Yamaha RX-1 Overheating Cure Heat Exchanger

Подписаться 1,5 тыс.

Просмотров 3,3 тыс.

50% 1

#yamaha #snowmobile #yamaharevsyourheart Yamaha RX-1 Overheating Cure Heat Exchanger. We install the rx1 heat exchanger from the 2005 model to cure an overheating problem
Get the parts I use below:
50/50 ready to use andtifreeze: amzn.to/3Wqkxib
Yamaha RX-1 accessories: amzn.to/3ExzNn0
Lock and Lube no leak zerk adapter: amzn.to/3xVemZv
Chain case oil: amzn.to/3vnlZ8F
DISCLAIMER: Not liable for anything you attempt after watching one of my videos. Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content!

Хобби

Опубликовано:

5 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 3

@mikewilson7132 Год назад

i need to do that 2 my nytro took my hood off then it didnt have warning light on

@davemarin2760 Год назад

do you have to remove the bleeder completly and start up the ski doo and make it run to get out all the air in the prestone pipe

@MiloFarms Год назад

When I first filled it with antifreeze I had it sitting flat on the floor and completely removed the bleeder screw till the antifreeze came out. Then I overfilled the antifreeze reservoir to the brim and put the lid on. I just loosened the bleeder screw and got some more air out. Then I started the sled and tried different positions with the back of the sled lifted in the air and on the ground just slightly opening the bleed screw till all the air was gone. It is very important to get all the air out. The same process will have to be repeated every few years when you change the antifreeze.