Wired Addressable ARGB Controller 

THANK YOU VERY MUNCH FOR THE INFO INSTALLATION. I fallow the manual that that it was given but i could not start the light, then i figure it when i see your wiring description. Nice , Good Job , and Thank You Very Munch

Hi comunnity! Here the answers to the most common questions : 1.Can I control my rgb / argb devices with the motherboard software? - Yes, you can control it with any RGB / ARGB software. Just connect the 4 or 3 pin cable to the bottom of the controller. 2.How can I control the lighting with the cooler master software? -You have to connect the micro usb to the controller, and the other part to the motherboard usb. 3.Can I connect the RGB/ ARGB devices directly to the controller without the need for a splitter? -Yes, you can directly connect the RGB / ARGB devices to the controller. 4.Do I have to connect the fans to the energy? -Yes, you need to connect all your RGB / ARGB devices to PWM 4 pins (mobo or splitter) Good luck PC MASTERS and RGB Lovers! Leave a like to not lose the comment and continue helping more people!

Nice. Will there be like the Masterfan a set with 4 fans + controller? Would like to use it for my custon water cooling. Fans look really nice.

@coolermaster where can i buy just the controler?!

Just hooked up the ML360R. I'm in love.

excited for your 360mm AIO

Bought this the other day and it was a pain in the ass to set up, gonna return it soon, I’m incredibly new the PC building and it sucks this is my first experience with upgrading to an AIO

will the controller work on the cooler master rgb controller. I have the the separate controller and I wonder if its compatible with masterplus software

I have 2 Cooler Master MasterFan MF140R ARGB fans, will it work on my msi b450m bazooka just out of the box? Or i need controller? Or fan spliter?

okay so would i need this to hook up my Wraith Ripper(WR) to my ASROCK x399 mb?? As well as all my other RGB fans? ( DarkFlash case with controller) as of now i cant get the WR to light up... it has a USB connection... an internal one

Good morning, one question I have got td 500 mesh + ml360r cooler master, so i connected With splitter, the AIO fans to CM controller ARGB. can I connect the 3 case fans to same controller use adaptator on connector? Or I must connect to motherboard with gigabyte connector? Thanks!

I wonder if the model MASTERFAN MF200R RGB is compatible with the SPECTRUM mode ???

I bought this cooler secondhand and it does not have any cables or rgb controller. Where can I purchase the controller and cables

Can you actually by this? I do not see it on their site

Hi ! Can we buy the controlle separatly ?

Can we connect another 4 ARGB fan to the same controller?

My only question here is... The splitter being used is a proprietory ARGB splitter from cooler master.. so my only doubt was if.. Could i use a standard RGB female splitter an still run the ARGB fans? As the voltage ground and data wouldn't be affected ? Please help me out

S o can u control the rgb from the software if u using the usb header?? Or u have to use the 5V rgb header form the motherbroad to control the rgb effect?

Can I control the coolers speed for software?

Have not seen anything simpler and better. 👍

do these work with the Fractal Design Prisma AL-12 PWM fans?

Can i connect my all rgb fans to motherboard through this ARGB controlar instead of direct connect with motherboard, to control lighting effects by motherboard rgb software.

The cable connection part in the manual looks so complicated and different. Is this actually this simple? Does this work with the ML360R too?

question my asus board is rgb ready do i still need argb control box?

Can i connect a 1 yo 3 splitter on other 1 yo 3 splitter or do i need another controlador? Can work?

How to use masterliqid ml240r RGB with master fan mf120r ARGB??? Or they wor seperate from eachother???

is the controller the same in both the 120 and 240 models? thanks

If I attach them to a radiator like on the video, What will happen with the CPU Fan pin in the mobo? I mean, How is the motherboard going to know, what is the fan speed for the CPU cooler?

Can i just connect the 4pin connectors on the fans into my 4pin connectors on my MOBO and run software to control the color?

Is this only for coolermaster fan or any fan that has rgb conector?

Dont know if I connected it properly but I can't select individual fans on the masterplus software

I have downloaded the software and wasn't able to sync, in fact, the software said I had no compatible hardware installed. My question is: the USB output works to do the sync? Because I'm trying to use 12v port and it didn't worked or should I have pressed the button to use the ARGB?

Do all those wires come with the liquid cooler?

HELP!!!! Can't get RGB lights to work. Have everything plugged in and set up the exact way as this video. Lights on controller light up and turn on and off but still get no lights on fan or pump. Lights work fine when plugged into different Source other then the controller. is controller problem???

I have the ML120L and it's a really effective cooler, but as I see in the comments already as well, the biggest issue I had with this was the cable management for the wired controller for the RGB. I can't imagine how much of a pain in the ass this huge box is going to be... I'll give it more time, but having a software to adjust the colours would be much nicer, especially with the Aura colours.

I have no idea why this needs a connection to a USB connector as well as a SATA connector. Is it so that you can control it in software? The SATA is obviously for the 12v power. Can you connect each fan to a different ARGB port and control each independently?

hello i wanna to buy the cooler master argb 5 port splitter, can it supply all 5 connections at the same time?

what does the fan signal wire do? when I connect it to the controller my bios doesn't show CPU fan rpm

will it work on other argb devices too? other than coolermaster's?

Is there any difference from the mini controller?

please someone answer me ... if i don't have a mobo with argb 3 pin 5v if i connect the controller via usb header to mobo will it work correctly with the Cooler Master software? without having to touch the buttons on the controller? thanks

0:21 Mirage Effect(software required) which software?? I connected the green cable to the mirage effect port and got the masterplus software and i dont see any mirage function??

How do I get it to work with Asus Aura Sync?

Still not RGB-Fusion from Gigabyte compatible as the connection-pins on those motherboards are different then Asus/MSI/AsRock. Is there an adapter available in the box ?

I watched this video and installed it, but my 1 to 3 splitter cable is four pins. but you put on three pins in your video. So I put on another side, my RGB doesn't work. Why did you give me another one? I cannot understand. And then I use a 12v zender, it didn't work too. The warranty period is short, the RGB is not worked, and the cooling is not good. I should have bought Kraken and RGB fans TT

Hello, how do I sync CoolerMaster Masterliquid ML240R RGB with Dragon Center Mystic Light. I have checked here www.msi.com/Landing/mystic-light-rgb-gaming-pc/compatible-products that my AIO cpu cooler is compatible with Mystic light. How can I control the lighting on Dragon Center directly? Thank you.

i cant find any video setting up this controller with aura sync. please post me some link if you find one! it looks better synced with the board. this standard modes of rgb lightning is to boring. the board can handle it better.

i don't see any control of the brightness. Is that the same with h500m ?

For me the light is not turning on is there anyways I can fix it

So can i configure argb color without connecting 3 pin to my motherboard? I only have 4 pin rgb)

hello can i use non cooler master product on that controller?

How many fans case we can setup with this controller?

Can i customize color modes? And with mini controller version?

what cable do i need to connect to mirage effect?

what does the mirage mode do? and how to enable it?

Can the colors be controlled through Aura Sync using only the USB connection on the MOBO? I have a Asus Prime Z370-A with a single 4-pin RGB header that I am currently using to light my case fans.

Is the usb adapter included with this controller

Can I connect an ARGB strip to the controller? If so then what's the maximum number LEDs can be connected to the controller?

So possible to connect 3 fans each port ?

Hello could I buy that driver separately? it's broken ...

I want to controll the rgb controller with my mb, but which cable I have to use? The 3 or 4 pin rgb cable?

So where is the 2 power cables at the bottom of the fans running to?

Mine is not working at all. I plugged every cable correctly but it doesn't light up. I don't know if the controller is broken or what.

Will this work with any argb Product?

1:16 whyd the argb 3 pin slot get changed

My m/b don't have A-RGB and RGB header, if i connect the micro usb to an internal usb header can i control via software?

What is USB connection do exactly? In my case, it is running well, just only SATA connection and RGB connection to fan.

how many fans can I connect to that controller? is It support 5 fans?

Hey bud Is this controller compatible with aura sync

Thanks for this video. Big help. Make for the case too. How to plug/connect all wires. Big help for newbies. #cooletMasterisLove

it's compatible with aura sync via usb?

Hi Cooler Master I buy recently Cooler Master ML120R RGB, but I can't find a solution for problem how to sync Aura ( Asus Prime X299-a ) with CPU cooler and fans. So I need manually to adjust lights of a case and motherboard with CPU cooler colors. Want to connect with motherboard. Do you have any solutions or instruction for the particular problem? Thanks

Can we control using software?

Mine works on just the USB connector (no SATA connector connected) what's up with that?

Is there an option for only color and no effect?

Apakah ini rgb control bsa connect jg sama fan h500p yg d dpn itu. 200mm x 2.

Where can I buy the Cooler Master A-RGB fans? without the liquid master

Hello, can you plug the 3 pin into the mobo bypassing the controller and just use software to control the RGB??

So is it connect the usb header to MB, that is no need to connect the 5V ARGB on MB?

Why doesn’t Cooler Master sell this ARGB/RGB controller hub instead of tiny ARGB one...

please help me. i have a case with 9 fans argb pwm with the croller that need to me connected to the 3 pin on the mobo. my mobo have only the 4 pins. i can use that to plug the fans controller i have for make it work??

So you plugged it in the usb header, my MB z490 has only two of them, i need one for CPU power and front panel, the other one is used by cooler master 360R, I have a wifi card which needs a usb header how do i use it ?

hello can we connect a led strip?

Top agora sim é RGB

Can this convert ARGB components for older 4 pin motherboard connectors to allow the motherboard to control the color of ARGB components?

Would this work on my MSI B450 TOMAHAWK MAX Motherboard? Please respond

the controller never works for me, at least properly literally pointless and idk where you get the software cause when i found something it literally just put on pre sets and didnt let me make my own

Where can you buy this thing?

Bad instructions on this product, even the video above does not show it fully hooked up, where do the bottom 2 wires go? Only 1 of my rgb lights works on a 3 fan aio. So annoyed

My only problem with this video is that it shows all the ports on the left side but chooses to completely ignore explaining them and how to use them... could someone fill me in?

Anyone know where to buy this product in Bangalore?

I doesnt have the sata cable for the Power. Where can i buy this cable ? Or whats the correct name of the cable.

Is this control pad inside the case? If so what's the point in that... can someone explain how this works in plain English please. I don't want extra wires and plugs outside my new rig. Additionally, everytime I go to iCUE software it freezes my front fans - what is this mess?

Hi all I have a problem, I purchased the ml240r,pump leds are working,fans are spinning but fans leds won't turn on can someone help please ?

When them830? Its my dream mice...

How to AURA Sync?

Is there White color on the rgb of the ML 240r RGB?

What is the fan models?

I got ml360r and put on h500m. But i dont know how to do the cable management so i can play with the controller outside of the casing.. Haha..

Wheres the mirage effect. How do you set it up. Theres no info anywhere