

Your right that filter doesn’t look right, i over filter my fuel for that exact reason they gota match lol

@manvsroad7691 Год назад

damn i was way off...thought it would have been an otr truck...

@ronniewilliz153 Год назад

The last company used Baldwin filters they never had a issue with them why don't you like them ?

@johngoldsmith6629 Год назад

When the first 3406E came out several trucks came in with low power. Fuel PSI was OK. Baldwin fuel filter was restricting the flow. Swapped out the filter on a chassis dyno and HP would jump up around fifty if I recall.

@johncraine9082 Год назад

It got the "Hemi tick" that's normal..

@popper2815 Год назад

Was it a MBL? I've seen two like that, one lived 😆

@johngoldsmith6629 Год назад

Bridge engine like the MBN. Smart waste gate, bad about cracking turbo's and exhaust manifolds if you don't reset the FLS / FTS and update the flash file.

@mikeznel6048 Год назад

Can’t do trucks with exhaust leaks.

@JacksonGuitarsPlayer03 Год назад

I see Any other filter on a CAT engine other than a CAT filter I’m gonna be mad wanting to throw it away. That beautiful new CAT colored filter it goes along with the motor and has the CAT logo on em. It just looks so damn good. Makes the engine run as intended because well it’s CAT on CAT. I’d say the same with Cummins. Cummins filters on Cummins engines. NAPA filters are not bad. That stupid crappy red filter on the CATs I see a lot I don’t like it either man

@murph55 Год назад

starting fluid ?

@juanfo7307 Год назад

I would have just put a new piston in

@dixiemae5042 Год назад

The DPF’s clogged 🤷🏻‍♂️🤦🏻‍♂️

@roberthale8407 Год назад

It's KaaaMeeKoeToe.

@rustypotatos Год назад

Wait! Why is the truck beeping like that?!

@tihspidtherekciltilc5469 Год назад

Knives and the title thing are a scam. Research them as they're the same Chinese company. You're welcome.

@amunderdog Год назад

300,000/ 70005 Gal = Oh My. 4.3 MPG ???????

@zombienectar Год назад

yellow and green should never be seen, except of course in the wash machine. ( in this case red )

@CngBng Год назад

334k gallons of fuel

@crusiethmaximuss Год назад

I wonder if it fractured due to heat or bein' hydrauliced into smithereens due to non-combustible fluid gettin' trapped in there some how... Hmm...

@davidellenbaum1229 Год назад

Ether shot

@moondogdieselworks3883 Год назад

I can definitely think of worse brands than Baldwin. Definitely not as good as cat but better than Fram.

@alanack67 Год назад

Baldwin is great for aftermarket. Obviously oem is usually the best. Fleetguard is my favorite

@Shaddowbanned Год назад

You wanna know what I think?

@maxwellchatman4800 Год назад

I’m going to guess 113,450 gallons of diesel

@vivillager Год назад

If anyone comes across this comment, I need help! I have a Cummins, starts up and idles fine. But when I step on the gas pedal, I've got nothing. Check Engine light came on and told me to replace the throttle position sensor. I did, and no change. I checked the wires between the TPS and the ECM, it's 6 wires about 12 inches long, and I don't see any chew marks. I unplugged both the TPS and ECM and checked for continuity from end to end. Ohmmeter read 0.0 ohms on all 6 wires. Only anomaly is the 5V reference signal from the ECM, which bounces from 2.6V to 4.1V with the TPS unplugged, and drops to 1.3V when I plug in either of the TPS sensors (I now have two, the original, and the new one that I got because scan tool give me a TPS fail code). What am I missing?