Kenmore / Whirlpool Dryer Not Heating - Easy Troubleshoot and Repair.

Подписаться 13 тыс.

Просмотров 769 тыс.

50% 1

-Disclaimer
This video is for entertainment purposes only. I am not a licensed appliance repair technician however, I do my own work This video describes how I diagnosed and repaired my dryer after it stopped heating.
-All failed electrical components should be replaced even after a successful reset (fuses, heating elements, motors, etc.).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
This is a thirteen-year-old Kenmore Electric Dryer. Model No. 110.66922501 - Type DDOT-ELE-2406028-CV54. This is a Heavy Duty - King Size Capacity dryer. The focus of this video is to demonstrate how to troubleshoot, diagnose and repair an electric dryer that has quit heating. Even though this is a Kenmore product, the brand is owned by KCD IP LLC, a special purpose entity created by Sears Holdings. Also, as of 2017, Kenmore products are produced by manufacturers such as Whirlpool, LG, Electrolux, Panasonic, Cleva North America, and Daewoo Electronics.
The main symptom of this malfunction that became apparent:
-The dryer continued to run as usual however, the clothes were coming out wet and cold.
----------------------------------------------------------------
Amazon Affiliate Links:
Cen-Tech 11 Function Multimeter: amzn.to/2XIiJ66
Cen-Tech 7 Function Multimeter: amzn.to/2tNMQvm
Blackweb 66" Tripod: amzn.to/2XAOFtg
----------------------------------------------------------------
The following products were used in the making of this video:
Replacement Parts:
*1. Thermal cut-off kit (thermal cut-off fuse kit) This kit includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse with a limit of 360 degrees Fahrenheit. The thermostat and fuse help prevent the dryer from overheating.
Part #EAP334278 or #279769 CUTOFF-TML.
2. Thermostat, internal-bias (internal bias operating thermostat) The cycling thermostat with internal bias heater will continually cycle the heating element off and on to maintain a constant inner temperature in the dryer. This cycling thermostat has a limit of 155 degrees Fahrenheit and a differential of 25 degrees. Meaning that the heating element will cut out at 155 degrees and cycle back on once the internal temperature drops by 25 degrees.
Part #EAP11741405
3. Thermal fuse (non-resettable) thermal fuse. This was the elongated white fuse adjacent to the thermostat with the two blue wires.
Part #EAP11741460
4. Heating Element - 240v 5200w
Part # EAP11741416
* = Replacement parts used in this video.
Equipment Used in this Video:
- iPhone 7 Plus - 128 GB
- iPlanet Bluetooth Selfie Stick
- Blackweb 66" Tripod
- Craftsman tools
- Multimeter: Cen-Tech 11 Function Digital Multimeter with Audible Continuity. Cen-Tech®- Item#61593
---Please know that I am not an authorized appliance repairman and this video is only published to demonstrate how I went about diagnosing and repairing my Kenmore electric dryer.
---This video is for entertainment purposes only.
---ALWAYS PUT SAFETY FIRST. ALWAYS UNPLUG THE APPLIANCE BEFORE OPENING THE CABINET OR DOING ANY TYPE OF SERVICE TO THE UNIT.
==========================================================
Follow Smokin with Kasket on Social Media:
Instagram - / smokinwithkasket
Pinterest - / wskasper123
RU-vid - ru-vid.com...
---------------------------------
Click here if you are interested in supporting our channel: Smokin' with Kasket
www.paypal.me/AmazingBBQ
Thank you for your support. All donations are used toward this channel and its content.

Хобби

Опубликовано:

22 янв 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1 тыс.

@geraldstrader5216 4 месяца назад

I just diagnosed that the thermal cutoff was bad on my daughter's vintage Kenmore from your video. And on top of that I smacked it on my desk a couple times and boom! continuity was back. I literally fixed her dryer for $0 Nada. Awesome video and its still totally relevant.

@SmokinwithKasket 4 месяца назад

That is so awesome to hear. I’m glad it worked. I would still recommend replacing that fuse with a factory reset fuse. Thank you for watching and hopefully subscribing. I’m glad this video was helpful for you.

@k.t.chayse6241 7 месяцев назад

This guy is amazing. I am 63 old lady and was able to fix this on my own. You rock dude!

@SmokinwithKasket 7 месяцев назад

What an awesome comment!. I am so glad to hear that this video was helpful to you. Thank you for watching and hopefully subscribing. Stay safe.

@karlbarner6555 Год назад

SUCESS!!!! Replaced both the thermal cutoff (2nd time) and the associated 250 Degree Thermostat this time. The thermostat was the original culprit and that's why the thermal cutoff failed a second time. Working great now. That is why they sell them as a pair. Thank you WK for an awesome and concise DIY video. You ROCK!

@DeHartmann9 4 года назад

Super incredibly helpful! Not only was I able to fix my dryer with the help of your excellent video, but I also learned a lot! Bravo sir, and thanks!!!

@SmokinwithKasket 4 года назад

Awesome to hear. Thanks for watching.

@joemartinez9430 5 лет назад

Great video! This was exactly what I needed in order to diagnose and repair my dryer. You saved me lots of time and money vs. calling a repairman. My only problem came from not taking a picture of the wiring when I disconnected. I was able to pretty easily trace wires back and paused your video to see where they all connected. Thanks and keep them coming! ✌🏼

@SmokinwithKasket 2 года назад

Im sorry I missed your post. Thank you for the kind comment and I’m glad to hear this video was helpful. Happy New Year and have a safe 2022.

@vineyard950 2 года назад

I just ordered a thermal fuse as I found that mine was bad and dryer not heating, then I watched your video and was amazed how you walked us thru the process of checking what the problem. The best part was at the end when you showed how to reset the fuse. Once I did what you demonstrated in the video I reinstalled it in the dryer and it started heating. My wife was not happy, she thought she was getting a new dryer. BTW, the Kenmore dryer is 29 years old and outside of the door switch this is the only thing that went wrong on this dryer. Thank You A Bunch!

@SmokinwithKasket 2 года назад

Hi Chuck, I’m glad my video was helpful and you were able to repair your dryer. That dryer is 29 years old and I’ll tell you they don’t make them like they used to anymore. Try to keep that thing running as long as you can. Thank you for watching and hopefully subscribing and you and your family have a merry Christmas and a happy new year! Stay safe!

@steveloffredo771 2 года назад

You keep it simple and make it so that any one watching understands. Its not about you but about getting the message across on how to fix it. Glad I found you. Cheers

@SmokinwithKasket 2 года назад

Thank you. Appreciate that comment. Stay safe!

@itsxtra8144 5 лет назад

Amazing! I already knew my thermal fuse was bad so i got a new one, but this video still helped me to learn something new. That reset trick is by far the best thing I've seen. 👏🏼👍🏻

@SmokinwithKasket 5 лет назад

Awesome Jorhan. Glad this video was helpful to you. Thank you for watching. All the Best-

@daleg5553 4 года назад

@@SmokinwithKasket resetting that fuse always works?

@mopiplayer 4 года назад

@@daleg5553 Well..it too a couple of good thumps... but it did the trick...you might want to put it so that the little hook at the top is over the edge of the surface you are going to strike... making the strike a bit better.

@MrRondonmon 3 года назад

@@SmokinwithKasket That's pretty high brother, my kit came with the Heating Element, both of those parts via Amazon for 28 bucks. I will link it below in case anyone here needs the Heating Element also. Of course, yours is a different model, but the prices can't be that different. www.amazon.com/gp/product/B0829K9XCJ/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

@glena6709 3 года назад

AMAZING tip at the end to reset the thermal fuse! If I can do that, I can have a temporary fix while I wait for my part to arrive, and my tenant will be extremely grateful! Thank you so much for helping to keep our rents affordable. Glen Moore Seattle WA

@SmokinwithKasket 3 года назад

Thank you for watching commenting and supporting. I’m glad you found this video helpful. Stay safe and healthy.

@sharoneburris7974 4 года назад

Thank you for the great video. Made the repair so simple, and made me look like a hero to my wife.

@SmokinwithKasket 4 года назад

Great yo hear. Glad I was able to help. Stay safe and healthy. All the Best -

@njnahas 2 года назад

William, I can’t tell you how grateful I am. I watched your video after my dryer stopped heating. I bought a multimeter and checked the fuses, cut off switches and heating element like you showed. The heating element didn’t beep, so I removed it and found a break in the coil! I’m waiting for my replacement part to get here tomorrow and I should be back in business. Your guidance was invaluable and your video was very thorough and easy to follow. Thank you!

@SmokinwithKasket 2 года назад

I am so glad to hear that you had success fixing your dryer with the help of my video. Thank you for watching and subscribing and have a merry Christmas and a happy new year!

@TechTravelBeyond 4 года назад

Thank You! This dryer is exactly like my mom's dryer which stopped heating, and so she sent me the model number. I bought a kit with both thermal cut-off kit (like you showed), dryer thermal fuse, thermostat cycling switch for $14. I tested the parts disconnected from wiring and only needed to change the thermal fuse you showed because it had no continuity. It only took me 15 minutes, and the dryer works! I cleaned up everything and it looks like the outside flap on the exhaust outlet outside the house caused the backup and excess heat. I reset the old one and saved it with the other parts. Saved us lots of money and time!

@elysegambino1597 Год назад

You saved our dryer!! And possibly a marriage! This was so thorough and perfectly narrator for the absolute beginner. Can’t thank you enough. I know it was long ago but I hope those ribs were delish!

@SmokinwithKasket Год назад

Awesome to hear that this video was helpful! Thank you for watching and commenting, and hopefully subscribing. Appreciate your support! Stay safe and healthy!

@wizzardgame8343 Год назад

losing a marriage over a dryer? you are a loser

@jeffsullivan5818 4 года назад

I can't thank you enough! We have the same model and this video was a life saver! Many, many thanks Mr. Kasper!!

@SmokinwithKasket 4 года назад

Jeff Sullivan- Awesome. Glad it was helpful. Thank you for watching. Please subscribe. Happy Holidays.

@1031longhorn Год назад

THANK YOU! I watch lots of DIY videos on YT and your video nailed it for me. My wife told me that the dryer wasn't working. Did my YT due diligence and found your video. About 90 minutes later the dryer was running again. It took me longer to find my tools than to do what you recommended. THANK YOU!

@SmokinwithKasket Год назад

Hey there, Steve, I am so glad to hear that my video was helpful for you. Thank you for sharing and hopefully subscribing. Have a Merry Christmas and a Happy New Year and stay safe!

@kmosker Год назад

Thank you! Thank you! Thank you! I fixed my dryer with your fantastic advice!!! God bless you and your family with all the goodness you deserve!

@nathansoriano4050 3 года назад

Thank you Will for clearly explaining the steps in an easy to follow guide

@SmokinwithKasket 3 года назад

Hi Nathan. Thank you for watching. Hope you were successful in your repair. Glad the video was helpful. Stay safe.

@phlyonwall 5 лет назад

What a great video! I've done this before, but it's been about 15 years, and your tutorial is spot on. Thank you for taking the time to record and post it -- I know it took effort, much appreciated. BTW, we bought our Kenmore washer and dryer in 1993 and they are both still working, albeit with a few do-it-yourself repairs over the past 26 years. I'll keep these until they are DEAD and no longer resurrectable!

@SmokinwithKasket 5 лет назад

Thank you sir!!! Appreciate your kind words. Its very true - was a lot of effort and extra work to video and post but I enjoy offering help to others as others have helped me over the years. These Kenmore appliances are really amazing machines. This Kenmore washer and dryer have chugged through well-over a decade of my wife and I doing foster care (fostering over 27+ kids and adopted 5 plus two of our own biological children). The amount of clothes and blankets and uniforms and throw rugs that have been washed over the years are mind boggling. The workmanship and quality are truly amazing and as of today, these machines show no signs of failing. All the Best and hope your machines continue to Chooch along for many more years.

@DisneyMagicwithForti 3 года назад

Totally reset my thermal fuse and it worked again. Your video was easy and to the point with great camera angles. Anyone with no experience can try it with your walkthrough. Not the same model Kenmore however the parts you showed were easy to find and diagnose. Thanks again.

@SmokinwithKasket 3 года назад

Awesome to hear! Sometimes I wonder if my videos are clear and easy to follow. I don’t always feel like I explain things clearly. Thank you for the kind comment. I’m Glad this video was helpful. Stay safe.

@zee7333 5 лет назад

I can’t believe your resetting technique worked!!! I was blown away by that !!! I ordered a new part , but meanwhile I ( my wife 😉) can use the dryer. Great job with the video thank you for taking the time to do that. 👍

@SmokinwithKasket 5 лет назад

Great to hear the video was helpful. All the Best!

@vden02 3 года назад

Hey thank you! You helped me fix my dryer. I'm 55, a female and very handy and now I know something new! Edit...the exact same one was the bad one, I followed your instructions on resetting it and it worked! Will help till the part arrives.

@SmokinwithKasket 3 года назад

That’s great!!! I’m so glad this video was helpful. You saved $$$ and that’s always a good thing!!! Thank you for watching and subscribing. Stay safe.

@tubetop36 4 года назад

Hey Kasper, thank you for showing the 5 different locations to test, unlike the other 12 videos that only show the usual 3. Your teaching style is excellent and camera quality is superior!!!

@SmokinwithKasket 4 года назад

tubetop36 - Wow - thank you for the awesome compliment. Unfortunately I don’t feel that I teach well or use the camera well either. I appreciate the positive reinforcement. I’m glad this was helpful and surprised other videos don’t cover more on this. Please browse my channel and subscribe if you find my content interesting. Glad to be of assistance!!! All the Best and Happy New Year!!!!

@tubetop36 4 года назад

@@SmokinwithKasket is the best. My heating element is now glowing bright orange thanks to him!!!

@saadiamalik7417 3 года назад

I fixed my dryer by looking this video and it was exact same problem and your bonus tip saved my time and money. Thank you so much! Great Video!

@SmokinwithKasket 3 года назад

Thank you for the awesome comment. I’m very glad this video was helpful. Please subscribe if you haven’t already. Stay safe and healthy!!!

@marshalabarca9026 Год назад

I have a 22 year old dryer Kenmore Series 90. Still ran but no heat.. Your video is excellent....you clearly show what you are doing every step of the way. It was very helpful to see all of the parts that affect dryer's heating and how to test. I had watched other videos and all said first change thermal cut off fuse. Did that and still no heat. Then found your video and after testing all heat related parts for continuity, found it was the heating element. Everything else was OK but ordered full kit for $32.99 on Amazon. Replaced and are now back in business. Thank you.....saved us lots of money, too. Don't need a dryer with wifi.....last time I checked, my phone lacked the ability to remove clothes from washer and place in dryer....!!

@SmokinwithKasket Год назад

Great to hear I was able to help. Thank you for watching and commenting, and hopefully subscribing. Have a great day!

@mikegreen7108 4 года назад

Would make a good teacher. Goes through and explains things so you can remember. Great video

@SmokinwithKasket 4 года назад

Your too kind!!! I don't feel I'm a good teacher though. Glad this video was helpful. - All the Best my Friend!!!

@garysmith2890 3 года назад

@@SmokinwithKasket to

@sunpowerlink 4 года назад

Best trick I have learnt in a long time to reset the thermal fuse, thank you.

@SmokinwithKasket 4 года назад

Glad you liked that. Hope it will be helpful one day. All the Best-

@damianlue9206 4 года назад

Thank you so much. Excellent instruction, learned how to check the fuses and changed out the heating element. Showing how to reset the fuse was such a big help. Was able to reset the fuse to run temporarily til new parts came. Tripped a couple times. Old heating element was getting too hot. Dryer is running great now. Thanks again.

@SmokinwithKasket 4 года назад

Great to hear. Thanks for your kind words and support. All the Best - Stay safe and healthy!!!

@MrJoebiz24 5 лет назад

William, brilliant bonus tip! Had just replace high temp thermostat 2 days ago. It went out again. (Everything cleaned prior to replacement, every component tested). Your reset trick worked, so far. Thanks!

@SmokinwithKasket 5 лет назад

Great to hear. Glad this video was helpful.

@michaelcross6251 4 года назад

Mr. Kasper, That's just amazing to see how to reset the thermal fuse. You're simply awesome :) Thank you

@SmokinwithKasket 4 года назад

Thank you for watching. That is a cool trick isn’t it? Stay safe and healthy.

@michaelcross6251 4 года назад

@@SmokinwithKasket , are you a professional electrician or do it as your hobby? The reason I'm asking because I love fixing anything broken. I am a student rn majoring in Mechanical Engineering. Love to have a mentor like you if you don't mind.

@albertfrolander2076 4 года назад

I'm going to try it right now, I hope it's the same procedure for the gas dryer

@mkfreel 4 года назад

Excellent tutorial. We have the same dryer so this was just what I needed. I’ve only been a homeowner for ~5 years but thanks to videos like yours I have found that there is a lot you can do to fix things before paying someone or buying new.

@SmokinwithKasket 4 года назад

Great yo hear!!! So glad this vid was helpful for you. Please be sure to subscribe. Best wishes and stay safe and healthy!!!

@mkfreel 4 года назад

William Kasper So to be clear, the 3rd thermal cutoff (the white one you had to check off camera) had continuity the same as the other 2 correct? That’s the one I’m not getting a tone on. The other 2 and the heating element are all good.

@philschnetzer 3 года назад

Wow, that reset trick actually worked for me, thanks! And, bonus, I found out my ducts were pretty clogged up so gave them a good cleaning. Superb video!

@SmokinwithKasket 3 года назад

Great to hear. Glad this video was helpful plus you may have saved yourself from a catastrophe with those clogged ducts. Stay safe and healthy!!! Best-

@timwilliams2554 2 года назад

Thanks for sharing! I had the same issue as you did. I never used a multimeter before and I purchased the $5 one from Harbor Frieht tools. I'm glad you showed what else to check for future references. The reset method worked for me but I'm going to buy another cut off switch. RU-vid is the best!!!

@lindseygrimes9596 2 года назад

Very helpful video No BS, right to the point and with any added info being so very useful & necessary!! Appreciate you!

@SmokinwithKasket 2 года назад

What an awesome comment and I am happy to hear this video washelpful. Thank you and stay safe!

@twolifes2live4 5 лет назад

The beat video by far and i was just about to give up and pay someone. Thank you very helpful information.

@twolifes2live4 5 лет назад

Waiting on my new parts and I'll let you know how it turns out 👍👍

@SmokinwithKasket 4 года назад

@@twolifes2live4 Great - Please keep us informed. Best of Luck-

@mrrubot4678 4 года назад

By far and not even close!

@vicvalour7831 3 года назад

Yes, thank you for mentioning investigating why cutoff went, my exact problem, no other vids even mention it, and close up on wires so I can put them back proper. Appreciate

@SmokinwithKasket 3 года назад

Wow! Thanks for the awesomely kind comment. I’m glad this video was helpful! Stay safe and healthy.

@michaelzarbo3616 4 года назад

You are the man. Dryer needed a cleaning and thermal disc needed to be reset. Everything else checked out perfect and the dryer is working great. My wife thinks I'm "The Man" again thanks to you.

@derbyd10 Год назад

My Elite HE3 stopped heating. I found the full diagram and parts numbers online and replaced everything since I had the unit open. Thermistor and fuse on the blower housing. Heat element, cutoff and sensor on heater housing. Each was available separately but I bought the kit. Saved hundreds of dollars.

@SmokinwithKasket Год назад

Sometimes it’s better to replace more now then waiting till each component fails. Thank you for sharing.

@mark19g 3 года назад

Thanks!!!!!! 👍🏾 you helped me figure out the issue with my dryer just now. Great Video

@SmokinwithKasket 3 года назад

Awesome!!! So glad it was helpful. Thank you for watching and commenting.

@annas8460 3 года назад

I really appreciate how many times you emphasize unplugging the dryer BEFORE anything else.

@SmokinwithKasket 3 года назад

Hi Anna. Thank you. Just want to make sure people understand that’s a lot of voltage (240v) and it will kill!!! Hope the video was helpful for you. Thank you for watching. Please subscribe if you haven’t already. Stay safe and healthy.

@MrSoccerpues 29 дней назад

Thanks for the video, very helpful. New subscriber

@jennyhippy 4 года назад

Thank you, thank you, thank you, thank you!!!! We are trying to help the planet by fixing existing appliances instead of buying new and resources like this video make such a difference! Even though the space is hard to get into I could still see everything clearly. Thanks for taking the time to post this!

@SmokinwithKasket 4 года назад

Jennifer Holub - Thank you for the positive response. I appreciate you taking the time to watch.

@bobirish8936 2 года назад

This was incredibly helpful. I just assumed I needed a heating element. Didn't Needed a new thermal fuse. He showed how to reset the fuse that was bad and I did and now have my dryer running again. I ordered a new set of fuses to have on hand if this pops up again. Very well done video.

@SmokinwithKasket 2 года назад

Thank you for watching and I’m happy to hear this video was helpful for you.

@Kingsnut 4 года назад

Regarding thermostat, testing at room temperature can give you continuity and you will think the part is fine. You also need to check to make sure it turns off at like 175 degrees too. So you need to put on hot plate at 175 and make sure it turns off and continuity stops. Mine did not turn off and was probably the cause of the thermal fuse going bad. It is always a good idea to change the thermostat at the same time you change a thermal fuse otherwise you will just keep blowing thermal fuses if the thermostat is bad.

@SmokinwithKasket 4 года назад

Great advice. Thank you. Appreciate your comment and support.

@kevinswanton7172 Год назад

Very good video I like your little trick to reset the breaker. Excellent.

@SmokinwithKasket Год назад

Thank you for watching and sharing.

@dashaunaallen7022 2 года назад

I've been trying to figure out how to both test for continuity with so many multimeters,removing switches and fuses, pulling the dryer in out up and down for a week all with only one arm and this is the only video that showed me exactly how to do everything. Thank God! now I cannot cancel my repair appointment. Considering just replacing all the parts that came in the kit or leaving it be

@SmokinwithKasket 2 года назад

Thank you for watching And I’m glad to hear that the video was helpful. I appreciate your comments and your subscription hopefully. Have a merry Christmas and a happy new year! Stay safe!

@justinhoward766 3 года назад

William I just wanted to thank you from the bottom of my heart. You have saved some hard earned money at a time when money is tight. I just did your 'hack' where you smack the thermal cut off on the ground to re-set it, it worked perfectly. Once again thank you soooo much Knowledge is indeed power. Hope you have a great day.

@SmokinwithKasket 3 года назад

Hi Justin. I’m thrilled you were able to save some money. I don’t know how we lived without RU-vid. Its saved me so much over the years fixing things. This is my way of giving back. Please subscribe if you haven’t already. Thanks fir watching and leaving your comment. Much appreciated. Stay safe and healthy.

@jeremywillis4124 4 года назад

That last bit on resetting the fuse was a life-saver... "If for some reason you can't get to a parts store" - Yep. Quarantined.

@SmokinwithKasket 4 года назад

Glad that was helpful.

@spacepresidentmcawesome4287 4 года назад

Same part, same trick. This guy saved me at least $45

@FelonyVideos 2 месяца назад

You can safely reset that non-resettable fuse by slamming it on the floor. You think I am joking...

@kevinstraus1478 2 месяца назад

Just did the slamming on the floor thing an hour ago lol

@YourFlashCards Год назад

I just used your video last night to help take out these parts! Now I ordered a new set and I feel confident putting the new ones in. Thanks so much for this helpful video!

@SmokinwithKasket Год назад

Such good news. I’m glad this video was helpful for you. You’ll definitely be able to fix your issue. Be sure to unplug!!!! Best of luck-

@YourFlashCards Год назад

@@SmokinwithKasket I gotta update! It is all fixed now!!!!! Amazon sent me bent parts at first so I had to wait for the new ones but I did it yay!

@davidburke7240 2 года назад

Using this video, I just repaired my Kenmore--and it is heating again! $35 instead of $250!! Thanks so much.

@SmokinwithKasket 2 года назад

That’s great to hear!!!!!

@MEANSTREETAUTO454 Год назад

What would we do without RU-vid ?

@SmokinwithKasket Год назад

I know it. RU-vid bailed me outta of problems many times!!! I’m happy & blessed to be able to create content and share with everyone. Thank you for watching, commenting and hopefully subscribing. Stay safe!!!

@Horace1993 6 месяцев назад

Be broke af

@olivertaylor8788 4 месяца назад

Thank you u tube

@ElChile2010 5 лет назад

The best tutorial ever. Thanks for the great and clear explanation . Click the thumb up button if you agree ..

@SmokinwithKasket 5 лет назад

Thank you. Glad this was helpful.

@robertboyd8707 4 года назад

Hi Mr Kasper. Thanks a million for the hints, especially with resetting the switch, saved me a few dollars! Got the dryer, a Kenmore 110.60802990 (the heater and thermostats in the back but in similar order to your machine). Also double checked and cleaned it for lint that was missed before. Thanks again!!!

@SmokinwithKasket 4 года назад

Great to hear this was helpful. thanks for watching. stay safe and healthy during these times. All the Best-

@danielgarcia2280 2 года назад

Thank you Mike... hell of a guy showing how to fix this problem and not to mention that small trick .thank you again God-bless.

@Rose-oak-cake 3 года назад

I'm just amazed at how clean yours is. mine was littered with lint.

@SmokinwithKasket 3 года назад

Yes it is interesting how appliances differ inside with regards to that. We’ve done foster care for years with a house full at all times. This washer and dryer have been out through their paces!!! This not a gently used dryer!!!

@bellcovid9785 3 года назад

@@SmokinwithKasket ppl

@cocowawa1010 3 года назад

In video min 14:08 looks like your heating element wire is ground shorted to heating element case . That will cause heating element to be glowing all times while dryer is running. Hence fuses blow . Please test continuity between heating element wire and heating element case.

@SmokinwithKasket 3 года назад

Hello. I looked and couldn't see what you were seeing. I can tell you that I tested the leads and the case for a short and it was negative. The coil did cycle during this test. I'm thinking it was an angle that made it appear the element wire was making contact but I had no indications that was occurring. thanks for watching. I do appreciate your input. Stay safe!!!

@boogs6355 5 лет назад

I just want to thank you so much for this video. Got me an ohm reader to add to my tools and had the same problem you had. Really clear instructions and nice that you checked everything. I did the same. Keep making good content. Thanks again really appreciate it. Saved me a bunch of $$$. -Jon

@SmokinwithKasket 5 лет назад

Thank you Jon. Appreciate the positive comments. I'm glad this video was helpful and was able to save you money. All the Best!!!!

@billcallahan9303 4 года назад

Thanks for that last top secret tip. Could be my problem! I have a big Harbor Fright meter too. The buzzer never worked but that's normal for Harbor Fright. Thanks again!

@glena6709 3 года назад

Glen here again... I tried your magic trick with the smack-reset, with nothing to lose, and potentially scoring points for effort with my tenants. The reset worked, as evidenced by my Fluke multimeter. However, the fix did not last until I reassembled the unit. Dang. I would never consider the "reset" trick as a permanent fix, for lack of trust in the long run, and I hate rework more than work. But absolutely, worth the try, especially since buying parts these days for the individual is a major challenge. I appreciate so much what you are doing here : thank you so much. Glen Moore Seattle

@SmokinwithKasket 3 года назад

Thank you for watching and commenting. I agree that if you use the reset trick, you should probably consider getting a new part in the near future. However, I have reset mine once before and that was a couple years ago and it is still functioning. This will definitely get you out of a bind if you’re unable to get your hands on any parts. Stay safe.

@mdorn99 4 года назад

While I don't have the same model, had to access by the back, my thermal sensor was exactly the same and was bad too. Reset it just like you did, now we'll be set until our new washer/dryer is delivered in a couple of weeks!!! Thank you so much for the video!

@SmokinwithKasket 4 года назад

I'm glad this video was helpful. Thank you for your kind support. Hope you'll love the new appliances. Stay safe and healthy!!!

@danielhostetler5387 4 года назад

Thanks for the well laid out information. One comment I received from a tech when I had to have my timer replaced: he said to NEVER turn it counter-clockwise, because that's what tears them up. Always turn them clockwise.

@SmokinwithKasket 4 года назад

Thank you for your support and comment. Great tip by the way. Stay safe and healthy.

@alext8828 3 года назад

Very good explanation. I'm in the process of working on my dryer as we speak. Thank you.

@shainavanhoose3953 4 года назад

Thanks for that trick at the end!! I have the same model and mine quit heating a few weeks ago. With a toddler & no laundromat it's like a lifetime. Hoping I can check everything out tonight after bedtime and get it working 🤞 awesome video!

@SmokinwithKasket 4 года назад

Thank you. Appreciate you watching and glad to hear this video may have helped. Let us know what components were faulty. All the Best-

@philippebelanger3138 4 года назад

Thanks man just made my day. I was able to fix my dryer with you vid. Liked it straight to the point with good details.

@SmokinwithKasket 4 года назад

Great to hear. Glad it was helpful. Please be sure to subscribe and check out my smoking vids. All the Best!!!!

@madgemccoy573 4 года назад

Thank you so very much. I just got this 2nd hand and so I’m learning. Excellent video. Now I need one on how to clean the vent portion under drum and stuck past the lent screen!

@jamesharris-ib7wt Год назад

Thanks so very much for your time and expertise in helping do basic troubleshooting ,on the household dryer 😊

@skelthouser2730 4 года назад

Excellent camera work, some of the best of seen. Well done! Thank you

@SmokinwithKasket 4 года назад

Wow! Thank you for the compliment. Much appreciated. Hope this video was helpful. Thank you for watching.

@stang123able 3 года назад

Thank you for making this extremely helpful video. I bought a used dryer that's very similar to yours but the previous owner did not tell me the timer intermittently freezes on 5 minutes which lets the dryer run continuously. Well I got the unit home and put a load of cloths in it and fell asleep. Won't you know the dryer was on all night! The dryer still works but will not heat anymore. I ohmed out all the parts you talked about and found a bad heating element. Ordered a new one and replaced it within 20 minutes. Thanks again for this wonderful video. I will have to address the timer issue one day but other then that the dryer works great.

@SmokinwithKasket 3 года назад

So glad this was helpful. Thank you for watching, commenting and supporting. Stay safe and healthy.

@lauravitullo2283 4 года назад

I just want to thank you so very much for making this video! I was told my heating element went out and it would be costly to buy the part and have a repair man to install it.. Luckily, your video was next after the heating element one and I immediately testing the parts you said. Turns out it was the thermal cut off and I did buy the set even though it was the back one that was faulty. I even tried to reset it as you said, but no luck. The parts cost the same as in your video and I repaired it myself! My only complaint is; why the hell are the parts on the left side when most people are right handed?!? So, I did struggle putting the bolts back on. THANK YOU! THANK YOU! THANK YOU!

@SmokinwithKasket 4 года назад

Thank you for watching and I’m glad this video was helpful. You are right!!! About the parts opposite the right hand! Lol!!!

@Nonotkidding 4 года назад

I always like an 'extra' help fix ... the heat sensor fuse 'reset' ... Excellent ! Great video, thanks, Mr. Kasper, Jon

@SmokinwithKasket 4 года назад

This is an Interesting fix isn’t it? I learned that from an old-timer repairman many years ago. It really does work! Glad this video was helpful for you and appreciate your positive feedback. Happy New Year Jon!!!

@Kevin-cb9wq Год назад

Thanks for making such a concise and thorough video! As other have said, this video took all the mystery out of every aspect of the job, with great narration and quality production! Liked and Subscribed my fellow troubleshooter! Liked and Subscribed!

@davenarloch1478 4 года назад

thanks William i appreciate your time, effort and knowledge of dryers. thanks for putting this vid together. keep up the good work!

@SmokinwithKasket 4 года назад

Thank you for watching. Happy New Year!!!!

@lawrencemoaton7966 4 года назад

Thanks for the tip on resetting the thermal fuse. The part store closed before I could get to it. This helped buy me a few days in drying delay for my family as it was the weekend. Thanks again for the tip.

@SmokinwithKasket 4 года назад

Glad this was helpful. Thank you for watching. Stay safe and healthy.

@jeanrobillard2865 4 года назад

I slammed the little fuse like you showed us and after the fourth try it was reset and now the dryer works, thank you so much! Cleaned out the filter too!

@SmokinwithKasket 4 года назад

Great to hear. Thank you for watching. Stay safe.

@lonewolf_521 Год назад

Thanks. This video guided me in replacing the heating element in my Kenmore dryer. Not same model but very close to yours. Total cost $23 (Amazon) and 1-2 hours of my time. Worked wonderfully. Appreciate you! 🍻

@SmokinwithKasket Год назад

Thank you for watching, commenting and hopefully subscribing. I’m so happy to hear that this video was helpful for you. Stay safe, my friend!

@Roufam_photog 3 года назад

Great video. That little extra tip at the end worked like a charm.

@SmokinwithKasket 3 года назад

Great to hear. Thanks for watching and commenting. Stay safe!!!

@rashadbracy5938 2 года назад

Great video especially the bonus at the end on how to reset the thermostat thank you for your help bro

@bosteele6000 4 года назад

U the man last bonus was my fix couldn't believe it.. wife and kids very happy

@victortrinidad5588 Год назад

I am a DIY Homeowner this video is very informative right before i troubleshoot my Kenmore dryer. Thank you.

@SmokinwithKasket Год назад

Glad this was helpful for you. Stay safe!!!

@banjosforbreakfast6086 4 года назад

This is the ONLY video or tutorial Online I could find with a dryer identical to mine. Sure enough, the thermal fuse was not passing current. It continued to blow after resetting and replacing, so I looked at the heat element to see if it was grounding out. It looked okay. Then I started blowing lint out of the vent system with an air hose, working my way back to the exterior vent hose in the side of the house. A bucket of trash and one mouse nest later, I am back in business. If the fuse continues to fail (not sure that is the right word, since it is doing it's job) at least I can keep resetting until the core problem is identified, THANKS TO YOU!!!

@SmokinwithKasket 4 года назад

You should have good air flow now. You should be in good shape. Glad this was helpful. Stay safe and healthy. Best-

@johnnysilva8775 2 года назад

Loved your video. I thought I had a bad element. it turned out that I had the same issue as you. I didn’t have the part, so I did what you did at the end of the video and hit it a few times on the floor and sure enough, the multimeter beeped when I tested it. Thank you very much. I had to pull the entire housing out so I could test everything easier. That was pretty easy, though. I just turned it to the left and it came right out. 2 thumbs up!👍👍

@SmokinwithKasket 2 года назад

Great to hear the video was helpful. Thank you for watching.

@renehasbani8937 2 года назад

Expert advice, tips and clarity. Eye opening. Awesome job! Thanks

@SmokinwithKasket 2 года назад

What a nice comment. Thank you so much. I’m glad this video was helpful and I hope you were able to resolve your problem. Thank you for watching and commenting. Have a great day!!!

@jw_diversified5771 4 года назад

My girlfriend thinks you're a superhero.. we have a newer model Kenmore dryer series 100, but you're reset trick for the high limit fuse is pure gold. New part is on the way but til then we can still use the dryer...no more clothesline.... BRAVO!!!

@SmokinwithKasket 4 года назад

Awesome!!! Glad the video was helpful.

@16Tango 4 года назад

Your reset trick saved the day today. I am ordering new fuses but until they come we can still use the dryer, thanks.

@SmokinwithKasket 4 года назад

Glad I could help

@boboclown3810 6 месяцев назад

Thanks for the video. It was very helpful. I was able to replace my heating element (and door switch); I'm reasonably handy with fixing appliances, but this made the task much easier and faster. Knowing how to troubleshoot the other switches and thermostat was useful in narrowing down what was wrong.

@SmokinwithKasket 5 месяцев назад

That’s great news. Thank you for watching. Commenting and hopefully subscribing. Stay safe.

@Okie-Tom 5 лет назад

Very nice video. My old Kenmore dryer has just started blowing cold air. Gotta investigate tomorrow. Thanks. Tom

@SmokinwithKasket 5 лет назад

Glad this video was helpful. Hope you were able to get it back up and running. All the Best-

@rstephe 2 года назад

Thanks for sharing. I always thought the bad fuse was garbage and I had to wait on parts. Now I will at least try to reset it until parts come in. BTW, mention of firing up the smoker and getting ribs on had me glued. Lol!!!!

@Kalkaekie 2 года назад

Watched this video 2 years ago. Just watched it again. Good video !!

@SmokinwithKasket 2 года назад

Great to hear. Hope it was helpful for you. Thank you for your support.

@JuanMartinez-hu6jk 4 года назад

Great video! The high temp thermal switch was the problem... Smacked it on a floor. Checked continuity, put it back in and the dryer is working again. I also checked for obstructions and couldn’t find anything noticeable. Thanks!

@gregorypiercesr.794 2 года назад

Great video! It's been a long time since I reset one of the thermal overloads, Thanks again for being clear on the repair. 😉😉

@SmokinwithKasket 2 года назад

Glad the video was helpful. Stay safe!!!

@louisz8951 2 года назад

Thanks. Your videos are at the right pace to follow.

@SmokinwithKasket 2 года назад

Awesome to hear. I really appreciate your input! Hopefully you subscribed I have some great recipes and some great ideas and reviews coming soon. Thank you. .

@Patrick-888 3 года назад

Thank you. A detailed DIY and I learned how to check for continuity and where to get a decent multimeter

@SmokinwithKasket 3 года назад

Glad the video was helpful for you. Thank you for watching.

@spraym88 4 года назад

I tapped that fuse/ thermol resister on the ground lightly 4 to 5 times and BAMM.. The heat element fired up. Thank you Sir

@devonsalmon7554 2 года назад

Good morning. Thanks for your videos. I like the way you explain the issues. Please continue to give us similar videos. I have already started to spread the news about you and your videos. Thanks.

@SmokinwithKasket 2 года назад

Thank you. So glad you liked my video. Please subscribe if you haven’t already. Warmly-

@rosssakata4912 4 года назад

Great Video love the visuals from the dryer to the meter

@SmokinwithKasket 4 года назад

Thank you for the kind comment.

@iacobmartinez8258 9 месяцев назад

Thank you!!! I stiked the fuse and put back and now my dryer is heating again Thanks again!!!

@quando3411 2 года назад

Thanks William for the great video.

@SmokinwithKasket 2 года назад

Thank you for watching and commenting. Hope the video was helpful. All the Best!!!

@dawntodusklife 4 года назад

Awesome - I don't have the money to get it fixed. Loved all the details for this newbie mom.

@SmokinwithKasket 4 года назад

How did we live without RU-vid!?!?! I'm glad this video was helpful. Thanks for watching - Please subscribe if you haven't already. All the Best!!!

@jbird2246 Год назад

Thank you for this video! It helped me pinpoint the heating issue with my dryer.

@adamkinney527 2 года назад

Very detailed video and showing the process and outcome and explanations on the functions great video

@SmokinwithKasket 2 года назад

Awesome comment Adam. Thank you, much appreciated. Hope this video is helpful. Thank you for watching and hopefully subscribing and have a Happy New Year!