Whirlpool Dryer Heating Element WP3387747 - How To Test

Подписаться 64 тыс.

Просмотров 94 тыс.

50% 1

Step by step instructions on how to test your dryer heating element. When the heating element fails it can cause the not dryer not heat. If your heating element is shorted, it can cause the dryer to heat even when the dryer isn't running or calling for heat. This heating element assembly is found on some Whirlpool, Kenmore, Maytag, Amana, & Kitchen Aid model dryers.
Purchase this part from our online store here: partsdr.com/part/3387747-heat...
Whirlpool OEM part number: WP3387747
Parts Dr part number: PD00002365
Tools required:
Multimeter or Ohm meter
1/4" Nut Driver
This heating element assembly replaces these parts numbers:
80003, 3387747, 525502, AP6008281, PS11741416, EAP11741416
Get Social With us!
/ partsdr
/ parts_dr
Check out our appliance repair forum: forum.partsdr.com/
Check out our blog: partsdr.com/blog/
Subscribe to our RU-vid channel: ru-vid.com_c...
If you found this video helpful please click the thumbs up button and leave us a comment below.
#PartsDr #MakeAppliancesGreatAgain #Whirlpool

Хобби

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@robtoma1755 2 года назад

Excellent prices, fast shipping! Clear concise instructional videos. Highly recommended.

@PartsDr 2 года назад

Thank you!

@dannytavarez4837 5 лет назад

Thank you again for that heating element test yes it was to heating element

@PartsDr 5 лет назад

We are glad you found the video helpful! 🙂

@richardlemke286 9 месяцев назад

Spot on. Helped me get all the right info at the right time. Thanks

@PartsDr 9 месяцев назад

Great! Glad we could help!

@dman3290 4 года назад

My element has an ohm reading of 0.9xxx. It heats the dryer well, almost too well. The sides for machine are very hot to the touch after about 30 mins. I have tested both thermistor inlet/outlet and thermal cut off. They all read fine. I guess I am confused because I assume any issue with the heater element would result in no heat, not excuse heat like I am experiencing.

@irishkevin4307 3 года назад

Thank for vid...I did the testing and switch removal without taking out the heating element & housing. I just removed the front two bracket screws and loosened the heating element housing to get at the bad (no continuity) high limit thermostat...so now to check the price, order, and wait...an no I won't be buying from that big conglomerate co. the begins with an "A"...!! They have so much $$ they are now taking rides on rocket ships into space...Jeff how 'bout more philanthropy and helping the less fortunate..!!

@jbburrus21 7 лет назад

I have an odd problem. The dryer will heat for 5-10min into the cycle, but will shut off and the dryer will continue to spin for the remainder of the cycle. but afterwords the breaker has popped and the dryer wont turn on until i reset it. it happens every time i run the dryer

@PartsDr 7 лет назад

This type of problem can be caused by a bad breaker. I would start by replacing the breaker to see if that remedies the problem.

@auletjohnast03638 2 года назад

ON MY WHIRPOOL DRYER I CHECKED THE HEATING ELEMENT, THE THERMOSTAT AND SENSOR OR FUSE PROTECTOR THEY ARE ALL GOOD. WHAT CAN BE THE PROBLEM? COMPUTER BOARD?

@PartsDr 2 года назад

Yes a bad control board could cause your issue. Also, make sure the check the power supply to the dryer to make sure it is getting proper power.

@booostedtc 4 года назад

I thought with ohms if its good it will go to 0

@bradloflin6776 2 года назад

Thank you, it was bad Thermal Fuse. Less than 6 months old, just replaced all the parts (bad element). Wonder why I blew so soon?

@PartsDr 2 года назад

The first thing to check for restrictions in the exhaust venting.

@robertstoeger6188 2 года назад

Unfortunatly I didn't take a picture or mark the wiring and now I can't find anyone to help me...I know how to check every t hing I just need help connecting the wires!!

@PartsDr 2 года назад

The two power wires to the heating element can connect to either terminal.