Тёмный

Wheel Spacer Install GMC Sierra AT4 with Stock OEM Wheels - A More Aggressive Look! 

DONSLIFE
Подписаться 45 тыс.
Просмотров 83 тыс.
50% 1

In this video I install a set of hub centric 1.5" aluminum wheel spacers on my 2021 GMC Sierra AT4. I wanted a slightly more aggressive stance while using the factory OEM wheels. To be clear, I would prefer not using spacers, but for light driving conditions, I thought I would try them. Eventually I will purchase wheel with an ideal offset for any major towing.
Richeer 1.5" Wheel Spacers for GMC 1500: amzn.to/3t4OJRn
I am NOT a Mechanic so install at your own risk. This is just a video of me trying a product on my personal vehicle.
If you choose to use thread locker (locktite) a little red is fine (known as permanent). Use too much and you may need to heat it up with a torch to soften it for removal. The amount I used was fine and I tested removing some nuts with hand tools.
Also be mindful of the torque requirements for your vehicle. The spacers have a recommendation from the manufacturer and so does your wheel.
GMC recommends 140 FT/LBS torque to the hub. These forged 6061-T6 Aluminum spacers use 12.9 grade studs and recommend 120 FT/LBS torque to the hub: amzn.to/3t4OJRn
#spacers #gmc #truck
linktr.ee/donslife - This has link to all of my products and discounts
Contact me for questions, collaborations and product reviews:
Instagram: / donslifechannel
email : donslifechannel@gmail.com
Product Links:
Viair 2.5 gallon air tank 150 PSI : amzn.to/3iacff7
Radenso Pro M Radar Detector : amzn.to/3EEz1oz
Universal Mirror Tap : amzn.to/3q8X9aB
Megulla Interior Ambient LEDs : amzn.to/3zjynbS
Under Hood Light Kit : amzn.to/3brYkOh
XPEL Paint Protection Film : amzn.to/3LjPaiW
Thinkware Q800 Pro here (US) : amzn.to/3MHTmtJ
Tailgate Step Lights US : amzn.to/3uucAwY
Tailgate Step Lights CAN : amzn.to/35ZQSr9
Auxbeam 3" LED Pod / Ditch Lights : shrsl.com/3nnvv (Code : Dons or Donslife)
Auxbeam 8-pod Rock Lights : shrsl.com/3m36a (Code : Dons or Donslife)
Auxbeam LED Switch Panel : shrsl.com/3m35z (Code : Dons or Donslife)
Rough Country 20" Black Series Dual Row Cree LED Light Bar w/Cool White DRL - 70920BD: - Out of Stock on Amazon
Putco 529005 Blade Quick Connect Harness For 2019+ Silverado/Sierra 1500: amzn.to/33EMvjX
amzn.to/3g8EGWB
Bilstein 5100 Front Shock Absorbers for AT4 & Trailboss amzn.to/3pgGVN7
Burger Motorsports BMS Stage 1 Tune (BMW) :
burgertuning.com/?rfsn=620226...
Dragy GPS Performance Meter :
dragymotorsports.com/?rfsn=57...
Fog Light Mod - GM Sierra : boostautoparts.com/
Get SLIPLO Here : amzn.to/3sjrZ0l
Exhaust : Here is a link for a louder version (ATAK) on Amazon. Mine is part #140774BC (BC = Black Chrome Tips). So many versions to pick from - do your research!
Borla-140775 Silverado/Sierra 1500 6.2L 2019 Cat Back Exhaust ATAK: amzn.to/3l9VYq6
AirLift 88388 LoadLifter 5000 for AT4 & TrailBoss : amzn.to/3wZnIQy
Air Lift 25980EZ WirelessONE Compressor : amzn.to/3y09CzI
BlueDriver Bluetooth Pro OBDII Scan Tool for iPhone & Android by Lemur Vehicle Monitors : amzn.to/3mtC8Vz
Veepeak OBDII Bluetooth Scanner for BMW/Bimmercode App: amzn.to/31V91kl
Veepeak OBDII Bluetooth Scanner 4.0 for BMW/Bimmercode App: amzn.to/31SIHaw
Hyperdip for emblems, wheels and trim: www.dipyourcar.com?ref=872
Plasti Dip for emblems, wheels and trim: www.dipyourcar.com?ref=872
Ronin Bullet Antenna Ford/Dodge : amzn.to/3mvoukM
Ronin Bullet Antenna Chevy/GM : amzn.to/3dMakYb
BMW Red M Buttons: amzn.to/3uuXyUS
BMW Red Start/Stop Button: amzn.to/3rZVuTg
Nextbase Dashcam HardwireKit: amzn.to/3mvpiGk
GMC Sierra AT4/SLT Chrome Grill Overlay (can be painted): amzn.to/3tcEdaZ
GMC Sierra AT4/SLT Chrome Grill Overlay Gloss Black: amzn.to/3wzalHI
Shine Armor Quick Coat Ceramic Coating: amzn.to/2OASS0j
DOSE Spider Silk: amzn.to/3h7v2EB
or VViViDshop.com
VVIVID Fuse 5 year 9H High Ceramics Hydrophobic Coating: amzn.to/2Rg1JFE
BMW F-Chassis BMS Hub Centric Wheel Spacers: amzn.to/322OTwF
BAK BAKFlip G2 Hard Folding Truck Bed Tonneau Cover: amzn.to/3qWuzLj
BAK BAKFlip MX4 Hard Folding Truck Bed Tonneau Cover: amzn.to/3s6rl4H
CTEK (56-926) Lithium US 12 Volt Charger: amzn.to/3gcuiP1
Richeer 1.5" Wheel Spacers for GMC 1500: amzn.to/3t4OJRn
Rexing V5 4K Budget Dash Cam : amzn.to/3Acvxou
Disclaimer: Some links may be affiliate links, meaning I earn a commission when you make a purchase. Thank you for the support!
Music Credits:
Rewind - OfShane : RU-vid Audio Library
Arpy: RU-vid Audio Library
Right Here Beside You: RU-vid Audio Library

Авто/Мото

Опубликовано:

 

10 апр 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 378   
@Donslife
@Donslife 11 месяцев назад
Richeer 1.5" Wheel Spacers for GMC 1500: amzn.to/3t4OJRn linktr.ee/donslife - Links to all of my products and discounts
@MistaDontPlay34
@MistaDontPlay34 2 месяца назад
Is Richeer a good brand? I was told to stay away from Amazon spacers. 8mos later, how they holding up?
@Stopvotingdemocrat
@Stopvotingdemocrat 25 дней назад
@@MistaDontPlay34amazon does have a couple of good quality spacers. look for forged
@anthonycaldi7056
@anthonycaldi7056 4 дня назад
What a sweet truck! Great job on the rims! The spacers made a huge difference!
@Donslife
@Donslife 4 дня назад
Yes they do! Thanks for watching ✌️
@paulharney1739
@paulharney1739 2 года назад
Great video. We have the 2020 AT4 2500HD with 20" rims. Seems to be a good amount of clearance since the stock suspension is taller on the 20 then previous years. Love the wheel dip as well. Did not want to replace perfect rims just to black them out - great look!
@maddyshae
@maddyshae 3 года назад
Looks really good, man! Nice!
@Donslife
@Donslife 3 года назад
Thanks 🙏🏻
@4961Studebaker
@4961Studebaker 2 года назад
Revisiting this video as well as the hyper dip mod. Refreshed AT4 Arrives next week. GM only had two wheel options for the remainder of the year. Classic 18” like you have and one 20” I went stock 18. Keep at it. Been watching since you began.
@Donslife
@Donslife 2 года назад
You made a good choice in my opinion. They help with the off road look. The tires are a bit noisy though
@brandonclark7371
@brandonclark7371 2 года назад
Glad to see the use of a torque wrench and lock tight 👍 to those installing spacers, these steps are a must and don’t cheap out on the spacers!! The cost savings will be out the window when a wheel falls off!….
@Donslife
@Donslife 2 года назад
Good advice! No problems here
@Arthurian.
@Arthurian. Год назад
Can one "cheap out" on spacers? Aren't they just solid metal?
@bainsjatt7mm
@bainsjatt7mm 3 года назад
Nicely done.
@richie9172
@richie9172 3 года назад
Looks great! I have a 2020 AT4 CarbonPro and I have done similar mods. I did change the side steps to the AMP Research and the truck looks cleaner and taller. Also I recommend painting the calipers. Yours is the best white truck I've seen.
@Donslife
@Donslife 3 года назад
Thanks brother!
@DualThreatGamble
@DualThreatGamble 3 года назад
Nice work.
@lukelivingston7157
@lukelivingston7157 2 года назад
Update on my previous comment: I ordered a new pair (this one from the American Amazon location) and they fit excellent! Put them on this morning. Haven't been on the highway yet but driving around town seemed just fine. I ended up using medium lock tight though. Hope all is well Don! Keep going with this truck!
@Donslife
@Donslife 2 года назад
Right on Luke!
@MrTA1983
@MrTA1983 3 года назад
Don, those spacers look great and are exactly what I want for my 2021 Sierra Elevation. I will definitely be ordering the same ones. Thanks for the idea and tutorial. Cheers from London, Ontario brother!
@Donslife
@Donslife 3 года назад
Thank you sir!
@corkran1986
@corkran1986 Год назад
@MrTA1983 Did you end up putting on these same wheel spacers? If so, how long have you had them on there and how have they worked out for you?
@laleydeiguala6367
@laleydeiguala6367 3 года назад
Yes looks much better i have 2020 gnc sierra and i love you ideas for you truck tanks
@Donslife
@Donslife 3 года назад
Thanks 🙏🏻. More to come!
@andresaguirre3878
@andresaguirre3878 Год назад
Nice truck with spacers
@mattcanfield6384
@mattcanfield6384 2 года назад
Just got a new at4 last week going through my gm parts bin and found a set of 1.25 boras I had for a different truck I think they are going on I'm really liking the look of yours
@Donslife
@Donslife 2 года назад
That’s awesome 😎
@rshinn8776
@rshinn8776 Год назад
Looks way better with the spacers. Plan on running them too
@Donslife
@Donslife Год назад
No regrets here. Will be getting some for our new Escalade too
@corneliodiaz5904
@corneliodiaz5904 3 года назад
Amazing look with the spacers! Not overly aggressive, just perfect!
@Donslife
@Donslife 3 года назад
Thank you, I agree!
@LuisCarlos-fy6rq
@LuisCarlos-fy6rq 2 года назад
What tipe os spacers u bought
@kellyhughes1266
@kellyhughes1266 2 года назад
Thanks Don
@mikerobbins5049
@mikerobbins5049 2 года назад
Rig looks great...
@Arthurian.
@Arthurian. Год назад
Nice subtle difference. I'm getting a Canyon Denali & I think this could be a worthy addition.
@Donslife
@Donslife Год назад
Could be!
@ChrisDIYerOklahoma
@ChrisDIYerOklahoma 2 года назад
Solid video! Thanks for showing us. I have a 2021 GMC Sierra AT4 (6.2L) and "went up" one size taller tire (275/70 R18)...about 1/2" taller vehicle height. Curious if these spacers will work and not rub? Right now (no spacers) no rubbing and smooth ride with the Bridgestone Dueler A/T Revo 3 tires on all four corners. Thank you.
@Donslife
@Donslife 2 года назад
Hi Chris, I would take some gap measurements with your front wheels turned full lock left and right and see how much space you have if the wheel was moved outward. My suspicion is that you would have a little rubbing at full lock and/or when going down a curb/driveway while turning. It would depend on the spacer's size too of course.
@user-fq2dw2yk9j
@user-fq2dw2yk9j 3 года назад
great video . miss sk again
@Donslife
@Donslife 3 года назад
Thanks
@stevebecwar9286
@stevebecwar9286 3 года назад
Looks Good
@Donslife
@Donslife 3 года назад
Thanks Steve
@whitetailsup760
@whitetailsup760 2 года назад
Wow that’s a sharp truck can’t wait to get my 2023 at4 6.2 how is mpg non towing
@eduardohrlic6442
@eduardohrlic6442 3 года назад
Love all the mods you have done!!! Have you considered doing a block delete on the rear suspension to level the truck? A leveling kit ruined my steering on my prior 2017 Silverado. So I am hesitant to level my At4.
@Donslife
@Donslife 3 года назад
Thanks for the kind words Eduardo! I have thought about it but before I do anything, I want to see how well it tows some of my trailers.
@josmo3020
@josmo3020 2 года назад
I leveled my 2019 AT4 with the Readylift sst kit that comes with the control arms and a 1" block for the rear. So far....no regrets. It's a big job though.
@matthewweir6345
@matthewweir6345 3 года назад
Nice!
@user-er8zi1ws4n
@user-er8zi1ws4n Год назад
Hey don, how often do you need to torque the spacers after re-torquing the first 500 miles?
@josmo3020
@josmo3020 2 года назад
Luv all your videos. You have helped me a bunch with new ideas and tips for my GMC 2019 AT4. I just leveled it with the Ready Lift kit and now it is time for my spacers. I would suggest more lock tite front to back across more of the threads rather than across a few threads going left to right. Any thoughts on anti seize on the center ring and on the wheel hub? My test fit was even snug and semi hard to get off before I went full torque. Any hoot... you do great work and I am like you, no vehicle stays stock for long. Keep up the good work. My Hyper Dip GMC badges turned out great..inspired by you.
@josmo3020
@josmo3020 2 года назад
I also put all black lug nuts, and all are keyed/locks
@Donslife
@Donslife 2 года назад
Thanks for the support! A little anti seize against the hub shouldn’t hurt. I am happy with my Hyperdipped parts too. ✌🏼
@mhhmmm_its_ed
@mhhmmm_its_ed 2 года назад
Thnx. Will be doing this also 🙌🏻🙌🏻🙌🏻
@Donslife
@Donslife 2 года назад
I like the look they helped me achieve!
@mhhmmm_its_ed
@mhhmmm_its_ed 2 года назад
@@Donslife I’m doing this on my stock 22 I’ve lowered my truck
@Donslife
@Donslife 2 года назад
@@mhhmmm_its_ed Nice! I used to have a lowered truck with a notched frame and bagged on all 4 corners
@angelf9800
@angelf9800 Год назад
I have a 2022 gmc elevation and did that to my truck and got a 2 inch leveling kit and got Nitto Ridge Grappler 285/60/20 tires and now people think it’s a AT4 lol 😆
@Donslife
@Donslife Год назад
Nice 👍🏼 😆
@1life2liv
@1life2liv 3 года назад
Looks good! Did you consider Bora brand spacers at all?
@Donslife
@Donslife 3 года назад
Yes I did! I couldn’t find any in Canada at the time.
@eliteaviators
@eliteaviators 2 года назад
Hey man, love the content. I assume you’re still rockin these spacers. I’m looking to put in my order.
@Donslife
@Donslife 2 года назад
Yep! Still have them on! Thanks for the support!
@AustinLeeckRacing
@AustinLeeckRacing 2 года назад
Hey Don, do you think that 1.25” spacers would still allow the factory studs to sit inside the wheel grooves?
@Donslife
@Donslife 2 года назад
If it were me I would take a wheel off and measure the stud length and compare to the depth of the groove plus add 1.25” for the spacer
@Italianborn
@Italianborn Год назад
What size socket for the lug nut ? I bought a 22mm but it seems to barely grab on I’m wondering if it is different , also what brand wheel spacers you went with ?
@christopherbarrett7760
@christopherbarrett7760 2 года назад
I’ve seen your newer videos so I know you don’t have new rims on your truck yet but if you are looking for a hella flush rim I have 20x9 with 0 offset on my AT4 with I believe a 10.5 or 11 wide tire? And my tread lines up perfect with the fender and the only thing outside is the side wall by a few millimeters
@Donslife
@Donslife 2 года назад
Thanks! I will be getting something! Send me pics on Instagram or email if you want. Info is in my video descriptions.
@bkimball9590
@bkimball9590 Год назад
Great Video! How much more dirt/mud does it throw up on truck with the wheels out 1.5"? thanks
@Donslife
@Donslife Год назад
At first that was a concern, but honestly when you look at the spray pattern from the dirt and road film, it isn’t bad at all. The steps and built in mudflap still catch most of it.
@jeremyruss2407
@jeremyruss2407 Год назад
Any problems with these after a bit of use ? I’m waiting on mine to come in the mail for my f150
@KruiserIV
@KruiserIV 3 года назад
Thanks for the video. Any chance you've since discovered any rubbing due to the spacers?
@Donslife
@Donslife 3 года назад
Thank you! No rubbing with the size that I chose. Even with the steering full lock going up and down (backwards) the curb of my driveway.
@KruiserIV
@KruiserIV 3 года назад
@@Donslife Thank you!
@heathbecklund3930
@heathbecklund3930 2 года назад
What brand of wheel spacers are those? Looks great. I have a 2021 LT Trailboss
@Donslife
@Donslife 2 года назад
Hey Heath! The link to them is in all of my video descriptions. Made by Richeer. Made Autoguide.com’s top 10 list. There are better ones but stock and distribution is hard to find in Canada. I like mine. No issues at all.
@lawdawg5823
@lawdawg5823 Год назад
What do you suppose the biggest tire you can run with 1.50” spacers?
@benq.mechanical
@benq.mechanical 3 года назад
Fellow Saskatchewanian! 🌾
@Donslife
@Donslife 3 года назад
Bonus!
@bradlast9580
@bradlast9580 3 года назад
I really like your running boards/steps. What brand are they?
@Donslife
@Donslife 3 года назад
Thanks! Brand is GMC. Sierra is stamped right on them. Limited availability now due to production issues I guess. Chevy has/had them too. They are a 2021 build option but I think they are removed until they can fulfill orders. I almost didn’t get mine. The dealership had to take them off of another truck.
@zway7144
@zway7144 2 года назад
What size is the socket?
@joebowles1432
@joebowles1432 3 месяца назад
Hey Don, really love your content! I am curious after two years how the rock chips have been to your paint since you put the 1 1/2" wheel spacers on?
@Donslife
@Donslife 3 месяца назад
Surprisingly nothing of concern. I don’t drive on gravel too often either
@joebowles1432
@joebowles1432 3 месяца назад
Awesome, thanks for the response. Do you have a PPF or ceramic down the sides?
@Donslife
@Donslife 3 месяца назад
@@joebowles1432 right now I have a wrap and fender flares but for a while, no ppf or ceramic coating behind the wheels. Just the factory splash guards
@kevinb8537
@kevinb8537 2 года назад
Looks a lot better I went with 2in spaces but I think it was to much so I might change them 1.5 spaces I am running 22x10 rims
@Donslife
@Donslife 2 года назад
Fair! I liked them on my factory wheels. If I add some nice fender flares, I will be upgrading the wheels to have the ideal offset and line up.
@shaffer493
@shaffer493 2 года назад
@@Donslife Thanks for this video, and all the others you've posted. I'm a Trail Boss owner both are very similar. Thinking about ordering the spacers, any issues after some months of use and road time?
@JebClarke902
@JebClarke902 11 месяцев назад
It's been a while since you have installed your spacers. Are they still on your truck? How do you like them? Have they given you any issues? Is there anything you would do different now? I'm thinking about getting some for my truck and trying to figure out what size I should get.
@Donslife
@Donslife 11 месяцев назад
I have full confidence in the ones I used in the video. No problems
@andrewd9673
@andrewd9673 2 года назад
Don, any chance you would be willing to temparily remove the spacer on one tire and measure distances to fender and compare to with spacer? I have same type tire as you, but on 20in rims and wonder how much change in clearance the spacer causes.
@Donslife
@Donslife 2 года назад
Hi Andrew, next time I have a wheel off I can measure for you. It should be exactly 1.5” more towards the fender. I measured mine when I planned for them. The stock 20” wheels have a Goodyear All-Terrain, the 18’s are wrapped with Goodyear Duratracs. So even if I measure for you, our tires might be a little different on the tread on the outer edges. You can send me an email or message in Instagram (info in all of my video descriptions) and I can let you know measurements whenever I take the wheel off again.
@ljimzlj8079
@ljimzlj8079 3 года назад
Great vid. What size r ur tires?
@Donslife
@Donslife 3 года назад
For now the factory size Duratracs 265/65R18
@alexislandaverde1361
@alexislandaverde1361 3 месяца назад
Do u have to retorque every 150 miles every time and what if I put a 2 inch leveling in the front does that mean I need to keep retorque after a certain amount of miles
@Brexmaga
@Brexmaga Год назад
Love the look. What tires do you have?
@Donslife
@Donslife Год назад
Thanks. These are the factory Goodyear Duratracs that came with the truck
@peachescjr
@peachescjr 11 месяцев назад
Hey Don, in your opinion could you of gone with a 1.25 inch spacer and still had enough of a recess in the wheel to not have to trim any lugs? Many thanks
@Donslife
@Donslife 11 месяцев назад
It might just fit but would be very very close. Some shaving of the lug tips might be in order
@bigdog3495
@bigdog3495 3 года назад
Looks nice man ! Do you have a front end level on your truck ?
@Donslife
@Donslife 3 года назад
Thanks. No level kit yet. Once I pick out new wheels I will most likely install one.
@bigdog3495
@bigdog3495 3 года назад
@@Donslife Love your channel ! Thanks for everything you share. I"ll be ordering a 2022 At4 as soon as they let me . Torn between the 6.2L and the 3.0L Duramax.
@Donslife
@Donslife 3 года назад
You are too kind! I don’t think you can go wrong with either. That is a tough decision.
@ardenausland3975
@ardenausland3975 2 года назад
Hey Don. Love the videos and all your mods. I just got a 2022 AT4. Ordered some spacers yesterday. Putting them on next week. 1.25. Do you still like them? I will probably go with a different wheel someday. But I do like these factory 20’s.
@Donslife
@Donslife 2 года назад
Mine have been great 👍🏼 No vibration, no issues with any nuts loosening over time. I ended up towing quite a bit too after I found they were performing perfectly.
@ardenausland3975
@ardenausland3975 2 года назад
@@Donslife awesome. Thanks Don. I do pull a trailer in the summer too. So good to hear. I think I’m going to try the hyperdip on my wheels as well.
@Donslife
@Donslife 2 года назад
@@ardenausland3975 awesome! My Hyperdip is still 100%. Take your time and follow the steps in the video and it should work out. Keep the cans warm and spray in low humidity
@willianramos226
@willianramos226 Год назад
Hey buddy, i have the same truck. Did you had problems with your spacer?? My tire is 275/60r20 oem rims and bfgoodrich all terrain I thinking to buy 2 inch spacers and i need to know your opinion
@Donslife
@Donslife Год назад
No problems at all my friend
@CSJiGSaW08
@CSJiGSaW08 2 года назад
Does this mess up the bearings in the future and eat up the tires faster? So more wear than factory?
@Donslife
@Donslife 2 года назад
There is the potential, especially when the spacer gap is large. 1.5” is considered conservative on a full size truck. Personally I am not concerned with my set up
@tylerlewin8712
@tylerlewin8712 2 года назад
Dang! I bought the exact ones you did and I'm having some rubbing issues. Factory tires too, but mine is a 2019. Wonder if there's something different. I'm not convinced a leveling kit would resolve it either 😔
@Donslife
@Donslife 2 года назад
That’s odd. I haven’t had one rubbing incident
@tylerlewin8712
@tylerlewin8712 2 года назад
@@Donslife It's on the rear-most side on the plastic rock deflector. It's not too bad - I think I'm just going to grind it down a bit and problem solved. Love your videos, and hope you don't mind me stealing all your ideas 😁 If I do, I'll have the best looking AT4 in North Dakota!
@hydraulicshop9323
@hydraulicshop9323 Год назад
Try using green locktite you can heat it up and it will turn back to liquid.
@gabangrysauce5834
@gabangrysauce5834 3 года назад
looks great ! still tow ur max with those ?
@Donslife
@Donslife 3 года назад
Thanks, I haven’t yet. 6000lbs is the most I have done with them. I might do 7500 +/- but only short hauls to go camping. We’ll see. I would prefer no spacers when max towing, it would only take me 30 - 40 minutes or so to take them off for a big tow.
@SlipAngleG70
@SlipAngleG70 3 года назад
Looks just right now. Do you have spacers on the M4?
@Donslife
@Donslife 3 года назад
Yes I do. Putting the summer tires and rims on soon. Snowing quite a bit here today
@oktayyildirim3653
@oktayyildirim3653 2 года назад
Hey. I’m following you and enjoying your videos. I want to ask a question. I have same truck just 5,3 litres and I want to use spacers and exhaust but I’m not sure it is effect the warranty. Do you know something for these? Thank you.
@Donslife
@Donslife 2 года назад
Hi there! In the US there is a law to help protect you. To refuse warranty the manufacturer has to prove the aftermarket part caused the failure. Some dealership though might refuse to work on a system that has a modification done to it. en.wikipedia.org/wiki/Magnuson%E2%80%93Moss_Warranty_Act In Canada we have similar protections. Outside of the US and Canada, I can't answer your question
@oktayyildirim3653
@oktayyildirim3653 2 года назад
@@Donslife I’m living in Toronto, ON. I bought my brand new at4 at 6 months ago from Sherwood Park Gmc Edmonton, AB. I asked before from service, but they couldn’t answer to me clearly. They don’t know. :) And also my truck doesn’t has 360 camera. The service doesn’t sell it. Do you prefer aftermarket 360 cam? What do you think about that? Take care
@KeithClausen
@KeithClausen Год назад
Hi Don...love your videos. I have the same wheel set up as you, however I have 285/70/18 tires. Do you think the size difference will create a rubbing problem with these spacers?? Thanks
@Donslife
@Donslife Год назад
Not 100% sure. Can you turn your wheels full lock and estimate if moving them outward 1.5” would still allow clearance?
@KeithClausen
@KeithClausen Год назад
@@Donslife I decided to go with 1.25" spacers to be safe or so I thought. Drivers side can turn full lock with no problem. Passenger side rubs the back upper mud flap at about a quarter turn. So I guess I'm going to do some alterations. I saw somewhere where they remove the bracket the mud flap bolts to give more room.
@Donslife
@Donslife Год назад
Well at least we know
@michaelwilson1958
@michaelwilson1958 9 месяцев назад
Did you have to cut your studs or did wheels fit over them without any trimming?@@KeithClausen
@Ryan-fi2ul
@Ryan-fi2ul 3 года назад
What kind of lift does your at4 have? And also what are the tire sizes I’m surprised there’s no rubbing given the new angled model wheel wells.
@Donslife
@Donslife 3 года назад
Hi Ryan, no lift installed currently, just the 2” AT4 factory state. The tires/wheels are stock too in this video. The spacers I feel helped the stance look better without compromising the little space with the front wheel wells.
@Lloydski
@Lloydski 10 месяцев назад
Hey just got a white AT4 6.2 2023 same as yours 6 miles on it and adding mods already. Its what we do right... Lol Do you still have your wheel spacers on. And do you know if they would void the warranty. I saw the vid about warranty on the air cleaner that will be next but got to get that stance right first.
@Donslife
@Donslife 10 месяцев назад
Congrats. Yes I still have spacers on. No issues and they won’t void your warranty unless they can be proven to have contributed to the failure of a warrantied part. So if your air conditioning stops working they can’t deny you warranty due to wheels spacers.
@alisjamed
@alisjamed Год назад
I have stock 20" rims and the 1.5" spacers do cause the tire to rub the skirt at stock height. Looks like stock tire on 20's is approx. 1" taller than the 18's. Any spacer less than 1.5" will require the stock studs to be cut. Darn.
@Donslife
@Donslife Год назад
Thanks for the insight!
@RobMacLennan
@RobMacLennan 3 года назад
Looks great. Are they 1.5” or 1.25”?
@Donslife
@Donslife 3 года назад
1.5" my friend
@alexislandaverde1361
@alexislandaverde1361 3 месяца назад
How do u find the torque specs to the truck parts
@richlaq7101
@richlaq7101 Год назад
Hello, what type of floor jack you are using in this video? Thank you!
@Donslife
@Donslife Год назад
5 ton from Costco Canada, must be 10+ years old
@kellyhughes1266
@kellyhughes1266 2 года назад
Hey Don, I just bought the Richeer spacers (1.25) and in looking at the directions for the 9/16" stud it shows torque to 135-145 but your video has different numbers. Based on that spec, I plan to torque the spacer to the factory spec of 140 ft/lbs and then also torque the wheel to the spacer at 140 ft./lbs. Did you have some other instructions to work from or am I missing something? Thanks for your response my friend and keep up the good work.
@Donslife
@Donslife 2 года назад
Hey, I think the instructions that came with mine were 120lbs for the spacers to the hub and 140lbs for the wheels as per GM. I just torqued the fronts again recently after removing them to install shocks. The spacer nuts were all still secure too. I might still have the instructions that came in the box for mine. If I find them I will let you know. 140lbs would likely be okay for both sets.
@AustinLeeckRacing
@AustinLeeckRacing 2 года назад
Did you need to trim studs with the 1.25” spacers to fit in stock wheels?
@johnnyp143
@johnnyp143 Год назад
I have 20" wheels on my at4. What's your thoughts/idea on whether or not the tire would rub on fender if I add spacers?
@Donslife
@Donslife Год назад
Somebody on here told me they had a little bit of rub at full lock with the stock 20” but it might have been the 2” spacer. Mine is the 1.5”.
@jakjones3112
@jakjones3112 Год назад
Hello. I wonder if you have any thoughts on the added stress on suspension components and bearings? Seems to be only downside but no one ever talks about it
@Donslife
@Donslife Год назад
I have heard the same, but this is only my opinion…..Heavier wheels/setup than stock and as the weight is moved further from the hub, then yes I think it puts more stress on the components. Especially the bearings and other wearable parts. I think many people also replace their vehicles more frequently and leave the wearing out for someone else to deal with.
@jakjones3112
@jakjones3112 Год назад
@@Donslife I think that’s a good point. Running 85 pound mud tires probably puts more wear on a suspension than a 50 pound stock tire and wheel with a 1.5 spacer
@joem5447
@joem5447 11 месяцев назад
Did you have the level kit installed before the spacers? Or will it be no rub with stock at4 lift? Thx!
@Donslife
@Donslife 11 месяцев назад
No level kit and no rubbing with the factory 18” wheels and 275/65r18 Duratrac Tires
@joellim0707
@joellim0707 2 года назад
Hey Don, What’s the center bore or hub size on those spacers? Thanks
@Donslife
@Donslife 2 года назад
78.1mm - Here is a link to the one 1.5"s I have : amzn.to/3t4OJRn If out of stock, it will automatically go to the next available spacing size
@mkuta1
@mkuta1 2 года назад
Don what type Jack are you using? New AT4 owner here and want to buy a Jack to do some of your mods. Looks like Black Jack but not sure of tonnage?
@Donslife
@Donslife 2 года назад
Black Jack 2.5 ton. I only lift one corner at a time usually and back up with 6 ton jack stands.
@adamhamad4387
@adamhamad4387 2 года назад
Will my tires rub if I put 1.5 inch spacers on a 275/60/20 stock wheel and tire?
@Donslife
@Donslife 2 года назад
I can’t say for sure, but I don’t think so since the overall width and diameter are the same
@rubencastano6771
@rubencastano6771 Год назад
Hey Don, are you still running these spacers? How do you like them?
@Donslife
@Donslife Год назад
Still running them. No regrets at all
@jasonnellis3566
@jasonnellis3566 2 года назад
hello i have a 2014 silverado 1500 with no life of any kind with stock wheels now the rims are 18x8.5. tires 265x65x18. im lookn at 1.5 spacer the look im lookn for is just as yours. only thing what is your rim size. truck looks awesome.
@Donslife
@Donslife 2 года назад
18x8.5 Grey/ Machined Aluminum. 6x5.5 Bolt Pattern, 26mm Offset 275/65R18 Goodyear Duratrac Tires
@jasonnellis3566
@jasonnellis3566 2 года назад
Ok cool so I should have the same look as yours correct
@deanstoronsky4371
@deanstoronsky4371 11 месяцев назад
Do you have to do a re-alignment on the truck after adding the spacers? I just got a leveled 2021 AT4 with 295\60\R20s on the factory Wheels.
@Donslife
@Donslife 11 месяцев назад
Not usually
@rickchaidez5711
@rickchaidez5711 5 месяцев назад
Did you put the spaces? What size of spaces did u use and does it rub?
@brian5975
@brian5975 2 года назад
Have your drl’s turned blue/purple yet? Mine did at 410 Miles…..
@Donslife
@Donslife 2 года назад
No sir. I did hear it can happen but should be covered under warranty though
@marcosfeliz1908
@marcosfeliz1908 11 месяцев назад
Hey Dan, are these spacers fits with the OEM rings ? At 4 2020. And what model and sizes are your tires on this video ? Thank you very much
@Donslife
@Donslife 11 месяцев назад
These spacers are a 78.1 hub bore so they are a perfect fit. The tires are the stock Duratracs. 275/65R18
@marcosfeliz1908
@marcosfeliz1908 11 месяцев назад
@@Donslife thank you very much
@JohnD0129
@JohnD0129 Год назад
What’s the reasoning the have you torque different lbs every 500 miles. Why not the factory 140lbs right off the bat ?
@OO-007
@OO-007 3 года назад
Hey Don, what kind of spacers did you use and how are the holding up now ? Will they last in our winters since it’s made of aluminum?
@Donslife
@Donslife 3 года назад
Hi, the spacers link is in my video description. I think they will be okay. So far they have been excellent. I am sure that my minimal spacer size is why I am confident. They are forged aluminum alloy with a 2 yr warranty. When I get aftermarket wheels, I will be removing them. I plan to keep them with these wheels though since they offset is perfect for what I wanted.
@OO-007
@OO-007 3 года назад
@@Donslife thanks for the info, I am going to run the stock rims as well
@OO-007
@OO-007 3 года назад
@@Donslife one more question do you have to re torque the spacer as well after 500km or just the rim?
@Donslife
@Donslife 3 года назад
If you use thread lock, you shouldn’t have to re-torque the spacers. I didn’t go heavy on the thread lock either since I didn’t want an issue when I want to take them off.
@the_anxiousphotographer
@the_anxiousphotographer 2 года назад
How do you feel about towing with these on?
@Donslife
@Donslife 2 года назад
Just fine. Mentioned a few times in newer videos
@superman2099200
@superman2099200 3 года назад
How far does the stud stick out past the spacer?
@Donslife
@Donslife 3 года назад
I didn’t measure, but maybe 1/8”- 1/4”. The wheels had small recesses that kept me from shaving them down
@hg6081
@hg6081 Год назад
After all this time do you still recommend this cheap ones? Or you recommend the 1.5 Supreme Suspension form American Muscle? I’m not going off-roading, just daily driving.
@Donslife
@Donslife Год назад
I recommended hub-centric but I don’t have a favorite brand. I had extremely limited options in Canada at the time (no one had stock) so I tried these and I am happy with them
@hg6081
@hg6081 Год назад
@@Donslife perfect! I’ll give it a try. Thanks!
@terpencar
@terpencar 3 года назад
When you re torqued everything did you do the spacers to 140 and the tires to 140?
@Donslife
@Donslife 3 года назад
Yes 140 on the Wheels and no more than 140 with the spacer to the hub. This brand of spacer recommended 120lbs on the spacer, but I felt the grade of the bolts would be fine at 140. This is what I did, but you have to decide for yourself
@terpencar
@terpencar 3 года назад
@@Donslife thank you sir!
@jonathanvillapudua3995
@jonathanvillapudua3995 3 года назад
What size is your tire buddy? I have some 35 /12.50/20
@Donslife
@Donslife 3 года назад
Truck is 4 months old and I am still running the stock 275/65 on 18’s
@TheStang8907
@TheStang8907 2 года назад
Are this 1.5” or 2.0” reason I ask is because the link for them takes me to a 2” and an option for 1.25” spacers no 1.5” option.
@Donslife
@Donslife 2 года назад
These are 1.5”. When they sell out it defaults to other sizes that are in stock.
@AB-rr2rb
@AB-rr2rb 2 года назад
So after the 500miles are you re torquing both spacer and the wheels or just the wheels to 140lbs?
@Donslife
@Donslife 2 года назад
Just the wheels. That’s why I put a little thread locker on the spacers. I checked on them though and they were all still torqued.
@AB-rr2rb
@AB-rr2rb 2 года назад
@@Donslife thanks a lot! Ordered same set.
@Donslife
@Donslife 2 года назад
@@AB-rr2rb cool! If you use thread locker I would recommend just using a small amount. Heat can be used to soften the product. I checked mine like I mentioned and I could still loosen them, but they were all torqued to spec still
@caseysathan7761
@caseysathan7761 2 года назад
How is your paint? Are you getting rock chips? This is the only thing holding me back from spacers
@Donslife
@Donslife 2 года назад
Good question but don’t think I even have one rock chip yet that the wheels would be responsible for. To be fair if I drive on gravel, I try to go very slow
@caseysathan7761
@caseysathan7761 2 года назад
@@Donslife okay that's good to know! Thanks for the reply
@caseysathan7761
@caseysathan7761 2 года назад
@@Donslife I don't have the AT4, will the spacers cause any rubbing? I have a 1.75 inch front level, and running LT 285/60/20 tires on stock wheels, on the elevation model.
@nickmorales3397
@nickmorales3397 2 года назад
Are those the 20” or 18” wheels?
@Donslife
@Donslife 2 года назад
18” factory AT4 option
@ryanrogers822
@ryanrogers822 6 месяцев назад
How much poke did you have past the fenders?
@Donslife
@Donslife 6 месяцев назад
In this video: Pretty much flush for the tire tread but the sidewall pokes out about 1/2”-3/4”.
@anthonydarmanie718
@anthonydarmanie718 Год назад
What do you do when there is a wobble in the steering?
@Donslife
@Donslife Год назад
Properly installed hub centric spacers wouldn’t contribute to steering wobble. Usually an unbalanced wheel is the culprit. Second, maybe a suspension component is out of spec or improperly adjusted.
@Maton79
@Maton79 3 года назад
how are the spacers working out man? I just got the same one for my AT4
@Donslife
@Donslife 3 года назад
Working perfectly. So far I am happy. The new stance is just right with the factory fender flares too.
@chadkauffman2744
@chadkauffman2744 3 года назад
@@Donslife where did you get the spacers? I got a 2021 gmc sierra elevation crew cab with 2 inch lift kit. I have stock wheels 275 60 20.
@Donslife
@Donslife 3 года назад
@@chadkauffman2744 Hey Chad, there is a link in the video description. I am towing 5000lbs today for a few hours and doing a little video. If I feel any vibration or anything, I will be commenting on it for sure. Hopefully there won’t be a problem
@chadkauffman2744
@chadkauffman2744 3 года назад
@@Donslife I don't haul or tow anything. Would spacers work for me with my tire size? 275 60 20. I wanna get more aggressive tires. Either toyo at3 or ridge grappler. Your duratrac look good. I'm from PA
@JJM24
@JJM24 Год назад
How have the spacers held up? The reason I ask is because I’m torn between this brand and the “Bora” Spacers but I am unsure if it’s necessary to spend nearly double on the Bora ones.
@Donslife
@Donslife Год назад
They have been perfectly fine. No regrets at all
@JJM24
@JJM24 Год назад
@@Donslife Awesome, I appreciate the quick response!!
@Donslife
@Donslife Год назад
No problem! I appreciate you watching the video 👍🏼
@RR-ty6ki
@RR-ty6ki Год назад
Are those stock running boards?
@Donslife
@Donslife Год назад
Yes sir. Called the High Clearance Step. Very low inventory the past couple years
@shaylacarpenter4360
@shaylacarpenter4360 4 месяца назад
What size are your tires ? Mine are rubbing so bad after this
@Donslife
@Donslife 4 месяца назад
275/65r18
@fowlbassinlife5969
@fowlbassinlife5969 3 года назад
Any vibrations / shimmy?
@Donslife
@Donslife 3 года назад
Zero whatsoever. Towing 5000lbs today a few hours so when that video gets posted I will let viewers know if something came up.
@robinadduru5377
@robinadduru5377 2 года назад
The ones you got on the link are 1.25" are those the ones you used? Those look nice though thinking about pulling the plug on these. Thanks in advance!
@Donslife
@Donslife 2 года назад
Mine are 1.5”. The link is for 1.5”, but if they are out of stock it will load the next available size. I would do 1.25” personally vs 2” for the wheels I am running.
@robinadduru5377
@robinadduru5377 Год назад
@@Donslife Im using the stock elevation wheels on my 20 Sierra. If I use 1.25" do I have to cut the bolt if it sticks out pass the spacer?
@Donslife
@Donslife Год назад
You can take your wheel off and measure the exposed stud length. Then look at the back of your wheels and determine if there are recesses (like mine) that the end of the stud could set into if it was a little long
@robinadduru5377
@robinadduru5377 Год назад
@@Donslife thanks for your help subbed!
@Donslife
@Donslife Год назад
Happy to help!
@konjis1
@konjis1 Год назад
What Jack are you using?
@Donslife
@Donslife Год назад
One I bought from Costco like 10+ years ago
@alexisreyes5435
@alexisreyes5435 2 года назад
Are these 2 inch spacers?
@Donslife
@Donslife 2 года назад
1.5”
@lukelivingston7157
@lukelivingston7157 2 года назад
Hey Don, I used your link and got the spacers you did, but today when installing the lip on the spacers that line up with the rim, does not fit. Any ideas?
@Donslife
@Donslife 2 года назад
Hi Luke, My initial thought is that they shipped the wrong ones. I double checked my actual order and link and they match. The description is : Richeer 6x5.5 Wheel Spacer for Sierra Silverado Avalanche 1500 Tahoe Escalade Express Savana Yukon, 4 PCS 2 Inch Hub Centric 6x139.7mm Wheel Spacers with 14x1.5 Studs & 78.1mm Bore The part number in my order info is : ‎AM23891 I would send them back if they don't fit your stock hubs. The hub centric ring is critical and needs to fit snug.
@lukelivingston7157
@lukelivingston7157 2 года назад
@@Donslife yeah I got the same measurements. Maybe these are just a bad batch. I tired two of them on the same rim, both didn't snug up. Will be returning.
@Donslife
@Donslife 2 года назад
Which wheel do you have stock 18” or 20”
@lukelivingston7157
@lukelivingston7157 2 года назад
@@Donslife I have the same wheels as you, the 18".
@Donslife
@Donslife 2 года назад
Sorry for all of the questions, just trying to help you out
@AndresSanchez-xy4ms
@AndresSanchez-xy4ms Год назад
What size are your tires in this video?
@Donslife
@Donslife Год назад
275/65r18 with factory 18” AT4 wheels that come with a 24mm offset (.94”) so the 1.5” spacer helped.
Далее
THE TRUTH ABOUT SPACERS!
9:08
Просмотров 773 тыс.
Sh*t I Never Knew: "Rollin' Till the Wheels Fall Off"
7:24
Do NOT Buy Wheel Spacers || Watch First
8:15
Просмотров 389 тыс.
Are Wheel Spacers Actually Safe?
8:06
Просмотров 1,7 млн
Are Wheel Spacers Safe?
9:01
Просмотров 42 тыс.
EQUIPAMENTOS TOP ? #moto  #motopeças
0:13
Просмотров 10 млн
Кто доливает масло в бензин?
0:59