Where to grease on Husqvarna lawn mower

Подписаться 66 тыс.

Просмотров 85 тыс.

50% 1

I show you where to grease on your Husqvarna lawn mower.
Thank you very much for watching and God bless.
✅Grease gun amzn.to/3uxdMOK
✅Grease amzn.to/3IF5AkS
✅rubber gloves (you select size) amzn.to/3K2rYFx
✅wood ramp video • Ultimate DIY wooden ramps
✅ My T-shirts. Thank you for supporting my channel✅
diy-jim.creator-spring.com
5% off shirts use DIYJim2021 when checking out
✝Bible ESV easy to read amzn.to/3qshNQP
✝Bible NKJV amzn.to/30ns322
✅Titan Solar Generator (large generator) poweredportablesolar.com/ref/48/
✅Go Pro that I use amzn.to/2WC6WXH
✅Wireless mic used: Rode Wireless Go amzn.to/2WxQt7c
*Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
*Disclaimer - Thank you for visiting my RU-vid channel. Please understand that the content on the DIY jim RU-vid channel is intended for informational purposes only. I make no warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information posted on my RU-vid channel is strictly at your own risk, and I will not be liable for any losses and damages in connection with the use of my RU-vid channel.
#greaseyourhusqvarnamower. #Husqvarnamower

Хобби

Опубликовано:

15 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 125

@DIYJIM 2 года назад

(click read more) Thank you very much for watching and God bless. ✅Grease gun amzn.to/3uxdMOK ✅Grease amzn.to/3IF5AkS ✅rubber gloves (you select size) amzn.to/3K2rYFx ✅wood ramp video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-97xIA4t4YXs.html ✅ My T-shirts. Thank you for supporting my channel✅ diy-jim.creator-spring.com 5% off shirts use DIYJim2021 when checking out *Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.

@williamlinder5180 Год назад

Im not going to lie I’m the guy that neglects maintaining my mower for years. So when I saw your video library about how to maintain my same mower I was super happy. You made the oil change and greasing look easy(uncomplicated).

@DIYJIM Год назад

Thanks for watching William

@user-ny2rx2ly5o 4 месяца назад

There are zerks fittings on top of the spindles as well.

@DIYJIM 4 месяца назад

Thanks for watching

@beverlymorris5781 4 месяца назад

Thanks Jim. I'm a single lady doing my own maintenance. I appreciate your help. It was easy after watching your video. Many blessings to you good sir!

@DIYJIM 4 месяца назад

Glad to help

@claytonpulley4947 Год назад

D.J. Thanks for a great video. I knew about the 4 zerk fittings, but wasn't aware of lubing the steering. All the best!

@DIYJIM Год назад

Thanks for watching Clayton

@HITEKSTRANGER Год назад

Excellent ! Thanks i didn't know about the fittings at each front wheel !! God Bless !

@DIYJIM Год назад

Thanks for watching Mark

@jessicay2471 Год назад

Fantastic! Thank you for this.mowing had become a loud and squeaky endeavor

@DIYJIM Год назад

Glad I could help

@woodrowboudreaux9951 Месяц назад

Pretty straightforward. Just bought a new grease gun for this very task. Thanks.

@DIYJIM Месяц назад

Welcome thanks for watching

@RodneyLundrigan 19 дней назад

Another awesome video Jim, thanks again…

@DIYJIM 19 дней назад

Very welcome

@bmacdonald5137 Год назад

Perfect! Just what I needed!

@DIYJIM Год назад

Thanks for watching

@grantgardson 11 месяцев назад

Just acquired a Husq GT2254. Hoping the rest of your videos help me PMCS my new equipment.

@DIYJIM 11 месяцев назад

Hope they help

@grantgardson 11 месяцев назад

@@DIYJIM thanks sarn't!

@berjo77 2 месяца назад

Great to-the-point work. Excellent tips too. Thanks.

@DIYJIM 2 месяца назад

Thanks again

@toniablizzard4058 Год назад

Awesome job explaining this

@DIYJIM Год назад

Thanks and thanks for watching

@rockbay79 2 месяца назад

You always have the best quality videos!!!

@DIYJIM 2 месяца назад

I try, thanks

@peanutsmith1462 20 дней назад

Right up under the very center of the tractor of the front end or pivot side to side there’s also grease fitting

@DIYJIM 20 дней назад

Thanks for letting me know I thought I got them all.

@JerseyDevil26 Год назад

Perfect. Thanks Jimbo.

@DIYJIM Год назад

Thanks

@feelinglikevinyl781 11 месяцев назад

There is also a grease fitting on the center pulley on the top of the mower deck on my FR691V. Cheers.

@DIYJIM 11 месяцев назад

Thanks for watching

@Johnny53kgb-nsa 5 месяцев назад

Good video. Thanks!

@DIYJIM 5 месяцев назад

You're welcome!

@Ratboy2004 Год назад

Thanks

@DIYJIM Год назад

welcome

@steeldrivingtherealstealdriver Год назад

Thanks!

@DIYJIM Год назад

Welcome

@PlasmArtFabricating 10 месяцев назад

Great video! Off topic, but still a maintenance tip. Husqvarna and others recommend using non ethanol fuel/gas. You can find gas pumps that carry it. There is a site that shows on a map which stations carry it. Just make sure which pump, as not all pumps are non ethanol. Ethanol more than 10% will eat your seals, and your engine won't last as long. Some placescall it Rec-90 or recreational fuel.

@DIYJIM 10 месяцев назад

I have started using non-ethanol fuel.

@YogiTheBearMan 3 месяца назад

Not to mention ethanol will gunk up your carburetor and require cleaning

@GApawpawandnana Год назад

I enjoyed the video and learned a great deal. Especially what a Zerk is. I have a Husqvarna YTH 2348 and 24V48 that I’m learning to do maintenance on after my husband passed away. The Lubrication maintenance chart points to the engine, do I grease it also?

@DIYJIM Год назад

You can, they make a White lithium grease in a spray can. You should be able to buy at any auto parts store or a Walmart. Hope this helps.

@jonbedker5229 Месяц назад

There is a Utube video titled. 3 upgrades to your Husqvarna mower. In the video, he shows how to upgrade your wheel bushings to wheel bearings. This will potentially save you hundreds of dollars in the long run. He has the link for the bearings on Amazon in the description.

@DIYJIM Месяц назад

Thanks for the info and thanks for watching

@brianlchase Год назад

That looks like John Deere polyurea grease. I don't know what other grease is green. It has several benefits and you can repack the sealed spindle bearings with it. It won't eat on rubber or plastics. But it's a big pain to switch grease types. Have to clean out all the old grease which means removing tires and king pins. Worth it though, it's such a good product.

@DIYJIM Год назад

Thanks for the info and thanks for watching

@mikeo9219 5 месяцев назад

Great video. Do the rear wheel axles ever need grease ? I just removed the rear wheel to replace a old tire. I noticed the axle and metal washers are dry, is that normal ? Or should I lube it with graphite or something similar ?

@DIYJIM 5 месяцев назад

Maybe a little grease will not hurt

@bobg4657 Месяц назад

That steering gear set-up needs to be sealed & self-lubricated. I spray mine with WD40 every mowing. Makes it much easier to steer when freshly lubed.

@DIYJIM Месяц назад

Thanks for the tip and thanks for watching

@denniswalston1217 Год назад

Just a added note. Do not force extra grease in to the fitting. When you feel the grease gun lever pushing harder, you may damage the grease seal.

@DIYJIM Год назад

Thanks for tip thanks for watching

@grantgardson 11 месяцев назад

Pretty sure he mentions exactly that in the first like 50 seconds. I got you sarn't, Hooah!

@denniswalston1217 11 месяцев назад

@grantgardsson4232 what are you, 7 ?

@strozyvoodoo5395 11 месяцев назад

I don't believe there is a grease seal per se on any of the parts he actually greased.

@harrydoherty8299 10 месяцев назад

use red grease. a little tougher.

@jmac88022 2 года назад

Good job Jim. Jim when i start my mower and release the brake something is growling and sounds bad. Still operates but oike i said it sounds rough. I cant tell if the noise is coming from the spindle off the motor or if its one of the pullies or tranny. I did use it to snow pkow this winter and i was a lil rough on her i guess

@DIYJIM 2 года назад

Sorry you might want someone to look at it. Could be a few things. Belt, bearings, transmission. Hope you get it figured out

@jmac88022 2 года назад

@@DIYJIM thanks Jim,. I will figure it out. No need to send to mechanic. Just thought id put it out there to see if you or anyone knew if it was a common issue. Thank you for replying Happy independence day!

@mrmike7919 2 месяца назад

There are two grease fittings on the deck as well.

@DIYJIM 2 месяца назад

Thanks for watching

@CarlosRodriguez-en5zk 2 месяца назад

Can you make a video showing how to re install the Anti sway bar for the mower deck? 🙏

@DIYJIM 2 месяца назад

Sorry I was my neighbors mower.

@robertskelton2576 2 месяца назад

I see Husky still doesn't use a grease fitting at the front axle pivit. No lube and they wear out. My JD has one but one for the Husky.

@DIYJIM 2 месяца назад

thanks for watching

@markmilini9519 2 месяца назад

My husqvarna has fittings on each blade spindles too ?

@DIYJIM 2 месяца назад

I see others say that, thanks for watching

@davidb8466 14 дней назад

Are the grease fittings placed correctly and angled easy to get at ?

@DIYJIM 14 дней назад

As easy as any on the other small mowers. Thanks for watching

@timlist4173 Год назад

I have a lth1538 riding lawn mower, and the blades will not engage (has the big lever, not the pto switch). Suggestions?

@DIYJIM Год назад

Not sure check cable, check the belt for the blades. Hope you get it figured out

@locutusattanagra3174 Год назад

nice hat

@DIYJIM Год назад

Thanks and thanks for watching

@nomdeguerre8464 2 месяца назад

It's actually recommended to NOT grease the steering gears. That increases the likelihood that debris gets stuck to the gears and causes more problems than non-greased gears. If they weren't exposed then it might make sense.

@DIYJIM 2 месяца назад

thanks for watching and thanks for the tip

@foch41 2 месяца назад

I just replaced the blades, should I spray wd40 or anything on the housing that spins the blades?

@markmilini9519 2 месяца назад

There should be grease fittings on the blade spindles that he did not mention, on top side of deck

@danhogle1776 3 месяца назад

I think mine has them on my spindles too

@DIYJIM 3 месяца назад

Thanks for watching

@danhogle1776 3 месяца назад

@@DIYJIM love your page

@DIYJIM 3 месяца назад

@@danhogle1776 thank you very much. I have improved a lot since I started back in 2019.

@lukasstorie2947 2 года назад

Hey Jim I'm sorry to ask but have you ever had reverse problems i cant reverse when I'm cutting and it just started a couple days ago cant find anything about in the manual and online I just get other ppl having different issues like not going forward or backwards. Anywhy if you know whats going id appreciate the heck out. ya I think i may need a jd person to look at it☹

@DIYJIM 2 года назад

Not sure that mower is my neighbors. If I remember correctly to mow in reverse you had to turn the key in the reverse spot. Maybe something is wrong with where you put your key in. Hope you get it figured out.

@lukasstorie2947 2 года назад

Thanks for the reply buddy I hope I do too

@BruceSkibinski-lt1yc 6 месяцев назад

I have a Husqvarna Riding mower with pedals auto transmission the spring broke to the pedals to transmission To go front words and reverse please help me out T

@DIYJIM 6 месяцев назад

I would make a video of it and post it on a small engine group on Facebook. Hope you get it figured out

@Romidamore1113 4 месяца назад

Hi I have a question, my Husqvarna it’s a little rusted inside around some parts. What should I use to get rid of that rust? Thanks God bless

@DIYJIM 4 месяца назад

Not very easy to get rid of rust maybe try to sand and repaint.

@larrybrown2850 9 месяцев назад

I am having trouble greasing the wheel zerks My grease gun's fexible extension is unable to attach to the zerk. The part that attaches to the zerk is too big to get the correct angle to attach to the zerk. Any suggestions on a special attachment for the grease gun?

@DIYJIM 9 месяцев назад

Maybe just take your grease gun to an auto parts store and see if they could help you. Thanks for watching.

@danjanes8689 Месяц назад

Another option is to replace the straight zerks with 45 degree angle zerks.

@mikeraftis6332 Год назад

Greasing steering will collect dirt in grease.

@DIYJIM Год назад

Thanks for watching

@moss8448 Год назад

What about the belt spindles? do they have xerxes fitting or do they have to be taken apart?

@DIYJIM Год назад

I do not think they have any, I guess you can take apart. If it were me I would not worry about it unless you are mowing a lot of acres of grass. Thanks for watching

@moss8448 Год назад

@@DIYJIM the YTH2348 has two on top of the blade housing one on each side with a 'no step' warning

@moss8448 11 месяцев назад

along with a center spindle that you have to drop the deck to get access...grrr.

@danjanes8689 Месяц назад

Mine has a straight zerk on top of each blade spindle. The center one on some mowers can be tough to connect to. I changed my center one to a 90 degree zerk and it's much easier to connect to.

@moss8448 Месяц назад

@@danjanes8689 good idea that center one is a pain.

@Anarchy-Is-Liberty 10 месяцев назад

I personally wouldn't put grease on the steering gears, they're in the open, and the grease will catch all of the dirt that's flying around under there, and eat the gears up faster! Also, you didn't show or talk about anything to do with the rear end, which leaks grease over time.

@DIYJIM 10 месяцев назад

Thanks for watching

@vladimirdumanovskiy465 Год назад

Does this grease gun require air compressor to operate?

@DIYJIM Год назад

You do not need an air compressor.

@goldenacres3269 9 месяцев назад

Don't the spindles on the mower deck need grease as well?

@DIYJIM 9 месяцев назад

There was no where to grease unless I took them apart. Check your spindles maybe yours are different. Thanks for watching

@goldenacres3269 9 месяцев назад

@@DIYJIM The top of my spindles are zerk fittings. Interestingly, I have a 54 inch deck. There are three spindles. The two outside spindles have zerk fittings but the inside spindle (which you can't get to without dropping the deck) has a sealed spindle.

@danjanes8689 Месяц назад

@goldenacres3269 That's interesting. I greased a 2022 54" mower for my mom last week and it had zerks on all 3 blade spindles. My own 2007 54" deck is the same. I can grease the center spindle without dropping the decks. On the older mower, I did replace the straight zerk on the center spindle with a 90 degree zerk to make for an easier connection.

@terryatpi 2 года назад

Deck spindles?

@DIYJIM 2 года назад

Good question guess you just wait until they wear out. There was know where to grease.

@terryatpi 2 года назад

@@DIYJIM I greased three spindles on a husky mower today. Has factory hole cutouts in the plastic belt guards for the zerk fitting . 23 hp prob 2015

@terryatpi 2 года назад

You probably have a sealed bearing. Idk. Thanks

@danjanes8689 Месяц назад

@@DIYJIMI can see the factory installed zerk on one of your blade spindles in your video.

@nosuchthing369 3 месяца назад

You forgot the pulleys on mowing deck

@DIYJIM 3 месяца назад

Thanks for watching

@healthyamerican Год назад

im pumping and pumping my deck spindles. like 70 pumps until i feel like im wasting my time. is the grease even going in there?

@DIYJIM Год назад

There is a lot of space in there I think your good.

@danjanes8689 Месяц назад

If you're actually pumping greae 70 times in one deck spindle, you should be able to see the grease come out the top or bottom. If not, it's not going in. The zerks can be removed for cleaning or replacement.