Тёмный

X-Plane 11 - Using Air Traffic Control 

Jason Vriends
Подписаться 17 тыс.
Просмотров 85 тыс.
50% 1

Опубликовано:

 

29 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 141   
@LuisVargas1403
@LuisVargas1403 7 лет назад
Unfortunately the ATC of XP11 has bugs in reading heights on mountainous areas asking to lower the altitude which puts the aircraft in a collision course with the mountains. One notable mistake is to be in an 2100 feet airport and the ATC does the clearence for takeoff asking you for climbing to 1000 feet.
@LaurinSchaller
@LaurinSchaller 7 лет назад
good video but i figured out that the ATC is completely useless at altitude or if you have a mountain range ahead. It will just let you crash into the mountains and you cant request an altitude as far I'm concerned.
@eatsomepizza420
@eatsomepizza420 5 лет назад
ive been dealing with this for a while now.... very annoying... anybody knows what to do?
@tonycheng6478
@tonycheng6478 4 года назад
When X-Plane 12 get released, it might get fixed
@KDill29
@KDill29 2 года назад
​@@eatsomepizza420 fly without ATC, lol, I sometimes cancel it mid way to the end of my flight, cause they start becoming very useless
@KDill29
@KDill29 2 года назад
​@@tonycheng6478 I'm not putting myself in a holding pattern waiting for that miracle....
@Auntcankles
@Auntcankles 7 лет назад
I gotta hand it to FSX, for being 10 years old, their ATC and IFR clearances and dialog are far better than this.
@dev0random
@dev0random 7 лет назад
It still blows my mind that no one wants to make a better ATC and IFR clearances for X-plane. I don't know if this is a limitation with X-Plane itself or just people don't want to do it. There's certainly enough following and a community to make something better.
@Bob6fjhfhjjhd9696hfhfhjfdnndj
@Bob6fjhfhjjhd9696hfhfhjfdnndj 7 лет назад
hey i have a question at min. 10 the control says "heading 150" why he isnt changing his heading? and later he also isnt chanceing his heading why ? im new on flight simulator sry
@alfredos.5988
@alfredos.5988 7 лет назад
ATC was talking to the A.I with the call sign N02XP (the players plane is N172SP, located left of the Artificial Horizon), just some random A.I flying around with you so it doesn't feel like the world ended :D, you can turn the A.I planes off from the menu so you don't have hear them. looks like he left them on for the video.
@jonathan7760
@jonathan7760 7 лет назад
124thatc.matacchieri.eu/ simply follow that link and you will be blown away ^^ (okey that atc is not perfect, but far better than the default one)
@cameronsamayoa2829
@cameronsamayoa2829 6 лет назад
Keith Bauer I really agree......P3d/FSX have way better ATC. Also, I hate how you can't have a different tail number. Fsx/p3d have that feature where you can change callsign and tail number.
@TheWarSimmer
@TheWarSimmer 6 лет назад
Great tutorial. Been looking everywhere for something like this. Thanks
@kevinaltizer
@kevinaltizer 7 лет назад
Thanks for the video. It's helped me discover ATC flying.
@scose
@scose 4 года назад
thanks, exactly what I needed! wish this was part of "flight school"
@Hyestar
@Hyestar 6 лет назад
Not only is FSX better in IFR applications, but VFR ATC is leaps and bounds ahead of XP11....Its shocking.
@marsoups
@marsoups 6 лет назад
That's saying something, as FSX has some very annoying ATC bugs.
@technovan1133
@technovan1133 2 года назад
@@marsoups ATC in the FSX is far way better !!
@pesto12601
@pesto12601 6 лет назад
some interior lights would have been nice while you were setting stuff up.... geesh... night flights!
@Sgoburgos
@Sgoburgos 4 года назад
Very clear and quick. Thanks.
@rafzero
@rafzero 2 года назад
Im confused because as soon as im in the air traffic control guides me to other airports than my flight plan . and if I force to fly to my destination they wont let me request a landing.
@williammickelson403
@williammickelson403 6 лет назад
very informative helped a lot thanks :)
@greybadger3142
@greybadger3142 4 года назад
Great vid. Whoever guided that jet liner in over the top of you at the end, probably needs a new pair of glasses! :). I wondered, is the only way to interact with ATC, to file and follow a whole flight plan with them? I just want to take off, fly around some waypoints and land again. Maybe same place, maybe somewhere else. But that doesn’t mean I wouldn’t like the immersion of dealing with ATC for take off and landing procedures. Badger
@garbun0629
@garbun0629 5 лет назад
Hi. I’m new to X-Plane 11. All your tutorial videos are helpful. Thank you. However, I do have a question about using air traffic control. I followed this video to practice my first ever flight with X-Plane 11 version 11.35r1. After I requested taxi, the sim didn’t tell me to contact tower (the check in with controller button was grey out). And didn’t give me “cleared to take off” notice. So I ignored it, I took off and then the atc asked me to contact tower and heading direction. So the steps with this version is diff than yours now. Is this normal?
@Wendygirljp
@Wendygirljp 7 лет назад
Just curiosity causing this question: Why did you not follow instructions by ATC for navigating with headings given?
@randallmacdonald4851
@randallmacdonald4851 7 лет назад
Thank you. Nice flight.
@orangebetsy
@orangebetsy 4 года назад
toronto's code is one of my favorite tunes! DA DIT DA DA DA DIT । DA DA DA DA DIT DIT [bass face]
@orangebetsy
@orangebetsy 4 года назад
oh that's Pearson hahaha this one's -.-- / - / --.. DA DIT DA DA DA DA DA DIT DIT ...shit's now a bar of 9 followed by a bar of 6
@mattsmith8160
@mattsmith8160 7 лет назад
Did this have to be a night time flight?
@TheBulldog201
@TheBulldog201 6 лет назад
How do you know what runaway is to land on daylight? It doesn't even appear on the map
@daadood100
@daadood100 6 лет назад
incretible that all complaint and critic of the ATC and attitude bugs that xplane 11 have is been over a year and they dont seem to have any intention to fix the bugs, that really sucks.
@tonycheng6478
@tonycheng6478 4 года назад
When X-Plane 12 comes out, it might get fixed
@Juanitro81
@Juanitro81 5 лет назад
Hello! I have been watching your videos , great videos by the way making a flight plan and using the controller but every single time that I’m close to the airport that a have to land the controller tells me to go up an hedding another way and don’t let me land the plane can you help me with this , I’m new with x plain I don’t know nothing about flying but I really like it I hope you can help me thanks! .
@ericc7936
@ericc7936 5 лет назад
when i try to fly this route cytz to cyoo i get directed to runway 26 and miss cyoo??
@Aardvark892
@Aardvark892 4 года назад
Sure wish you could have filmed this during the virtual daytime. Woulda made it a bit easier to see what you're doing on the controls.
@janetcohen8610
@janetcohen8610 5 лет назад
i'm not getting any audio. is that because i have 124th atc as a plugin but not using it. any suggestions?
@janetcohen8610
@janetcohen8610 5 лет назад
didn't see or hear when u turned on autopilot?? when. after take-off?
@harlequin991
@harlequin991 6 лет назад
Good vid .thanks . But when I press enter I get a cursor. Not a file flight plan . Think my keyboard is set up wrong .
@Pash_art
@Pash_art 2 года назад
how do you have atc in a window not a text field
@AbcDefg-tq3ju
@AbcDefg-tq3ju 6 лет назад
Laminar was obviously more concerned with the pretty graphics. This shit forgot i even existed and there i was, flying over kphx (my planned dest.) at fl25000 like a dickhead.
@Royaltyforever_90
@Royaltyforever_90 Год назад
Golden comment.
@johnnyonthespot9898
@johnnyonthespot9898 6 лет назад
When i press the atc button for x plane 11 now it comes up with just a search bar help
@RigidRecords69
@RigidRecords69 7 лет назад
Not one of XP11's better features
@tonycheng6478
@tonycheng6478 4 года назад
When X-Plane 12 comes out, it will get better ATC
@KDill29
@KDill29 2 года назад
I wish I could ask for step ups or downs to other ALTs. You do anything ATC doesn't like and it's so frustrating. Sometimes they get me stuck out in left field, trying to land. Turn 350 turn 320 turn 300 back to what heading I was at. Like, yoooo I dont need those 2 other vectors, push me up to the next one, eff it I'm coming in hot Tower, give me the # to call when I land.
@TacticalSandals
@TacticalSandals 6 лет назад
How do you select a airport to land at if you do not have a flight plan? Is it impossible? I tune to the radio channels but they don't offer me anything.
@HowardandElaine
@HowardandElaine 6 лет назад
You can dial any frequency you wish. You don't have to use Flight Plan for casual visual flying. Use acceptable altitudes and head in the direction of the airport and tune in the tower, as in real flight. You can use skyvector.com to get your magnetic directions and an idea of where you want to go. It also has all airport frequencies and runway diagrams. Just don't file a flight plan with them as they are for real pilots in real airplanes.
@RealSamuelMach
@RealSamuelMach 2 года назад
the problem is on so many airports the atc radio distance is so small you are less than 10 nm from the airport and you don't even have landing clearance so annoying...
@arian-spirit
@arian-spirit 7 лет назад
Hi, i dont have the ATC. When i press enter it show´s me like a "chat" windows. The key is configured by default. Do you know what could be happening?? Thanks in advance.
@JasonVriends
@JasonVriends 7 лет назад
Under Settings, Keyboard, see if return is mapped to Contact ATC.
@arian-spirit
@arian-spirit 7 лет назад
Thanks jason. It was mapped. I had to remove all the multiplayer connections and it fixed the ATC. Found this in a forum.
@liamjimmons1371
@liamjimmons1371 7 лет назад
How did you remove multiplayer connections?
@JasonVriends
@JasonVriends 7 лет назад
Watch my video called Flight Configuration for the answer.
@franzamann1
@franzamann1 6 лет назад
So I pressed enter and got this atc text box on my screen. Now I can’t even fly cause it won’t go away
@gopaldesikangopaldesikan5818
@gopaldesikangopaldesikan5818 6 лет назад
Hi... while palying the game after 15-20mts its get hang up.. could you please suggest to rectify.. thanks.
@Al_Dente-d1p
@Al_Dente-d1p 5 лет назад
idiot
@fredbrull136
@fredbrull136 6 лет назад
Why did you use 10° flaps on takeof, using a decent trim setting would be easier. After watching one would be better of without ATC. Or there would be a way to put FSX ATC into X-PLANE.
@tonycheng6478
@tonycheng6478 4 года назад
For me, I don’t even use flaps on takeoff
@burgerzz09s51
@burgerzz09s51 6 лет назад
What if you are going from non atc to atx
@ericc7936
@ericc7936 5 лет назад
i hit enter right off the bat and i get a text box when i hit enter?? reset network settings and still text box?
@ericc7936
@ericc7936 5 лет назад
got it. have to click toggle atc upper right. start from gate right.
@OldSkoolLegend
@OldSkoolLegend 7 лет назад
when you see two runways and they tell you to land on runway 04 ... how do you know which one that is?
@JasonVriends
@JasonVriends 7 лет назад
If there are two side by side, it should say 04R (right) or 04L (left). If they are not side by side, then it would be 040 degrees on the compass or the reciprocal
@OldSkoolLegend
@OldSkoolLegend 7 лет назад
oooh. i see. makes sense. thanks. today i spent 5 hours practising the IFR flight... but xplane ATC is so buggy. it kept repeating the same command over and over while i was taxiing. At what point after take off do you engage the AutoPilot to follow the heading you set while you were on the ground? Immediately after you leave the ground or like after you reach 500 feet? Thanks a lot. your vids are awesome.
@MooseKicks1066
@MooseKicks1066 7 лет назад
Xplane's ATC is crap, I'm surprised he got it to work for this video. Autopilot should be engaged no lower than 500 ft AGL, but above that it is pilot's discretion.
@FusionTrain
@FusionTrain 7 лет назад
Im new to flying, What does the altimiter do? like if the atc says altimiter 2935?
@lnico92
@lnico92 7 лет назад
It tells your height in feet. So the atc is asking you to reach 2935 feet
@FusionTrain
@FusionTrain 7 лет назад
why would they just not say 3000?
@lnico92
@lnico92 7 лет назад
FusionTrain ATC tries to regulate vertical and horizontal space between planes to avoid colision. So they may ask you to follow ecotic figures if the airspace is crowed.
@FusionTrain
@FusionTrain 7 лет назад
Ah,Okay
@cmcin
@cmcin 7 лет назад
When ATC say "altimeter 2935" they are giving you the area QNH to set your altimeter to, in this case 29.35 inches of mercury. QNH is basically air pressure at sea level. Below the flight levels all aircraft set their altimeters to the area QNH so they read accurately. When operating in the flight levels the altimeter is set to 29.92 "hg.
@otdel030
@otdel030 5 лет назад
отлично!
@MegaTraker
@MegaTraker 6 лет назад
Anyone has an idea how to use ATC from v9 to v11 it would be fantastic.
@haaaaadsfggh
@haaaaadsfggh 7 лет назад
Did you use a joystick?
@JasonVriends
@JasonVriends 7 лет назад
I use the Logitech Extreme 3D Pro. It's about $40 on Amazon. I am also trying to find (or possible write) a plugin o help change the various settings without using the knobs and switches. So far, there appears to be several plugins (PlaneCommander for example) that help with this.
@haaaaadsfggh
@haaaaadsfggh 7 лет назад
Jason Vriends do you prefer a joystick or a yoke?
@JasonVriends
@JasonVriends 7 лет назад
The CH Products Eclipse Yoke would be perfect. However, it takes up a lot of desk space. If you prefer manual flying, then I would get a Yoke. However, if you would be doing more instrument flying using the autopilot, a simple joystick would be more than sufficient.
@haaaaadsfggh
@haaaaadsfggh 7 лет назад
You mean CH Products Eclipse Yoke is etter than Saitek "PRO" yoke? Cuz I heard there are lots promblem for the Saitek yoke
@JasonVriends
@JasonVriends 7 лет назад
I have used the Saitek sometime ago and it worked well with the older version of X-Plane. However, from what I read, most people prefer the Eclipse Yoke better.
@ilankrt
@ilankrt 7 лет назад
Nice but you should made tutorial flights during daylight. There are enough night sceneries on RU-vid
@ryantttt
@ryantttt 6 лет назад
thanks
@moosem1332
@moosem1332 7 лет назад
I don't have any sound with my air traffic for some reason.
@REPORODGE
@REPORODGE 7 лет назад
INTO SOUND MENU enable atc verbal
@ryantttt
@ryantttt 6 лет назад
all this game needs is orbx :)
@dollin9515
@dollin9515 5 лет назад
help! mine wont let me check in!
@Argon_02
@Argon_02 7 лет назад
I cant check in with the controller when I am at the runway :(
@tobiasjoranger3821
@tobiasjoranger3821 7 лет назад
Same, tell me if you find out something :/
@pesto12601
@pesto12601 6 лет назад
WTH... it turned you 3 different directions within 15 seconds!?!?! This ATC is garbage...
@ImazeVideos
@ImazeVideos 6 лет назад
The most stupid system i believe on 11.30 version the have fix ATC but nothing. I try yesterday and on the landing say to me to landing on 25 RWY when i was ready to land 1-2 NM say to me go to 17RWY and then again when i go around change to 25 if one system is not working it's better to remove it and i don't use ATC any more.
@tonycheng6478
@tonycheng6478 4 года назад
When X-Plane 12 comes out, the ATC might get better
@ImazeVideos
@ImazeVideos 4 года назад
@@tonycheng6478 When 12 version is ready and atc is ok, FS 2020 it will be ready and then bye bye xplane
@_Gnome.
@_Gnome. 7 лет назад
Hello mr vriends
@zacharygrossman8316
@zacharygrossman8316 5 лет назад
When I press enter it comes up with this weird type thing
@congio5624
@congio5624 5 лет назад
i have the same problem. found a solution?
@A5tr0101
@A5tr0101 4 года назад
You need to switch to single player, you are in multiplayer settings
@zacharygrossman8316
@zacharygrossman8316 4 года назад
ConGio no
@zacharygrossman8316
@zacharygrossman8316 4 года назад
Kieran G ok
@noahmcelwey2598
@noahmcelwey2598 7 лет назад
Waiting for the bombardment of "that was a horrible landing" usually said by people who know little to nothing about flying in the first place
@HowardandElaine
@HowardandElaine 6 лет назад
That wasn't horrible. He landed safely. But he should have slowed first, then applied flaps in the white arc on the speed dial. It just shows that he isn't a pilot and doesn't fly real Cessna 172s. But he landed safely.
@neondreams2337
@neondreams2337 4 года назад
@@HowardandElaine Yea, I was gonna say he was full flaps before even entering the white arc lol, scary... Not to mention went from fairly above the glide slope to 4 red lights just before landing. Although, wouldn't you also expect the ATC to provide an altitude to descend to when making that turn for approach?
@sebastiancarreras2964
@sebastiancarreras2964 Год назад
You were speeding way to much on that final approach. You even lowered the flaps outside the white arc of the flap operating range. I know it's a simulator but those decisions put you on risk of serious damage or a rough landing.
@sebastiancarreras2964
@sebastiancarreras2964 Год назад
throttle was also way too exceeded
@delalima
@delalima 7 лет назад
so with xplane 11 , no more " you are off course " message
@tonycheng6478
@tonycheng6478 4 года назад
It’s now rare to get “You are off course” message. If you go off course, the ATC will say “Fly heading”
@HowardandElaine
@HowardandElaine 6 лет назад
It wasn't really a learn to fly video. Flying by heading bug and autopilot doesn't teach any skills at all. Same with filing a flight plan and flying IFR, one of the most advanced parts of flying and certainly an optional skill for the private pilot. You can fly to Oshawa from Toronto Island with VFR, visual flight rules and normally talk to towers at both airports for takeoff and landing. No flight plan needed and no IFR. But thanks Jason for showing how ATC works. Oh, and a reminder, if you don't mind me saying so,... don't lower flaps until in the white arc speed range. Hold altitude while throttling back to lose speed before lowering flaps.
@Andy_M.S.c
@Andy_M.S.c 6 лет назад
*sigh make your own 'perfect' video before critiquing this one, your comment doesn't even qualify as 'constructive criticism'. It's obnoxious and makes you sound like a know-it-all. " Oh, and a reminder, if you don't mind me saying so" We all mind. keep it to yourself mr. Einstein.
@theirongoose4957
@theirongoose4957 4 года назад
You could have spoke us through it a bit more and talk through what ur doing step by step you kinda just went silent for a hot minute between actions
@MegaTraker
@MegaTraker 6 лет назад
The ATC from the x-plane 9.70 is a lot better than this one I am looking at getting vatsim to elliminate this useless ATC got plenty of time on it and i now fly without ATC I am using the moving mapinsread
@tonycheng6478
@tonycheng6478 4 года назад
I guess X-Plane 12 will get a better ATC when it get released
@MegaTraker
@MegaTraker 4 года назад
@@tonycheng6478 I sure hope so I am using the P2Atc it is good but same thing it is x pensive and it do not work perfectly so to my on view ATC.9.70 was working fine ex if you would declare an emergency ATC would direct you to closer air strip or air port. Let's hope for the best.
@officergregorystevens5765
@officergregorystevens5765 6 лет назад
Lol that default female voice is so annoying to me. It's her intonation ro something .. inflection. Somehow someway my X-Plane 11 ATC window disappeared. I think maybe installing pilotedge plugin did it by binding to the enter key the "show atc" or whatever macro it is. Thanks. Btw PilotEdge gives you a free like 14 day or so trial as far as I can tell, ... I gave em a credit cardnot linked to any actual funding though to hold which they require. They have FAA-certified controllers over the whole Western half of the USA basically you can use in real time. Of course they're not always on or covering every air space or tower or tracon and so on but its pretty good from what I can tell. Ill never go back to FSX.... X-Plane is too much like the real thing in terms of flying. I just issue myself ATC commands if I'm on the East Coast or elsewhere.. lol. It works for me.
@xVoLxPaYnE
@xVoLxPaYnE 7 лет назад
lol cross rwy 4, hold short of rwy 4...
@shivraja3955
@shivraja3955 7 лет назад
They mean runway 04L and 04R, 2 different runways
@pesto12601
@pesto12601 6 лет назад
There is only one runway 4 at this airport.. so - you are wrong. ATC sucks in Xplane!
@fredbrull136
@fredbrull136 6 лет назад
Eric Clifford listen carefully guys crossing and holding 4 is for XP and not for SP.
@scaryshrok7055
@scaryshrok7055 6 лет назад
It doesn't eaven work
@xplane11pilot82
@xplane11pilot82 6 лет назад
124 atc is better
Далее
X-Plane 11 - Using a Garmin 530 GPS
13:18
Просмотров 279 тыс.
X-Plane 11 - Cessna 172 Autopilot [updated]
30:12
Просмотров 90 тыс.
This is how Halo felt as a kid 🤣 (phelan.davies)
00:14
X-Plane 11.30 ATC | Full Tutorial
23:31
Просмотров 143 тыс.
X-Plane 11 - Using Air Traffic Control
26:42
Просмотров 346 тыс.
X-Plane 11 - Using Auto Pilot Ottawa to Montreal
45:29
X-Plane 12 Dev Deep Dive - Ep 3: Air Traffic Control
34:16
X-Plane 11.30 ATC
6:04
Просмотров 135 тыс.
X-Plane 11 Flight School #4 - The ILS Approach
17:42
Просмотров 155 тыс.
X-ATC-Chatter 1.7 Tutorial
45:59
Просмотров 6 тыс.