Whoops going HD FPV // Walksnail Avatar // HDZero // DJI O3 Not ready yet // Mobula8

Подписаться 59 тыс.

Просмотров 16 тыс.

50% 1

Mobula8 HD option for all video transmission systems.
Mobula8 HD ⤵️
Banggood - bit.ly/42h49Td ( N America Coupon "BGNick2022" 8% off)
MakerFire - bit.ly/3OQ8OJ4 (Coupon "NickBurns" for 5% off)
AliExpress - bit.ly/3WINDKA
RaceDayQuads - tinyurl.com/3962v5zm
GetFPV - tinyurl.com/yywthh7r Analog version
UnmanndedTech - tinyurl.com/y3bser57
Original Mobula8 Review - • Mobula8 from HappyMode...
Extra Mobula8 HDZero Flight with Siren - • Mobula8 HDZ Siren Flight
Chapters
0:00 Intro
1:07 Desk Weights
2:20 DJI O3 Look
3:50 Outside WalkSnail Flight
7:44 Outside HDZero Flight
12:34 Inside WalkSnail Flight
18:06 Inside HDZero Flight
22:42 Final Thoughts
🔥Daily FPV Gear🔥
► HDZero Goggle - bit.ly/3vznWiX 💣
► Charger SkyRC Q200 QUATTRO - bit.ly/2KgUd8i
► Radio I use RadioMaster Zorro - bit.ly/3JUiNrr
Zorro @ Amazon amzn.to/3uDFt8J
► Best Micro Batteries!! 💯 GNB 💯
Banggood - bit.ly/2PoJglo
Amazon amzn.to/2Xw5VPr
► RDQ Batteries (Made by GNB) bit.ly/2ZsCob5
► Adhesive Welder amzn.to/2IpKKHj
► Motor Wire Tape bit.ly/3airvyv
► Same tape from Amazon amzn.to/3iJjTrT
👌🏽Affiliate links 👌🏽
If you would like to support this channel please use these links.
► RaceDayQuads - bit.ly/RDQ_NB
► HDZero - bit.ly/3GABBfU
► WeBleedFPV - webleedfpv.com/NickBurns
► GetFPV - bit.ly/3rnx05U
► Banggood - bit.ly/BG-NB
► RotorRiot - bit.ly/3N40Ebp
► Caddx - bit.ly/3VL3wyf
► AliExpress bit.ly/3vMbOZK
► Emax - bit.ly/3sn3AGm
► RadioMaster - bit.ly/3ClexPQ
► Amazon - amzn.to/3iJjTrT
► MakerFire - bit.ly/37TAmGo
► BetaFPV - bit.ly/BFPV-NB
If you use these links to make a purchase I may receive a commission, which helps to explore more products on the channel, at no extra cost to you.
👍Reward Free Patreon + Discord
► / nickburnsrc

Наука

Опубликовано:

14 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 195

@Latchfpv 11 месяцев назад

I'm loving everything about that HDZero version. It will be mine soon enough.

@lievenvv 11 месяцев назад

That HDZero camera is truly amazing... And the latency, too. I am running 1s Walksnail VTX's- but it sure is tempting! 22:34 You're in good shape, too!

@MCsCreations 11 месяцев назад

Fantastic flying and review, Nick! 😃 Pretty fun little quads! Loved them! Stay safe there with your family! 🖖😊

@wmcewa01 11 месяцев назад

Great video as always. I like hearing Nick’s “oh no’s!” when crashing. Even the great Nick Burns is human!

@NickBurnsFPV 11 месяцев назад

Lol. Indeed I do crash, some days so frequently

@amin0_acid310 11 месяцев назад

That was prety fast from Analog to HD systems. Happy to see more HD BNF whoops and micros coming out. Might have to check one of these out. Thanks for the video as always, Cheers!

@PakRC 11 месяцев назад

Planning on getting the hdzero version to complete my hdzero happy model family, thabks for all the great videos!

@christiankildb 11 месяцев назад

Great flying, nick! I was also impressed by how little i notice the HDzero sparkles while actually fliying compared to watching them on youtube.

@wattage2007 11 месяцев назад

Wow! That's the best HDZero footage I've seen!

@christiankildb 11 месяцев назад

I always wonder why the HDzero footage in this channel looks almost like in the goggles, but in other channels it is much worse

@NickBurnsFPV 11 месяцев назад

Its likely that I resize the video rather than running it full screen. When I resize I actually make it bigger at 105% which technically decreases the dpi

@Axe_FPV 11 месяцев назад

nice flying man! waiting for the o3 full review. +1 subscriber

@shogunemperor 11 месяцев назад

AWESOME!! Just saw this. Cool review sir!!

@medrone7097 11 месяцев назад

Great video! It’s always fun hanging out with Nick and learning along the way! Love the HD Zero! I also pinch with no lanyard.

@NickBurnsFPV 11 месяцев назад

Ah shucks thanks for spending some time on the channel. Good to hear the odd duck club has more than one member 😁

@h2o40fpv 11 месяцев назад

Hey great flying and this type of drone is the one im missing in my collection so i guess i have to get one thank you for the video.

@jlarson42 11 месяцев назад

Great review and flight video. 👍🤓

@NickBurnsFPV 11 месяцев назад

Thank you

@kazudrone1098 11 месяцев назад

hi Nick....very very insane take. congratulations for contents in this video. little giant drone...see you in the next one ...

@ericbrogren6358 11 месяцев назад

Great review video, but I did miss the usual format with the close up bench-top shots. I learn so much from these detailed views. Especially how they stack/mount these digital vtx and fc boards to the frame.

@ericbrogren6358 11 месяцев назад

Thanks for posting closeup shots to your Discord. That’s such a great resource of info as well!

@Erziraphel 11 месяцев назад

The vibration on the 03 may come from the camera itself. There is a problem with the video sensor. It may have a slightly loose sit in the lens housing. There are a few videos how to fix it.

@mstrout 11 месяцев назад

Thanks for putting this together, You're videos a such a valuable contribution to the FPV community❤

@FATSNAIL-FPV 11 месяцев назад

I was eying the Rotor riot Walksnail whoop.... But I'm european (import tax would rather go to lipo's now), AND I also have the HDzero goggles. Great review, pretty much made up my mind: HDzero version it is, great way to warm up at the racetrack and a vacation drone tiny enough to easily pack with the controller and goggles. Thanks for the video!

@willpowerfpv3246 11 месяцев назад

Badass! Got the analog version coming Monday for IGOW4, but now I've kind of want the 03 version!! I'll make sure to finish the video when I get home from work. Thanks Nick!! 😁✌🏻

@NickBurnsFPV 11 месяцев назад

O3 version might be a few weeks yet. I have a few tweaks left to try on this prototype

@willpowerfpv3246 11 месяцев назад

@@NickBurnsFPV haha, I didn't see the whole video at that point, I'm actually watching it as we speak. I had seen Happymodel's video from last week of them test flying it and didn't see any Jello, but I guess it's going to need some work, and possibly some dampening. Thanks for helping to make it a viable product!! 👍🏻

@NickBurnsFPV 11 месяцев назад

@@willpowerfpv3246 you know I haven't seen their video of it, but they did confirm they are seeing it. I suspect it was a cloudy day, full sun can bring or highlight the vibrations/jello.

@ChrisParayno 11 месяцев назад

I'm looking forward to the o3 version! Im transitioning my fleet to HD after flying analog for years. All I need is a tinywhoop and it covers all my bases! I hope a setup comes in that I can plug and play in the future instead of having XX DJI HD cams.

@billmcdonald4335 9 месяцев назад

I'm planning on getting the analog ELRS version, as well as an 03 mount for it. It looks like I can mount my Caddx Turtle V2 with it. I bought that camera/DVR in hopes it would work with my current Big Whoop, but the way it fits it's too exposed to crash damage. The Mobula8 looks like it'll do what I want with the upside that it's got a smaller footprint than my current 100mm X-frame.

@realwildman 11 месяцев назад

And here I am still flying analog 1s. When you mentioned your neighbor, I thought cool, I've been into trains for 40 years, and the dones were just last year.

@NickBurnsFPV 11 месяцев назад

My neighbor has talked a lot about being able to control multiple trains/lines with a single controller. Seems to like a more interactive simulation

@mark6302 11 месяцев назад

love my tiny walksnails

@NickBurnsFPV 11 месяцев назад

Built or bnf?

@007teal 11 месяцев назад

This is awesome and ironic that i just posted yesterday on the tinywhoop page. i have my own mobula 8 build i did during igow3 and was looking at doing it with walksnail and choosing the right motors. currently 1102 13500 on 2s but it hasnt flown right. Loving how this one turned out.

@NickBurnsFPV 11 месяцев назад

On 2inch props I would drop the kv down to 10000 or really at most 11000. Some gyros are so sensitive we have to find that fine happy spot in mounting and vibration dampening.

@007teal 11 месяцев назад

@@NickBurnsFPV Thats awesome thank you! This was a project i tried using during inverted orbits week and dive week but something seemed off. I will swap motors and check i get the happymodel f4 pro fc mounted with enough dampening. Its cool seeing more 85 builds come out. This will be my second walksnail too after you helped on my larva x walksnail build.

@NickBurnsFPV 11 месяцев назад

@@007teal I think it was the mobula8 analog video where I discuss the trials of getting the screw canopy tightness just right so it would fly well.

@007teal 11 месяцев назад

@@NickBurnsFPV Great thanks i will re watch that video

@Foilhat_FPV 11 месяцев назад

Great video as always ! Do you know if the frame is different then the analog version ? Like to convert analog to walksnail , probably not enough room right .

@NickBurnsFPV 11 месяцев назад

Frame is the same across all versions

@martr 7 месяцев назад

@nickburnsfpv, great video. I am Looking to move to indoor flying, are you flying in acro both outside and inside ?

@NickBurnsFPV 7 месяцев назад

yes, fly acro

@scole901 7 месяцев назад

thanks for the video. what are the battery voltages in the lower left corner

@NickBurnsFPV 7 месяцев назад

Not sure the question. The battery voltages are the voltages of the battery. Top number is the average voltage based on cell count the bottom number is battery total voltage.

@dakzer55 10 месяцев назад

Great review again on the hd options. How about your opinion on getting this versus the Flywoo 2s Nano Baby?

@NickBurnsFPV 10 месяцев назад

Quads without prop protection will always fly better than the counter parts with prop protection

@4kdrone_mania 11 месяцев назад

Esse com a o3 e pronto pra bindar com o óculos e o controle dji?

@Ballantin 11 месяцев назад

Thank you so much for another very helpful review. It is great that more companies are starting to include O3 units in relatively small whoops. I may go with the O3 one if the video is good. Well and if I learn to fly hahaha. I hope they do a better job with this one than with the Mobeetle6. Mine came unflyable from the shop. Still haven't managed to get it right.

@NickBurnsFPV 11 месяцев назад

What is wrong with the mobeetle? binding issue?

@Ballantin 11 месяцев назад

@@NickBurnsFPV Nope it came pretty much with an unusable BF configuration (including BDShot ON with BLHeli_S ESCs). I upgraded BF to have ELRS 3.0 and tried some of the diffs that they have in their website. The drone is extremely hard to control even with very slow rates. I thought it was me until I received the Meteor 75 PRO.

@NickBurnsFPV 11 месяцев назад

@@Ballantin I see you joined the discord. We as well as the other should be able to get the mobeetle sorted if its a configuration issue.

@Ballantin 11 месяцев назад

@@NickBurnsFPV That would be great, thanks a lot! I hope I don't bother you guys so much.

@MrStoppo31 2 месяца назад

Hi great review! Could you please tell us if the hdzero version came with an adaptor to be able to use a 1S battery? PH2/XT30.

@NickBurnsFPV 2 месяца назад

hdzero version is soldered to the 5v pad on the AIO, it does not have a ph2/ BT2 or xt30 connector.

@KlownFPV 11 месяцев назад

Very impressed with the flight time and it doesn't look like you get much sag either

@NickBurnsFPV 11 месяцев назад

Yea, not to bad on the sag. Nice little balance

@kazudrone1098 11 месяцев назад

i from Brazil and you have many subs here

@benherr2736 6 месяцев назад

Hello Nick! Great review as always. I bought the Analogue version with Crossfire. It flies great! One small issue the Video display has 4 Horizontal lines in my Goggles FatShark V2 with TBS Module. I use Race Band 1 by default. Any ideas how I might change this to improve a better image in my goggles? Thank you in advance for your response. Ben Herr - Pittsburgh Guy !

@NickBurnsFPV 6 месяцев назад

I would start by trying different channels. I like to fly R8 as that is above wifi frequency and other RF. If your out in wide open spaces away from towers and buildings I would have to look at the capacitor. Is it still well soldered on, or in this case add one.

@babyzeefpv9887 11 месяцев назад

You literally hopped up to the ceiling lol

@marinebymistake 11 месяцев назад

Nice! Have you seen new colorful versions of Zorro by the way? Look awesome

@NickBurnsFPV 11 месяцев назад

I have, but can't justify adding to the zorro collection :)

@marinebymistake 11 месяцев назад

@@NickBurnsFPV I'd love to see them sell cases separately. Changing the color of your radio easily would've been great for sure

@BikesnB 11 месяцев назад

yo nick, is there any other frame for the dji 03 this size in carbon or at least withour these whoop style prop guards ? lookign for a as tiny as possible dji freestyle fun quad

@NickBurnsFPV 11 месяцев назад

Not yet. Or at least to my knowledge we only have the two so far

@maikwerner7325 11 месяцев назад

It is cool to see the advancements of "tiny whoops" even though the Mob8 is not that tiny. But great to have excellent performance and a few choices of HD systems. Just great times. 2" and 2S seems to be a sweet spot for HD micros :D

@NickBurnsFPV 11 месяцев назад

Yes, we have so many options to choose from. I do like 2" and 2s. Super fun in a compact size.

@KOrnhOliO1 11 месяцев назад

@@NickBurnsFPV 2S and 2" for the WIN! But, it'd be sooooo much better without the whoop frame and it's ducts. It's obviously for outside flying, so why not use a toothpick like frame? Way better performance! Happymodel is very whoop oriented, I suppose...

@rp479 11 месяцев назад

Wait till you try a 3s 3” toothpick. The king of micros

@ChrisParayno 11 месяцев назад

Yes!! 90 percent of my flying is around the backyard or other folks backyards, so this is perfect and not intimidating.

@NickBurnsFPV 11 месяцев назад

@@rp479 I have a 4 year old 3inch 3s tp. It is good fun. i should put an HD video system on it.

@yahtnichols 11 месяцев назад

Awesome flying, Nick. Looking forward to your review of the O3 version. P.S. Hopefully, you didn't run the neighbors away with all your quad testing. LOL

@NickBurnsFPV 11 месяцев назад

yes, I hope the image vibrations can be solved and we can rip around the O3 version as well. Nah, after all these years I have not had a complaint either direct or indirect.

@yahtnichols 11 месяцев назад

@@NickBurnsFPV Happy to hear your neighbors were super cool about it! I can speak from personal experience that not all neighbors are cool about our hobby!

@KOrnhOliO1 11 месяцев назад

@@NickBurnsFPV Maybe you should "do it right", Nick...forget the 03, and build your own naked Vista/Link into one! Let's talk logically... as you and I both know, 03 is awesome, but it's gonna add so much weight, it'll be at best, an OK slow cruiser, But, with naked Vista, it'll be so much more of a little HD RIPPER! :) Especially if you lose the ducted frame! That's where it'll be AMAZING! Especially with NO BATTERY CAGE!!! =(:^)-

@NickBurnsFPV 11 месяцев назад

@@yahtnichols Dang that it is no fun to deal with. I am fairly careful not to fly much when they are outside enjoying their own space. Sometimes I start to pack up and they will let me know to continue.

@NickBurnsFPV 11 месяцев назад

@@KOrnhOliO1 How about the O3 naked option. I am seeing others making the O3 naked, but I worry about the temps as I have seen the O3 emit the heat warning when its as little as 85 out and maybe on for 3 minutes, some of that is the time it takes the goggles to connect.

@ndinno1 11 месяцев назад

Can you elaborate on why DJI O3 version would not get stable video? is it down to the limited battery size? Thanks! Great review

@NickBurnsFPV 11 месяцев назад

in a word vibrations. Camera isn't stable

@_tcmore 11 месяцев назад

Walksnail micros have been really grabbing my interest lately. Currently debating between building a mobula7 up with the system or building one of these with the new ELRS cross FC from Happymodel. This video made me lean towards the Mobula8. HD IGOW!

@NickBurnsFPV 11 месяцев назад

I think that cross AIO is a 5amp esc...right? I while we can likely use it I would advocate to use the crazyf405 HD and its 12amp esc. We have more esc overhead and if we us turtle mode much that could save the esc.

@_tcmore 11 месяцев назад

@@NickBurnsFPV you are right! Thanks for saving me there. Weird that it’s 1-2S and recommended for an HD build.

@_tcmore 11 месяцев назад

@@NickBurnsFPV It's interesting though because the mobite7 HD uses the Superbee F4 Lite which is also only 5A

@_tcmore 11 месяцев назад

@@NickBurnsFPV I guess the cross would be safe for 1S. I also don't think the new HD FC is out yet. At least I couldn't find it in my search.

@NickBurnsFPV 11 месяцев назад

@@_tcmore I have run 1102 10000kv motors on 2inch props with a 5amp esc just fine, but I don't turtle that configuration. As the motor gets bigger it will draw more amps and turtle mode the amp draw can spike really high if the props can't spin when we use turtle mode. This is why more esc is safer.

@LuxMorgano 8 месяцев назад

Hi Nick. What do you personally prefer for flying inside, Walksnail , analog, Hdzero?

@NickBurnsFPV 8 месяцев назад

I still largely fly analog. Probably 60% of time.

@fpvnewbee9436 11 месяцев назад

Great content as usual Nick! I am curious about the vtx burning hot warning on the HDZ outdoor flight. Starts just after 3 minutes into the flight. On my custom 2 1/2" build I stay mostly in the blue on the osd icon but when I land and power down I often touch the main chip. And its freaking hot, almost too hot to touch.

@NickBurnsFPV 11 месяцев назад

Heat is a tricky thing. Yes all our vtx get hot and especially the hd vtx. This is normal but very tricky to determine if it’s outside of norms hot or just hot like normal. If we aren’t seeing transmission issues and we are frequency matched I suspect it’s the normal hot

@fpvnewbee9436 11 месяцев назад

Hi Nick, I understand but your icon has a red flame next to a red thermometer. I have never seen that in my goggles or in any other whoop lite video on the youtubes. I would say you were right on the edge of burning up! I was flying this evening which was nice and cool. With 5 to 6 minute flight times I noticed that my HDZ whoop lite only got warm to the touch which was reassuring. My concern is later this summer when the ambient temperature is above 90 F. I'll be keeping a close eye on that osd icon, that's for sure.

@NickBurnsFPV 11 месяцев назад

@@fpvnewbee9436 yea we have been in the high 80s and low 90s here when its not raining. We can turn the fans up to help the cooling.

@fpvnewbee9436 11 месяцев назад

Turn up the fans? I don't understand. Nick, I am talking about the VTX overheating. Did you speed read my post?

@NickBurnsFPV 11 месяцев назад

@@fpvnewbee9436 the fan speed of the hdzero goggles have a speed adjustment.

@andreastornesel8404 11 месяцев назад

Finally❤

@NickBurnsFPV 11 месяцев назад

Yes, It does take time doesn't it :)

@user-yk1cw8im4h 11 месяцев назад

Hdzero image is way sharper and less muddy than walksnail

@arQadjo 11 месяцев назад

Maybe low and stable HDZ latency make the difference

@Greg__K 11 месяцев назад

It’s a smaller image size in this video. The HDzero is definitely warmer looking, and over saturated. I like the way it looks personally, but WS is closer to real life colors. I’m positive if you were looking through the goggles WS would be a sharper image.

@jas-FPV 11 месяцев назад

@@Greg__K its only slightly smaller and colours are not relevant talking about sharpness

@Greg__K 11 месяцев назад

@@jas-FPV Putting them up side by side, WS is a little sharper, even with the image being different sizes. The font on the HDzero is definitely sharper, the default betaflight font or whatever Nick is using on his WS goggles doesn't look very good at all lol. Colors can definitely have an effect on perceived sharpness of an image. If one is washed out looking versus a more saturated image, it can look like one is sharper. You can change Camera brightness in the WS goggles. It'll actually record to the DVR that way too. So it could have been set higher on a gloomy day, and then never switched back? I'm not sure if that's what happened, but something to consider. Both systems look great and have a place in the digital side of FPV.

@adegtiarev 11 месяцев назад

Hi Nick. Thanks for this review! Can you compare Mobula8 Walksnail with betafpv 85 walksnail. Which one is more powerful? Whose frame is more durable? What do you think?

@NickBurnsFPV 11 месяцев назад

Its a tough call between the two, but I think I would rather have the mobula8 walksnail. The meteor85 runs higher kv motors but on bi blades, I like the feel of the lower kv on triblades.

@drelephanttube 5 месяцев назад

@@NickBurnsFPV Maybe it's changed at some stage but the specs say they both use 1103 11000kv motors? I'm also trying to decide between Mobula8 and Meteor85 walksnail.

@crazylolsbg 11 месяцев назад

I looked throw banngood today and saw tthat o3 frame and searched for it on youtube and just couldn't find any vids and now you ubloaded! I am hipped for o3 tinywhoops. what do you think is better? that betafpv one or this one?

@NickBurnsFPV 11 месяцев назад

If the camera image can be stabilized I think the mobula8 O3 version will be more fun for me. The pavo pico is really a slow flat flyer, which the M8 O3 could do as well, but we can also fly it much more aggressively than the pavo pico.

@crazylolsbg 11 месяцев назад

@@NickBurnsFPV OK, I think i will get the proper version

@drelephanttube 5 месяцев назад

I'm curious of what you think of Liftoff Micro Drones sim? I wish they'd add your house to it by the way!

@NickBurnsFPV 5 месяцев назад

Surprisingly I have not tried it yet. Odd I know, I just don't sim all that much.

@drelephanttube 5 месяцев назад

@@NickBurnsFPV No need, when you have such a nice space for flying, and a tolerant family!

@forestfishburne7900 11 месяцев назад

Is the remote I.D. a thing with the O3 vision systems, or just the DJI drones? If so, I’d prefer to avoid the DJI system all together.

@NickBurnsFPV 11 месяцев назад

I believe that is only on the prebuilt dji drones. In this case as well as others we by the O3 separately and add to the drone, making it a home build. And it’s well under 250grams so no registration required

@JeromeDemers 11 месяцев назад

so you are not doing early review of the o3 version because it's prototype? but you did the pavo right, that was also prototype. Is it because the jello is horrible? How long does the o3 fly indoor? with 530 or 550? Thanks

@NickBurnsFPV 11 месяцев назад

The vibs are terrible but it’s also not acceptable. I didn’t focus on the flight time I think it’s around 3:30 on 550

@907fpv9 6 месяцев назад

What rates do you fly on?

@Mupshot 11 месяцев назад

All plastic frame like the mob7? Assume it flexes quite a bit

@NickBurnsFPV 11 месяцев назад

Yes it is all plastic and yes it does flex a fair bit.

@yonseimatt 11 месяцев назад

I'm not sure about the frame, but some frames take both 6mm 3-bolt pattern and 9mm 4-bolt. As far as I know, most 1102s are 3 bolt, whereas 1103s are 4 bolt, so the 1102s won't fit this frame (though I'm sure there are some non-standard mount configurations among both sizes). Great review as always!

@NickBurnsFPV 11 месяцев назад

The mobula8 frame does take both 3 and 4 hole mount motors. The Happymodel 1103 on this model are of the 3 hole variety. We can see it here on the analog video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GikuzJcxI8E.html

@yonseimatt 11 месяцев назад

@@NickBurnsFPV Thanks for the speedy reply!

@FlyingBeeFPV 10 месяцев назад

Hey Nick, Happymodel has claimed to have solved the O3 jello issue. Are you going do an updated Review of this new Version? I value your Opinion alot.since i am still undecided whether to buy the pavo pico or mobula8. witch one produces less noise?

@NickBurnsFPV 10 месяцев назад

I do have it and will be doing an update.

@FlyingBeeFPV 10 месяцев назад

@@NickBurnsFPV great I will be holding out for it

@DarkestOfCrows 11 месяцев назад

New video! And I’m early!

@MCsCreations 11 месяцев назад

Second, I guess. 😬

@kavonkeebs 11 месяцев назад

How long does it take to edit these videos? They are very good

@NickBurnsFPV 11 месяцев назад

It can vary. This has a lot of flights in it so longer than typical. I probably spend a hour or two going through flight footage. Then add the betaflight osd to the walksnail. Then add flight audio to each flight. Then record the main video. Then edit down. I would estimate this one took 4-5 hours.

@sonnivega6739 11 месяцев назад

waiting on the dii version or build my own with naked vista

@NickBurnsFPV 11 месяцев назад

I kinda thought they would offer a vista/link version. I guess we have to build that version ourselves

@sonnivega6739 11 месяцев назад

@@NickBurnsFPV I agree. Extra careful on those tiny solder pads 🫠🫠

@jamesshields5958 11 месяцев назад

Could you do a CiottiFPV and just go big on throttle expo to tame this for indoor flight?

@NickBurnsFPV 11 месяцев назад

We could do that. Also motor output limit. At that point it kinda feels like we should still just have a 75mm whoop

@jamesshields5958 11 месяцев назад

@@NickBurnsFPV Yeah I guess so. May I ask your current recommendation for an indoor Walksnail whoop for a house a little smaller than yours? Thanks!

@NickBurnsFPV 11 месяцев назад

@@jamesshields5958 I think these are pretty much our only options that I can recommend other than building. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Mii1TOfyZeY.html that video is a comparison of the Meteor75 and Moblite7. I hope the video covers not only the differences but my opinion on them as well. I think what could be a big factor is our desire to solder on a different battery connector and the fact that the best 1s batteries have bt2.0 connectors on them. But gnb27 is more globally available.

@RockFPV 11 месяцев назад

Just curious, did the Pavo Pico O3 come with ESC's flashed to 48khz?

@NickBurnsFPV 11 месяцев назад

I am not with it at the moment to double check but yes that is my recollection.

@Sam-ei4yx 11 месяцев назад

Nick what’s your favourite size whoop for only indoor flying?

@NickBurnsFPV 11 месяцев назад

My long running favorite is 75mm with 40 mm props. But 65mm with 35mm props which is also very good.

@Shauny_D 8 месяцев назад

did you fly the 03 version? I can't get mine to stay on. Any throttle blip above 60% cuts power to 03 and it reboots.

@NickBurnsFPV 8 месяцев назад

Yes I have a video on it. Seem like the symptom is battery sag not able to keep up with voltage demands. Maybe the 03 has a poor solder connection but I power?

@Shauny_D 8 месяцев назад

@@NickBurnsFPV yah it's bad. I made a parallel adapter to run 2 450s at the same time and it flys for about 4.5 minutes but still that 7v Mark is not a joke. There's no milking it past that point.

@georgelai2810 11 месяцев назад

Did you mention how much the O3 version weighed? I didn’t see you put it in the scale.

@NickBurnsFPV 11 месяцев назад

I am pretty sure I weighed it in the video. Surely I didn’t cut that bit

@TheHelicapt 3 месяца назад

How many mbps are you getting with the mobula 8 with walksnail ? I’m on,y getting 25mbps

@NickBurnsFPV 3 месяца назад

I don't really recall, I suspect with it so close it was 50mbps, sounds like you might be in a public channel or stand by mode.

@Kopcio01 11 месяцев назад

14:07 you mention hd0 twice, i think what you mean is hd0 have no latency and WS have ~34ms ? What about range of that ? Mainly if it will be capable to fly around a brick house.

@NickBurnsFPV 11 месяцев назад

ah yes, sorry wrong word there. I can fly the hdzero whoop vtx around my house which is brick faced. I am sure its in the hdzero whoop lite video.

@Hellmuthsilva 4 месяца назад

What is the best whoop hd? That you can use inside and outside?

@NickBurnsFPV 4 месяца назад

the considerations will vary depending on the hd system.

@Hellmuthsilva 4 месяца назад

@@NickBurnsFPV hdzero

@mr.dronez8315 11 месяцев назад

Hey Nick just curious what are your rates?

@NickBurnsFPV 11 месяцев назад

These are my rates ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-llpHcWQx8q8.html

@KOrnhOliO1 11 месяцев назад

HINT: If you grab a BetaFPV 85mm frame...cut ONE of the 4 super solid vertical struts for the battery cage out....and get a naked Vista....you can barely squeeze the naked Vista into that battery cage area and, with some bending and slow maneuvering....You can push that naked Vista into that battery cage. No need to mount it, it fits so damn tight it can't go anywhere. AH HAA! Now the center of gravity is moved way, Way, WAY LOW! It's no longer top heavy at all!!! The Vista/Link is so low, it's like a bottom battery mounted quad! Mount your AIO FC/ESC on top like usual.... 3D print one of Mr. Shutterbug's famous minimal camera mounts....mount the Vista/Link Nano camera in it and screw it right on top of the flush mounted AIO FC/ESC, I used 1103, 11,000kv motors and Voila! You have a super low rider DJI naked Vista/Link 85mm whoop RIPPER!!! The Nano camera is THE ONLY thing that sits up above the otherwise completely flat to the ducts, top of the whoop. Because that battery cage on the BetaFPV 85mm frame is so robust and solid, your Vista/Link is protected. I 3D printed, with flexible filament, a simply shock absorber landing pad / battery mount and fits under the batter cage naked Vista area. You can zip tie it onto the underside of the battery cage (now used for naked Vista). Make battery strap, rectangular loops, for your battery strap of choice and you have quite a wonderfully flying ultra clear HD image, 85mm tree canopy explorer, deep woods labyrinth squeezer inner (lol), incredible range, and overall fun 85 !!! Super easy build too! :)

@aliveathome 10 месяцев назад

Sounds like a better option for sure. Exactly what frame are you using, is it the Beta85X frame? Anywhere to check out your build with pictures?

@android131619 9 месяцев назад

U thing that the analog version is better choice so I can have a extra analog camera for the same price as a 03kit ?

@NickBurnsFPV 9 месяцев назад

analog will certainly be cheaper and also have more performance. I expect a second analog camera on hand for the analog mobula8 will be far less expensive than o3.

@android131619 9 месяцев назад

@NickBurnsFPV thank u for u answer but I think I didn't explain myself 😅 I was thinking in getting the nebula8 analog version and 3d print the canopy to hold the 03 and take the analog camera for something else, but my question is if the difference between the x12 and the crazyf411 aio in performance or durability worth the extra analog camera because is almost the same price the analog version and the 03 kit 😀

@NickBurnsFPV 9 месяцев назад

@@android131619 The x12 has built in video transmitter. The crazyf411 does not have a vtx. That is the only difference. I am not sure of the difference in uarts for soldering to for the O3, if the mobula8 O3 was ordered it would have the wiring harness already soldered to the board ready to plug into the O3.

@joelewandowski8232 11 месяцев назад

Which do you prefer HD Zero or Walksnail / ELRS or Crossfire ?

@NickBurnsFPV 11 месяцев назад

Oh goodness. This seems like it could start a mole hill. For inside flight I prefer HDZero and ELRS. Outside it depends on the type of quad, smaller HDzero again and elrs. Bigger walksnail elrs.

@joelewandowski8232 11 месяцев назад

@@NickBurnsFPV thanks I'm considering upgrading from analog and frsky to the 21st century.

@NickBurnsFPV 11 месяцев назад

@@joelewandowski8232 lol. I flew frsky for a long time and still fly analog pretty regularly. ELRS can be frustrating the first few times but like all things it becomes "old hat" after a few times.

@newbiefpv 11 месяцев назад

We will have new FW from WS , it’s super low latency for racing🎉

@NickBurnsFPV 11 месяцев назад

low latency would be a nice feature. Will this be a mode for racing or a reduced resolution to accomplish this?

@newbiefpv 11 месяцев назад

@@NickBurnsFPV yes 540p

@NickBurnsFPV 11 месяцев назад

@@newbiefpv what is the reported latency with that resolution?

@jas-FPV 11 месяцев назад

Its funny: people complain about HDZ quality yet the HDZ looks so much sharper than WS 😬

@r4pid1337 11 месяцев назад

It's not the quality of the video but the link quality

@vanturner9403 7 месяцев назад

The price of housing is crazy. I live in Southern California Huntington Beach area. A 3 bedroom rental is almost and mostly A lot more being $3700 a month. Plus first and last month before moving in… California sucks actually. Overrated is a better word. Great weather yes but.. everything else sucks. Government here is horrible.

@NickBurnsFPV 7 месяцев назад

Yea the cost of living in beautiful or nice weather places is really hard to cope with.

@KOrnhOliO1 11 месяцев назад

IMO, there are craft that are suitable for the DJI 03, and there are not...An 85mm whoop is not suitable. Why wouldn't they simply use a naked Vista/Link? It still gives better image quailty than Walksnail's half baked 1080P...the 1080P JB won't even use because of all of it's issues. The Vista/Link wipes out HDZero, which can barely fly 30m without GOBS of colored sparklies and the inevitable rainbow screen of death. Just don't fly around any solid objects! LOL The Vista/Link weighs hardly a few grams more than either of the other two VTX's, but the performance and reliability makes it worth using it. The 03 is awesome, but unless they make it naked, it's not great for an 85mm.

@TropicFPV 11 месяцев назад

Thanks for another great review! There's actually a mod you can do to the Zorro ELRS to double the battery life. Between that and some higher-capacity 18350s I'm up to 4 hours at 250mw! Here's a link to a video I did about it: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4Uv-7vRSnJw.html

@StallionButter69 11 месяцев назад

I have no interest in this product, I just enjoy watching you fly and hearing you talk.

@NickBurnsFPV 11 месяцев назад

lol. Nice that i can supply a bit of enjoyable entertainment then :)

@slymanaltawil2271 11 месяцев назад

Do you get stuck on what drone to fly since you have so many? 🤣

@NickBurnsFPV 11 месяцев назад

No not really. I have my custom builds which are similar to some bind and flies, these are the ones I fly most often when I am not flying for review. I giveaway much of what I have on the channel, so the shelves aren't as full as some expect.

@slymanaltawil2271 11 месяцев назад

@@NickBurnsFPV I have a custom build 2.5 4s pusher have you seen one like that?

@NickBurnsFPV 11 месяцев назад

@@slymanaltawil2271 Yes I think there has been a few meeting that description.

@slymanaltawil2271 11 месяцев назад

@@NickBurnsFPV any recommendations?

@NickBurnsFPV 11 месяцев назад

@@slymanaltawil2271 iflight defender is the most recent I can think of.